GG configuration - Changes are not replicating from Source to Target

Hi,
I am new in golden gate configuration. I have set up GG between two oracle databases to replicate the changes from source to target database.
But when I update or insert in HR.JOBS table in source, it is not propagating to target. I didn't find any error in error log.
Could you please help me to suggest the configuration I did wrong here?
SOURCE Database information
===========================
Database Name : SRISRI(10.2.0.1) , Hostname : ggs-1.cu.com(Linux 64 bit)
Oracle GoldenGate Delivery for Oracle Version 11.1.1.1.1 OGGCORE_11.1.1.1.1_PLATFORMS_110729.1700
GGSCI (ggs-1.cu.com) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING EXT_1 00:00:00 00:00:01
EXTRACT RUNNING PUMP_1 00:00:00 00:00:08
GGSCI (ggs-1.cu.com) 3>
Error Log
=====================
2012-02-12 15:08:34 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT EXT_1 starting.
2012-02-12 15:08:34 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, ext_1.prm: EXTRACT EXT_1 starting.
2012-02-12 15:08:35 INFO OGG-01513 Oracle GoldenGate Capture for Oracle, ext_1.prm: Positioning to Sequence 55, RBA 11345936.
2012-02-12 15:08:35 INFO OGG-01516 Oracle GoldenGate Capture for Oracle, ext_1.prm: Positioned to Sequence 55, RBA 11345936, Feb 12, 2012 3:00:14 PM.
2012-02-12 15:08:35 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, ext_1.prm: EXTRACT EXT_1 started.
2012-02-12 15:08:35 INFO OGG-01055 Oracle GoldenGate Capture for Oracle, ext_1.prm: Recovery initialization completed for target file /app/ggs/trail/local_trail_1/ta000001, at RBA 1307.
2012-02-12 15:08:35 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, ext_1.prm: Output file /app/ggs/trail/local_trail_1/ta is using format RELEASE 10.4/11.1.
2012-02-12 15:08:35 INFO OGG-01026 Oracle GoldenGate Capture for Oracle, ext_1.prm: Rolling over remote file /app/ggs/trail/local_trail_1/ta000001.
2012-02-12 15:08:35 INFO OGG-01053 Oracle GoldenGate Capture for Oracle, ext_1.prm: Recovery completed for target file /app/ggs/trail/local_trail_1/ta000002, at RBA 1025.
2012-02-12 15:08:35 INFO OGG-01057 Oracle GoldenGate Capture for Oracle, ext_1.prm: Recovery completed for all targets.
2012-02-12 15:08:35 INFO OGG-01517 Oracle GoldenGate Capture for Oracle, ext_1.prm: Position of first record processed Sequence 55, RBA 11345936, SCN 0.873188, Feb 12, 2012 3:00:14 PM.
2012-02-12 15:09:07 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): start pump_1.
2012-02-12 15:09:07 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host 218.186.40.99 (START EXTRACT PUMP_1 ).
2012-02-12 15:09:07 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT PUMP_1 starting.
2012-02-12 15:09:07 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, pump_1.prm: EXTRACT PUMP_1 starting.
2012-02-12 15:09:07 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, pump_1.prm: EXTRACT PUMP_1 started.
2012-02-12 15:09:12 INFO OGG-01226 Oracle GoldenGate Capture for Oracle, pump_1.prm: Socket buffer size set to 27985 (flush size 27985).
2012-02-12 15:09:12 INFO OGG-01055 Oracle GoldenGate Capture for Oracle, pump_1.prm: Recovery initialization completed for target file /app/ggs/trail/remote_trail_1/tm000001, at RBA 1435.
2012-02-12 15:09:12 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, pump_1.prm: Output file /app/ggs/trail/remote_trail_1/tm is using format RELEASE 10.4/11.1.
2012-02-12 15:09:12 INFO OGG-01026 Oracle GoldenGate Capture for Oracle, pump_1.prm: Rolling over remote file /app/ggs/trail/remote_trail_1/tm000002.
2012-02-12 15:09:12 INFO OGG-01053 Oracle GoldenGate Capture for Oracle, pump_1.prm: Recovery completed for target file /app/ggs/trail/remote_trail_1/tm000002, at RBA 1063.
2012-02-12 15:09:12 INFO OGG-01057 Oracle GoldenGate Capture for Oracle, pump_1.prm: Recovery completed for all targets.
GGSCI (ggs-1.cu.com) 3> view report ext_1
** Running with the following parameters **
EXTRACT ext_1
USERID ogg, PASSWORD ***
setenv (NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1")
Set environment variable (NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1)
EXTTRAIL /app/ggs/trail/local_trail_1/ta
discardfile /app/ggs/trail/local_trail_1/SRISRI_discard.txt
GETUPDATEBEFORES
TABLE HR.*;
Bounded Recovery Parameter:
BRINTERVAL = 4HOURS
BRDIR = /app/ggs
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 8G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 16G
CACHESIZEMAX (strict force to disk): 13.99G
Database Version:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.WE8ISO8859P1"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8ISO8859P1"
2012-02-12 15:08:35 INFO OGG-01513 Positioning to Sequence 55, RBA 11345936.
2012-02-12 15:08:35 INFO OGG-01516 Positioned to Sequence 55, RBA 11345936, Feb 12, 2012 3:00:14 PM.
2012-02-12 15:08:35 INFO OGG-01055 Recovery initialization completed for target file /app/ggs/trail/local_trail_1/ta000001, at RBA 1307.
2012-02-12 15:08:35 INFO OGG-01478 Output file /app/ggs/trail/local_trail_1/ta is using format RELEASE 10.4/11.1.
2012-02-12 15:08:35 INFO OGG-01026 Rolling over remote file /app/ggs/trail/local_trail_1/ta000001.
2012-02-12 15:08:35 INFO OGG-01053 Recovery completed for target file /app/ggs/trail/local_trail_1/ta000002, at RBA 1025.
2012-02-12 15:08:35 INFO OGG-01057 Recovery completed for all targets.
** Run Time Messages **
2012-02-12 15:08:35 INFO OGG-01517 Position of first record processed Sequence 55, RBA 11345936, SCN 0.873188, Feb 12, 2012 3:00:14 PM.
TABLEWildcard resolved (entry HR.*): TABLE HR.JOBS;
Using the following key columns for source table HR.JOBS: JOB_ID.
GGSCI (ggs-1.cu.com) 4>
GGSCI (ggs-1.cu.com) 1> view report pump_1
** Running with the following parameters **
EXTRACT pump_1
USERID ogg, PASSWORD ***
setenv (NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1")
Set environment variable (NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1)
RMTHOST ggs-2.cu.com, MGRPORT 7809
RMTTRAIL /app/ggs/trail/remote_trail_1/tm
PASSTHRU
TABLE HR.*;
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 8G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 16G
CACHESIZEMAX (strict force to disk): 13.99G
Database Version:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.WE8ISO8859P1"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8ISO8859P1"
2012-02-12 15:09:12 INFO OGG-01226 Socket buffer size set to 27985 (flush size 27985).
2012-02-12 15:09:12 INFO OGG-01055 Recovery initialization completed for target file /app/ggs/trail/remote_trail_1/tm000001, at RBA 1435.
2012-02-12 15:09:12 INFO OGG-01478 Output file /app/ggs/trail/remote_trail_1/tm is using format RELEASE 10.4/11.1.
2012-02-12 15:09:12 INFO OGG-01026 Rolling over remote file /app/ggs/trail/remote_trail_1/tm000002.
2012-02-12 15:09:12 INFO OGG-01053 Recovery completed for target file /app/ggs/trail/remote_trail_1/tm000002, at RBA 1063.
2012-02-12 15:09:12 INFO OGG-01057 Recovery completed for all targets.
** Run Time Messages **
Opened trail file /app/ggs/trail/local_trail_1/ta000001 at 2012-02-12 15:09:12
Switching to next trail file /app/ggs/trail/local_trail_1/ta000002 at 2012-02-12 15:09:12 due to EOF, with current RBA 1307
Opened trail file /app/ggs/trail/local_trail_1/ta000002 at 2012-02-12 15:09:12
TABLEWildcard resolved (entry HR.*): TABLE HR.JOBS;PASSTHRU mapping resolved for source table HR.JOBS
GGSCI (ggs-1.cu.com) >
######################### Target database information ##############################################
Database Name : THAKUR(10.2.0.1) , Hostname : ggs-1.cu.com(Linux 64 bit)
Oracle GoldenGate Delivery for Oracle Version 11.1.1.1.1 OGGCORE_11.1.1.1.1_PLATFORMS_110729.1700
Error log
==========================================================
2012-02-12 15:09:07 INFO OGG-01677 Oracle GoldenGate Collector: Waiting for connection (started dynamically).
2012-02-12 15:09:07 INFO OGG-01228 Oracle GoldenGate Collector: Timeout in 300 seconds.
2012-02-12 15:09:12 INFO OGG-01229 Oracle GoldenGate Collector: Connected to 218.186.40.99:47496.
2012-02-12 15:09:12 INFO OGG-01669 Oracle GoldenGate Collector: Opening /app/ggs/trail/remote_trail_1/tm000001 (byte -1, current EOF 1435).
2012-02-12 15:09:12 INFO OGG-01670 Oracle GoldenGate Collector: Closing /app/ggs/trail/remote_trail_1/tm000001.
2012-02-12 15:09:12 INFO OGG-01669 Oracle GoldenGate Collector: Opening /app/ggs/trail/remote_trail_1/tm000001 (byte 1435, current EOF 1435).
2012-02-12 15:09:12 INFO OGG-01735 Oracle GoldenGate Collector: Synchronizing /app/ggs/trail/remote_trail_1/tm000001 to disk.
2012-02-12 15:09:12 INFO OGG-01735 Oracle GoldenGate Collector: Synchronizing /app/ggs/trail/remote_trail_1/tm000001 to disk.
2012-02-12 15:09:12 INFO OGG-01670 Oracle GoldenGate Collector: Closing /app/ggs/trail/remote_trail_1/tm000001.
2012-02-12 15:09:12 INFO OGG-01669 Oracle GoldenGate Collector: Opening /app/ggs/trail/remote_trail_1/tm000002 (byte -1, current EOF 0).
[oracle@ggs-2 ggs]$
GGSCI (ggs-2.cu.com) 1> view report rep_1
** Running with the following parameters **
REPLICAT rep_1
ASSUMETARGETDEFS
setenv (NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1")
Set environment variable (NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1)
USERID ogg, PASSWORD ***
MAP HR.*, TARGET HR.*;
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.WE8ISO8859P1"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8ISO8859P1"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
GGSCI (ggs-2.cu.com) 2>
Thanks
Tarun

Hi,
I have used below statements for ADD EXTRACT and ADD REPLICAT.
------Extract
ADD EXTRACT ext_1, TRANLOG, BEGIN NOW
-------Data Pump
ADD EXTRACT pump_1, EXTTRAILSOURCE /app/ggs/trail/local_trail_1/ta, BEGIN NOW
-------Replicat
ADD REPLICAT rep_1, EXTTRAIL /app/ggs/trail/remote_trail_1/tb, BEGIN NOW, CHECKPOINTTABLE ogg.tarun_chk
Yes, i have tried tutorial at Oracle Learning Library.
Thanks
Tarun
Edited by: user8886876 on Feb 12, 2012 9:56 PM

Similar Messages

Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

Why IDocs are not arrived from Source System

Hi all,
Now a days we are facing regular problem to load master data?
We are getting Error Message - "No Idocs arrived from the Source system".
I need to know, Why this error will be occurred?
Is there any reason for this Docs are not arrived from the Source System?
Please help me to analyze this error, why its happened regularly? what could be possible reasons for this error?
Its very urgent, please help me as early as possible.
Thanks in Advance. I will asign the points for relevent answers.
Regards,
Sudharsan Reddy.

Hi ,
SOME OF THE CHECKS:
1.You can check the RFC destination using the transaction SM59 in the system. Then do Test connection and this should not cross more than 1000ms. The connection should establish within 1000ms.
If it crosses more than 1000ms the tRFC entries will not be cleared fast.There will not be any job to push Transaction recorded entries it will go through SMD(Shared Master Data) Tool.
So if it crossed more than 1000ms, then you can ask your Basis team to check the network connectivity b/w R/3 and BW system.
If there is no serialization for these IDocs then you can use button F6 to process these entries in tRFC manually.
2.Go to SM58 and check the LUW .If any error ..then selecting the failed Idoc, click edit in the menu and execute LUW.
3.If there are many Idocs with status red then check the system performance also. If performance os the system is bad then, we can put the mail to basis guys they will check and restart the BW system. (or) it may be due to problem in the coding,since data transfer is taking long time.
4. Some times it may be due to much parallel process at the info package level and make the Max parallel process into one process in RSCUSTV6, save and run the infopackage. This may be due to space problem.
( Or )sbiw>general settings>maintain control parameters for data transfer. Both in BW and R/3 we configure in the same way.
There we need to give
1.source Sys name
2.Maximum KB in one data package.
3.Maximum lines in one data package.
4. Frequency (specifies after how many no. of data records, status record should be sent)
5. Max processes ---Reduce the number process, save and try.
6.Target Sys name.
Regards,
Dhanya.

Delta data changes are not reflecting from ODS to another infocube

ODS1 --->Infocube1 - Field1,field2,field3
ODS2 -
> Infocube 2 -
Field 2-1,2-2,2-3,field2-4
Both datasource information are totally different.
Delta changes are captured in the field3 in ODS1 and Infocube 1 also.
Field3 and Field 2-3 is the same field .Infocube 2 - I have included infoobject and populating the value from ODS1-Field3.
The question is
Whenever I capture the changes from ODS1-field3 -the similar changes also needs to be updated here in infocube2 -field2- 3.
Start routine : I have created code like ,
SELECT field1 field2 field3
INTO CORRESPONDING FIELDS OF TABLE IT_field
FROM /BIC/aods1.
Update rule routine : Select the field2-3 in the characteristic- routine
READ TABLE IT_field INTO LS_field
WITH TABLE KEY
field1 = COMM_STRUCTURE-field2-1
Field 2 = COMM_STRUCTURE-field2-2.
Result = LS_field -field2-3.
If I load the full load to infocube 2 -no problem.
Is their any other way Can I capture the transactional data changes in infocube 2.
Advance thanks

Thanks for quick update. You are right.
There is no problem from ODS1 --->Infocube1 - Delta is working properly.
My question is ,
ODS1 has a field 3. Whenever new changes happen for this field3 - I have to capture the simialr changes in the Infocube 2 and the fieldis 2-3.
field3 and field 2-3 is the same field infoobject .
Whenever the changes occurs inthe tranasation - ODS1-field 3 will capture the changes. How can I capture the similar changes in Infocube 2 and the field 2-3.

Changes are not updated from ECC to CRM How to debug

Hi,
QCs 1140049726 and 1140047459 were updated in P20 system to remove the WBS. This was done per normal P20 process and instructions. P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
CSP still shows these QCs as having a WBS assigned to them. This is incorrect. It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
How to proceed with it. How to debug from ECC to CRM.
Prem.

Hello Prem,
Could you please have a look at SAP note 656823?
This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
Hope this could be helpful.
Best regards,
Maggie

Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved

Configuration is not replicated from CRM to ECC for configurable product

Hi,
We have some materials in the system for which the configuration is not replicated from CRM to ECC.
We create a quotation in CRM and configure it. In CRM, the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
Please find below finding
1. If the same material is created in another plant/company code, the configuration is replicated properly.
2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC), it is properly exploded and complete.
3. variant prices are replicated properly even though components are not replicated.
We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
Please advise.
Thx.

the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

HT1386 When I try to sync changes from my playlist to my iphone the sync process gets to step 7, applying changes and then freezes up, the changes are not being put on my iphone. What do I do to correct this issue?

When I try to sync changes from my playlist on the computer to my iphone the sync process gets as far as step 7, applying changes, then freezes up and the changes are not getting to my iphnoe. How do I fix this issue?

Are all these songs associated with the same Apple ID or were some purchased on another account?
Are they tagged properly? In the library does it break an album out into several different albums with a few tracks each?
Check your sync settings for each device. Do you accidentally have only certain songs/albums syncing?

AD Changes are not reflecting our Share point

We are using our exchange 2010 server has our messaging solution. we are also use our SharePoint 2010 for our portal.
we are enabled multiple domain( abc.com, xyz.com) in our exchange and able to send and receive mails properly.
for some reasons we have changed the [email protected] to
[email protected] in our AD and Exchange.
but in our sharepoint work flow it shows only
[email protected] only. the AD Changes was not replicated in our share point.
anybody help in the issue was appreciated.
awaiting for the update from anybody eagerly.
Jags

The User information list for that site collection will be out of date.
You will need to ensure that:
The UPS Sync process is configured and working
The user is currently 'Active' in the site (get them to log into it)
The UPS Sync job (to sync UPS to site collections) is running.
To confirm this; check their properties in the hidden user information list on the site collection, check their profile in the UPS, check the synch history and if necessary the MIIS logs and then finally run the timer job.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Changes are not reflecting using af:resource for adding CSS

Hi,
I am trying to add new CSS file(say the name as customNew.css) to page template using af:resource tag, the changes are not reflected. Instead I see(using firebug) that, styles coming from different CSS file(say the name as customOld.css ) which configured on trinidad-config.xml and trinidad-skins.xml files.
I was under the impression that, the new CSS file(customNew.css) will override the old css (customOld.css). So, CSS added using af:resource tag will not override any other CSS ???
Any help will be appreciated
Thanks,
San.

Hi,
if you bring CSS to the browser through af:resource then this is not overriding any skinning definition. Skins can only changed in trinidad-config.xml file (which also can be done at runtime). Just adding a CSS file to af:resource wont do the trick here.
Frank

To verify all the values are properly transferred from source db to target db which command works better?

Hi,
i need to validate all the source values are transferred properly from source db to target db .but i confused which is the right command to use between except & exists.
if 100 records in source then i need to validate all the 100 records should be there in target db.
i used below queries:
using exists:
Select upc_desc from DBO.MIC_TARGET
t1
where not exists
Select 1 from produ_stg
where DESCRi3= t1.UPc_desc
using except:
SELECT descri3 from produ_stg
except
select Upc_desc from MIC_Target.
please help me which query is correct to validate source and target db values are same replica.
Regards,
Jagadeesh

You can use EXCEPT here.
NULL will not consider in NOT EXISTS whereas EXCEPT takes care of the same.(Except is nothing but Distinct and then Not exists)

Maven giving "annotations are not supported in -source 1.3" for @Entity

I m using maven for spring, hibernate with jpa . When i m running comman "mvn clean install" ,it is giving error in compilation of a bean class which is using jpa annotations.The error is :
annotations are not supported in -source 1.3
(use -source 5 or higher to enable annotations)
@Entity
Pom.xml is as below :
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.niit.core</groupId>
<artifactId>Spring3Example</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<name>Spring3Example</name>
<url>http://maven.apache.org</url>
<properties>
<org.springframework-version>3.1.2.RELEASE</org.springframework-version>
</properties>
<repositories>
<repository>
<id>JBoss Repo</id>
<url>https://repository.jboss.org/nexus/content/repositories/thirdparty-releases</url>
</repository>
</repositories>
<build>
<plugins>
<plugin>
<artifactId>maven-war-plugin</artifactId>
<version>2.0</version>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-context</artifactId>
<version>${org.springframework-version}</version>
</dependency>

<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
<version>${org.springframework-version}</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>javax</groupId>
<artifactId>javaee-api</artifactId>
<version>6.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-core</artifactId>
<version>3.6.10.Final</version>
</dependency>
<dependency>
<groupId>org.hibernate.java-persistence</groupId>
<artifactId>jpa-api</artifactId>
<version>2.0-cr-1</version>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-entitymanager</artifactId>
<version>3.5.0-Beta-2</version>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>2.5</version>
</dependency>
</dependencies>
</project>
And class is as below :
package com.niit.form;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.Id;
import javax.persistence.Table;
@Entity
@Table(name="CONTACTS")
public class Contact {
@Id
@Column(name="ID")
@GeneratedValue
private Integer id;
@Column(name="FIRSTNAME")
private String firstname;
public String getFirstname() {
return firstname;
public void setFirstname(String firstname) {
this.firstname = firstname;
public void setLastname(String lastname) {
this.lastname = lastname;
public Integer getId() {
return id;
public void setId(Integer id) {
this.id = id;
}

java version is 1.6.0_24
There is no settings.xml in users/.m2
I think , maven is using default settings.xml which is in M2_HOME\conf which has everything commented as below:
<?xml version="1.0" encoding="UTF-8"?>


<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">




<pluginGroups>

</pluginGroups>

<proxies>

</proxies>

<servers>


</servers>

<mirrors>

</mirrors>

<profiles>


</profiles>

</settings>

CVI 2013 UIR changes are not implement on subsequent build.

I have noticed that on a compiled project if you change the visibility of a UIR object, these changes are not reflected on the subsequent build. There are files that are set to recompile but in least some cases the change to the UIR is not reflected by a "build" (or Ctrl M).
Using the new "Rebuild" command from the pull down menu does reflects the expected behavior (the changes to the UIR are seen).
This may be considered normal operation and / or been previously reported, but it was new to me.

Hello blakney, CVI-User,
blakney, it sounds like the bug you've reported originated in the Patch f1. The bug id is 433769 and the fix is likely to be included in our next release.
Two workarounds for the issue are:
- Use Rebuild every time you make a UI change (if you're using the option).
- Disable Embed project .UIRs when in Debug configuration and only embed them when you create your release product. The option to embed is configuration-dependent, meaning you can set the debug and release behaviors separately.
Regarding your latter post, [I find that local path UIRs sometime get "lost" in Release64 builds. They link fine in Debug64 mode though.], could you please attach a sample project?
CVI-User, your case might fall under the same use-case (id, 433769). However, could you please attach a sample project, so we can double-check?
Thank you and best regards,
= Nelu F. || National Instruments.

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

GG configuration - Changes are not replicating from Source to Target

Similar Messages

Maybe you are looking for