Is it possible to make an effect over all the finished film cuts etc

I have almost finished a project, i like the way it is but would like to soften the overall feel of the film.
Is there a way to place an effect over all the edits etc?
Or do i have to export the finished movie and put that to a new project sequence?
If so what is the best setting to export so that when i load back again i don't loose any quality?
Thanks Gee

Try this step by step. It will help you understand better exactly what happens when you nest a sequence inside another sequence.
•Create a new sequence (File > New > Sequence). You will get a new timeline. (Make sure you create it with the same sequence settings as your original sequence ... see FCE > Easy Setup).
•Then drag your original sequence from the Browser onto the new sequence timeline. This nests your original sequence inside the new sequence.
•Then, +in the new sequence,+ apply whatever filters/effects you want to the original sequence.
In effect, when you nest sequences you can treat the nested sequence(s) as if they were plain old clips. It's a cool trick.

Similar Messages

  • Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

    Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

    Hier kun je er meer over lezen; http://www.wikihow.com/Use-the-Cameras-on-Your-iPad-2
    En hier kun je meer informatie vinden over de iPad;  www.iPadforum.tk

  • Is it possible to delete an Effect sitting on the same effect plugin c++ code?

    Hello,
    Let me explain My problem.
    I have developing an Effect plugin, "MyEffect" .
    This effect has one UI + defualt "About" and "Reset" buttons + one "Remove " ( Which is a "Options..." ) button.
    The "Remove" button functionality is: When I click on "Remove" button, the "MyEffect" effect should remove from the Layer/Composion.
    The plugin EntryPoint function is called with a command "PF_Cmd_DO_DIALOG" clicking on "Remove" button. Here I want to remove this "MyEffect" effect from Layer/Comp.
    So, My question is, Is it possible to delete/remove an effect sitting on the same effect plugin c++ code?
    Hope, you understand the problem!.

    Hi Shachar,
    Thanks for your reply!
    >>     that separate AEGP of ours?
    Not getting the above line in your prevoius msg.
    Actually My question is, "Is it possible to delete an Effect sitting on the same effect plugin c++ code?", wrong.
    What exactly I want is...
    I'm developing an effect plugin, that execute 2 scripts.
    -     one script is for applying an effect ( we are discussing this issue in onother thraed, you already knew it. )     and
    -     other script is for removing an effect
    When I click on "Remove" button, the second script should executes and it removes the applied effect from the Layer/Comp.
    I'm just guessing that, 3 plugins are required to solve this problem.
    Plugin1:  Create UI + call plugin2 + call plugin3
    Plugin2:  Execute the script1 ( i.e., apply the effect )
    Plugin3:  Execute the script2 ( i.e., remove the effect )
    am I correct?

  • I wonder if I can get the lyrics (lyrics) are scrolled on the screen, as most lyrics is very large, and can almost never get the entire text box. is possible to make each verse appears, while the audio playback?

    I wonder if I can get the lyrics (lyrics) are scrolled on the screen, as most lyrics is very large, and can almost never get the entire text box. is possible to make each verse appears, while the audio playback? please help me???

    Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
    If you want to copy all the infor from an old iPod touch to the inew iPod see:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

    when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

    Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

  • Does the projects created in Final Cut Express transfer over to the new Final Cut Pro software?

    Does the video projects created in Final Cut Express transfer over to the new Final Cut Pro software?

    You want to go from FCE to FCP-X?
    You would need to do so in multiple steps.
    1) You would need to be working in a very late version of FCE.
    2) Open the FCE project in FCP-7.
    3) In FCP-7, export an XML of the sequence you wish to get to FCP-X.
    4) Purchase the software 7toX
    http://assistedediting.intelligentassistance.com/7toX/
    5) Import the XML into 7toX, export the FCP-X friendly file
    6) Import the converted XML into FCP-X
    7) Re-link all you media
    It should be noted that when you use XML, not all the things you have done in your original sequence will make it through the final translation. There is more information about this at the 7toX page linked above.
    MtD

  • I'm trying to make a resume. All the templates are in another language (spanish I think). How can I change to english??

    I'm trying to make a resume. All the templates are in another language (spanish I think). How can I change to english??

    Another one!
    The scary language is Latin, quotes from Cicero to be precise.
    It is Placeholder Text designed to show the appearance and layout of the document.
    You click in it, something most people try, and it is selected. You then type to replace it.
    Peter

  • Is it possible to get a count of all the class files in a Flash Builder project?

    Is it possible to get a count of all the class files in a Flash Builder project?
    Thanks!

    Resultsets are one per connection unless you have copied them. Do you have lots of connections are you properly reusing them or at least closing and discarding all references?
    See tutorial and Javadoc of API too

  • How do you share some photos from an album in iphoto to facebook without bringing over all the pictures?

    How do you share some from photos from an album in iphoto to facebook without bringing over all the pictures?

    Select the photo(s) and click share and share to the face book album you want
    LN

  • FM9: Possible to make "fit window to page" the default?

    I'm using FM9, structured, on Windows 7.  (My company recently upgraded from FM7.0.)  In FM 7.0, my documents seemed to remember the last zoom I had set, and if I saved them having set "Fit Window to Page", the next time I opened the document that setting would be in effect.
    This doesn't seem to be the case with FM9. Every time I open a document, its window fills the screen, and I need to manually fit the page to my preferred zoom (100 or 90%) from the Zoom status bar menu.  There are a lot of options for tweaking preferences for windows - I have not selected to open documents as tabs, for example - and I wonder whether a preference setting is preventing the fit window to page setting from being remembered per document, or whether there is any other way I can make that the default for opening documents.
    Thanks very much for your help.
    -- garyZ

    Still struggling with this, and the possible confounding factors, like differnet interface preference settings.  Some online research I've done seems to point to this being a problem in FM9, that is, setting a default zoom and fit for all documents.  There are some third-party plugins that say they can do this... but not for FM9.  So maybe the answer is "upgrade to FM 10", but that isn't an option for my department at this time.
    Further symptoms:
    - If I open all chapters in a book together in a single tabbed window, and explicitly set the first document to Fit Window to Page, I get what I want for that document, but as soon as I choose another chapter in anotehr tab, the window widens (I show a single page only), leaving a lot of gray empty window space.  I can explicitly set THAT document to Fit Window to Page, but when I click back on the first chapter I was working on, it opens wide; it has lost the Fit Window to Page I originally set for it.  Working that way, any time I change tabs, and frequently when I do operations like changing the conditional text that shows, the window containing all the tabs widens.  I would like to prevent that if possible.
    - Even when working on individual chapters, if I set one to Fit Window to Page (a setting that held, if I subsequently saved the document, in FM7) the setting is not (consistently, it seems) remembered, and the next time I open the single chapter, the window opens wide, or maximized (23" wide monitor) as if it is trying to give me a two-page view, but I'm only working with one page views (my preference because it's what I'm used to).
    - Regardless of how the files open individually (sometimes the zoom and fit seems to hold), when I open a book file, then use Open All Files In Book (having set the interface to NOT open all the files as tabs in a single window), I get this bizarre Time Tunnel effect whereby each chapter opens in a window that fits within the bounds of the previous chapter.  If the first chapter opens correctly, say 100% zoom and Fit Window to Page, the second opens at 100% zoom, but fits in the first, the third within the second, and if the book has enough chapters, the last chapters are vertically tiny, not showing more than a line or two of text.  So I need to manually rearrange and re-fit them all before I work on them.  What a pain.
    I have to say, the FM9 interface is awfully clunky.  I don't know if it's implemented (partly) using Flash or what, but whole book operations like opening or closing all files, saving a book as PDF, sometimes even just switching the conditional text that is shown generally result in a frozen screen and a title bar that indicates "not responding" for a couple of minutes before FM9 gets it's act together and returns (often with windows resized and zoomed).  It can be pretty frustrating to work with, and can really slow me down.
    I'm using structured FM, but not DITA - in house designed EDD, probably based on docbook, but I'm not sure.  FM9 is completely updated with available patches.
    I've tried playing with the different Interface Preferences, to see if that helps - variously having FM open files as tabs to share the same large tabbed window, or turning that off to have them open as individual files in individual windows.  I still cannot get Fit Window to Page to hold consistently.  It's a relatively minor nit, but it is annoying, and gobbles extra time for me to keep resetting the working environment as I like it.  I have set up a workspace for myself, but this doesn't seem to include the zoom settings, only the various palettes/panels and their states and positions.
    If anyone knows of or discovers a fix to this issue, your help would be much appreciated.
    -- garyZ

  • In iTunes, is it possible to sort by albums, without all the songs listed below each album title?

    It seems there was something in the recent iOS7 release that have made a few changes in the way itunes is viewed on the iPhone.  In the past I would sort by artist, which would then show all the albums. Now it shows all the albums, but with all the songs listed below each album title.  I have several artist with over 50 albums, I don't want to scroll through all of the songs.  I clocked it at 1.3 miles to scroll through all of them.  If I sort by album, it does not group by the artist, just the album title. Any possible way to get this view back?

    No, I meant if you tap on the album title in the Artist viewso, does it collapse the song listing? Next, I asked if all the songs were not on the phone, like the ones you showed in the photo (with the cloud symbol). It appears that most of these songs are not really on your phone. What happens if you go to Settings>Music>Show All Music>Off as I mentioned in the last post. Here is a screen shot of my music app in Artist view.
    This is a mix of songs purchased from iTunes and self-ripped CDs that I have in my collection.

  • Giving over all the Parttion to Vista Using Bootcamp

    I used Bootcamp to divide equally my partition between OSX and Vista Home Premium. I would like to give over the whole drive to Vista. Is this possible without deleting everything I have on the Vista partition. Also will I loose the Boot Camp drivers /settings etc I installed using the recommended burnt disk? Many thanks

    Hi,
    The best place to ask this question would be in the BootCamp forum:
    http://discussions.apple.com/forum.jspa?forumID=1165
    I'm a little curious by your question though and have to ask; presumably, the reason for the question is that you do not want to run OSX and only MS Vista. If that's the case, why buy a Mac when there are, obviously, much cheaper alternative computers out there?
    Kryten

  • How do I pull over all the photos from camera uploads

    How do I pull over all of the photos from my drop box camera upload?

    grimescw wrote:
    How do I pull over all of the photos from my drop box camera upload?
    If you have Dropbox installed on any computer(s), your photos are already there.  That's the whole point of Dropbox.
    Just open the Dropbox folder on any of your computers.  Anything you copy to that folder (directory) and anything you upload to your Dropbox account from any computer in the world, will automatically appear in your Dropbox in all of your computers.

  • How to make a photo "fit" with the surrounding film clips?

    I am working on a new project in which I have a photo which is "taller" than the other film clips, so consequently, when that clip is playing, one cannot see the top or the bottom because they have been cropped off to match the height of the other film clips.
    What can I do to make that picture "fit"? It is important because this is a photo of a person, not just landscape.
    -L
    Message was edited by: Lorna from Hawaii

    I clicked a button that said Ken Burns!!! I figured it out.
    -L

Maybe you are looking for