"GLIBC_2.3.3 not defined" problem when10g express installation in Red Hat9

I downloaded "oracle-xe-univ-10.2.0.1-1.0.i386.rpm" from Oracle website, and then
updated the Red Hat 9 with " libaio-0.3.96-3.src.rpm" patch. Now, the RH9 linux looks as below:
==========================
$ rpm -q glibc
glibc-2.3.2-11.9
$ rpm -q libaio
libaio-0.3.96-3
==========================
After that, I installed Oracle 10.2.0 express on the RH9 linux with below commands:
===========================================
$ rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
$ /etc/init.d/oracle-xe configure
============================================
When I tried to start SQLPLUS, but I encounter the error described as the title:
==========================================================
relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
==========================================================
I just checked the forum, and found many people have asked the same problem. Have we got one solution to the problem?
At the same time, I found Red Hat 9 does NOT occur in the document "Oracle Express Installation Guide 10g Release 2 (10.2) for Linux" (http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm)
My question is whether Oracle Express 10.2 can NOT be installed on RH9 or not? Does any expert give us one clear answer? If not, we shall not try it on RH9, and we can install it on Fedora Core4 or SESE SLES-9
Message was edited by:
user545243

My question is whether Oracle Express 10.2 can NOT be
installed on RH9 or not? Does any expert give us one
clear answer? If not, we shall not try it on RH9, and
we can install it on Fedora Core4 or SESE SLES-9Oracle CAN be installed on RH9.
However, if you try to mount a modern engine in an ancient Model-T ford car, you must be prepared to make some adjustments.
Same here ... RH9 was released several years before Oracle Database 10.2 and many, many things have been changed in Linux. Oracle assumes that the Linux you are using has a specific set of libraries (glibc being the most important) available at a specific version - they were not available with the same API in RH9 days so you would need to make those libraries available yourself without interfering with other operations of RH9.
The same holds true for other combinations of Linux distro and Oracle database distro. However, some very sharp people have installed using some of those combinations and have published those installation cookbooks - Werner Puschitz at http://www.puschitz.com and Ivan Kartik at http://ivan.kartik.sk/ are the most notable.
I'd highly recommend you consider getting a newer version, and possibly staying very close to a version that Oracle used, to keep the opportunities for troubleshooting to a minimum.

Similar Messages

Not a "problem", but Express n doesn't seem to go "n" in Airport Utility?

Sorry if this has been asked many times before, but I have a MBP, MB, iMac all showing up in in Airport Utility as connecting as "b/g/n" to the Airport Extreme (10/100 n version), but my Express n only shows up as connecting as "b/g".
As I said in the subject line, it's not causing me any problem, in that I only use the AX to stream iTunes to the bedroom, which it'll do just fine from either macbook or the iMac...just wondering if anyone had any ideas why the AX doesn't also show up as "b/g/n" as well? (The Express is also closest to the AE)
The only other thing in the house that shows up as "b/g" is my touch...
Inquiring minds and all that....thanks in advance, Shel

In order to stream iTunes to your AX, the computer must communicate with the base station which in turn communicates with the AX. This "back and forth" probably involves a lot more distance than if the computer were only communicating directly to the main router.
A b/g/n compatible signal will drop down to g after some distance and this may explain what you are seeing, especially if there are several walls to penetrate with the signal.
If you want to pursue this theory, temporarily move your AX close the main router and plug in a pair of headphones to simulate stereo speakers. Move your laptop close to the main router as well. Then check again to see what reading you get on the AX. Then move the laptop and AX further away and test again.
Please post back on your findings.

VERSION 0 NOT DEFINED

Dear friends
VERSION 0 NOT DEFINED ERROR
I am working on CC 4000. When I save sales order, system give 0 version not defined problem.
I did:
SPRP-IMG-Controlling-Organization-Maintain version-select 0 Version and click on Setting for Fiscal year then entered the Controlling Area.
Message display Controlling Area 300 does not exist. But I checked in IMG in FI it is there.
Then I did:
SPRP-IMG-Controlling-Organization-Maintain Controlling Area.
Copy 2200 Controlling Area to 3000. Then repeated the same steps.
SPRP-IMG-Controlling-Organization-Maintain version-select 0 Version and click on Setting for Fiscal year then entered the Controlling Area.
Marked the check box in 20007-Integrated Planning and Copy Allowed box then save.
After when I save sales order system still display the same error version 0 is not defined
But when I changed the system date to October 2002 there is no version 0 error.
Can any one give me solution where I am doing mistake or what the exact problem is
Thanks
Raj

Hi,
Go to SPRO-IMG-Controlling-General Controlling-Organisation-Maintain Versions
Select 0
Go To Setting for each Fiscal year on the left side ,
Put your Controlling Area and Version 0 and click Tick
Then select year 2007 and tick copying allowed and save.
Regards
Adarsh

GLIBC_2.0 not defined in file libc.so.6

I am attempting to install the patch 11I.ATG.PF.H Detla 7, got errors at the end with 7 reports not compiling successfully. I went to recompile one report and got the following error message
Error Message:
/finora/product/10222/8.0.6/bin/rwcon60: relocation error: /finora/product/10222/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Some articles state that LD_ASSUME_KERNEL needs to be set which is untrue for Redhat Linux 5.5. In fact things break if this is set in RHEL5.5.
Not sure why this is not working.....any one else have issues with this?

I am attempting to install the patch 11I.ATG.PF.H Detla 7, got errors at the end with 7 reports not compiling successfully. I went to recompile one report and got the following error message
Error Message:
/finora/product/10222/8.0.6/bin/rwcon60: relocation error: /finora/product/10222/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time referencePlease see these docs.
ar60runb Relocation Error 'Version Glibc_2.0 Not Defined In File libc.so.6' When Running Concurrent Requests [ID 284535.1]
Concurrent Requests Getting Error: ar60run: Relocation Error [ID 389698.1]
Running Concurren Request Causes ar60run: relocation error libjava.so: symbol__libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference [ID 404500.1]
Concurrent Requests Produce Zero Byte Output Files [ID 415196.1]
Standard Concurrent Requests Fail After Fresh Install or Clone on Linux [ID 264951.1]
rwcon60 Fails With 'Symbol __libc_wait, Version Glibc_2.0 Not Defined' Error Generating Reports [ID 371344.1]
Concurrent Manager Jobs Fail After Reinstallation of the Operating System [ID 464960.1]
> Some articles state that LD_ASSUME_KERNEL needs to be set which is untrue for Redhat Linux 5.5. In fact things break if this is set in RHEL5.5.
Not sure why this is not working.....any one else have issues with this?Do not set LD_ASSUME_KERNEL on OEL5/RHEL5 -- What should the value of LD_ASSUME_KERNEL be set to for Linux? [ID 377217.1]
Thanks,
Hussein

When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?

When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?
-Vinayak

Disabling Samsung Caster add-on solved this issue for me.

Problems with GROUP BY - not a GROUP BY expression

Hello,
I am fighting little bit with GROUP BY expression.
After some tests I am able to reduce the problem to following...
When can I use column numbers in GROUP BY expression?
Consider this situation:
CREATE TABLE EMP4 (
NAME VARCHAR2(10)
COMMIT;
INSERT INTO EMP4 VALUES('Tamara');
INSERT INTO EMP4 VALUES('John');
INSERT INTO EMP4 VALUES('Joseph');
COMMIT;
SELECT NAME, COUNT(*)
FROM EMP4
GROUP BY 1;
00979. 00000 - "not a GROUP BY expression"
-- This is working
SELECT NAME, COUNT(*)
FROM EMP4
GROUP BY NAME;Why is the GROUP BY 1 not workig?
I am using the GROUP BY 1 because in real query there is some PL/SQL function which somehow modifies the column NAME, so I can't use the column name
SELECT TEST_PACKAGE.AppendSomeCharacter(NAME), COUNT(*)
FROM EMP4
GROUP BY 1;Of course I can nest the query and move the COUNT and GROUP BY to outer query or maybe something else, but I was just curious why is the GROUP BY not working...
Also in real query, there are 3 columns in the GROUP BY expression, so I have there GROUP BY 1, 2, 3
Thanks for help

hai
try the following
CREATE TABLE TBL(ID NUMBER,VAL VARCHAR(20));
INSERT INTO TBL VALUES(1,'Z');
INSERT INTO TBL VALUES(2,'X');
INSERT INTO TBL VALUES(1,'Z');
INSERT INTO TBL VALUES(2,'X');
INSERT INTO TBL VALUES(3,'A');
INSERT INTO TBL VALUES(4,'H');
INSERT INTO TBL VALUES(5,'B');
INSERT INTO TBL VALUES(6,'C');
INSERT INTO TBL VALUES(7,'T');
INSERT INTO TBL VALUES(3,'A');
INSERT INTO TBL VALUES(4,'H');
INSERT INTO TBL VALUES(5,'B');
INSERT INTO TBL VALUES(6,'C');
INSERT INTO TBL VALUES(7,'T');
CREATE TYPE SAMPLETYPE AS OBJECT ( ID NUMBER, NAME
VARCHAR2(25) ) ;
CREATE TYPE SAMPETBLTYPE AS TABLE OF SAMPLETYPE;
CREATE OR REPLACE FUNCTION SAMPLEFUNC
p_colname varchar2
)return SAMPETBLTYPE pipelined as
ret_val SAMPLETYPE;
TYPE cursor_ref IS REF CURSOR;
fcur cursor_ref;
di TBL%ROWTYPE;
sqlstr varchar2(1000);
colname varchar(30):=p_colname;
begin
sqlstr:='SELECT * FROM TBL ORDER BY '|| colname ;
DBMS_OUTPUT.PUT_LINE(sqlstr);
open fcur FOR sqlstr;
loop
FETCH fcur INTO di;
EXIT WHEN fcur%NOTFOUND;
ret_val:=SAMPLETYPE(di.ID,di.VAL);
PIPE ROW(ret_val);
end loop;
close fcur;
return;
end;
select * from table(SAMPLEFUNC('ID'));
select * from table(SAMPLEFUNC('VAL'));

Version GLIBC_2.0 not defined in file libc.so.6

hey all
am trying to install database 9i on readhat 5
installation is done but DBCA NETCA are giving error
/u01/oracle9/jre/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
soo how can i solve that please???
i tryed the LD_ASSUME_KERNEL and didnt work also the patch compat-libcwait is installed and is installed and the patch 3006854 is also installed
what can i do????

i tryed the LD_ASSUME_KERNEL Is still your LD_ASSUME_KERNEL set?
Recommended Settings for Installing Oracle Products
O/S
RHEL5, OEL5, SLES10
LD_ASSUME_KERNEL setting
Should not be set
Additionally you can review: Oracle Metalink Document: What should the value of LD_ASSUME_KERNEL be set to for Linux?: Doc ID: Note:377217.1
Adith

Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. Does anyone know what the problem is?

I am running a 7 year old MacBook Pro 15. Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. I did not have this problem with Mavericks OSX. Does anyone know what the problem is and is there a fix?

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

EWA Alert 'rating not defined' and 'download problem' (last week it's fine)

Hi Friends,
Please help me with this Alert.
We have a weekly schedule of EWA report. Lat week the report was fine (green).
This week it's been grayed out. the erro is Rating not defined and download problem.
I have run the EWA report and it generated well.
As per the EWA aler recomendation, i have run the sysprep check (sdcc) in target system. as per the report ihave checked the patches, they seems to be ok.However till last week the report was fine(Green).
I have checked the RFC connections etc.
Please check the following error message and help me soon. Since this is a production system.
Regards
srini

hi srini,
r there any upgrades of patches as now i am experiencing the same problem to my qty and dev servers where i have scheduled ewa reps.
it says dwnld problem... but i assume the recent cvhanges to our servers patch levels has some thing to do with this..as that is the only changewe had perfromed...i would keep u informed once i check back to this issue.
let me know if u find any,
Br,
Sri
Award points for helpful answwers

Problem 'Comments Share is not defined'

Hello,
I've just published my website and when I go on it (with Safari or Firefox) there is this message in every 'multimedia' page : Reference Error - Comments Share is not defined.
I did not select the 'comments' functions in the inspector.
So, I'm a bit stuck. If someone could help, thanks a lot.
Problem can be seen at http://www.oroland.eu on page 'proximus' for example.
Message was edited by: oroland

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

HWC Problems Android Device ERROR : Resources not defined

Hello, I got some problems with the Hybrid apps on android device.
I'm using an android emulator and in an android device.
My apps on the emulators are ok, but when i open my app in android devices i get the error "Resources not defined" in a popup.
If when generate the app's check Optimize java script, the error not appears but it's like the Jquery framework it's not working.
The app version is the same but the android version it's different.
Are any problems with the HWC and Android 4.4.2 version?
Android version on emulator 4.2.2
Android version on device 4.4.2
Thanks
Some info maybe helps
SMP server 2.3 SP3
Relay Server 16

Hi Viru p, The version of HWC is 2.3.3.6954, it's the same in the emulator and in the device.
The emulator it's the apk came with the SMP SDK 2.3, and the device it's installed from the play store.
Maybe the problem it's in the SDK
SAP Mobile WorkSpace Product
Version: 2.3 SP03
Build id: 201309221318
SAP Mobile WorkSpace - Mobile Business Object Development Documentation
Version: 2.3.3.20130922001053
Build id: 20130922001053
SAP Mobile WorkSpace - Hybrid App Package Development Documentation
Version: 2.3.3.20130922001053
Build id: 20130922001053
SAP Mobile WorkSpace - Eclipse edition
Version: 2.3.3
Build id: 201309221318

Problem Running ADF page in Tomcat 6 (AdfPage is not defined error)

I'm using JDEV 11.1.1.5
Tomcat 6.0.24
I have the JSPX page below deployed on Tomcat.
At runtime I get an error: AdfPage is not defined
On this line of code:
var passwordTextField = AdfPage.PAGE.findComponentByAbsoluteId('password');
Any suggestion on why it does not recognize AdfPage in the javascript function?
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:trh="http://myfaces.apache.org/trinidad/html">
<c:set var="bundle"
         value="#{adfBundle['oracle.apps.grc.ui.landing.GRCLandingPFBundle']}"/>
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="loginPage">
        <af:group>
        <af:resource type="javascript" source="/oracle.apps.grc.ui.cryptoclient.CryptoClient.nocache.js"/>
        <af:resource type="javascript">
            function login(event) {
                try {
                    var grcCrypto = new window.grc.Crypto();
                    var passwordTextField = AdfPage.PAGE.findComponentByAbsoluteId('password');
                    passwordTextField.setValue(grcCrypto.encrypt(passwordTextField.getValue()));
                    var submitLoginButton = AdfPage.PAGE.findComponentByAbsoluteId('submit_login');
              AdfActionEvent.queue(submitLoginButton, submitLoginButton.getPartialSubmit());
                    event.cancel();
                catch (e) {
                    alert(e.message);
        </af:resource>
        </af:group>

Hi.
as Raphael says, check your libraries.
I think that adfpage is in adf-richclient-api-11.jar, check if this library is in your %CATALINA_HOME%/lib folder.
Anyway I will inform you that Tomcat is not a certificate server,http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html#Application_Servers

Extraction Problem - DataSource is not defined in the source system

Hi,
I am loading transaction data into sales cubes, while loading in process chain it shows "No Data"
so when i go in rsa3 extration for checking availibilty of data.
The following message shows,
DataSource 2LIS_12_VCHDR is not defined in the source system.
In LBWE first it was shown Inactive then i make it active.
So, what is the procedure to defined this data source to the source system.
Thanks & Reagards,
SD.

Hi All,
Thanks for ur reply.
But i can not found the datasource in RSA5, can anyone explain how to find the datasource in RSA5?
Datasource name : 2LIS_12_VCHDR , Cube Name : 0SD_C03
and how to activate in RSA5 ? & after activation how can migrate the same datasource in r3 side by replication?
Also the procedure to fill up the setup tables and then do the loading from r3side by thorugh infopackage...
Thanks & Regards,
SD

Why would I get ReferenceError #1065: "Variable title is not defined."

Well of course it's not defined. It's a dynamic class, and strict mode compilation is turned off so that I don't have to declare the property to compile it.
I've created a library item named "Page" with a single TextField instance named "title".
Page's class is defined in an ActionScript file, and it's assigned to the library item in export for ActionScript.
Page's ActionScript file defines the class as a "dynamic" class, so I should not be getting this runtime error. I turned off strict mode compiling, since it seems to be designed to check the presense of property definitions at compile time for dynamic classes like MovieClip.
public dynamic class Page extends MovieClip
    public function Page()
        super();
        var text:String = title.text; //title can be moused over in the debugger here and shows the correct value, but the flash player throws a runtime error when it tries to access it, but it shouldn't because this is a dynamic class.
So why am I getting a runtime error for the field "title". It makes no sense, because if I step to that line in the FlashDevelop debugger and hold the mouse over "title", it shows that it is in fact the instance of the TextField that I'm trying to access. Yet the player throws an error when I actually try to access it.
Is it a problem or limitation with the access style (i.e. would it work fine if I accessed it as "this.title" or "this["title"]"?

Nevermind. This was apparently a browser caching issue.   The Page base class is defined in the main interface swf, and is externally referenced through its swc in an external "lesson" file that declare a subclass of Page. It was this custom subclass of Page which was throwing the error (basically the same as the simplified example I wrote for my post, where it simply tried to access "title" as a dynamic property of the Page). What happened is the browser was caching an old version of the lesson file with the old definition of the class that was not declared as dynamic. I had received the error before, then updated the class, then I was surprised to see the error persist. It suddenly dawned on me that the browser was probably caching the old version, so I cleared the cache and it seems to work fine now.
Actually, it is a problem after all. I forgot I had updated it to use "this.title" syntax on the page I tested after clearing the cache, but the other pages that try to access title directly as "title" still throw the error. So it seems to be some sort of quirk in how flash accesses properties of a dynamic class. If you try to access them direclty, it must do so in a way that requires the property to be defined, but if you access it via "this.title" or this["title"], the it seems to resolve the property value without throwing the error.
This sucks. I was really trying to not have to write "this." for every property. The entire display list is dynamically generated from some custom XML that allows me to call constructors and set complex type-safe properties, and during construction it was copying each item into a Dictionary by name. This Dictionary was then assigned to the page class as "items", so I was accessing each display object as "item.name". Then I got the brilliant idea of just making Page and its subclasses "dynamic" so that I could just add the DIctionary values on the Page instance itself. I thought I would be able to access the dyamic properties just by their name such as "title", but lo and behold, Flash strikes again, and I have to use dot notation anyway. What do you all think? Any solutions?

Inutilização de NFe: Log de erro Message type 8 is not defined

Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela Machado

Verifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM

"GLIBC_2.3.3 not defined" problem when10g express installation in Red Hat9

Similar Messages

Maybe you are looking for