GETTING UPSET

I cant get a single jar to work on my computer!! They ALL get the error: Could not find the main class, the manifest file looks like this:
Manifest-Version: 1.0
Created-By: 1.4.0_01 (Sun Microsystems Inc.)
Main-Class: hello

Don't get upset :). After the last line of the manifest (in this case- "Main-Class: hello"), you need to hit enter again. So under the manifest file is an empty line at the bottom. It will work then. Also keep in mind the class is case-sensitive. So if it's actually "Hello.class" you need to put "Hello" in the manifest.

Similar Messages

Hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???

hey guys getting upset about how i tunes is debiting $1 from my account every month is it happening yo anybody else..i didnt buy anything from the stores...whats wrong.. they just cant debit frm my acc???

Have the same problem here... don't know what to do...

Reet guys and girls, i'm getting upset about this now.

I know there is probably a thousand topics like this already, but i'm in a fair rush to get this sorted =].
My problem is, i've broken my main "gud" pc, my iPod shuffle, not the newest one, the tiny belt clasping one, was synced to that.
As that was broken, i decided to download iTunes on my sisters pc and try that out, i need new music after all. Well, it was all fine, until i get to syncing my iPod with the new pc, it tries and tries, but fails, i can't put any songs on because of this. Any ideas anyone, this is killing me!
Thanks, Haarry!

You might get more help if you ask in the iPod Shuffle forum. No guarantees, but it's worth a try. It'll help when you repost if you include the version of Windows running on your sister's computer, what version of iTunes it is, and what exactly the symptoms are including error messages if any. You haven't given anyone here much to go on.
Good luck.

Starting to get upset with new FX5600

OK - I bought a FX5600 yesterday and things seemed OK with a bit of crashing which I figured were teething problems, maybe with drivers (apart from the software thing I've whinged about on another thread). Then I found out that there were these new Detonator drivers out (44.03) so I got them. Then the brown stuff really hit the spinning thing. I can't play anything for more than 30 minutes without a crash now. 'Daikatana' now plays worse than it did with my old GeForce2, even though when I first installed the new card I was bossing UT2003 with full effects. I can't even revert to the old drivers because the install program doesn't recognise my GeForceFX as an NVIDIA chip!!
I figure it might be to do with IRQ type scary stuff. This is what my device manager shows (repeated lines e.g. IRQ 5 are just as they are shown on screen):
00 System Timer
01 Standard 101/102 keyboard
02 Programmable interrupt controller
03 Communications port (COM2)
04 Communications port (COM1)
05 Conexant PCI modem enumerator
05 VIA TECH 3038 PCI to USB Universal Host Controller
05 ACPI IRQ Holder for PCI IRQ Steering
05 ACPI IRQ Holder for PCI IRQ Steering
06 Standard floppy disk controller
07 EPSON Printer Port (LPT1)
08 System CMOS/real time clock
09 VIA TECH 3038 PCI to USB Universal Host Controller
09 VIA TECH 3038 PCI to USB Universal Host Controller
09 ACPI IRQ Holder for PCI IRQ Steering
09 SCI IRQ Used by ACPI Bus
10 VIA USB 2.0 Enhanced Host Controller
10 CMI8738/C3DX PCI Audio device [my onboard sound]
10 ACPI IRQ Holder for PCI IRQ Steering
11 VIA TECH 3038 PCI to USB Universal Host Controller
11 NVIDIA GeForce FX 5600
12 PS/2 Compatible Mouse
13 Numeric data processor
14 VIA Bus Master PCI IDE controller
14 Primary IDE controller (dual fifo)
15 VIA Bus Master PCI IDE controller
15 Secondary IDE controller (dual fifo)
Whew. That took a long time to type. Now, I don't understand IRQ stuff beyond what an interrupt is. I certainly don't know which things are safe to be on the same IRQ slot. But it seems to me that all those repeats can't be right - can they? Mainly though, the graphics card is sharing an IRQ with two other things - is this bad?
I would really appreciate it if someone could help me out with this. Is there a problem with my IRQs and if so, what on earth do I do to fix it?
Many, many thanks in advance.
Ross
AMD XP 2100+
ASUS A7V333
512MB PC2700
MSI FX5600 VTDR128
PSU - 400W (brand new)

Ross,
APIC is enabled in the BIOS. You do not want to enable since it would mean you would need to install your OS again in order for it to function correctly. On Motherboards with APIC the default is usually enabled. Seeing you do not have it enabled and I am guessing you did not disable it in your BIOS. this makes we wonder if you are running Win98SE or WinME since they do not use APIC? (The only thing you missed listing above in your first post.)
Here is a little more info direct from Microsoft on APIC:
Key Benefits of the I/O APIC
Take Care,
Richard
P.S. My wife is from Weybridge in Surrey, so you might find me at your door one day, waiting to head to your Local for a pint.

Hello I have upgraded my iPad again. It seems that something gets upset each time. This time my mailbox has become unstable. It does not receive or send mail. I know my wifi is fine because my laptop is fine. I have switched off the iPad again and again.

Not sure you got my earlier message so I am posing my question again.
Having upgraded my iPad to the more recent OSsomething, my mailbox no longer receives or sends emails.
My wifi is fine, checked with my laptop which works fine. I have switched off the iPad many times but the problem remains. Can anyone help?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
That's not the same as turning it off or on.
Another things to try is to reset your settings. Use the Settings app for this.
Settings > General > Reset > Reset All Settings
You will not lose data but you will have to enter all passwords again.
If the problem persists after the reset check your email accounts on the iPad. You could delete them and add them back. This is also done in the Settings app.
Settings > Mail, Contacts, Calendar

I am VERY upset that I have to pay $280.00 to get my broken touchscreen replaced!

I am VERY upset that I have to pay $280.00 to have my touchscreen replaced.

It's OK to be upset.
Everyone gets upset from time to time.
Don't be too hard on yourself.

14 weeks to get a phone line installed - £10 compe...

I moved house on 28/07 and after a huge amount of problems with Orange and after managing to cancel my account with them I ordered BT Broadband and Evening & Weekend Calls on 07/08/12.
I get 3 emails confirming my order, thanking me for choosing paperless billing etc.
My initial engineer appointment was on 14/09/12 which is 5 weeks and a long time. To quote BT: “It usually takes 15 working days from when you order. It can take longer but this is very rare.” (http://bt.custhelp.com/app/answers/detail/a_id/8317/~/how-long-will-it-take-to-install-a-new-line%3F)
I get a text and an email on 12/07 to remind me of my appointment between 1pm and 6pm. So far so good.
The router gets delivered at 12.30am. This is promising.
The engineer comes at 13.30pm, installs the BT Open Reach box in my flat and then asks me if I can open the electronic gate next door as he needs access to my neighbour’s pathway to activate the distribution point. I tell him I cannot as it’s not my building. We try the trades button on the door system. It doesn’t work. We try pressing random house numbers on the door system (there’s no flat numbers on the building) to see if someone’s home. Nothing works. I phone my landlord who tells me this is a council building. No one is coming in and out of the building/gate. After about 30 minutes of trying and waiting I tell him just to use his ladder and climb over the gate (it’s about 6 foot) and activate the distribution point. I’ll take the blame if someone complains. It shouldn’t be a problem as I live next door, I’ve got a BT Open Reach engineer with me and we have a perfectly valid reason to do it. He tells me he can’t do that because of health and safety riles and trespassing laws. Fair enough.
The engineer leaves but before he does he tells me that when I’ve got access to the pathway BT would be able to send an engineer within 24 hours to activate the distribution point. He also tells me there is no need for me to be there the next time as all the work inside is completed and the only thing that needs to happen is for someone to activate the distribution point which is located on a wall on my neighbours building accessible from the pathway. He points it out to me and there is indeed a black box on the wall which can be reached using a ladder in the pathway.
I phone BT to see if anyone can find out how to get access to the pathway as I assume that if BT has installed a distribution point there they must have a way for them to get access to it. Especially as the engineer told me there are 3 lines in my building so this must have happened before. I was wrong. I have to argue with the customer service person with a very poor command of the English language for 30 minutes. He doesn’t know what “the council” is and doesn’t understand whatsoever why I –and I quote- “Can’t just ask the neighbour to let the engineer in when the next appointment has been made”. I try to explain to him there is an electronic metal gate with a call system and I am unable to call anyone as there are no flat numbers on the outside of the building and asked if he was suggesting that I wait all evening after work until someone comes out and that even then, surely I can’t ask my neighbour to stay home to let a BT engineer onto his pathway because I am trying to get a phone line installed. He then presented me with another option: “We can install a new line from the road but this is chargeable by £350”. After 30 minutes of this and asking to speak to a manager several times –which was refused- I had enough and hung up.
Determined to get the problem resolved I rang again and got someone else on the phone. She was quite sympathetic and advised me to phone the council and see if they can help. She confirmed that I didn’t need to be there for the next appointment if someone could give the engineer access to the distribution point as all the work apart from the distribution point activation was complete. By this time it was 4pm on a Friday and she promised to call back at 4pm on Monday.
I called the council right away but they said the caretakers had gone home as it was late on a Friday and advised me to ring back on Monday.
I get a text from BT: sorry we missed you appointment etc.
BT calls me on Monday morning 10.30am asking if I’ve sorted it. I tell the person I was expecting a call from them at 4pm and therefore I hadn’t rang the council yet. He promises to ring me back on Wednesday at 10.30am.
I call the council later that day; they’re not very helpful and advise me to call them again on Tuesday.
On Tuesday they log the call and lo and behold. Wednesday at 8.30am, the caretaker calls me, gives me his mobile number, tells me the trades button on the call system will work before 9.30am and they can give them access remotely. If they’re coming after 9.30am, the engineer needs to ring him an hour in advance and he’ll come to open the gate. We’re getting somewhere.
I don’t get a call on Wednesday 10.30am.
I call them myself that afternoon and explain the above. The guy says he’s written it all down, everything will get sorted and I’ll get a text with the new time and date.
Someone with a very poor command of the English language phones me on Thursday. I asked why she is ringing me. She says it’s to makes an engineer appointment. I tell her she doesn’t need to ring me as I don’t need to be in the property and they should all the information needed as I called them the day before. She doesn’t have a clue what I’m on about. I tell her to read out what she has on her screen under the notes as I now don’t trust that the person the day before has written it down properly. She once again doesn’t have a clue what I’m on about. I ask to speak to her manager. She says he’ll call me back. 5 minutes later he does. His English is excellent and he seems to have found the notes and knows exactly what’s going on. This is encouraging. He says the first appointment they have is 03/10 (it is now 20/09) but he’ll make sure they get it earlier and he’ll ring me back. The first person that hardly speaks English calls back. She says the appointment will be on 03/10 between 8am and 1pm. I tell her that her manager told me he was going to make sure it was going to be earlier and ask her why he lied to me. She doesn’t understand what I’m saying. I try to explain to her that trades button on the call system will work before 9.30am and they can give them access remotely but if they’re coming after 9.30am, the engineer needs to ring him an hour in advance and he’ll come to open the gate. She doesn’t understand what I’m saying. I ask her to get her manager to ring me back as he speaks English. She says he’ll call within 15 minutes. I get a text 5 minutes later confirming my appointment for 03/10 between 8am and 1pm.
On 02/10 I phone the caretaker in the morning to let him know they’re coming on 03/10 between 8am and 1pm. I also called BT once again to check everything was clear, confirming they have the correct mobile number of the caretaker etc. They say they have all the information needed and promise that the work will be done.
I phone on the afternoon of the 3rd to check the work had been done and I am told that it hasn’t as the engineer needs access to a flat roof and the caretaker can’t provide him with that. I explain that the original engineer had been on the flat roof already and told me they only needed to get through the gate to activate the distribution point so I don’t understand why they now need to get back on the roof. The roof can be accessed with a ladder (which they all standard have with them) from the pavement anyway so why do I need to be there? They tell me that the engineer has tried to call me but my phone was switched off. I am 100% sure that my phone has been on all day and I haven’t received any missed calls. Also, after all of the above, I wouldn’t switch my phone off on the crucial day. The engineer is lying. After being on the line for 15 minutes (as it takes at least 5 minutes to go through the automated menu every single time you call them and it literally takes a minute for the information to come up on their screen every time they need to access a file) that I don’t have time to discuss this right now as I have an important teleconference with an overseas client and ask for someone to call me back that evening to discuss this as I am busy at work all day.
I receive a text 10 minutes later saying the next engineer appointment is 12/11 between 1pm and 6pm.
This is 14 (!!!) weeks after ordering the service. I phone back when I have a short break at work to discuss this and request a call back. Someone calls me back 5 minutes later and asked for my account information which I don’t have handy so I ask to hold on while I’m looking it up. She hangs up on me.
I stay late at work to write an email on the email form on the website with a watered down version of all of the above and I get a confirmation email that it’s arrived.
I get another text that evening at 8.40pm as well as an email saying -once again- that the next engineer appointment is 12/11 between 1pm and 6pm.
Someone calls me at 8.50pm saying that the next engineer appointment is 12/11. I tell him I know this as they’ve sent me 2 texts and an email already and that this date is unacceptable and ask to speak to his manager. He tells me I need to call the Order Management Department. I ask him what the number is. You’ve guessed it: 0800 0800 150.
Someone called Chris XXXXX calls me the morning after to discuss the email I’ve written the day before. He gives me the usual “Open Reach controls the engineers” story and tells me the appointment will not be earlier than 12/11. I tell him this is unacceptable and if the appointment can’t be moved forward I want some compensation for all the expense and inconvenience caused. He tells me that since I haven’t been billed yet I’m not eligible for any compensation but as a gesture of good will he will give me £10 which I’m normally not eligible for as this is only given to people whose engineer didn’t come on time. I try to explain that if the engineer would have called me as he said he’s done (and not lied like he’s done) I could have explained where the distribution point was and I probably even would have rushed home from work to finally get it sorted. We argue a bit about compensation in which he tells me he’s already doing me a favour by giving me £10. I stop the argument to discuss more practical issues and ask him if I now need to be home on 12/11. He says I do. I now need to take another day off work it seems. I ask him if the caretaker needs to be there as well. He says he does. I ask him if I should invite anyone else and provide tea and biscuits for everyone. I don’t think he gets the joke. We argue a bit more about compensation, we get nowhere. I’m now getting upset. He says he’ll call me back at 1.30pm.
He does and immediately I ask him for his direct phone number. He says he doesn’t have one. I ask him for his email address. He says he doesn’t have one. I ask how to get in touch with him. He says through the 0800 call centre or the form on the website. Now the line gets really bad and gets disconnected. There is nothing wrong with my mobile or signal, I have 5 bars and 3G showing but I can’t hear him and the line gets disconnected. This happens 2 more times. I get him back on the phone and I ask him to call me back on my work landline. He does and a number shows up on the phone (not the 0800 one that showed up when he called my mobile). I immediately write it down and tell him he just lied to me about not having a direct line. He says it’s a desk used by many people. I tell him that if I ring that number and he’s around there’s chance I could get to speak to him surely. He says it’s only used for outgoing calls. I haven’t tried to ring it and can’t be bothered to be honest. I stop this argument and bring the conversation back to compensation. I ask if he can at least give me a few extra months free or upgrade my account for free for a few months maybe by throwing in some telly or something. He says he can’t do that and they can review compensation once the line has been installed. I tell him that’s not good enough and that this whole story is going online and hang up.
Worst customer service I’ve ever experienced and it seems that I’m stuck with it because I’ve already got an appointment and cancelling and going with another provider will result in an even longer wait.
I’ve been offered £10 compensation for taking 2 days of work, hours on the phone, massive mobile phone bills, a lot of stress and 14 weeks without a landline or internet. Truly unbelievable.

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Brought my phone to Apple to get my screen replaced and now it won't turn on!! HELP

I brought my phone to Apple yesterday with my friend, and the employee helping me told me that there was a chance that the screen wouldn't be able to get fixed. When I went to go pick it up they told me that the machine had broken my phone and it was completely dead and that I would have to pay the full price for a new phone. They could tell I was getting upset (because now I have no phone) and he told me that the guy I gave my phone to told me that this might happen but HE DID NOT, my friend as a witness. Now I just have a phone that they broke completely (when it worked perfectly fine before, it just had a broken screen) and they refused to help me any further. Is there anything I can do to get my phone to work again? I don't understand why Apple wouldn't have to replace it when they broke it and they DID NOT tell me that there was a possibility that this could happen, I feel like they just said that afterwards so they wouldn't be responsible. PLEASE HELP.

Speak to the manager of that Apple store. There is nothing your fellow users on
this Internet forum can do. If the manager does not resolve the matter to your
satisfaction, you can use the link at the bottom right hand corner of every page in this forum
labelled 'Contact Us' to escalate the matter.

No opening of Aperture Library.aplibrary any more: HOW TO GET ACCESS?

It took me a long time till I decided to write this topic- I tried ALL the tips and hints described in this forum before.
This is the situation: APERTURE (1.5.2) does not open its library any more.
After having read about similar problems described in this forum, and after not beeing able to resolve the problem, I finally...
- backed up the whole machine
- reinstalled system (10.4.9) including all system updates (clean install, formatting HD)
- re-installed APERTURE from original DVD
- ran updater to arrive to APERTURE 1.5.2
- re-installed new Prokit File in System/Library/PrivateFrameworks/ProKit.framework/Versions/A/Prokit, got the file here: http://www.itsadirtyword.com/downloads/ProKit.zip, from thread
http://discussions.apple.com/thread.jspa?threadID=892893&tstart=30
- opened Aperture.
Till here all OK. Aperture opens and shows a vergin project, asking if I wish to import sample project.
Now I wish to get my photographs back from the backup file.
I give the command "rebuild from backup" (maybe in english it's different, I do have a german version of APERTURE installed, there it is called "Bibliothek wiederherstellen").
Now APERTURE starts (and shows me) the import process, counting down around 80.000 files (there are not THAT many photographs, I guess it includes all the preview-files). This takes quite a while. When finished, it says: "Import was OK, now you have to re-start the program". No choice is given, I just push the restart button, APERTURE quits, launches again- but it does not open the project file. Just the startup screen is seen, and then the menu- but no window.
If I check for the Aperture Library.aplibrary file, it is there, in the correct folder, now 42 GB, which corresponds to the size of the backup file.
I do not have a chance to open it, however.
Even if I Quit the program, throw away com.apple.Aperture.plist (from >Library>Preferences) and re-start it again, it won't open the Library File. Just nothing comes.
Throwing the Aperture Library.aplibrary file, it causes APERTURE to create a new one upon start-up. If I then re-import the backup file, the same thing will happen again: Once the re-import finished, it will not open the project window any more.
I absolutely NEED to access these photographs. Please help.
Thank you,
Markus
Mac Book Pro 17'' Dual Core, 200GB, 2 GB RAM Mac OS X (10.4.9)
Mac Book Pro 17'' Mac OS X (10.4.9)
Mac Book Pro 17'' Mac OS X (10.4.9)

Thank you so much, David, for your efforts!
I had tried this, but no result.
As APERTURE worked as soon as I had thrown the BIG library (the program just created a virgin library, which worked when importing pictures), I presumed the problem was the library file.
Even if I get upset that this kind of data base file is not bullet-proof, storing thousands of pictures which have enormous value (and where even the BACKUP file seemed to be corrupted, as the problem came up restoring the backup file!), I started from the idea that the problem was this library file.
So, I...
- made APERTURE create a virgin library.
- opened the old (corrupted?) library file by option-clicking on the file and clicking onto "Show Packet Content".
- I IMPORTED the different "xxx.approject"-files by hand into the new library.
This took me a quite while, but now it seems the system is up again.
Some photographs (shot in Nikon RAW format) show as "not supported file", I have to see how to deal with this, and if for example by exporting them I can save something.
I now made a backup, creating a new vault, and it worked with no error messages. Also controlling the vault file, everything seems to be there.
So, "somehow" all is saved, even if the real problem has not been found. This is why I will not set the flag on "Answered question".
As I mentioned before, I think that this data base handling of APERTURE has to be (nearly) 100% safe, as Mac OSX is.
It just HAS to work, no chance to arrive to "corrupted files" or something like this.
Apple: Build in automatic database repairings, make sure the backup files ARE ok (mine was not, it seems), do whatever is necessary for not leaving any possibility for "inconsistent files" or stuff like that.
If these things just CAN (and do) happen, the software is not worth a penny.
The photographs just HAVE to be in a secure place, like money brought to bank just HAS to be safe there. If even the BACKUP file is corrupted, WHERE is the security for my photographs?
Apple, if you wish to play in the "professional filed", this just HAS to work. No other choice.
Thanks again David for your efforts!
Markus
Mac Book Pro 17'' Mac OS X (10.4.9)
Mac Book Pro 17'' Mac OS X (10.4.9)

Hi is there any other help available? as my posts are not getting answered?

hi i am really getting upset about the amount of hours i am spending trying to resolve my itunes problems and wondered if anyone on here knows if there is any kind of online tech support or if i can't get an answer on here what i should do next - i would be grateful for any advice on this as i have come to a dead end.
my original question was posted on here at 12.18 today.

hi there!
we are other users, in USA we're just waking up....
In the USA, if you have an iPod, you get one call in the first 90 days. 1-800-APL-CARE
I don't know what it is in the UK.

I am running windows 8. cannot get itunes to install on my computer

I tried upgrading to newere version of itunes, and then it would not run, it said not responding. I have tried 3 times to unistall itunes 3 times and then reinstall and nothing happens. I am nearly at the end of my rope with this, I am getting upset with it. Anyone have answers. I have tried unistalling everything related to itunes on the computer, expect icloud.
Thank You
Gary
<E-mail Edited by Host>

Hello Gary,
We've an article that provides a host of troubleshooting steps that can help get iTunes working on your PC.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Does anybody have any solution for a non-functioning key on a macbook pro

Product Name: Macbook Pro 13", 5,5, Mid 2009
OSX: 10.6.8
Description of problem: The right arrow key will not work or function.
Other details: At startup, when a button either the Apple, Finder, File, etc are pressed the highlighter moves to the right and repeats moving to the right as if the right arrow key is stuck. When another key (any) is pressed it stops and all other keys function properly. The right arrow key will not work.
Steps I have tried to resolve the issue. Rebooting, SMC reset, removing key tab and cleaning.
Any ideas????

Hi JamilMereck,
first of: you can edit previous posts in a time-frame of some minutes (haven't measured it ...).
After that they become non-editable.
I admit I have used microphones some years back with and without PCs (have switched to Macs 2.5 years ago).
But I always had the mics connected to a mixing desk, which provided Phantom Power.
Since I gave up my 'Singing Career' (wasn't good enough) I also abandoned the use of microphones.
To your questions:
It might be that PCs with specified Microphone-In ports are also providing power to them or the microphones themselves do not need any power.
And the 'compatible with...' refers to the usage on computers in general.
The iMic from Griffin works with OSX 10.5 (scroll down on the webpage to 'Product Compatibility' the left icon symbolizes OSX 10.5).
As said above, I am no longer up-to-date in usage of microphones, but when you want to use a microphone with the standard connector you have to get either a microphone preamp or a mixer.
If you use the mic only (really only) with your Mac Pro, you might wanna look for USB-connected mics from Samson or Audio Technica for example.
And don't get upset, I understand you fully and any kind of 'insult' is for the manufacturers and not for me
Stefan

Poor Customer Service

I am shocked at the level of poor customer service I get from Adobe sales reps on a consistent basis. It is as if Adobe assumes their products are without peer - so the sales team can take its customers for granted. I recently subscribed to the $19.99/month for Acrobat pro. I inquired if I wanted to upgrade to the full Creative Cloud for $49.99/month how could I upgrade. I received a wide spectrum of bizarre responses that ranged from, n you can not upgrade to you must first cancel your Acrobat subscription, pay the termination fee - and then create a new subscription for the entire Creative Cloud. Each sales rep seemed very tenuous at best and when I would inquiry further that it did not sound right - then they all would be very snarky and sarcastic. I was shocked at the level of unprofessional behavior from your sales team. It is as if Adobe does not have a culture of personal accountability when it comes to dealing with the customer.
I fine it very odd if Adobe is serious about providing CLoud Services, why it does not make the subscription model more flexible and upgradable for the customer. I am also not sure why Adobe does not make this something that a customer can simply do on their own by logging into their account. Evernote, Dropbox, Google - these are all services that allo the cusotmer to upgrade to more features and services online in a matter of seconds - as opposed to forcing customers to call in that crazy phone menu hell - then deal with snarky phone reps that sound unsure of themselves but then get upset when you ask follow up questions.

Attached is the letter I sent to correspondance, I haven't heard back from
them so I don't know if it has been addressed yet.
I was with Sprint for over 10 years, when I changed to Verizon my bill went
up, however I was willing to stick it out because the customer service was
so much better. I have been very surprised at the service I have gotten
through all of this.
I really didn't want to leave that post on the community board, but I was
not getting any help. However, today, someone was able to help me get the
Asurion claim for my sons phone. Kudos to that rep. It amazes me how I can
speak with 3-4 people, give them all the same information and EACH AND
EVERYONE of them gives me a different answer. I had spoken with probably 4
people before the one today and gave them the same information (probably
more) and not one of them resolved the problem the way this one did nor as
promptly!
Thank you for following up with me, I hope you can help me get these
matters resolved.
Tricia Godwin
On Sat, Apr 18, 2015 at 2:39 PM, Verizon Wireless Customer Support <

HT203254 MacBook Pro 2007 NVIDIA GeForce 8600M GT issues

I have a MacBook Pro from 2007 that all of a sudden went black. Unfortunately it was out of warranty by one month when it happened. What would be the least expensive way to replace the NVIDIA GeForce 8600M GT graphic processor. Also, is there a way to use a different graphic processor?
Is it difficult to replace it by myself? Thanks...

Hi Reddmanz
How interesting! I posted a reply to you this afternoon asking about Mr. Cook and it appears it was never posted.
It appears a nerve has been touched - how strange. Fortunately I took a print of the discussion page so that's stuffed up their corporate effort - what a load of plonkers. I do have to deal with CEO's, SVP's and the like. All is well until their little apple cart is upset. I have no idea who, or should I say at what level, the editor is that makes these decisions. In most cases they have a lot to learn about corporate trust and public relations. It is highly likely that the person responsible is at a very low level. If he does not think so, he will when he reads this.
Ah well, no Steve to write to - it will have to be the other one - is his name Cook?
Best regards to all and do not get upset by one lowly corporate plonker.
TY
PS To Mr. Plonker - I've been using and buying Apples since 1986 - probably a long time before you were born.
PPS I suppose you pull this before it goes out but at least you will have read it.

My app works in IDE but not when packaged as a JAR, advice please?

Hello,
I've written my application which seems to work perfectly in my IDE, however when I package the application into a JAR, the JavaVM isn't happy with it. When executed, the JVM crashes somewhere early in my program (I'm guessing when it's loading resources) and I get a nice crash dialog from my OS describing some low level stuff.
So my reason for posting is to gather some advice or guidance on how to tackle this. Is there a simple way to debug a program when it's in JAR form?
Any comments will be welcomed! Thanks.
CRASH INFO - just in case it's useful!! :)
EXC_BAD_INSTRUCTON (0x0002)
0x0000000D
Thread 0 Crashed:
0    JVM_RaiseSignal + 595867
1    JVM_RaiseSignal + 596054
2    JNI_CreateJavaVM_Impl + 49220
3    JVM_Write + 18645
4    callback + 317
5    0 + 25151061
6    __CFRunLoopDoObservers + 342
7    CFRunLoopRunSpecific + 1548
8    CFRunLoopRunInMode + 61
9    0x1000 + 14040

Those links you posted proved very useful. Using OS dumps a log file which points out an offending library. After a bit of googling, I manage to found out that it was coming from the SWT framework which my app is built on. I've written tons of SWT apps before but I've no idea why this one get upset when I run it?
I've since took the time to compile and run a Windows & Linux version and they both work perfectly.
Thanks for the help on this and judging my current situation I think it would be best to speak to the Eclipse/SWT people as this problem has gone slightly 'off-topic' :)

GETTING UPSET

Similar Messages

Maybe you are looking for