Glossary Not Appearing

I have RH7 (all lastest patches). Creating Microsoft HTML Help. Using W7, 64Bit
When I create and view the Help, I see the glossary. When I run the CHM file directory, I see the glossary tab, but there are no entries.
All other tabs seems to be OK. I have deleted the GLO file, recreated a new glossary, and just typed in test names. Same results.
Any ideas?
Shawn

Hi there
In addition to Leon's fine advice, I think I'd take it a step further.
In addition to the Glossary, define at least a single browse sequence and ensure the window definition has enabled the Browse Sequences.
Here's why I'm suggesting this. The HHActiveX.dll file is what governs both the Glossary Tab behavior as well as the Browse Sequence bar that gets added into the CHM window. Many years ago when I first became involved with RoboHelp and learned about the HHActiveX.dll file we would see that when it wasn't properly registered on an end user's PC, one of the symptoms would be that the Glossary Tab would appear, but there would be the characteristic blank area on the tab.
So if you are expecting to see the Glossary populate and you are wondering why it isn't, it's most likely the direct result of the HHActiveX.dll not working properly. And if you have a Browse Sequence to boot, that will tend to confirm my theory.
So you can klick and fight and scream at the issue all day/week/month/year long, but my gut says that until Adobe addresses the underlying issue with the dll, you aren't going to see the entries populate.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Similar Messages

  • Glossary Not Appearing in Windows 7 64 Bit

    I have RH7 installed on XP. All is OK when I view the CHM file in XP.  When I view the CHM file in W7 64 Bit, the glossary does not appear.
    Do I need to install RH7 under W7 64 bit to get the glossary to work under W7 64 bit?  If that is true, one issue is I have Office 2010 which RH7 doesn't support and I'm not in a position to upgrade to RH10.
    Is there any way to keep RH7 installed on XP and generate the CHM file that shows the glossary under W7 64 bit?
    Thank you.
    Shawn

    IIRC you’ll have to register the 64 bit dll for CHM viewing – search the forums; this issue has come up before

  • Glossary does not appear in merged project

    Hi,
    I am using RHX5 to produce help in HTML chm format. I have 14
    separate projects which are merged into a master project, due to a
    bug in RH in which the table of contents does not display correctly
    I use HTML Help Workshop to compile the master project.
    One of the 14 projects has glossary entries and so far I have
    been unable to make the glossary entries appear in the master
    project when it is compiled in HTML Help Workshop.
    I have registered the hhactivex.dll.
    I checked the glossary checkbox in the windows setup in both
    the individual project and the master and I added a glossary entry
    to the master project.
    When I compile the project using RH then all the glossary
    entries appear but the table of contents is messed up.
    When I compile the project using HTML Help Workshop then only
    the single glossary entry from the master project appears.
    Anyone have any idea how to solve this problem?
    TIA
    Morven

    Hi Morven. When you say your TOC is messed up are you
    referring to the problem where the merged projects appear as a book
    within a book? If so,
    click
    here for a method to get around it and use RH to compile your
    output. If this is not the problem to which you refer, I'll crawl
    back under my stone.

  • The index link does not appear in italic. What do I do wrong?

    The primary definition of the glossary term does appear in bold, but the secondary (index link) term does not appear in italic.  I also can not format the word in another color or typeface. Any ideas on how to fix this?

    Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

  • Some emails, that are on my server, do not appear in my thunderbird listing (or do appear one day and not thereafter), why?

    I seem to be loosing some emails. They may (or may not) appear once in the thunderbird listing, but thereafter they are gone. These, typically are from the same source that have previously been received (ie follow up emails) but, once gone from the listing, are not grouped with the previous email or put in the TRASH file.

    There are several possible reasons that messages seem to 'disappear'.
    There are two types of email accounts: IMAP and POP. See https://support.mozilla.org/en-US/kb/glossary-terms-including-types-accounts
    If you have a POP account and are accessing the mail on more than one computer or smartphone, whichever device reads (downloads) the message first will have it locally, but it will no longer be listed or available on the other devices.
    If you have an IMAP account, the message stays on the server, but if one device (user) moves or deletes the message, it will affect the view on all devices. So, for example, if you are using your smartphone and take some action on an email, when you get back to your computer, it will reflect that same action (but you might not have realized what caused it).
    Another, less likely, reason for messages not to show up in your inbox is having the preference set to show only unread messages. Then once you read them they seem to disappear.

  • I am trying to set up Sharing amongst several computers on my home network.  I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up).  There is no explanation why.

    I have been trying to set up Sharing between two computers on my network. I did this once and it worked.  However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer).  There is no explanation as to why not.  Is this a configuration problem, a network problem or what?   Can it be fixed?  I have tried turning sharing off and back on on both computers but to no avail.  What am I missing?  Thanks for any help you can provide.

    Hey innerev2003,
    Thanks for the question, and welcome to Apple Support Communities.
    If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
    If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
    iTunes 11 for Windows: Manage your iTunes Store account
    http://support.apple.com/kb/PH12507
    Thanks,
    Matt M.

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • External Hard Drive does not appear in finder

    We purchased a 1 TB G Drive Q from the Apple Store. It is connected to my wife's iMac running the most current update of Leopard by 800 firewire and appears on her desktop and works flawlessly with time machine. I am connected to the same drive intermittently with my MacBookPro also running the most current update of Leopard. i connect with 400 firewire. Initially the drive would not appear in the finder. for the initial backup, i turned the hard drive off and on and then it would appear and i did the backup but now when i connect to the 400 firewire port, it still doesn't appear in the finder. i would much prefer not to need to turn my back up drive off and on each time i want to use time machine. i should also mention that when i connect any of my garmin training devices or my power meter by USB it is recognized very quickly as a device in finder. any ideas? i understand this may be one of the problems fixed with SnowLeopard. thanks.

    I am not sure what you are attempting to do. I assume that you are not trying to connect two computers to the same external drive at the same time. That will definitely be problematic. In order to effectively use Time Machine with two Macs, you should partition the drive into two partitions. Also make sure that the drive is using a GUID partition scheme.
    bd

  • BPM Application Link does not appear in BPM Workspace (11.1.1.7)

    I spent huge amount of time to reveal why does that happens.
    All that follows further is valid for BPM Suite 11.1.1.7.
    The scenario.
    You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
    But the application link did not appear in BPM Workspace.
    Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
    At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
    The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
    Else the Appication Link will not appear.
    One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
    The second find is a bug (is think so).
    If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
    If you look to organization.xml you will see something like this:
            <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
                <ns5:name>StartTask.InitRole1</ns5:name>
                <ns1:processRole id="InitRole" name="InitRole1"/>
            </ns1:applicationRole>
    The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
    When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
    After that "applicationRole id" != "applicationRole name" and the Link does not appear.
    How to fix?
    Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
    That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
    Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
    In that case the associated swimlane will have the same name as the "applicationRole id".
    Hope this helps somebody
    Oleg

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • Tab Strips are not appearing correctly

    Hi all,
    We are using SAP Portal 7.3 and we are using Custom theme. The tabstrips are not appearing properly (half broken).
    I have tried changing the properties "Background color of selected tab" , "Background color of non-selected tab" and others in theme editor but this is not solving my issue.
    Any help would be highly appreciated.
    Thanks
    Harshmeet

    Hey,
    Thanks for the reply. PFA the screen shot
    This is how it is appearing, somewhat broken and some space below the tabs.
    Thanks
    Harshmeet

  • File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

    In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all.  I have reset the preferences numerous times and am good to go until I shut down my computer.  When I reboot they are gone again.  I have a Mac with OS 10.10.2 (Yosemite) and CC. 

    Mardi Carter wrote:
    I shut down using "Shut Down" under the Apple menu.....always…
    Well, that's fine for the OS, but sometimes not so great for Photoshop.  Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
    Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
    You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
    Forget about "it had never happened before", Yosemite is a work in progress.  Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5.  That has proven to be the nature of the beast.

  • Crystal Reports - Charts do not appear on reports in some cases

    We have a few reports that include charts on them (created with Crystal 2008 Designer).  These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
    Wait...  This has a curve ball...
    The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear! 
    I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
    Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
    Thanks for any help - much appreciated.

    Nope...  Not video corruption...  We finally figured it out...
    Its the 12_0 runtime.  Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
    Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
    Problem solved.
    Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

    Hi All,
    I've deployed a portal service and a KM scheduler task in the same DC but cannot see the scheduler task listed under System Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks.
    The service works correctly and performs its periodic processing once on initialisation of the service, and I can see the resulting log statements to make sure it has worked.
    Both the service and the scheduler task are packed inside the same DC, which builds and deploys without any errors.
    There are no errors in the log regarding the deployment of the DC, or the scheduler task.
    There is a log statement about registering the classloader for the DC, which I assume is the statement in the IRFServiceWrapper init() that goes:
    CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
    But I still dont see the task listed in Global Services -> Scheduler Tasks.
    Does anyone know what might be causing this or how to diagnose the problem further?
    Cheers,
    Steve

    Hi Srini,
    No it doesn't it just has the run method which is generated automatically.
    I have created a local Portal Application project, which is not in a DC, and this also does not have a default constructor ether but appears in the Scheduler Tasks list as soon as it is deployed.
    I also tried to create a Portal Applicaiton DC and Portal Applicaiton (Packaged as SDA) DC and despite the scheduler task being the same, both the DC tasks do not appear in the Scheduler Tasks.
    The only one I can get to work is the local Portal Application project. This is no use as we cant store this in DTR (unless someone can explain how to do this???).
    The Portal Application project packages up the RF Framework JARS inside its PAR file, but the DC and SDA projects dont, so I tried including them via an Assembly Public Part to an External Library DC, which does include the JARs in the deployment files but they still dont appear in the Scheduler Tasks.
    Has anyone out there got a working Scheduler Task in a Portal Application DC?
    Cheers,
    Steve

  • Idoc not appearing in Xi system

    Hi experts,
    I have developed a idoc to file scnario but the idoc trgerred in the ECC system i snot comming to XI. I have done all the setting IDX1 and IDX2 and partner profile settings in ECC. the idoc status is 03 in ECC which says the idoc is sent to port successfully, but it is not appearing in SXMB_MONI in XI.  It used to work earlier. Is there any batch job or peogram does this transfer. what do i check?/
    thanks
    sankar

    Hi,
    Add the Logical System of SAP R/3 in Integration Directory as shown in the Blog and check Now
    The specified item was not found.
    And also check these Disscussions
    No service for system in Integration Directory
    No Service for System XYZ,Client 300 in Integartion Directory
    Regards
    Seshagiri
    Edited by: N V Seshagiri on Aug 7, 2008 8:16 AM

Maybe you are looking for