GL balance in FS10N not tally with KE5Z due to trx posted to FI but not CO

Hi,
Need help to solve this problem.
Some of our FI postings were not reflected in the Profit Center accounting therefore when we compare GL balances in FS10N against KE5Z, the figure does not tally.
Suspected when the transaction was posted, the cost element for the GL was not created yet.
ie GL account 123456 created in 01.10.2009, transaction posted in 06.10.2009, but the cost element for 123456 was only created on 12.10.2009. Therefore the transaction posted on 06.10.2009 only updates FI but not on the CO side. Not sure whether this is the actual reason or could be due to other reasons.
Is there any way to reverse/repost such that figures from the 2 tcodes tally? Thank you in advance.

Hi Azmin,
thanks for your reply, but I have actually tried using 1KE8 but I got an error log "Account xxx requires an assignment to a CO object". Therefore I wonder if there is any other tcode that I can use or should I perform certain step first before I can use 1KE8.

Similar Messages

My computer died rather rapidly so i had no chance to do a backup or anything. now i want to put itunes on my new computer but it will not sync with my ipod. i got my purchased music but not the playlists and it does not sync when i plug it in.

my computer hard drive died rather suddenly so i had no chance to do a back up or any thing. i put itunes on my new computer and got my purchased music but my ipod will not sync and i cannot get my playlists onto the computer. is there any way to get my playlists on my new computer and also get my ipod to sync. it is a waste of time to purchase new music and i do not want to purchase a new ipod since i have so much memory left on this one.

Thank you all for your replies. Here is what i ended up doing. I cannot afford any 3rd party software so i went to itunes and manually entered all my playlists. As I had indicated my purchased music was on my new computer just not the playlists and I could not sync my ipod. After I rebuilt all my playlists I tried to restore my ipod to factory defaults/new. All of the steps called for in apple support and elsewhere were not available to me. I connected my ipod, went to my computer, right clicked my ipod, and formatted. That wiped my ipod so when I connected to itunes it then gave me a restore option. I did the restore and all is good in the empire again. I can now buy new music and sync my ipod so I am a happy camper.
Thanks to all.

Assets balance Report(T Cd s_alr_87011964) Not Tally with GL Code in FBL3N

Hi Friends
SAP Standard Assets balance Report(T Code s_alr_87011964 and s_alr_87011963 ) Not Tally with GL Code in FBL3N.
In SAP report coming with Report Date but FBL3N coming with Posting Date
So How I add Posting Date input parameter in Sap Standard Report. Please help me
Thanks & Regards,
Hemant Kumar

Hi Vinod,
I hoe that you are doing reconcilation between Asset ledger & FI ledgers. Before that just run ABST ,there u can findout whatever the documents not assigned to FI.
Asset is subledger to GL.It is automatically updated through determination,while post GRN to capital goods.In somecases bsuiness remove the reconcilation acount and do some adjustments that time that report not match with FBL3N.
You can run ABST then u can get details
Best rgds
Mani

AR01 REPORT IS NOT TALLYING WITH GL BALANCE

Dear SAP Guru's
AR01 report is not tallying with CWIP gl. during our observation, we found that out of four CWIP assets two of them showing over balance and two of them showing under balance. but when i tried for settling these assets to actual assets, system shows no value for settlement. But when i try for Scrapping, system is allowing for scrapping from these CWIP assets. In General, when ever value is lying in the CWIP, system will allow for settlement, but why in these case it is not allowing. What could be the reason ..for .CWIP assets shows Under/Over value.
Please advice.
regds

Dear Ravi..
Thanks for your early reply...
01. As per the Program documentation, it shows that these report should be executed only before year end closing.
Is there any effect if i execute now.
02. For Your information, i know the exact difference of balance which both AR01 and CWIP GL shows, so to what extent this program ABST2)will help.
03.It would be helpful to me if you have any solution to resolve it.
04. Actually this problem was existing from more than 3 fiscal years...our auditors did not recognize it..now management recognised and want to rectify. If i reverse any entries it will effect previous Statutory reports, so without effecting the previous statements i have resolve it.
Regds,

Currency conversion - Line item total does not tally with account balance

hi guys!
we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
1. while trying to run program RFSEPA02 the following error is appearing-
   -Line item total does not tally with account balance
2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

put a break-point @
if t_balance_items_hw[] <> t_balance_account_hw[] or
     t_balance_items_tw[] <> t_balance_account_tw[].
    perform dequeue_account.
    message e099.
*   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
endif.
endform.                               " CHECK_ACCOUNT_BALANCE_2
and debug y it is getting the error.
Short text
Switch On Open Item Management by Changing Master Record
Description
This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
Requirements
No items can already be archived from this account.
Caution: Company policy must be in place to ensure that this does not happen.
Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
Output
When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
Regards
Prabhu
Message was edited by: Prabhu Peram

Reg:F.19 report figures are not tallying with gl account 208030. Why?

hi boss
F.19 report figures are not tallying with gl account 208030. Why?
pls urgent
amk

Hi,
We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
Is this the reason, that the system is showing differances in F.08 report.
Kindly help me
Thanks
Kishore
Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

Accumulated depreciation in FA not tally with GL account

Hi Expert,
We have a issue for the Accumulated depreciation in FA not tally with GL account. The amount for the accumulated depreciation in the GL initially uploaded (amount not correct difference by 1cents) is not tally with fixed asset module. We unable to adjust the amount due to the accumulated depreciation GL account is set to "Recon. account for acct type- A Asset". Standard SAP is not allowed us to change the error message to warning message.
Any idea how to settle this issue?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

How to fix the issue Total CN amount show in FSCM not tally with total CN amount in GSAP?

Hi ,
How to fix the issue that is Tolat CN amount show in FSCM not tallying with Total CN amount in GSAP?
Can somepone reply for this asap ?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

I've set up email on my iPad (talk mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this

I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

'''Except 8.0.x version also supported version is 3.6.24 '''you can find it here:
http://www.mozilla.org/en-US/firefox/all-older.html
check the system requirements:
http://www.mozilla.org/en-US/firefox/3.6.24/system-requirements/
see also:
[https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox Installing a previous version of Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

I have a new computer now with windows 8. Old one was windows 7. The itunes library contains all I expect on new computer. Ipod will not sync with content. It says it is syncing but only picks up 1 tune. Solution please. I am on itunes 64 but it makes no

I have a new computer now with windows 8. Old one was windows 7. The itunes library contains all I expect on new computer. Ipod will not sync with content. It says it is syncing but only picks up 1 tune. Solution please. I am on itunes 64 but it makes no difference from 32 bit.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Photo stream on my pc with windows 8 upload to my macbook (iphoto) but not to my ios devices.

Photo stream on my pc with windows 8 upload to my macbook (iPhoto) but not to my ios devices. On the other hand, and that is the funny thing, the shared picture folder on the pc is updated with new photos/pictures from my ios devices and from my macbook. Anyone has any idea of what is the problem? This drives me crazy because i can't upload a picture manually from the PC. Hopefully anybody have an answer. Thanks in advance.

Hi Naddod , I have the same problem. The same pc photostream receives new photos added using the photostream "add picture" button but ipad and iphone does not. If I take new photo from Iphone I can find it in Photostream of PC, Iphone and Ipad. Seems IOS error. Strange thing is that , if then I erase that new photo from the PC photostream, than it will be erased from photostream of PC, iPhone and iPad, erasing works, adding not.

GL balance in FS10N not tally with KE5Z due to trx posted to FI but not CO

Similar Messages

Maybe you are looking for