Giving over all the Parttion to Vista Using Bootcamp
I used Bootcamp to divide equally my partition between OSX and Vista Home Premium. I would like to give over the whole drive to Vista. Is this possible without deleting everything I have on the Vista partition. Also will I loose the Boot Camp drivers /settings etc I installed using the recommended burnt disk? Many thanks
Hi,
The best place to ask this question would be in the BootCamp forum:
http://discussions.apple.com/forum.jspa?forumID=1165
I'm a little curious by your question though and have to ask; presumably, the reason for the question is that you do not want to run OSX and only MS Vista. If that's the case, why buy a Mac when there are, obviously, much cheaper alternative computers out there?
Kryten
Similar Messages
-
I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things.
is there another way i can download the update? it just never work, tried multiple timeThe most common causes are:
Your antivirus, firewall or router security is blocking access to Apple's servers - try temporarily disabling them - if you have Kaspersky this is definitely the problem
At some time in the past you used this computer to jailbreak, unlock or otherwise hack ANY iPhone, iPod Touch or iPad - if this applies to you your hosts file is corrupt and you will have to edit it and remove any lines that contain "gs.apple.com" -
Not able to get all the results if i use "get-spdeletedsite" command
Hi everyone,
I am not able to get all the results when I use the below powershell command.
get-spdeletedsite -limit all
It is giving me only one site, but infact we have more than 100 deleted sites.
If I use the normal command like below it is giving the below output
get-spdeletedsite
Can any one tell me, how can I get all the deleted sites ?
Best Regards
Anil AlladiHi Anil,
For the Limit parameter of Get-SPDeletedSite cmdlet, when we specify its value to ALL, it will return all site collections for the given scope.
For your scenario, the script “Get-SPDeletedSite –Limit ALL” will return all deleted site collections in your SharePoint environment.
If you want to get all deleted site, you can export the result to csv as below:
Get-SPDeletedSite | export-csv out.csv -notypeinformation
Reference:
http://technet.microsoft.com/en-us/library/hh286316(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me outHi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
Is it possible to make an effect over all the finished film cuts etc
I have almost finished a project, i like the way it is but would like to soften the overall feel of the film.
Is there a way to place an effect over all the edits etc?
Or do i have to export the finished movie and put that to a new project sequence?
If so what is the best setting to export so that when i load back again i don't loose any quality?
Thanks GeeTry this step by step. It will help you understand better exactly what happens when you nest a sequence inside another sequence.
•Create a new sequence (File > New > Sequence). You will get a new timeline. (Make sure you create it with the same sequence settings as your original sequence ... see FCE > Easy Setup).
•Then drag your original sequence from the Browser onto the new sequence timeline. This nests your original sequence inside the new sequence.
•Then, +in the new sequence,+ apply whatever filters/effects you want to the original sequence.
In effect, when you nest sequences you can treat the nested sequence(s) as if they were plain old clips. It's a cool trick. -
How do I delete all the things on my used ipod
how do I delete all the things on my used ipod
In itunes I believe you can Click Edit > Select all and then you can press delete
Thanks!
~Derek -
How do you share some from photos from an album in iphoto to facebook without bringing over all the pictures?
Select the photo(s) and click share and share to the face book album you want
LN -
To get all the objects that are used inside the class
Hi All,
All i wanna know is to get all the objects that are used inside the class.
Ex :
Class A{
Emp e;
public add(Dept d){
e.deptid = d.deptId;
in this class i have two objects, one Emp obj and another Dept object.
I wanna get the details abt this class Emp and Dept by simply parsing the file and by not loading this class in JVM.
Could any pls hel me out.??
thx.I wanna get the details abt this class Emp and Dept
by simply parsing the file and by not loading this
class in JVM.Your problem statement is vague and the constraint is IMO hypothetical. -
i tied to sync my ipod to the itunes but, the apps wont sync it just says the apps will be replaced with the ones on the itunes library,but there isnt any apps on there, i deleted all the apps after i use to use the library for my old iphone helpp, the ipod used to be synced with a another i tunes libary that i have deleted now
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
You can only sync with one ITunes library. It you switch iTunes library iTunes will erase the iPod and replace it contents with what is in the library of the new computer. -
I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?
Purchase and use Paragon Camp Tune
-
How to list all the datatypes are being used in the database?
Is there any way you can list all the oracle datatypes are being used in the database?
Thanks,
ChauUse USER_TAB_COLUMNS or DBA_TAB_COLUMNS to determing various data type but USER_TAB_COLUMNS will show you what type being used by a schema user
-
My 5 year old son has purchased coins for a game on my iphone for the value of £139.00 TWICE! I have been billed for one purchase but the other was is resent and none of the coins have been used, can i cancel the purchase give the coins back and get a refund/ thats our food shopping money for the month
And go into restrictions and turn off in-app purchases.
You might also want to download and read the manual.
You can also go into your iTunes account on your computer, click on Report a Problem for that app and see if anything can be done. Terms of the App Store is all sales are final but doesn't hurt to try. -
All the SQL functions - to use in Discoverer-desktop reporting?
Hi ,
Can anyone tell me where i can find all the SQL functions, <conditional stmts> etc - to use in Discoverer-desktop reporting?.
Thx, SreeHi,
I am not quite sure what you mean. You can see all the functions available when you edit a workbook. Create a calculation and select the functions, your custom functions will be under database functions. Conditions are on the condition tab.
Rod West -
How do I pull over all the photos from camera uploads
How do I pull over all of the photos from my drop box camera upload?
grimescw wrote:
How do I pull over all of the photos from my drop box camera upload?
If you have Dropbox installed on any computer(s), your photos are already there. That's the whole point of Dropbox.
Just open the Dropbox folder on any of your computers. Anything you copy to that folder (directory) and anything you upload to your Dropbox account from any computer in the world, will automatically appear in your Dropbox in all of your computers.
Maybe you are looking for
-
Need 1200 driver for Mac 10.7.5
I connect to this printer via a wire. I've downloaded two drivers two different ways, but printer still won't talk to my computer. Please help! Thanks very much!
-
How can I withdraw my rss feed and cancel my podcasts?
I've got a podcast series that I want to withdraw. How do I cancel it?
-
My computer crashed and for reasons unknown to me, Mozy didn't back up my Mozilla Firefox files, which I realize are hidden but are no where to be found on Mozy's backup. All I have is my iphone that does have Firefox on it and a new computer. Howeve
-
XML Validation with multiple XSD files (referenced)
Hello, I know that XML validation with version 7.1 is possible now. However I was provided with a set of XSD files that have references to each other and need to be placed in a hierachical file system order so that references can be resolved. An elem
-
9iAS JSP/Tag Library Help needed
Info: We have 9iAS 9.0.2.0.0 running on Sun Solaris (Sparc). I have been to Sun class for JSP/Servlets (SL-314) and have an Iterator custom tag that works fine in Tomcat 4.0. I am compiling on a Windows NT machine using Ant and JDK 1.3. I then deploy