Getting PRKS-1009 error when running DBCA &

I'm trying to configure my first Oracle setup and it's requiring RAC to be in place.
When I run dbca & to configure the clustered database I get the PRKS error on both nodes, which then does not allow me to find my previously created ASM disks.
I have searched through the forums and internet for solutions but everything I found had to do with people getting this error post installation on a reboot.
Any ideas or places to begin looking?

Hi,
Were prerequisites applied sucesfully ? (OS patches, kernel settings,etc)
J

Similar Messages

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

I am getting a framing error when running a VI via RS-232. Any thoughts?

I have a Keithley 2700 multi meter and am trying to get its IDN. I am getting error number 800, on the multimeter, back when running the VI

A framing error indicates that you don't have the same serial parameters set the same on the pc and on the instrument. Double check baud rate, parity, data bits, and flow control and make sure they match.

Get Internal Server Error when run the site

the url of my site is :
http://webdb.us.colorcon.com:7777/pls/portal30
everything ran fine till yesterday. but i also created 2 new sites as follows :-
http://webdb.us.colorcon.com:7777/pls/prtltest http://webdb.us.colorcon.com:7777/pls/prtltran
the prtltest is a test site and
the prtltran is a training site
but when i log in to my original site today, i get Internal Server Error. i did the troubleshooting and the following URL failed :-
http://webdb.us.colorcon.com:7777/servlet/IsItWorking
the troubleshooting guide on OTN says the following maybe the cause :-
The Apache JServ is not working correctly. Most "internal server errors" are related to Apache Jservs failure to start.(usually due to a port conflict).
Please look at the following log files for details: Apache Listener log files in IAS_HOME/Apache/Apache/logs, and the
Apache JServ log files in IAS_HOME/Apache/Jserv/logs.
is it because the newsites share the same port number 7777 as the existing ones ?
i looked at the log files and all it says is, some files not found.
is there anything else i seem to be missing ?
any help wouldbe appreciated.
thanx
null

Are you using multiple listeners or just one? If you have multiple listeners, then you need to update the jserv.properties file for each with a distinct port. The default is 8007.
If you are using one listener (which you can do) then the apache/jserv configuration is is wrong. What are the files that it says are missing?

Open wallet failed error when running DBCA

Hi,
running 9i on AIX 5.3
By starting dbca, get the Error Message 'Open wallet failed'
The dbca GUI comes up and runs fine.
Anyway in case anyone has the problem please let me know...
The wallet entry is in the sqlnet.ora
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY =/ora01/admin/DB_01/wallet)
Thanks in advance

See Note:369562.1 ERROR: Open Wallet Failed when starting NETMANAGER/NET CONFIGURATION, it states that the message can be ignored (the Note mentions DBCA too).
HTH
Enrique

Getting time out error when running the assigned verification in DRM 9.3.2.

Hi,
I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
Please suggest a solution for this issue.
regards,
sathiya

Please suggest me the solution.
regards,
sathiya

Get a connection error when running a BODS job

Hi All,
I have BODS system setup in my environment. There are quite some jobs that run everyday. The jobs have stopped running since the last days. The jobs arn't failing, but they do not run.
When I try to Execute a job, I get the error "Connection Refused: connection". When I Test the connection from BODS to CMS, it is working fine. Also, from the BODS/BO server I am able to connect/ping to the DataStore servers. My Datastores are SQL servers and ECC also.
I do not know what is the resolution for the issue.
Thanks,
Amrita

Hi Manoj,
We recognized the issue was at the OS level, in the "Data Services"-OS Service.
The BODS jobs are running fine now.
Thanks,
Amrita

Why am I getting Installation Failed error when running Install package?

Enterprise license holder here. Mac. I've installed ccplauncher, run it, and am now trying to run the Install.pkg. I'm getting an error:
Already tried running disc permissions, still nothing. Erased all old versions of CS (5, 5.5, 6) from my HD using AppCleaner so no resources or plists left behind before installing CC.

Jeff,
You may want to use /Utilities/Console and look at /Library/Logs/Adobe/Installers to see where the failure is actually occurring. Even though it's one install package, it's installing each application in sequence. If only one fails (and all the others succeed) you'll still see the message you received. There can be a lot in the logs, but you can use the Spotlight field to filter out the lines with "return code." Anything other than "0" (zero) indicates something that didn't complete. You can also look for words like "error" or "fail".
There are a bunch of things that can cause an error. I've sometimes had a problem with packages that include a lot of updates but rebuilding them seemed to fix it. Finding out exactly where the error is happening is a big help when you contact support.
I realize this isn't a solution, but hope it helps.
Ric

Why I get "Error in getting session data" error when running report?

Hello,
I have reporting services on one server, and SharePoint 2010 on other server. When I view report from browser, I got blank page. From Report Server Log file, I got below error:
v VERBOSE: writting session cookie: ekkrjbubp00t5wzc3rzspvzb
v VERBOSE: Saved report snapshot to session in a background thread <for same session id>
e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.;
e ERROR: Error in getting session data: Expired Session: ekkrjbubp00t5wzc3rzspvzb
e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: , Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: The report execution ekkrjbubp00t5wzc3rzspvzb has expired or cannot be found
Are there anyone getting the same issue as mine? I did not see any solutions for this issue when I searched.
Thanks,
Megan

There are a number of timeouts in SSRS; session timeout, report execution timeouts, http request timeouts. A session timeout in SSRS is not the same as a session timeout in ASP.NET. Below are some articles that can help you understand the timeouts
and hopefully lead you down the path of discovery.
This articles is a good article as it discusses the session timeout and the keep alive that is sent from the report viewer.
http://blogs.msdn.com/b/jgalla/archive/2006/10/11/session-timeout-during-execution.aspx
This article is good as well in describing some of the timeouts.
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

Getting a runtime error when running the test project

I was running a test project which did execute without any problems. Then I added 2 extra DLLs and wrote some code as well. After that I got the below specified run time error. Though I removed those DLLs and new code still it doesn't run. This was running
fine though. Please advice.
Warning: Test Run deployment issue: The assembly or module 'Npgsql' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'IBM.Data.DB2' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
Warning: Test Run deployment issue: The assembly or module 'Oracle.DataAccess' directly or indirectly referenced by the test container 'g:\services\communityservice\communityservicetest\bin\release\communityservicetest.dll' was not found.
mayooran99

@Mayooran99,
I agree with Andy. By the way, when you build a new test project and if you want to add dll to your project, please make sure you will follow this article:
https://msdn.microsoft.com/en-us/library/wkze6zky.aspx
When you use Add reference dialog please don't forget to set copy local to true.(By default I think new project will not have this problem, the reason may like Andy mentioned that you still have some references to those two dlls when you removed them)Best
regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting WUC-24 error when running sample form WU_TEST_106.fmb

Hello all,
To learn more about using WebUtil, I downloaded the WU_TEST_106.fmb form and compiled it. I wanted to try writing to MS Word file. I ran this form, when the form got loaded, I clicked on the 'OLE' tab and then typed in my message and clicked on the 'Write to Word' button. Nothing were ever written to the temp.doc file. When checked the jinitiator13117.trace file, I saw four instances of 'WUC-24 - Error reading URL' error message. Any ideas what is causing the WUC-24 error messages.
Thank you for your input,
Seyed

Thank you so much for your help. I worked with our DBA to fix this bug. From the section you pointed out in chapter 2.5, we copied the virtual-directory line and added the real-path and pasted that line into the onion-web.xml on C:\DevSuiteHome\j2ee\DevSuite\application-deployments\forms\form90web directory.
The added line looks like the following:
<virtual-directory virtual-path="/webutil" real-path="C:\DevSuiteHome\forms90\WebUtil" />
This resolved the WUC-24 error message. Once again, thank you for taking time to help me with fixing this error.
Seyed

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

Error when running a report in BPC NW

I am getting the following error when running a report for my application in BPC NW.
EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could not make much out of it.
Appreciate any assistance.

Sanjay,
This is a very generic error...Couple of places to look for....
1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
3)Create a "evdataserver_debug.txt" in user's private publication folder on server side to populate very detail level logging and check the log on client side EVDRE_LOG.txt for further peek into where things are getting messed up.
if evdataserver_debug.txt does not get populated on BPC 5.x...it is an issue with IIS authetication on Application server.
4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
BPC\Logging for further details ..
Hope this helps..
Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

SAML v2 plugin: Error when running saml2setup

I try to install the SAML v2 plugin and get the following error when running the saml2setup command:
C:\SSO\samlv2-2007Q2-windows>saml2setup install -s saml2silent
Java home path = C:\PROGRA~1\Java\JDK15~1.0_1
Configuring SAML2 plugin ...
java.lang.Exception: errorCopyFiles
        at com.sun.identity.saml2.install.SAML2Util.copyFile(SAML2Util.java:195)
        at com.sun.identity.saml2.install.SAML2Util.backupFiles(SAML2Util.java:5
17)
        at com.sun.identity.saml2.install.SAML2Util.configureSAML2(SAML2Util.jav
a:342)
        at com.sun.identity.saml2.install.SAML2Setup.configure(SAML2Setup.java:2
06)
        at com.sun.identity.saml2.install.SAML2Setup.execute(SAML2Setup.java:123
        at com.sun.identity.saml2.install.SAML2Setup.main(SAML2Setup.java:71)I have installed the Java ES 5 Identity suite with default configuration on Windows 2003. The content of the amserver.war lies extracted in the staging directory. The saml2silent properties file looks like this:
STAGING_DIR=C:/SSO/fm/war_staging
ADMINPASSWD=XXXX
DEPLOY_SAMPLES=true
SYSTEM=
AM_INSTANCE=
AM_CONFIGURATION_DIR=C:/PROGRA~1/Sun/JavaES5/identity/config
AMADMIN_DIR=C:/PROGRA~1/Sun/JavaES5/identity/bin
LOAD_SCHEMA=true
DS_DIRMGRDN="cn=Directory Manager"
DS_DIRMGRPASSWD=XXXXDoes anybody have an idea what's wrong?

Unfortunately not. I figured out that the problem was caused by some missing libraries. The amserver.war of the package installation is not identical to the amserver.war archive of the the single war deployment, since the package deployment uses a shared folder for some of the libraries. After copying the libraries into the staging folder I ran into other issues. Therefore I decided to install Access Manager using the single war depolyment. I could then install the SAML v2 plugin without any problems.

Getting PRKS-1009 error when running DBCA &

Similar Messages

Maybe you are looking for