Getting processing log for our custom output triggering FM?

Hello,
VA02 > Extras>Header>Output>Edit --- Triggering an custom IDOC
Stadnard SAP output programs shows IDOC number on output processing log. But, our custom programs/FMs the one we use to trigger on order IDOC, don't show the processing log. How to get this processing log for custom FMs just like standard SAP?
Thank you

Hello
I am sending my custom IDOC by using FM  'MASTER_IDOC_DISTRIBUTE', if it went well (sending successfully - status is '03') in next step am using PERFORM FILL_NAST_PROTOCOL(ROIKCALE) routine.
But, when i checked the PROCESSING LOG of the associated green latest item in VA02/03>Extras>OP>Header>Edit....am getting a message that "No processing log exists"
How to get/see my IDOC #?
when i saw the F1, it says, "System logging has been de-activated for the selected output type (use settings in Customizing for current application for the selected output type)"
When i checked the settings in NACE (and then clicking lense), they are fine.
Am i seeing correctly to get/know the generated IDOC #?
Thank you

Similar Messages

  • Need help to get processing log for mass invoice output

    Hi Experts,
    I have one requirement,
    My customer will send invoices to their customers in bulk on monthly basis. The customers will receive the invoices through emails, fax or printout. Now the issue is when they send the output to the customers there might be some failures in delivery because of some reason to some customers. I want to capture all the invoices, customers, medium and error text and want to display as a report.
    We can see the processing log for a single invoice in VBFA transaction but I want to display one consolidated list where the user can see all the error log records at one place.
    I know some tables where we can see some data in NAST, NACH but I would be greatful to you if you provide some more information about this.
    Please provide whatever info you have.
    Regards,
    Dileep.

    Hi Study abap,
    go through this code and use the HTEXT fm accordingly to ur requirement. This is just a sample kind of thing which will help u to write s-kunnr in htext.
    SELECT-OPTIONS: S_MATNR FOR PBIM-MATNR,
    S_WERKS FOR PBIM-WERKS.
    DATA: BEGIN OF HTEXT.
    INCLUDE STRUCTURE THEAD.
    DATA: END OF HTEXT.
    DATA: BEGIN OF LTEXT OCCURS 50.
    INCLUDE STRUCTURE TLINE.
    DATA: END OF LTEXT.
    DATA: BEGIN OF DTEXT OCCURS 50.
    DATA: MATNR LIKE PBIM-MATNR.
    INCLUDE STRUCTURE TLINE.
    DATA: END OF DTEXT.
    DATA: TNAME LIKE THEAD-TDNAME.
    SELECT * FROM PBIM WHERE WERKS IN S_WERKS.
    MOVE PBIM-BDZEI TO TNAME.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT = SY-MANDT
    ID = 'PB'
    LANGUAGE = 'E'
    NAME = TNAME
    OBJECT = 'PBPT'
    ARCHIVE_HANDLE = 0
    IMPORTING
    HEADER = HTEXT
    TABLES
    LINES = LTEXT
    EXCEPTIONS
    ID = 1
    LANGUAGE = 2
    NAME = 3
    NOT_FOUND = 4
    OBJECT = 5
    REFERENCE_CHECK = 6
    WRONG_ACCESS_TO_ARCHIVE = 7
    OTHERS = 8.
    LOOP AT LTEXT.
    IF LTEXT-TDLINE NE ''.
    MOVE LTEXT-TDLINE TO DTEXT-TDLINE.
    MOVE PBIM-MATNR TO DTEXT-MATNR.
    APPEND DTEXT.
    ENDIF.
    ENDLOOP.
    ENDSELECT.
    LOOP AT DTEXT.
    WRITE:/ DTEXT-MATNR, DTEXT-TDLINE.
    ENDLOOP.
    Kindly reward fi found helpful.
    cheers,
    Hema.

  • No processing log generated from the output type for the IDOC

    Dear experts,
    the output type which is triggered with a transmission medium Special Function has not generated any IDOC.
    The question is what is the role of a Special function and EDI transmission.
    In some cases the system has generated an IDOC and some cases not. The output is pickedup automatically, but
    does not always trigger an IDOC, Thats is the issue I am facing.
    Therefore in cases where there was no IDOC created there is no processing log generated.
    KIndly help.

    The status is green, and when I try to show the IDOC it  doesnt show and no processing log.
    The same output is processed for a delivery and it creates a IDOC but sometimes it doesnt.

  • No processing log for outbound delivery for output type

    Dear Gurus,
    I want to see processing log for output type for outbound delivery .
    But when i click processing log push button for output type for outbound  delivey  , one error is comming as 'NO PROCESSING LOG FOR OUTPUT TYPE'.
    Could you please let me the reason ?
    Edited by: susheelkodam on Sep 9, 2010 10:33 AM

    Hi,
    What transaction are you running when you press the [Output log] button?  If you're in the create transaction, then I think the output log should be available but if you subsequently go in to VL02N and press the Log button, the I don't think the log is available.
    Regards,   Andy

  • You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

    You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

    Forced me to do a little research.
    DBCC SQLPERF(logspace)
    See also
    http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • Processing log for customer_H fields

    Dear all,
    We are cusomizing the Processing Log for Service Request.
    In the customizing, we can add some fields coming from the CUSTOMER_H table.
    However, after adding those fields , they are not in the processing log of the transaction type in CRM7. It seems that it does not take into account the customizing. When we modify the created fields, they are not shown in the processing log history.
    Would anyone had already meet this problem?
    Thank you,
    Regards,
    Anaïs Jaussaud

    Hi,
    Just closing the question as I have my answer. when developpers create the fields in AET, they have a possibility to track it in the history tab.
    regards,
    Anaïs

  • Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1

    Hi,
    while uploading new rpd getting error message in enterpriise manger
    Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1,chekced in the dignostic log found above mentioned error
    what can be cause of the probelm
    thanks

    Hi,
    1.Try using the sample rpd of it works, then the problem with the new rpd.
    2. Restart the service once then upload the new rpd.
    Regards,
    VG

  • How we can inactive the credit account for our customer

    Hi Gurus,
    Can you please let me know, Where we can deactivate the credit account for our customer?
    Thanks in advance
    Mayank Tyagi

    Hi Mayank,
            As per my Understanding.
    here you are trying to enter the payer code different as sold to party.
    if its so,
    both ur customer-sold to & Payer has credit master records ( check in FD32).
    both might have maintained different credit limits.
    so when you enter the payer different as customer, based on credit management configuration - systems check for the Payer as well as Sold to's credit records, if both r different then system prompts this error message.
    As i know, it wont allow you to proceed further.
    this is the reason in many cases your sold to & payer will be same.there could be chance, that your ship to will be different.
    my query is: - why you are trying to enter 2 different ( sold to & payer) partners?
    any doubts plz let me know.
    hope it clears,

  • Customizing root folder for our custom and standard reports

    Hi Experts,
    We are planning to have customizing root folder for our custom and standard reports,
    I have couple of questions to do this customization.
    1)     How do we setup root folder as default instead XA or SSA for all the users?
    2)     What are the implications on Spend adviser reports, we will not customize spend adviser, planning to use standard SPD?
    3)     Do we have any developments required or setup at visual Admin level?
    Someone can guide me what would be the pros and cons along with above concerns? Your reply will be highly appreciated.
    Regards,
    Mahesh

    Madhav,
    Do i have further inputs on this?
    Regards,
    Mahesh

  • Need to request S-User for our customer

    Dear All,
    Could anybody please give me the link that we could request S_User for our customer? Thanks
    Regards
    Yuka

    Find the link by myself.

  • Write processing log for custom output type

    Hi,
      I have defined a new output type at delivery header level . This is processed using a special function and on processing moves  stock from unrestricted to a order special stock.
    I need to update the "processing log" of the output with the material document number. Can any one please let me know how I can write to this "processing log" of the output?
    Thanks in advance.
    Regards.
    Hari.

    Use function NAST_PROTOCOL_UPDATE:
    * No orders found
        wa_msgv_1 = nast-objky+0(10).
        CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
          EXPORTING
            msg_arbgb = c_msgtype
            msg_nr    = 30
            msg_ty    = 'S'
            msg_v1    = 'No orders found for delivery'
            msg_v2    = wa_msgv_1
          EXCEPTIONS
            OTHERS    = 1.

  • Updating processing log for sales order header output

    I want to prevent a custom sales order confirmation from printing when the order has not been approved.  When the user requests the form to print in the background, I want to update the processing log to have a red light and a message indicating the order has not been approved, so it cannot be printed.  When I pass an error message to the protocol processing, the update is terminated and my changes to the sales order are lost.  Is there a way to update the processing log, show the red light, and not get the hard error? 
    Thank you in advance. 
    Jay

    Setting the return code after the protocol update did the trick.

  • How to get a refund for my customer?

    A customer named Sharon Walters accidentally purchased my 364 Pro Presets Bundle twice.  If you need her email address I can provide that, I am just reluctant to post it publicly.  Can the Adobe staff that reads this message please refund one of her orders?  She is being very very nice about this and was even willing to write it off, but it is my personal belief that she should get a refund for the accidental second purchase.
    Thank you,
    Rachael Towne

    Yes we can refund the customer, ideally if you or her can email us at [email protected]<mailto:[email protected]> we can process the refund.
    Doing it via forums delays things so for customer issues with Add-Ons please use [email protected]<mailto:[email protected]>.
    Thanks and have a lovely weekend.
    Jonathan

  • How to get change log for z-fields in VBAk(Sales order)

    Hi All,
    Please help me in this.
    My requirement is get the change log for z-fields in sales order.
    In the sales order header level we have one tab Additioanl data.
    In this we have z-fields, if we change any of the field value, it is accepting the same and updating in data base as well.
    But it is not appearing in change log<. I.e. Environment->changes.
    How to get the change log for the z-fields.
    In data element level enable the check box of change document.
    Please help me in this.
    Thanks in advance
    Jaya,G

    Hi Jaya,
    For this you need to do some coding. Here is a link which tells you, step by step procedure how to activate Change log for the Z tables.
    THe Object that you need to use for Sales Document   is VERKBELEG
    [https://wiki.sdn.sap.com/wiki/display/ABAP/Maintaining%20Change%20Log%20for%20Database%20Tables]
    Hope this helps..
    This is Primarily a Technical Consultant Job. Take his help before you make any changes.
    Thnks
    Srini

  • BAPI function module to get process orders for certain material

    Dear experts ,
    kindly , I need my vb application to get all CRD , but not DLV Process orders for Material X.
    Into SAP , I use the COIO , then set material to X , then display flag CRTD included , and Exclude DLV.
    Question now , What is the function module that does this. what is the table name , and how to set search parameters.
    my code will be like this
    theFunc = functionCtrl.Add("BAPI_PO_GETDETAIL") ' get po data
       theFunc.exports("purchaseorder") = t.Text
                 returnFunc = theFunc.call
            returnParam = theFunc.imports("po_header")
            retTab = theFunc.tables("po_items")
            For Each rr In retTab.Rows
                tt1.Text &= (rr("MATERIAL")) & vbTab
            next
    Thanks
    Waleed

    Hi,
    Check if the below helps:
    1.  BAPI_SALESORDER_GETLIST for VA05
    2. BAPI_QUOTATION_GETDETAILBOS for VA25.
    Regards,
    Vivek

Maybe you are looking for