Get a connection error when running a BODS job

Hi All,
I have BODS system setup in my environment. There are quite some jobs that run everyday. The jobs have stopped running since the last days. The jobs arn't failing, but they do not run.
When I try to Execute a job, I get the error "Connection Refused: connection". When I Test the connection from BODS to CMS, it is working fine. Also, from the BODS/BO server I am able to connect/ping to the DataStore servers. My Datastores are SQL servers and ECC also.
I do not know what is the resolution for the issue.
Thanks,
Amrita

Hi Manoj,
We recognized the issue was at the OS level, in the "Data Services"-OS Service.
The BODS jobs are running fine now.
Thanks,
Amrita

Similar Messages

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

Getting a "Connection Error" when uploading

Im trying to post my training program on the web but getting a "Connection error". Seems only the video portion is not working but all the rest works. In one instance I posted to Weebly server and in a second case I posted to a folder on another server. The second one could not upload the XML files and Im wondering if that is the issue? Not sure about Weebly but it could be the same issue. Im wanting to post my training program to my personal web site. Does anyone know precisely how to do this to eliminate the connection error? Thanks

Hi Sandy,
Based on my research, the error always caused by the package runs with 64bitruntime.
To fix this issue, there are two scenarios:
If you execute the package in SQL Server Data Tool, we should change the Run64BitRuntime property of project that contains the package from True to False.
If you execute the package in SQL Agent Job, as Visakh and Pradyothana suggest, we should enable Use 32 bit runtime option under Execution options pane.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I get a "connection error" when trying to update/install Flash Player

I have a previous version of Flash player so I was trying to update it. The installation doesn't make it past 5% before saying "connection error". I have tried all the troubleshooting steps and even tried to uninstall it. When I try to download the uninstaller, I get a page on safari that says "safari cannot connect to server" (I also tried on firefox too, same problem). I have tried to locate it in my toolbar and applications to uninstall it from there with no luck, it has completely disappeared. Not in my trash, nowhere. Not sure what else to do. I am running on Mac OS X 10.7.5. When I have Adobe check to see if it is installed on my computer, it says that a previous version is installed, 16.0.0.

Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush

I am getting a framing error when running a VI via RS-232. Any thoughts?

I have a Keithley 2700 multi meter and am trying to get its IDN. I am getting error number 800, on the multimeter, back when running the VI

A framing error indicates that you don't have the same serial parameters set the same on the pc and on the instrument. Double check baud rate, parity, data bits, and flow control and make sure they match.

Why am I getting a "connection error" when trying to buy a paid app in the Mac App Store?

Okay, so I am currently running OS X Mountain Lion on a brand new Macbook Pro 15 inch (early 2013). I haven't had any problems so far. However, today I tried buying a $10 app in the app store, and when I put in my login credentials to validate the purchase, it showed a loading wheel for about five minutes, then showed in red text, "Connection Error," just below the login fields. I've researched this issue and found it to be a bug in Lion... but no solutions for Mountain Lion. Any ideas?
I tried doing the thing with the Keychain Access, but there were no blue pluses under "Certificates." I should also mention that my network connection is fine.
Thanks in advance fellow Apple dudes!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Getting PRKS-1009 error when running DBCA &

I'm trying to configure my first Oracle setup and it's requiring RAC to be in place.
When I run dbca & to configure the clustered database I get the PRKS error on both nodes, which then does not allow me to find my previously created ASM disks.
I have searched through the forums and internet for solutions but everything I found had to do with people getting this error post installation on a reboot.
Any ideas or places to begin looking?

Hi,
Were prerequisites applied sucesfully ? (OS patches, kernel settings,etc)
J

Get Internal Server Error when run the site

the url of my site is :
http://webdb.us.colorcon.com:7777/pls/portal30
everything ran fine till yesterday. but i also created 2 new sites as follows :-
http://webdb.us.colorcon.com:7777/pls/prtltest http://webdb.us.colorcon.com:7777/pls/prtltran
the prtltest is a test site and
the prtltran is a training site
but when i log in to my original site today, i get Internal Server Error. i did the troubleshooting and the following URL failed :-
http://webdb.us.colorcon.com:7777/servlet/IsItWorking
the troubleshooting guide on OTN says the following maybe the cause :-
The Apache JServ is not working correctly. Most "internal server errors" are related to Apache Jservs failure to start.(usually due to a port conflict).
Please look at the following log files for details: Apache Listener log files in IAS_HOME/Apache/Apache/logs, and the
Apache JServ log files in IAS_HOME/Apache/Jserv/logs.
is it because the newsites share the same port number 7777 as the existing ones ?
i looked at the log files and all it says is, some files not found.
is there anything else i seem to be missing ?
any help wouldbe appreciated.
thanx
null

Are you using multiple listeners or just one? If you have multiple listeners, then you need to update the jserv.properties file for each with a distinct port. The default is 8007.
If you are using one listener (which you can do) then the apache/jserv configuration is is wrong. What are the files that it says are missing?

Distribute System - Error when run tcode DB13 - Job Log - Cancel

i have two server and I installed SAP ERP 6.0 (Application ABAP) on two server base on Distribute System model
Server A : I installed Global Host Preparation and Central Instance
Server B : I installed Database Instance
On server A, I exported /sapmnt, /usr/sap
On server B, I mounted /samnt, /usr/sap from Server A
Process Installation -> OK
and finally , I logged in SAP through server A -> OK
But when i run tcode DB13 to run Action Pad : Cleanup Logs, Check and Update Optimize Statistic ....etc -> Cancel
-> with error in tab Job Log below
20.01.2010     14:37:07     Job started
20.01.2010     14:37:07     Step 001 started (program RSDBAJOB, variant &0000000000041, user ID BASIS)
20.01.2010     14:37:07     No application server found on database host - rsh/gateway will be used
20.01.2010     14:37:07     Execute logical command BRCONNECT On host sapree2
20.01.2010     14:37:07     Parameters: -u / -jid CLNUP20100120143706 -c -f cleanup
20.01.2010     14:37:29     SXPG_STEP_XPG_START: is_local_host: rc = 403
20.01.2010     14:37:29     SXPG_STEP_XPG_START: host = sapree2
20.01.2010     14:37:29     SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
20.01.2010     14:37:29     SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
20.01.2010     14:37:29     SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
20.01.2010     14:37:29     SXPG_COMMAND_EXECUTE(LONG)
20.01.2010     14:37:29     <timestamp> = 20100120143729
20.01.2010     14:37:29     COMMANDNAME = BRCONNECT
20.01.2010     14:37:29     ADDITIONAL_PARAMETERS = -u / -jid CLNUP20100120143706 -c -f cleanup
20.01.2010     14:37:29     LONG_PARAMS
20.01.2010     14:37:29     OPERATINGSYSTEM = ANYOS
20.01.2010     14:37:29     TARGETSYSTEM = sapree2
20.01.2010     14:37:29     DESTINATION
20.01.2010     14:37:29     SY-SUBRC = 1003
20.01.2010     14:37:29     SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
20.01.2010     14:37:29     Job cancelled after system exception ERROR_MESSAGE
and then , I checked tcode SM59 -> TCP/IP Connection -> SAPXPG_DBDEST_SAPREE2 -> Test Connection -> not OK with error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapree1.reecorp.com / sapgw00
Error Details     DETAIL: no connect of TP sapxpg from host sapree2.reecorp.com after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 22
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 20 14:42:39 2010
Error Details     VERSION: 2
thanks for your advice

Hi,
For installation you can refer the standalone gateway installation guide available under http://service.sap.com/instguides
For operating the standalone gateway you can use the below link
http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/content.htm
Cheers.....,
Raghu

Shell Script gives error when run through cron job.

Hi,
The following shell script runs without any problem when executed manulally.
USED=$(df -h /arch | tail -1 | awk '{print $5}' | cut -d '%' -f 1)
if [ ${USED} -gt 90 ]
then
find /arch/AUBUAT/ -type f -mtime +0 | xargs rm
find /arch/AUBMIG/ -type f -mtime +0 | xargs rm
fi
But the same gives below error when called from a cron job:
/backup/arch_test.sh: syntax error at line 1: `USED=$' unexpected
We are running following version:
bash-3.00$ uname -a
SunOS uaeaubdbdr01.aub.af 5.10 Generic_141444-09 sun4u sparc SUNW,SPARC-Enterprise
Kindly assist.
Thanks
Edited by: user13362786 on Apr 20, 2011 4:36 AM

Hi,
When I used #!/usr/bin/sh now even the manul execution of the script fails with the same err:
bash-3.00$ ./arch_test.sh
./arch_test.sh: syntax error at line 2: `USED=$' unexpected
And when I used #!/usr/bin/ksh the manual execution runs fine but again when the script is run from cronjob it now give dirrect err:
/backup/arch_test.sh[2]: df: not found
/backup/arch_test.sh[2]: tail: not found
/backup/arch_test.sh[2]: cut: not found
/backup/arch_test.sh[2]: awk: not found
/backup/arch_test.sh[3]: test: argument expected

Database connection error when running report from web application

Hi all,
When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
Rep-501 : Unable to connect to the specified database.
I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
GPGWL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = GPGWL)
)

Please ask this question in Jdeveloper forum.

Connection error when running sql*plus from within a Makefile

As part of our build process the commands to install/update our database schema are executed from a Makefile (along with all the other build/test commands). We've been running our build under several system configurations, but have hit a hitch with one specific one. So far this has worked with Windows XP (cygwin) against a Express Edition DB and Red Hat ES 5 against Oracle 11g.
I am now trying to get the build running on a Ubuntu 8.04 workstation with the Oracle Express Edition installed. From the command line I can execute a simple command line such:
echo "SELECT 5 as foo from dual"|sqlplus user/password
Now if I put the same command in a Makefile, I receive the following error message:
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
Linux Error: 22: Invalid argument
Additional information: 1
Additional information: 32769
This error seems to pop up a lot when a client is not properly configured (atleast the googling I've done has said as much), but my client is clearly working as I can connect outside of the Makefile. Is there possible some info that gets lost when make executes the process? Any ideas of what I could do to fix this?

see 115753.1 note on metalink , it clearly explains why you are encountering this .

Getting time out error when running the assigned verification in DRM 9.3.2.

Hi,
I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
Please suggest a solution for this issue.
regards,
sathiya

Please suggest me the solution.
regards,
sathiya

Why do I keep getting a connection error when trying to connect to SQL?

Environment:
LiveCycle ES2
Windows Server 2008
JBOSS
Oracle Application DB
When trying to connect to SQL, I get this error message in the log.
Exception: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.))
I have these two files located in \\jboss\server\lc_oracle_cl\lib
sqljdbc.jar
sqljdbc4.jar
I was told all I needed to do was drop these two files in the directory above and restart JBOSS. Is there something I'm missing?
Jesse

Hi Jesse,
The driver you are using is for SQLServer Database. Since you are using Oracle as your database, you need an oracle driver.Please copy ojdbc6.jar from the [installDir]/lib/db/oracle/ directory and try again.
Thanks,
Ruchi

Get a connection error when running a BODS job

Similar Messages

Maybe you are looking for