GetURL:: works for all but my client!

I have a two buttons at the end of a movie that should go to
next page when clicked. Works great for me on PC with XP or Vista
and IE 6 & 7, FF 2 and Netscape 7. Works on Mac OS 10.2 with
Safari. Works on my friend's Mac with OS 10.3.9 and IE 5.2. Does
not work for my client who has a similar set up to my friend. Works
for her with Safari but not with IE 5.2. The button that has
animation animates but goes nowhere for her.
Link to page:
http://sandeegibsonphoto.com/
I am using an absolute path. Load Movie from preloader was
used to get to that main SWF if that makes a difference.
Also can't find an old version, like Flash 7 to put on my Mac
with IE 5.2 so I can't test here. Flash Player 9 does not support
IE for the Mac.
Thanks if anyone can help me.
-Sue

I have the original misbehaving SWF file online, yes. My old
Mac Powerbook is on dialup with no antivirus software, so I
hesitate to go online with that unless I have to. But you're right,
I should test it online too. (My main computer, a PC, is on
broadband with antivirus)
I'll tell you something really weird about this. With the
original SWF file when I have it connected to my web site as I do
for testing the web site the buttons work for her. When I uploaded
it to her web site on the same web host, different domain, the same
file would not work. I haven't checked the HTML page it's embedded
in really closely to see if there is a difference, but I actually
downloaded the SWF file, from my web site and uploaded the same one
to hers and it didn't work for her even though it worked for her on
mine.
I'm using a preloader, a SWf file, made with SWF Lock 'n'
Load that is the file that is loaded first and it calls the main
SWF with LoadMovie from the preloader file. Unfortunately, SWF Lock
'n' Load does not make a .fla file to examine to see what's going
on. I made the main movie myself in Flash 8.
-Sue

Similar Messages

Vacation Rule works for ALL but not for particular notification in Item typ

Hi,
I have a situation where Vacation Rule is Ignored when choose the select option in notification page of vacation rule and notifications were being sent to Original Approver (who created the vacation Rule) instead of delegate.
Vacation rule is working perfectly when choose the notification as ALL but is not working when given a particular message(Timecard Approved,Approve Requisition).
Below is some example of this inconsistent behavior:
1. Selected Item type as OTL Workflows for Employees, For this Item Type there are 3 Notifications as
TIMECARD_APPROVED,ERROR_MESSAGE,TIMECARD_APPROVAL_INLINE in select opition.
If i select the TIMECARD_APPROVAL_INLINE notifications are going to delegate, and for TIMECARD_APPROVED not going to delegate.
2. Selected PO Approval, It contains only one Notification(PO_PO_APPROVE). So it is working fine.
3 Selected PO Requisition Approval,it contains the 4 notifications.
PO_REQ_APPROVE_SIMPLE_JRAD, PO_REQ_APPROVE,PO_REQ_INVALID_FORWARD,PO_REQ_NO_APPROVER.
If i select the PO_REQ_APPROVE_SIMPLE_JRAD notifications are going to delegate, and for PO_REQ_APPROVE not going to delegate.
Any inputs on this.
Version 11.5.10.2 RUP 6.
Regards,
Ajith

Hi,
on problem I spot is that all your components created by the forEach loop have the same ID value. I suggest you change the ID to e.g. id="soc_#{item.index}" for zhe select one choices. In addition, I don't see where you refresh components after the change
Frank

Submit Button Works for Me but Not Client

I have created an interactive PDF form, using Adobe Acrobat 7, for my client so they can pass it to their clients. It's basically an agreement form where they have to sign and date then press the submit button to email it to my client when finished. I used the combo box tool to create the submt button: Under the Actions Tab I chose mouse up for the Select trigger, Submit a form for the Select Action, selected PDF completed form and the URL as mailto:clients email address.
I tested it on myslef and saw that it opens Windows Live, which is my main email program, and it successfully opened the email with the attached PDF ready to send. I then sent the file to my client, who uses Adobe Reader 8, and says that when she presses the submit button an error message pops up saying operation not allowed.
At this point I'm fairly stuck on what I should to to make this work. Any suggestions as to how I can fix this or why it is doing this? Thank you.

George Johnson wrote:
As mentioned by others, you can configure the form to submit just the form data, but only if it doesn't included digital signatures. You'll need to send the entire PDF if it does.
Acrobat 8 is not the latest version, so Adobe no longer sells it. Acrobat 10 (X) is the latest version. Also, why are you using a combo box instead of a button?
Mostly because I'm very new at interactive PDF's. This isn't my usual job for them, just helping them out. They gave me a link to a tutorial site for interactive PDF's and this is how they showed me to do it. So I really don't know anything about these, that's why I am here.
If a button is the way to go then I'll try it. I went a ahead and did that and sent a test to my client to see if it works better.

Ps Actions work for all but one person in office. Same Software... Alignment bug/settings?

I have created two photoshop actions that convert a PDF into jpg pages, and then slices those pages into pre-sized pieces, and saves the pieces out individually. Two versions, for two differently sized PDFs.
We use this in the office for creating a "book" visual from a tricky indesign file.
Both actions work fine for me.
Both actions work fine for coworker#1.
However, when Coworker #2 uses either of these actions, the chopped up pieces to not align properly in photoshop, and instead leave blank sections where they should have been merged together. (align box A top. Align box A to Shape_gutter. the second step never happens.
This 'error' occurs on both PDF Styles' actions for cowroker#2, so I'm assuming it has to be a setting? We are all running the same version of photoshop (Up to Date CC 2014), and testing on the same files.
anyone have any insight?

Everything is not exactly the same you state one is different. There is something different in the mix. A broken file a bug in the install in the system there is a difference some place. You see different results... Perhaps a different level of code are plug-ins involved other actions etc.
Post the action let us look at it/them.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
 Cheers, Tom

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Firefox(20.0.1) is ignoring my proxy server for google searches from website and the search box. It works for all other search engines and chrome/safari.

firefox(20.0.1)
squid (port 3128) and dansguardian (port 8080) not running in transparent mode.
I am applying blacklists and a custom url regex to apply "safe=vss", this works for all browsers and all search engines except firefox using google search engine.
Search engines tested (bing, yahoo, norton, ask, amazon, avg, ebay) - all work.
Links from the search results are blocked by content filter, but search results still appear and google images are still shown. This does not happen in Chrome(23.0.1271.97), IE9(9.0.8), Opera(12.14) or Safari(5.1.7) with the same settings.
No log entry appears in Dansguardian access.log implying proxy settings are being ignored for just this combination.

I can't think of a reason that one particular webpage would behave differently from all the others, i.e., if you are starting at google.com and running a search using the form in the page, I'm not aware of any reason for Firefox to handle that specially just because it's Google.
Does it make a difference if you disable JavaScript when using Google? If that yields the results you expect, perhaps Google's XMLHttpRequest AJAX traffic is bypassing your filters?
The search bar has its own code, so someone would need to look at that to see whether/why it bypasses your proxy if the above hypothesis does not apply.

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

My sound works for music but not apps

My sound works for music but not apps

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

S/MIME lookup works for ActiveSync, but not OWA.

Hi,
I posted this a while back and it still stands. https://social.technet.microsoft.com/Forums/en-US/1f16aabc-da7e-40a5-9a2d-f584e3bbf5de/owa-2013-an-error-occurred-while-signing-this-smime-message-no-certificate-was-found?forum=exchangesvrgeneral
However, I found that SMIME seems to have been working all along. From one mobile, I'm able to encrypt and send, and the other I'm able to encrypt and send. Both mobiles decrypt using their respective certificates. Why would this work for
ActiveSync, but OWA simply cannot lookup the user's certificate or tells me no certificates were found for recipients. Are they matching different criteria somehow? I know that the user definitely has a valid certificate for the fact that ActiveSync
is able to retrieve the public keys.

Hi,
To allow OWA sending and receiving S/MIME-protected messages. We need to use the
Set-SmimeConfig cmdlet to manage this feature through the Exchange Management Shell interface.
Based on the S/MIME settings for OWA in that thread, the value of
OWAAlwaysEncrypt parameter is false. The OWAAlwaysEncrypt
parameter specifies whether all outgoing messages are automatically encrypted in Outlook Web App. The
OWAAllowUserChoiceOfSigningCertificate parameter specifies whether to allow users to select the certificate to use when they digitally sign email messages in Outlook Web App.
Please try to use the following cmdlet to enable it
Set-SmimeConfig – OWAAlwaysEncrypt $true – OWAAllowUserChoiceOfSigningCertificate $true
Best Regards.

SQL*Plus variable assignment works for 8i but not 9i

We have scripts that connect to each database on the box and perform database tasks nightly. The scripts first set the environment then connects to each database with SQL*Plus. This works for 8i but fails in the recently created 9i environment. (Unix Solaris environment)
Because the SQL*Plus connection appears in many areas in the scripts, we assign the following connection string to a variable:
SQLPLUS="/usr/oracle/product/9.2.0/bin/sqlplus -s 'xxx/xxxxxx@xxxx as sysdba'"
Export SQLPLUS
echo "$SQLPLUS"
(This echo out correctly: /usr/oracle/product/9.2.0/bin/sqlplus -s 'xxx/xxxxxx@xxxx as sysdba')
It fails when the script calls the assigned variable:
$SQLPLUS <<-EOF
with the following error:
Usage: SQLPLUS [ [<option>] [<logon>] [<start>] ]
where <option> ::= -H | -V | [ [-L] [-M <o>] [-R <n>] [-S] ]
<logon> ::= <username>[<password>][@<connect_string>] | / | /NOLOG
<start> ::= @<URI>|<filename>[.<ext>] [<parameter> ...]
"-H" displays the SQL*Plus version banner and usage syntax
"-V" displays the SQL*Plus version banner
"-L" attempts log on just once
"-M <o>" uses HTML markup options <o>
"-R <n>" uses restricted mode <n>
"-S" uses silent mode
However, if I remove the SQLPLUS variable assignment and changed all occurrence of
$SQLPLUS <<-EOF to
/usr/oracle/product/9.2.0/bin/sqlplus -s 'xxx/xxxxxx@xxxx as sysdba' <<-EOF
Then the script runs successfully. But this solution is cumbersome.
Any ideas as to how to have the script work with assigning the SQLPLUS variable????
Any help is appreciated.

I has an immediate suspicion it might be related to the issue
mentioned in
http://otn.oracle.com/support/tech/sql_plus/htdocs/sub_var2.html#2_7
but this proved wrong: the SP2-306 still occurs in the latest
SQL*Plus.
I wonder what version of 8i you had working? With an old SQL*Plus
8.1.7.0 my connection failed the same as in 9.2 and 10i.
My solution was to do:
SQLPLUS='sqlplus -s'
UNPW='/ as sysdba'
$SQLPLUS "$UNPW" <<EOF
EOFThis worked in 9.2.0.5, 10.1.0.2 and 8.1.7.0.
One common security risk on UNIX remains: putting the username and
password on the command line. On some systems a "ps" command will
show the password to any user. If OS authentication cannot be used
for connection, perhaps putting the username/password in the SQL
script may be more secure?
A final note is that in SQL*Plus 10g, no quotes are needed around
AS SYSDBA, i.e.
sqlplus / as sysdba works from the OS prompt, whereas in 9.2 you need to do
sqlplus "/ as sysdba"This makes a solution easy:
SQLPLUS="/usr/oracle/product/10.1.0/bin/sqlplus -s xxx/xxxxxx@xxxx as sysdba"-- CJ

SQL*Plus assignment works for 8i but not 9i

We have scripts that connect to each database on the box and perform database tasks nightly. The scripts first set the environment then connects to each database with SQL*Plus. This works for 8i but fails in the recently created 9i environment.
Because the SQL*Plus connection appears in many areas in the scripts, we assign the following connection string to a variable:
SQLPLUS="/usr/oracle/product/9.2.0/bin/sqlplus -s 'xxx/xxxxxx@xxxx as sysdba'"
Export SQLPLUS
echo "$SQLPLUS"
(This echo out correctly: /usr/oracle/product/9.2.0/bin/sqlplus -s 'xxx/xxxxxx@xxxx as sysdba')
It fails when the script calls the assigned variable:
$SQLPLUS <<-EOF
with the following error:
Usage: SQLPLUS [ [<option>] [<logon>] [<start>] ]
where <option> ::= -H | -V | [ [-L] [-M <o>] [-R <n>] [-S] ]
<logon> ::= <username>[<password>][@<connect_string>] | / | /NOLOG
<start> ::= @<URI>|<filename>[.<ext>] [<parameter> ...]
"-H" displays the SQL*Plus version banner and usage syntax
"-V" displays the SQL*Plus version banner
"-L" attempts log on just once
"-M <o>" uses HTML markup options <o>
"-R <n>" uses restricted mode <n>
"-S" uses silent mode
However, if I remove the SQLPLUS variable assignment and changed all occurrence of
$SQLPLUS <<-EOF to
/usr/oracle/product/9.2.0/bin/sqlplus -s 'xxx/xxxxxx@xxxx as sysdba' <<-EOF
Then the script runs successfully. But this solution is cumbersome.
Any ideas as to how to have the script work with assigning the SQLPLUS variable????
Any help is appreciated

I has an immediate suspicion it might be related to the issue
mentioned in
http://otn.oracle.com/support/tech/sql_plus/htdocs/sub_var2.html#2_7
but this proved wrong: the SP2-306 still occurs in the latest
SQL*Plus.
I wonder what version of 8i you had working? With an old SQL*Plus
8.1.7.0 my connection failed the same as in 9.2 and 10i.
My solution was to do:
SQLPLUS='sqlplus -s'
UNPW='/ as sysdba'
$SQLPLUS "$UNPW" <<EOF
EOFThis worked in 9.2.0.5, 10.1.0.2 and 8.1.7.0.
One common security risk on UNIX remains: putting the username and
password on the command line. On some systems a "ps" command will
show the password to any user. If OS authentication cannot be used
for connection, perhaps putting the username/password in the SQL
script may be more secure?
A final note is that in SQL*Plus 10g, no quotes are needed around
AS SYSDBA, i.e.
sqlplus / as sysdba works from the OS prompt, whereas in 9.2 you need to do
sqlplus "/ as sysdba"This makes a solution easy:
SQLPLUS="/usr/oracle/product/10.1.0/bin/sqlplus -s xxx/xxxxxx@xxxx as sysdba"-- CJ

Will face time work for all users on my Macbook

I want to purchase the FaceTime App for my MBP, but i want to be sure that it will work for all users on my MBP. My wife and I (much to my dislike) share my MBP and When i go out of town, I want to be able to use the FaceTime app to chat with her and my son. We use seperate App store accounts for our Iphones (3g and 4s) will this matter?
Thank you

You posted your MBP question to the "Intel iMac Forum." I would recommend reposting in either the Macbook Pro Forum or the Lion OS Forum.
Hope this helps

GetURL:: works for all but my client!

Similar Messages

Maybe you are looking for