Getting parsing exception messages in another language

I am using the Oracle XML SAXParser for Java to validate an XML document against a DTD, and I want to display the result to the user. Is there a way to get the parsing errors/warnings in a language other than English? What languages are supported? Thanks.

You can get localized messages using the setLocale method. The listing of countries and languages is in the README.HTML.
Oracle XML Team

Similar Messages

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Why do I get a popup message in multiple languages requiring a shutdown and restart

Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.

After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

When i run report through OC4J Application i get a exception message

When i run report through OC4J Application i get a exception message saying Server returning invalid xml and the exception number is JBO -29000. The Reports Server is installed on machine having IP 10.191.99.254.
Below is the exception message:
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: java.io.IOException, msg=Server returned HTTP response code: 500 for URL: http://10.191.99.254:8888/reports/rwservlet/showjobidnull
Anybody Please help me out with this issue.....because I am really fed up with this problem....want some urgent help.....
One possible workaround which I could make out is there needs change to be made in the .rdf files in Report Builder and then inside the User Parameters we change the Initial Value to * from % because the Reports Server encodes every value as %Initial_Value% and hence if the initial value for the parameter is % then it does not get a valid value and hence it returns as an invalid xml
But unfortunately it seems this workaround does not work.Please help as soon as possible.

Hi,
you said that some changes were made in the .xml files but i had said that all the files present in Reports Developer or Reports Builder are .rdf files and I had made changes in the .rdf files for this articular report and then compiled it thereitself and then ran a paper layout of the report but the report did not comprise any data.
There was sufficient data also to populate the report. So this may not be a database issue. Please help if you can ASAP.

When i try to download, i get an error message saying unsupported language. It says it can only download in English, English is my language.

When i try to download, i get an error message saying unsupported language. It says it can only download in English, English is my language.

What exactly are you attempting to download and where are you located in the world?

Error getting application exception message from client EJB 3

Hi, somebody nkow what is the error?
I have this simple session bean deploy in a jboss 4.0.5 GA application server
My interface:
package server.ejb.usuarios;
import javax.ejb.Remote;
@Remote
public interface Prueba {
     public void getError() throws Exception;
}My Session bean implementation:
package server.ejb.usuarios;
import javax.ejb.Stateless;
import server.ejb.usuarios.Prueba;
public @Stateless class PruebaBean implements Prueba {
     public void getError() throws Exception {
          throw new Exception("Mensaje de error");
}Simple, i can deploy this bean on my application server, now i have this client code:
package clientold;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import server.ejb.usuarios.Prueba;
public class MainPruebaError {
      * @param args
     public static void main(String[] args) {
          Context ctx;
          try {
               ctx = getInitialContext();
               Prueba pruebaSession = (Prueba) ctx.lookup("PruebaBean/remote");
               pruebaSession.getError();
          } catch (NamingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch(Exception e){
               System.out.println("Get error from server: " + e.getMessage());
               e.printStackTrace();
     private static Context getInitialContext() throws NamingException {
          Properties prop = new Properties();
          prop.setProperty("java.naming.factory.initial",
                    "org.jnp.interfaces.NamingContextFactory");
          prop.setProperty("java.naming.provider.url", "127.0.0.1:1099");
          prop.setProperty("java.naming.factory.url.pkgs", "org.jboss.naming");
          return (new InitialContext(prop));
}and my client catch the exception but i can�t get the correct exception message. I need pass custom message from my server to my clients and wrap it in a exception, but when i run this example got the next output:
Get error from server: [Ljava.lang.StackTraceElement;
java.lang.ClassNotFoundException: [Ljava.lang.StackTraceElement;
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at org.jboss.remoting.loading.RemotingClassLoader.loadClass(RemotingClassLoader.java:50)
     at org.jboss.remoting.loading.ObjectInputStreamWithClassLoader.resolveClass(ObjectInputStreamWithClassLoader.java:139)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1575)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
     at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1624)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1323)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     at org.jboss.remoting.serialization.impl.java.JavaSerializationManager.receiveObject(JavaSerializationManager.java:128)
     at org.jboss.remoting.marshal.serializable.SerializableUnMarshaller.read(SerializableUnMarshaller.java:66)
     at org.jboss.remoting.transport.socket.SocketClientInvoker.transport(SocketClientInvoker.java:279)
     at org.jboss.remoting.RemoteClientInvoker.invoke(RemoteClientInvoker.java:143)
     at org.jboss.remoting.Client.invoke(Client.java:525)
     at org.jboss.remoting.Client.invoke(Client.java:488)
     at org.jboss.aspects.remoting.InvokeRemoteInterceptor.invoke(InvokeRemoteInterceptor.java:41)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.aspects.tx.ClientTxPropagationInterceptor.invoke(ClientTxPropagationInterceptor.java:46)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.aspects.security.SecurityClientInterceptor.invoke(SecurityClientInterceptor.java:40)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.ejb3.remoting.IsLocalInterceptor.invoke(IsLocalInterceptor.java:77)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.ejb3.stateless.StatelessRemoteProxy.invoke(StatelessRemoteProxy.java:102)
     at $Proxy0.getError(Unknown Source)
     at clientold.MainPruebaError.main(MainPruebaError.java:21)What is the problem??, i must see on the output
Get error from server: Mensaje de errorbut i have :
Get error from server: [Ljava.lang.StackTraceElement;why???, is only a simple application exception and don,t work, somebody can help me??
i have tried to use an interceptor class for get the exceptions and work, but without interceptor, dont work
thanks

I can resolve this problem change the JDK version used to develop my clint application and to run the jboss application server.
Current, in JBoss 4.0.5, the JDK requirement is JDK 5, and i was using JDK 6.

Getting report out put in another language (other than english).

Hi all,
can any one help me out in getting report out put in proper language (english).
actually i am running my layout through wizard.it show in english at report level but when i publish with oracle application it showing the out in another fassion.
please kindly help me out in this issue.

In the language preference panel of the system preferences?
LN

Need exception messages in english language

Since my application is running for different european users, the exception messages are half in english language and half in the user local language (e.g. German, Spanish, Danish and so on). What I need is to have the whole exception message in english. Is there any way to do that?
JBO-26048: Vincolo "PK_CUSTOMER" violato durante l'operazione di invio:"Insert" con un'istruzione SQL "INSERT INTO VC_CUSTMAIN(COU_ISO_COD,ISO_DESCR,CUST_COD,CUST_LEVEL,CUST_NAME1,ZIP_COD,COUNTRY_COD,COUNTRY_DESCR,
VAT_NUMBER,SAME_CARD_EXPIRY,BL_STATUS,BL_REASON_DESCR,SPECIAL_ACCOUNT,BRANCH_DESCR,CO_COD,
CO_DESCR,ABR_VAT_REFUND,ACCOUNT_DESCR,MARKET_DESCR,REGION_DESCR,SALES_AREA_DESCR,SALES_SUB_DESCR,
OCCUP_DESCR,OCCUP_GRP_DESCR,LANG_COD,LANG_DESCR,CORR_DATE,CORR_LOGIN,INFO_HANDLER,HANDLER_CO_DESCR,
CREATION_DATE,CREATION_LOGIN,WORKINGISO,CARD_PROG) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18,:19,:20,:21,:22,:23,:24,:25,:26,:27,:28,:29,:30,:31,:32,:33,:34)".
ORA-00001: unique constraint (IDS2015.PK_CUSTOMER) violated ORA-06512: at "IDS2015.T_IO_VC_CUSTMAIN", line 99 ORA-04088: error during execution of trigger 'IDS2015.T_IO_VC_CUSTMAIN'

You can force English locale by starting java with the user.language system property. For example:
java -Duser.language=en
Thanks,
Brian

Message in another language in SBWP

Dear experts,
In one of our workflows, when it is triggered, it sends two messages to the inbox (SBWP) of the approver. One of them is a message of decision to approve or reject the workflow. The 2nd message is informative, just saying that a task with an ID number (number of the workflow) has started. Curiously, this message is in croatian, but I´m logged in in Spanish (ES).
I wonder how can I erase this message, or translate it to Spanish, because the programs in SBWP are all standard SAP, no Z programs exist, so in theory everything should be in the log in language. So does anyone know what might be the cause of the problem?
Thanks.

Hi,
You need to maintain the language translation while developing the workflow.
For this purpose..
Run Tcode SWDD...
Enter your workflow template number.
Now select Extras form menu bar.
Here you can find the option 'Translation' ,
Now select Translation >>> Translation
You will get an popup "Source language " to "Target language"
now maintain translated sentences'.
Save and activate.
For example if you logon in Spanish Language ( if maintained ) and check the workflow definition. You can observe that for the two step types, the text is available in German.
Thanks and regards,
SNJY

When setting up my Time Capsule I get an error message that another device is using my computer's IP address. What can I do about this?

When I am setting up my new Time Capsule I get a pop up window that says another device is using my IP address and I have to change it. My time capsule will not work or connect to the Internet. I assume that is why. Everything is plugged in as should be. I also have a wireless DVD player and my DISH network plugged in to the Ethernet of the Time Capsule.

You need to do the setup of the TC before you plug it into the network.. you obviously already have a router, so set the TC up as bridge device.. in airport utility/internet tab/connection sharing.. off bridge mode.. then you can plug it into the network and whatever is main router will do its job properly.
If this is not the case, then you have a static IP setup somewhere.. or another dhcp server.. track down and remove it.

How to get detailed fault message in business process when exception?

In bp, I use "catch all exception" to handle exception. When exception, I get fault message from all of component and write them into log files. But no matter which component throw exception, I cannot get any detailed message, the string writed into log is always null. Why? server.xml has all detailed message and printstack and why cannot I get?

Hi,
As far as I know, it's not possible to get the exception message with a catch all. You need to catch each exception separately, and the you will be able to get each message.
Regards
Gustavo

MRP exception message 64 and planning strategy group 52

Hi Gurus,
I have done extensive search online in the forum to find the route cause why we are getting MRP exception message 64 for a specific material in one of our plants. This exception message does not occur for the same materials which is also produced in another plant.
I was just wondering whether the planning strategy group of 52 in MRP 3 view would have any effect on the frequent occurrence of exception message 64. I know that the 64 message occurs when the routing time is higher than the in house production time. If that's the case where to look for in routing to correct this, apart from this do we need to look at work centers and other details. I'm not a PP person but still was curious to know see if i could take a shot at it.
Also the MRP settings that we follow in the plant where this problem does not occur is NETCH, Create PR - 2, Schedule lines - 3, create MRP list - 1, Planning mode - 3, scheduling -2
in the plant where the 64 message occurs quite often is Netch, Create PR -2, Schedule lines - 3, create MRP list - 1, planning mode - 1, Schdeduliing - 1
I was thinking do MRP settings and planning strategy group would have any impact on why we are getting the 64 wexception message
Because of this 63 exception message, the downstream components are getting wrong signals.
Thanks
Ravi

Hello Ravi
Generallt, exception message "64 - Production finish after order finish" is triggered when the order start date is in the past and system automatically changes to forward scheduling to calculate the finish date.
Note 1913017 explains how the order basic date is calculated and adjusted in case of forward scheduling, however, you are using strategy 52 and this is a very special scenario, whever VP planned orders are generated.
The VP planned orders will always be adjusted to the requirements date even if the requirements date is in the past. This is a special feature in the planning segment, since these orders are only kind of 'virtual' planned orders. These orders only have to provide the demand requirements for the components in time.
Therefore, there is a relationship between strategy 52 (VP planned order) and the exception message observed.
BR
Caetano

Exception message 26, (only warnning not an error mesage).

Dear Experts
my environment is MTO, which generates a huge number of production orders daily with a big number of exception messages which some times are not enough to adopt the PP activities on the system,
in the case of (Procurement type:X) which the planned order for a HALB or FERT, material can be produced internally or procured externally, i can partially convert a part of the total quantity into a production order or a purchase requisition and so the remaining qty, into any of the both procurement proposals.
now if the total quantities of the partially converted production orders and purchase requisition, is exceeding than the planned order qty, i am getting the exception message 26, (only warnning not an error mesage).
my requirement: i want the system to restrict users to covert the planned order into a production order or a purchase requisition if the total quantities of all the partially converted production orders and purchase requisitions are exceeding more than the original planned order quantity.
Example:
planned order qty, is 10 EA, if i convert a qty, of 3 EA into a partial production order and another qty, with 4 EA into a purchase requisition,
system must restrict me to convert the remaining qty, into a production order or a purchase requisition if i changed the qty, to a qty, exceeds more than 3 EA.
Thanks in advance.

Ahmed,
Exception message 26 is neither a warning nor an error. It is an alert that a certain business condition exists (excess stock in a segment). The general rule for exceptions is that it is up to the planner to determine the significance, and to use your company's business rules to react accordingly.
The solution to your stated requirement does not exist in standard SAP. To me, it makes no sense to lock the system down in this way. Message 26 can come from overconversion, but it can also come if the requirements are reduced.
If you still feel that this functionality must be implemented, I would suggest this partial solution, that uses standard functionality. Have your planners perform only the conversions of the plndords to firmed purchase reqs, for a given time frame, all at one time, and decline to convert the remaining balances to production orders. Then, re-run MRP with delete/recreate. This will create planned orders for exactly the balance(s) required. Then, you could immediately use the standard mass program to convert the 'balance' Planned orders to Production orders. The mass conversion could be the second step of an auxiliary MRP job.
If you insist that the requirements must be met using the method you indicated above, then it implies that every program that could be used to convert a PlndOrd to something else must be modified. I don't think I would attempt this unless there were no other possibilities.
Best Regards,
DB49

Exception messages....how do YOU eat yours??

Exception Messages - For user or developer?
Summary
When catching Exceptions, is/should it be necessary to look at the message String for deciding what action should be taken or is the message just for humans?
What is the generally accepted use of Exception messages - user messages, or for deveopers and program parsing?
Details
Exceptions generally contain some kind of 'useful' message.
As we are developing our programs we, as developers, might be able to use this message to help diagnose problems.
But once we've finished development and come to deploy our program we will, of course, be catching all possible Exceptions so that the user does not get thrown out of the program in a very undignified manner.
When catching these Exceptions, what 'should' be done with it?
Wrap it up as a neat little Error message for the user?
Or are they there for programs to 'read' themselves and decide what to do next depending upon the potentially dynamic message String?
thanks,
John
([email protected])

In addition, when you start thinking about parsing exception messages to further determine the facts behind the exception, it makes me wonder if you aren't forgetting to check your variables to further determine the problem, and also to take advantage of defining your own custom exceptions to further refine your handling of the errors that are unique to your program.
Let me give a cheesy (and purely conceptual) example to describe what I mean.
Your program is simulating cooking pizza's, let's say. At the end of the baking process, you catch an array index out of bounds exception as a basic beginning.
Now, upon finding something unexpected wrong with the array of pizzas that you were expecting from the oven (within the catch block), you check for the conditions that help you refine your understanding of what went wrong.
So, you test 'was the array null?' ...which means nothing at all came out of the oven, in which case you throw your custom "OvenWayToHotException", with a warning for the cook to turn down the heat. If the array was NOT null, but just had less values than you expected ...you can then throw your "PizzaLeftBehindInOvenException", with a warning for the cashier to go check the oven because someone forgot a pizza inside. These further refined exceptions are then thrown up the chain to the portion of your code that presumed to cook the pizzas properly before giving them to the customer.
In the end, the message to either �check the oven for missing pizzas� or �apologize to the customer while they wait for you to redo their whole order� will be a lot more informational than �ArrayIndexOutOfBoundsException at method cookPizzas()�
I realize this might be a cheesy example, but maybe it demonstrates a technique for using base exceptions as a beginning point for determining programmatically what went wrong, and then handling it from there. Further inspection of variables is more likely how your program will figure out what went wrong rather than parsing the message in the rare case that it contains unique information. You, who wrote the program, usually know exactly what it means when certain groups of variables are found in certain states. Exceptions are a way to avoid doing a bunch of unnecessary tests until you get an indication that these tests are actually required in the first place.
Of course, having said that, you are also free to be creative when you design code ...so if what you are doing works better than any other approach you can think of ...then using any idea you can cobble together is probably better than throwing the program in the trash bin, wouldn't you say?

Overrid JBO messages in multiple languages

Hello,
platform : JDev 10.1.2 with UIX
We need to have custom error messages for my application.
In Jdeveloper help in section 'Customizing Error Messages ' the mechanism to override existing JBO messages in well documented.
BUT. How to translate these messages to another language, French in my case?
because I get the default JBO French message.
Any pointers and sample code will also be helpful.
regards
Sanjiv

For displaying message, it better to use message class instead of using otr.
Using transcation se91 create a message class and messages, this can be called in WDA
get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager
report message
CALL METHOD lo_message_manager->report_t100_message
    EXPORTING
      msgid                    = (Name of the Message Class)
      msgno                    = (Message Number)
      msgty                    = (E - Error, W - Warning...)
     p1                       =
     p2                       =
     p3                       =
     p4                       =
     msg_user_data            =
     is_permanent             = ABAP_FALSE
     scope_permanent_msg      = CO_MSG_SCOPE_CONTROLLER
     view                     =
     show_as_popup            =
     controller_permanent_msg =
     msg_index                =
     cancel_navigation        =
This will display the message in logon language.
Thanks
Vishal

Getting parsing exception messages in another language

Similar Messages

Maybe you are looking for