Girder plugin for MSI Vox remote control

Hi!
Since I bought a VOX USB2.0 for using in my laptop I found the remote control useless cause it only works with the MSIPVS (that I don't use) and there was no plugin for it.
So, recently I had some free time and I developed a plugin that allows me to control my pc with this little remote control.
If there's someone else interested in this plugin I can make it available to download.
Samuel

Hi!
I have installed Christv v4.99, Grider and downloaded config files for VOX on Promixis site (thanks Alexis!!!). I can see that remote will work (have tried some of functions and it works) but my problem is:
Christv doesn't give me good quality picture like Fly 2000 TV. If I try to change some settings in "Program settings" then it is reflecting to CPU usage! My fun on laptop is very loud when it is hot, so it disturbs me too much
I am attaching Print screen from my current settings (pic on Christv is black but not on my PC) but if I change advanced settings for Greedy HM it doesn't remember it after shutting down Christv. If anyone have lower CPU usage and good pic quality with Christv it will be very nice if (s)he post it here
Sorry for my bad english
http://img126.imageshack.us/img126/2959/screenki7.jpg

Similar Messages

Girder Plugin for MEGA 180

Hi folks
I'm writing girder plugin for the MEGA 180 remote control. Unfortunatly it works just until reboot and that happens on any system - not only on MEGA 180.
Perhaps some of you are familiar with girder plugins and can tell me where the bug is.
http://n.ethz.ch/student/nschmid/MSIStuff/MSIGirderPlugin.zip
Plase read the README first.txt file for installation, watch the code, test the binary and tell me if you have the same problem. The source code need Borland C++Builder to compile.
I started also a thread in the girder forum.
Thank for helping me.
Nathan

Hi people
I've found the error and it is corrected. Additional I added the new device id I've got from Girder developer. I think the plugin will be soon aviable on Girder webpage.
Please heck out new version at
http://n.ethz.ch/student/nschmid/MSIStuff/, read the installation notes and download with the link.
Jadi wrote:
Quote
Now all I have to do is to program Girder for: ...
Please publish your configuration file. I think it will be a peace of interest for everyone.
Habe a nice day
Nathan

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook

http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers

Girder plugin for FX-5600 IR remote control

Ok, the plugin for Girder it's here, thanks to gumidek, the developper!!
Here is the link:
http://sweb.cz/j.tuma/MSIRemote-1.0.zip (it's very slow but only 260k)
Now, we can use the remote control with ANY program (winamp included ) ) )
For those who still don't know much about Girder:
http://www.girder.nl
Here is the thread in the Girder forum that "born" the plugin:
http://www.girder.nl/phpBB2/viewtopic.php?t=4857
Now I'm working to make a "general" .GML file to launch and control different usual applications.
Gumidek is THE MAN ! )
Costin

Quote
Originally posted by blubix
Hello to everyone.
I have lately bought FX5600-VDTR128. Card works fine, but when i installed MSI Media Center II i was woeful.
From MSI page i downloaded remtctrlsdk.exe and after some test i decided to develop my own program for using remote controler.
After some part of code i was wondering about memory usage.
Some observation showed memory loss (8kb per second, reading remote data one per 50 milisecond).
After some program diagnostic MEMPROOF showed memory loss inside RemtCtrl.Dll. Probably some pointers are not freed during remote data read.
Some users have problems with girder with plugin. This application works fine. The problem is inside RemtCtrl.DLL
I have three questions for MSI Support or forum users.
1. How to prevent memory loss?? I tryed to free library and handles, but it didn't work. Only termination of application get an effect.
2. Have anoyne correct version of RemtCtrl.Dll?? I know there are two version of this library delivered on CD's, but only one is working - (with memory leak).
3. When new version of this library or SDK package will be released??
Greetings to all forum users!
could you give me a link to the exact page from where you downloaded "remtctrlsdk.exe"? as I`d lyke to download it too.

Individual Script for Keys of Remote Control

Hello together,
within my actual project, i need any script which can set an action on the number-keys of the remote control. The user press for example the "0" or the "4", then another Title-Set or anything starts. Unfortunately it have to be the number key and not TITLE MENU or ANGLE Keys.
I don´t know if it is realizable with DVD Studio Pro.
Sorry for my bad english.
Thanks for your answers !
Greetings
Alex

You may check this thread to know even the add-on created by yourself may not have that option:
Script to install SDK Add-On
Thanks,
Gordon

Finding TV, DVD, etc. Codes for FiOS TV Remote Controls

Every so often someone posts a question about needing the code for their new TV, DVD player, etc, to program into their FiOS TV remote control. The remotes come with a small booklet that lists a number of codes, but I don't think it has been updated in a while, so codes for newer devices or brands may be missing. Verizon has some lists on the web, but they seem to be difficult to find (at least for me). Here are links to the web pages I have been able to find so far:
TVs: Link
DVDs: Link
Audio Receivers: Link
Audio Amplifiers: Link
If any of you have links to other Verizon web pages, or pages at other sites that provide code lists, I think it might be useful to folks to have them posted in one place.
Some things I wish Verizon would do:
1) Provide links in obvious places to the pages that already exist and are linked above (plus any other pages that might exist).
2) Update the pages on a regular basis. Or if they already do that, then put an update date on the page so we can tell when it was done.
3) Provide a link where people could send Verizon information on new devices they get or codes they discover. I mean a real email address or web page where the information would go directly to the right people instead of a generic email address with a canned response where we never know whether it actually went to someone or just was sent to the bit-bucket.
Any thoughts?
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248

Hi Adam,
I've got the same problem you had earlier this year, with the same Matsui tv/dvd combo unit and the Black remote. Did you ever get a successful resolution? If so would you mind sharing the solution with me, thank you?

HEY CREATIVE!!!! Where is the remote control plug-in for Mediasource 5?

I just upgraded to Mediasource 5 only to discover that this version doesn't offer any support for my Creative remote control. The remote control plugin on the downloads page says:
"This download is for all Creative MediaSource? (version 3.00.6 or later) users currently using a Creative remote control."
...But when I try to install this plugin, it doesn't recognize that Mediasource 5 is installed. The description should read: "version 3 ONLY".
I found other threads on this as well. The only resolution I found (aside from switching back to an earlier verision of Mediasource) suggested the use of third party software.
Come on Creative, Mediasource 5 and it's other plugins have been officially available for download for since Dec. 22, 2006. That's 7 months.
7 MONTHS!
I've got to admit that I use my remote too infrequently to bother going back to an earlier version of Mediasource but WTF, I shouldn't have to compromise.
It's things like this that contribute in a large part to Creative's loosing market share.

Anyone? I need the volume control panel to enable the spdif out to my external decoder!

Gaming remote control for BlackBerry phones

I am looking for a good remote control for playing gmaes on my BlackBerry Curve phone, a remote control which is compatible with all games, which has a driver software for my phone. Please suggest a good product. Also tell if Nintendo Wii Remote is compatible with BlackBerry phones or not.
Thank You

hello,
as far as I know the Wii is not compatible with BlackBerry devices.
Zeemote has released / will release soon a joystick for smartphones, including BlackBerry devices and Nokia devices.
http://www.google.com/search?hl=en&q=blackberry+zeemote
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Restrictions on "prompting user for permission" for Remote Control

How can I go about restricting the ability to enable/disable the
"prompt
for permission" on remote control to only network admins? We want our
Help Desk to be able to remote control workstations, but not be able
to
turn of the prompt for permission. Any help is appreciated.
Thanks,
Wayne

Wlac,
It appears that in the past few days you have not received a response
to your posting. That concerns us, and has triggered this automated
reply.
Has your problem been resolved? If not, you might try one of the
following options:
- Check the knowledgebase and SolutionNet databases at
http://support.novell.com
- Check all of the other support tools and options available at
http://support.novell.com
- You could also try posting your message again. Make sure it is
posted in the correct newsgroup.
If this is a reply to a duplicate posting, please ignore and accept
our apologies and rest assured we will issue a stern reprimand to our
posting bot.
Your Novell Support Connection Forums Team
http://support.novell.com/forums/

No Free Remote Controls

Why has Verizon changed their policies on free remote controls? In addition to paying for cable fees, I pay $38 per month for renting FIOS equipment that is 6 years old. They want another $15 for replacing one remote control. This is highway robbery.

Amen dmart.
I called, fully expecting a no hassle customer service experience. It isn't the $15, it is the fact that after spending $3,000 a year for 10 years the CSR is amazed that I think they should replace their broken equipment for free.
Verizon hates its customers. They can, because Comcast hates us too.
As bad as politicians and just as corrupt.

Remote control Sony video camera with Mac Mini?

Is it possible to connect an IR transmitter to a mac mini to be able to control a Sony camera from a remote location miles away? Specificaly, I want to be able to point my Sony IR remote control at my Mac Book Pro at home to control a video camera at work via the internet. Control features include focus, zoom, iris, White balance, etc. Is this possible? (The Sony camera comes with a remote control)

I never heard of such a device but there's a bunch of stuff in Google:
"Results 1 - 10 of about 611,000 for "long distance remote control."
Your best bet would probably be a telephone, with the person at the other end in the same room as the camera.

Remotely control iphone from PC without jailbreak

detail:
iphone4s
ios7
left side screen is not working
hey guys,i wanna ask,my left side screen is not working and i just installed ios7,it needs to connect to wifi to set/configure everything in but i cant type the wifi password due to my left side screen is not working.is it possible for me to remotely control my iphone from pc without jailbreak and PERMISSION(normally yes option is on the left side) since my left screen is dead.
please help guys.

No. It's not possible. Make an appointment at the genius bar and get it replaced.

Sony camera Smart RemoteControlsony camera smart remote control installation

I am trying to install the Smart Remote Control app on my iPhone for use with a6000. I install the PlayMemories parent app on my iMac (running Mavericks) but that parent app does not show up in Applications? ??? Any help in getting the latter installed or the former would be appreciated

I never heard of such a device but there's a bunch of stuff in Google:
"Results 1 - 10 of about 611,000 for "long distance remote control."
Your best bet would probably be a telephone, with the person at the other end in the same room as the camera.

Zenworks 10 SP3 and more than 2 monitors with Remote Control

I know Zenworks is touted as having support for "dual monitors", but will it support more than that for when using Remote Control? We have stations using 3 and sometimes 4 monitors.
Thanks

Hawk312,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

DMP 4400 Remote Control Simulation

Hi,
I need to please know how to send an HTTP MIB request to a certain DMP to simulate a "remote" key click if I don't now have a remote handy. Say I want to test the Yellow button after it is programmed. Can anyone help with the HTTP command string for this example?
Thanks

The Command to change or assign the button to a specific task is
correct.
The Command to execute the RED button is also correct for the DEFAULT
setting (which is "r"). Once you change the assignment to another value
the command (with the "r") is not correct and will not work.
The "irasrv" is what controls the remote command mappings. In this example; when
you press RED button, it interprets it and it is what sends to the "xfake" service "r",
which is mapped to the RED press button. So when you send a command directly to "xfake",
you are completely bypassing the "irasrv". And there is no way to send a keypress
directly into the "irasrv".
In summary, what this is saying the there is no way to send a command to the "irasrv"
(which is the infrared service for reading the remote control commands). We can
bypass this service to the next step to simulate the commands using the "xfake" service.
These are the commands in the second discussion thread that I posted.
the DEFAULT "xfake" commands work. But when you change them some may NOT work
based on the values that were changed in the key mappings.
In your case, the CAST string can not be passed in a MIB to the "xfake" service.
This has to do with commands and syntax in your remapped values.
The key mappings "do" work. I have tested them with a physical remote without issues.
Cheers!
T.

Girder plugin for MSI Vox remote control

Similar Messages

Maybe you are looking for