GGB0 Asset Master Validation of fields on different tabs, on SAVE button
Hi, Experts.
For the the validation step in GGB0, I need to trigger the validation step when the SAVE button clicked in AS01.
The point is, you have to trigger the validation step with ANY tab-screen in AS01 is ACTIVE ( General , Time-dependent, Allocations ...)
Requirement:
When following 2 conditions are satisfied, show error message and let the user to change the Capitalization date.
Cond.1: the Capitalization date ( ANLA-AKTIV ) on 'General' tab is one specific value, YYYYMMDD , not Blank.
Cond 2 : the City(ANLA-GDLGRP) on 'Allocations' tab includes one special value XXXXX, not Blank.
I implemented the check and activated with OACV,
with FGT = 'A' and logical field group is 002 ( Posting information ) .
The prerequsite on GB00 is as follows.
[ (ANLA-GDLGRP <> 'XXXXX' ) AND ( ANLA-GDLGRP <> '' ) ]
The check is as follows.
[ ANLA-AKITIV <> 'YYYYMMDD' ]
The current behavior on AS01 is as follows:
The check works well only when you click SAVE with 'General' tab active.
However, it does NOT work on different tabs ( Allocations, Time-dependent, and so on... ) are active.
Normally, the users hop around different tabs in AS01, and finally SAVE.
So I can not expect which tab is active when the 'SAVE' was clicked....
Need help & thank you lot in advance
The link mentioned by you ToonS is not acessible.
Here is the link:
http://msdn.microsoft.com/en-us/library/office/gg615466(v=office.14).aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Similar Messages
-
Asset Master - Business Area field [time dependent tab]
Business Area field is gray with or without value if i create an asset either from scratch or with reference .
I did check with u201CDefine Screen Layout for Asset Master Datau201D. & u201CSpecify Chart-of-Dep.-Dependent Screen Layout/Acct Assignmentu201D
Still not able to change the field of business area in the asset master .
Is there any other config setting needed to be changed , please let me know.
Thanks & regards
sumanDear,
Suman.
Please follow the path and make the changes :-
SPRO ---> Financial Accounting New ---> Asset Accounting -
> Master Data -
> Screen Layout -
> Define Screen Layout for Master Data.
Select your respective Screen Layout. Go to Time Dependent Tab Double Click on Field Group Rules.
Select MnNo & Sbno. And save. And then run AS02. I hope this solve your issue.
Please revert for further clarification.
Regards,
Pankaj Bhalerao. -
Asset master validation GGB0 and OACV
Dear All,
I want to create a validation in Asset maser time-dependent tab to make sure the Responsible cost center of the WBS element and Cost center of asset master should match, if not, error should thrown. my problom is in logical field group 3(time dependent data) already there is validation in OACV, so system is not allowing me to create one more validation in the same area, when i try it is throwing error " an entry already exits with the same key ".. so i written my logic in the old validation which checks location, it is working fine. and some people are saying when it moves to production it will overwrite the original one. but we moved from dev client to quality, we did not find any problom, both the logics in one validation are working fine, what happens if move to production,.
is it overwrite the old validation.
cant we give two validation in the logical field group 3( time dependent tab.),, your inputs are highly appreciated.
validation for asset master.- GGB0
per company code activation for asset master.- OACVHi,
You should simply add additional step in your current validation, without creating a new one. So, in OACV the definition stays the same; only there will be a new step within your current validation.
Regards,
Eli -
Hi All,
I have Created a Validation for Asset Master on company code and asset
class in GGB0. When the company code is 1000 asses class range should
be between 1010 to 1080.But the validation is not working. Could anyone
provide information in this concern as the project is in go live phase.
TCode: GGB0
Validation: AVAL_1
Step:
Prerequisite
ANLA-BUKRS = '1000'
Check
ANLA-ANLKL = '1010' OR ANLA-ANLKL = '1020' OR
ANLA-ANLKL = '1030' OR ANLA-ANLKL = '1040'
OR ANLA-ANLKL = '1050' OR ANLA-ANLKL = '1060'
OR ANLA-ANLKL = '1070' OR ANLA-ANLKL = '1080'
Message
Enter related asset class for the Company Code
Saved the above and activated in OACV in the same client as following.
1000 A 1 AVAL_1 Asset class -cocd validation 1 active.
While checking in AS01 transaction it is not validating for the asset
class range which are not in the declared.
Is there anything else from this to activate or any other procedure
need to be followed.
regards
PSNGHi,
You should simply add additional step in your current validation, without creating a new one. So, in OACV the definition stays the same; only there will be a new step within your current validation.
Regards,
Eli -
How to add new fields in asset master data
Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
PedroHi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur -
Making Useful life field optional in Asset master creation(AS01)
Hi all,
I want to make 'Useful life' field in 'Depreciation area' tab as optional in AS01 (Asset master).
1. I made the screen layout changes using AO21 and made Useful life optional
2. I assigned the above screen layout in OAYZ
Despite doing this, during asset master creation, the field still shows as 'Required' and not as 'optional'.
Am I missing anything else? Kindly provide some pointers.
Thanks,
SrideviHi Sridevi
Please check your depreciation key. If your depreciation is based on useful life, the key is required regardless the field status.
Thanks
Sanjeev -
Asset master -field status control
Hi..
Iam creating Asset master (as01)..In Dep Area Tab in asset master I have
1)01 book dep
2)15 Tax bal.sht.
The problem here is the 15 Tax bal.sht dep.area is in dispaly mode ..so i cant input the dep key,useful life....
Can any one tell from wher I can change the status of the dep area 15 in asset master data from display to CHANGE.Check the following T.codes:
OA77:screen layout for asset master data
OA78: for screen layout for asset depreciation area
before that you have confirm are you using group asset for tax depreciation
Edited by: Anil Kumar Potnuru on Feb 24, 2009 3:27 PM -
Depriciation key and useful life periods in asset master should in display mode only
Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek -
Business area default in asset master record
Dear all
Here is one ticket pertains to asset
when i create asset master record business area will be defaulted
the problem is when i upload asset master record through LSMW
by different business area the system throws a error message BUSINESS AREA EXISTS WHICH CANT BE REPLACED THROUGH LSMW
This is happening for all the asset classes
so i want to remove that default business area from where should i remove that which t-code or menu path
regards ravindra kumarDear ravinagh
removing of business area in asset master record is always possible but
see when u r uploading bulk asset master records through LSMW we cant replace the business area as it is already defaulted in asset master record
means some where we have assigned the default values to the asset classes or some other master record
so we have to find out the source of the defualt business area for asset master record
when we remove this from the asset classes then the business area will not be defaulted so that we can upload assets from LSMW with different business area
so please try to find out the source....................
regards
ravindra kumar -
Asset master update while doing GR.
currently we have one requirement that when we purchase a material then assign to an asset. then during GR in MIGO, we want the serial no ( manually entered) to be copied in that asset master - serial no. field...
is there a way of solving this ??
Regards,
AninditaHi,
The transaction for master data subsitution in AA is OACS.
However, this subsitution will be activated only on certain activities such as creating an asset or changes to master data. In your case, it is not the situation.
You could find more info in the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71fd71448011d189f00000e81ddfac/frameset.htm
You could still try it, but I'm afraid you will have to look for a solution with your ABAP-team to see whether they could use a user-exit or write a special development for that.
Regards,
Eli -
hi folks,
can u share the TABLE NAME FOR ASSET MASTER
Thanks in Adv
Regards,
Varmahi Prasad,
ANLA Asset Master Record Segment
ANLB Depreciation terms
ANLBZW Asset-specific base values
ANLC Asset Value Fields
ANLE Asset Origin by Line Item
ANLH Main asset number
ANLI Link table for investment measure -> AuC
ANLK Asset Origin by Cost Element
ANLP Asset Periodic Values
ANLQ Period values from dep. posting run per po
ANLT Asset Texts
ANLU Asset Master Record: User Fields
ANLV Insurance data
ANLW Insurable values (year dependent)
ANLX Asset Master Record Segment
ANLZ Time-Dependent Asset Allocations
hope this helps
ec -
I have four mandatury fields in a page and one submit button.Among that one was read only field and another one is drop down list.If all four fields are populated then only save button should be enabled,otherwise it should be disabled.
Can any one help me this?
Here is my code...
private if (customercode.text=="" ){Csave.enabled=
false; return;}if(customername.text==""){
Csave.enabled=
false;
return;}
function validation():void{ if(geo.text==""){
Csave.enabled=
false; return;}
if(cmblistunit.selectedIndex==-1){
Csave.enabled=
false;Alert.show(
"Error:Customer type cannot be null.Please select a valid Customer Type!"); return;
Csave.enabled=true;}
If geo field(read only) value is selected last,then save button is not enabling.
Message was edited by: sudheerChThe property represents the "property path" from the object (the formulation spec data object, in this case) that you are trying to validate to the property you want to be required.
To get to the reason for change, you first have to access the SpecSummary property of the formulation spec, then the SpecSummary's FreeTextReasonForChange property, and then the FreeTextReasonForChange's ReasonForChange property. So your property should be "SpecSummary.FreeTextReasonForChange.ReasonForChange"
If you are using the DatabaseAndObjectSchema document, you can traverse these property paths, but just remember to use the property's name, not its type, in the property path.
You can learn more about the DatabaseAndObjectSchema document in the Extensibility Guide's Developer Information section in the Appendix, and in the Appendix of the ValidationTraining powerpoint presentation, under ReferenceImplementations\Validation\Documentation folder.
Edited by: Ron M on Jun 20, 2012 4:19 PM -
How to validate a field in Asset master?
Hi,
I have requirement like need to validate field ANLA-TYPBZ,
Data uniquely passing to this field, i need to check whether data already exist or not while creating asset master using AS01 transaction.
eg: suppose ANLA-TYPBZ = 12345' entry is there in the table, if i tried to post the data using AS01 as '12345', it should give error message.
Thanks.hi,
Follow the below steps:
1. create a validation in GGB0 at node Assets - > Master Data
2. create a routine in program where these validations were written. It is a copy from RGGBR000
3. activate validation: append a record in transaction OACV
http://wiki.sdn.sap.com/wiki/display/ERPFI/Validations
Regards
Alok
Edited by: alpatr on Nov 21, 2011 8:12 AM -
Creating a new Validation-Asset Master data
Hi ,
Requirement- a warning msg to popup when the capitalized date in AS01 ( under posting information) is a date in a previous fiscal year.
A new validation step was created in GGB0 with the rule:
Prerequisit: Capitalized on < Acquisition yr (ANLA-AKTIV < ANLB-VYEAR)
Check:Capitalized on < Acquisition yr (ANLA-AKTIV < ANLB-VYEAR)
Message:Capitalization is done in a previous year (warning)
and in OAVC,
the validation was made active for the respective company code.
However , an asset creation is possible for a previous fiscal year but the warning message did not pop up.
Please assist.
Thank you,
Niludini AHi Niludini
you can simulate the validation rule by clicking at - GGB0>> Asset accounting > select the validation rule> select step " " and then select simulation option in the dropdown under Validation tab.
After activating simulation, please try to create a new asset in another screen without closing the similation tab in order to understand whther the validation is triggerred correctly.
Please also verify that, validation is created under master data and prerequisite may be added as T code - "AS01" .
Best Regards
Jomon -
WBS Field in Asset Master Record
Hi All,
Currently we are working in 4.6 C version.
The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
The standard functionality is available in ECC6
Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
Regards,
NitinHi
@ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
@ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
I never worked on 4.6, but I guess WBS must be allowed for usage
br, Ajay M
Maybe you are looking for
-
Data in a narrative view.
Sorry if this is simple. Just want to display the multiple values from a report prompt, not dashboard prompt, in the report. My effort has taken me to the narrative view and am using @12 to display the values in the column which has been filtered. Bu
-
InDesign CS5.5 crashes when trying to open ANY CS5.5 document
I am using InDesign CS5.5 and can't open any of my InDesign CS5.5 documents. The message "InDesign has stopped working" appears. Even when trying to create a new document, again the message "Adobe InDesign CS5.5 has stopped working" - close programme
-
Hairline-crack in Macbook Pro display-- what to do?
Hi all, I have a MacBook Pro 13" that was bought in early February, and a few days ago I noticed a hairline crack (not a scratch) on the top left of my screen. it's met the centre left side of my display now. It's very thin and shallow, I initially t
-
What is tolerance key? I heard it is for assign permitted price difference to a purchase req. what does it means? How to set/maintain the same for PRS?
-
Hi, I have created a vendor list for a two vendors and a product category and with reference to respective backend contracts. When I tried to create a describe requirement shopping cart for this product category, system does not show me the list of a