Getting SPICE netlist error in schematic...: Invalid subckt definition '21' and '33' on user added component

Question

In some design work I was doing I needed to use a vacuum tube type that is not available in Multisim.
After some research on how to add a component I tracked down a spice model of this part and used the component wizard to add it.
After adding it and putting it in a circuit it will simulate fine for a few moments then errors will occur and it will not allow me to restart the simulation there after.
Here is the spice model I'm using, and I've attached a screen cap of the error messages. Any help fixing the errors would be appreciated.
* Filename: SV6AS7.inc V1 25/8/97
* Simulator: PSpice
* Device type: Power triode
* Device model: Svetlana 6AS7
* Author: Duncan Munro
* Date: 25/8/97
* Copyright: (C)1997-2000 Duncan Amplification
* The following parameters are not modelled:
* (1) Heater is not modelled.
* (2) Grid current is not modelled.
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
* This model is provided for educational and non-profit use.
* Email queries to [email protected]
* Pins A Anode
* G Grid
* K Cathode
.SUBCKT 6AS7 A G K
* Calculate reduction in mu at large negative
* grid voltages
Emu mu 0 VALUE={PWRS(V(G,K),0.88)}
* Emission reduction due to low Va
Eel el 0 VALUE={ATAN(LIMIT(V(A,K),0,1E6)/10)}
* Calculate change in shape with reducing grid voltage
Eshape shape 0 VALUE={(220+V(G,K))/220}
Egs gs 0 VALUE={LIMIT(V(A,K)+V(mu)*2.8,0,1E6)}
Egs2 gs2 0 VALUE={PWRS(V(gs)*V(shape),1.5)*410E-6}
Ecath cc 0 VALUE={V(gs2)*V(el)}
* Calculate anode current
Ga A K VALUE={V(cc)}
* Capacitances
Cgk G K 8p
Cga A G 11p
Cak A K 3p
.ENDS

Answer 1

okay I guess the screen cap won't work. Here is the copy pasted error code I'm getting
------ Checking SPICE netlist for Reverse Futterman OTL 1.2 - Saturday, July 20, 2013, 2:36:07 PM ------
SPICE Netlist Error in schematic RefDes 'u2', element 'xu2_b': Invalid subckt definition name '33'
SPICE Netlist Error in schematic RefDes 'u2', element '': Due to errors, the subckt instance 'xu2_b' has been omitted from the simulation
SPICE Netlist Error in schematic RefDes 'u2', element 'xu2_a': Invalid subckt definition name '21'
SPICE Netlist Error in schematic RefDes 'u2', element '': Due to errors, the subckt instance 'xu2_a' has been omitted from the simulation
======= SPICE Netlist check completed, 4 error(s), 0 warning(s) =======
Error message from simulation: doAnalyses: Timestep too small
Error message from simulation: tran simulation(s) canceled