Getting multiple Mobile device quarantine notices for previously approved devices.

Recently we have started getting multiple notices to the user and to our help desk about a device being quarantined that is not. I've got one user getting them about every 15 minutes. When I use the following powershell this user is not listed
Get-ActiveSyncDevice -filter {deviceaccessstate -eq 'quarantined'} | select deviceid, userdisplayname
i've also had devices show up in the ECP that are not consistant with what shows in the above command and i've been unable to approve them to clear them so I blocked them instead which clears them then I fix them with powershell if they should be approved.
I am at a loss as to where to look and my users are getting annoyed by the spam. I'm about to turn off device quarantine to "fix it" but i'd rather not.
Oh and right now at least these are all iphones 
Thanks for any assistance.

Hi,
From your description, users are quarantined despite they are in Allow list.
Please create a new policy and apply to a test user that this happens
to often, and see if they still get
quarantined.
And please enable Mailbox Logging for ActiveSync to check result.
http://blogs.technet.com/b/jasonsla/archive/2013/03/19/exchange-activesync-mailbox-logging.aspx
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

  • I'm having trouble reinstalling itunes on my Windows XP, get Apple Mobiles Devices failed to start, Verify Sufficient privledges. What do I need to do?

    Trying to reinstall iTunes, get Apple Mobile Device failure to start-Verify sufficient privledges error. What do I need to do.

    Hey CarleneS,
    First, I would try the steps in here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    If you end up having to remove and reinstall iTunes, make sure you follow all of the steps in this link:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • I can't get version 11.1.4 to install because it fails to get the Mobile device program.  I don't have any mobile devices.  How can I overide this so I just get iTunes on my PC?

    I cannot get iTunes 11.1.4 to install.  I have tried uninstalling iTunes and downloading itues again witha manual install. It always fails because it cant get the mobile device part to work.  I am the administrator and I don't have ANY mobile devices.  I just want to update the program on my PC - and now I don't have any iTunes at all.

    The best information on dealing with the iTunes install is in the user tip: https://discussions.apple.com/docs/DOC-6562

  • I am unable to reinstall iTunes.  I get the message it was not installed correctly.  "Please reinstall itunes (Windows error 126)"  Also get "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services."

    I am unable to reinstall itunes.  I get the message that it was not installed correctly.  I HAVE DONE A SYSTEM RESTORE, I HAVE TRIED TO REINSTALL SEVERAL TIMES ALSO.  I get a error message that it's "Windows error 126".  Also get "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services." 
    Help!

    Click here and follow the instructions.
    (98993)

  • How do I get my mobile devices to update my itune tunes?

    How do I get my mobile devices to update my itune tunes with the cloud?

    Can you explain more about what you are trying to do?  I'm not sure what you mean when you say you want to update your iTunes music with the cloud.

  • Some users continue to get overdue notices for an approval workflow.

    Some users continue to get overdue notices for an approval workflow that has already completed and approved. How to stop the overdue notices. And there are no tasks running in the task list.
    Thanks
    Ramanjjilu Naidu

    Rama,
    Usually these happen from restored/QA env which give us false impression.
    Check similar thread - 
    SharePoint
    Approval workflow Overdue emails after workflow completion
    Overdue
    task reminder even after task /library deleted
    Task
    overdue emails even after deleting all tasks
    Workflow
    Task overdue notifications
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • First sync attempt get "Apple Mobile Device is not started".

    When I attempt to connect a new itouch to sync with itunes I get "Apple Mobile Device Service is not started" unable to connect. The computer runs Windows 7 and itunes is up to date and works with 3 other devices (ipad1,nano 5th gen, iphone 4). I also get the same message when i try and connect an old iphone 3. I cannot find anything on this issue. Please advise. I am not currently using icloud with any device.
    Thank you!!

    http://support.apple.com/kb/TS1567
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Can't install new itunes upgrade on Windows 7.  Keep getting Apple Mobile Device Service timed out

    Ever since the new upgrade of iTunes came out I can no longer open iTunes.  I have uninstalled and reinstalled numerous times to no avail.  I keep getting  the Apple Mobile Device Service warning that it timed out.  I go into Services and I can't start the mobile device there either.  I have followed every suggestion online and still can't get it to work.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • When trying to install iTunes 8.2.1, I get a Mobile Device Support error

    When I run the iTunes 8.2.1 Installer, everything works fine until it starts the actual install process, when it prints out the error "run preupgrade script for Apple Mobile Device Support. Contact the software manufacturer for assistance." I have some experience with Macs, but this is new for me.
    Also, i tried downloading iTunes straight from the website, but I still get the error message.
    Please help I got a new iTouch and it wont sync unless i upgrade i need help!!!

    Hello there,
    I'm experiencing the same problem with the latest upgrade of itunes 9.0.1.
    It starts the installation process and then i get this "failed installation" message
    "run preupgrade script for apple mobile device support"
    Have you been able to solve the problem? And if so how did you?
    thanks,
    M

  • How can I get Apple Mobile Device to appear in the Administrative Tools\Services folder?

    My iPhine still won't sync with iTunes. I was instructed to go to Control Panel\Administrative Tools\Services to locate Apple Mobile Devices, but it isn't there. How can I get it there?

    See Here...
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • What is best way to active sync large quantities of files on work PCs across multiple mobil devices of employees in the field?

    I am looking for the best way for us to file share between our PC and mobil devices?  We have tons of PDF files and would benefit from being able to view/edit while in the field but are not sure of the best way to do so…
    - iCloud drive isn’t ideal because it requires everyone to have and maintain their own files via their individual devices and iCloud addresses
    - Dropbox seems to work, but it doesn’t actually store a local copy of the files so we have to load each time to view and their document viewers are not the most user friendly
    - Google Drive we used a long time ago, when it first came out, and it kind of worked well, but due to the volume of files and size of folders we constantly ran into crashing issues and sync problems so we gave up on it…
    Ideally we would like to have local folders on our desktop that activesync to our mobil devices… Do you know of a way that this would be possible or do we need to purchase one of those large, robust field management programs?

    Hi Bob.
    So what I should have done on my PC for all my files is gone to the File menu and used the Package command which would have converted it into a file with the images in it so they wouldn't need to be relinked.
    From now on I will only be working on Mac (I gave away my PC) but I'm sure I could use a friend's pc (or at a later point install Windows on my Mac). But to use the Package command on PC I need to actually have the images in the correct folder on the PC right?

  • Unable to install Itunes,getting Apple mobile device error

    Itunes wouldn't launch so I tried to reinstall it and I am consistently geting the error message that "Apple Mobile Device failed to start, verify you have sufficient privilages to start sytem services.  I have deleted Itunes, emptied the temp folder, restarted several times and still getting the same error. I am running Windows 7 Home Edition

    Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

  • Cant get Apple Mobile Device to start since recent update

    In my contol panel servies its already set to automatic and start is the only option it will allow me to do and when i do that it says the AMD serivce on local computer started and stopped, some services stop automatically if they are not in use by other programs.

    "The apple mobile device service on local computer started and then stopped. some sevices stop automatically if they have no work to do for example the performance logs and alerts service."
    Although the following document is usually a better bet with a 1067 error when starting AMDS, it might also be worth a try with your one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Downloding getting Apple mobile device error

    I had to re install Itunes due to an error and it not opening. I tried to re install but kept getting the following error Service apple mobile device failed to start Verify that you have sufficient privileges to start system services I click retry yet the same thing comes up. I have since uninstalled Itunes and atempted to fully install it all again but I still get the same error. What do I need to do to resolve this so that I can have Itunes on my laptop again?

    Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

  • Msvcr80.dll error- When uninstalling apps, could not get the mobile device support app to uninstall

    MSVCR80.dll error/windows 7/  lost Itunes.  Tried to uninstall applications- Itunes, apple software update, sucessfully but Apple mobile device support would not uninstall so I could not continue uninstalling the rest. 
    Anyone have any ideas??

    Hey dhmacgowan,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

Maybe you are looking for

  • I can't see AP on WLC

    Hi, I'm trying to find out why my APs can't join to WLC. Both are in the same Vlan, AP has a static IP (the same subnet). Thanks for any advice (Cisco Controller) >*spamApTask1: Oct 24 21:13:25.715: 4c:4e:35:c7:0f:ab CAPWAP Control Msg Received from

  • Problem "The version of the server you are trying to connect to is not supported."

    Hi, I connected a portable hard drive to my Airport Extreme. I can see the hard drive in Airport Utility / Disks but I'm getting an error when I try to connect this disk from Finder / Network / Airport Extreme. I googled and didn't find a solution. H

  • Are there any apps that work with the G2 to block calls reliably?

    I know this subject has been covered but, I have been using Call Control for years since I bought Pro way back when.  Worked fine up until I got the G2.  Now it says that the only proven method of blocking calls is using MUTE CALLS.  The send to voic

  • Why use 1Gbps fiber port over a 1Gbps Ethernet port?

    Say I have two switches and I want to connect them together. Both are capable of 1Gbps speeds and both are Layer 2 only switches. And no VLAN setup either. I install an SFP 1 Gigabit interface transceiver on both switches. Since the switch is already

  • Data Modeler and procedures/functions

    The export to DDL function generates DDL with a summary listing the number of objects created. "Procedures" is one of the objects for which it lists a total, but I don't anyplace to actual create or manage procedures. Where are the procedures?