GMT compatibility and the E71 in Israel

I am using the E71 in Isreal, now it is winter time GMT+2
but when I receive an invitation for a meeting using my Mail For Exchange application and confirm it from the Nokia, it is inserted to the calender 1 hour earlier !
For instance, if I received an invittion for a meeting at 10:00 it ends up in my calendar at 09:00 !
However, if I open the invitation and confirm it from my outlook - than sync the Nokia there is NO problem !
The Exchange server is also GMT+2 Jerusalem time.
Local support in Israel (Orange) said to try and set the time zone to another country - but the problem is NOT solved.
I had a similar problem during Summer time (we changed October 5th) when it was GMT+3, and I solved it at the time by setting the time of the phone to Nairobi - Kenya time which was also GMT+3.
Any help will be highly appreciated.
Hanani
using Nokia since ages most recent were the 9300, N95 the E71, and since July 15 - a proud owner of the N97 - later switched to the N97 White

Thanks for the quick response, however, it does NOT help.
It solves only part of the problem, if I for instance insert a meeting in my Nokia, it will be done at the same hour at the exchange, however, when I open and confirm a meeting in the Nokia, a meeting request sent by another person - it will be inserted one hopur eearlier into the exchange.
As I wrote before, if I confirm the meeting from the Oulook first, it wil be snced properly into the Nokia.
By the way, my MFE version is 2.05 and I see there is a newer version 2.7 Is this something I should consider updateding / upgrading ?
Thanks,
Hanani
using Nokia since ages most recent were the 9300, N95 the E71, and since July 15 - a proud owner of the N97 - later switched to the N97 White

Similar Messages

  • Exchange Server and the E71 - frustrated trying to...

    If there is anyone in the Calgary area that can help me get my E71 connected to our Microsoft Exchange Server your help would be greatly appreciated. At this point I wish I had purchased a Crackberry! This setup is simply NOT user friendly or intuitive. After a week of trying to get connected, deleting software, downloading software upgrades, running endless setup routines, I have reached the end! Friends who own Blackberrys connected within minutes! HELP!! 
    Brent Cisco

    After spending endless hours achieving nothing but frustration I have given up on trying to access my email on our Microsoft Exchange Server using Mail for Exchange I have deleted the application from my Nokia E71 phone and given up completely trying to make this work. I have used the wizard spending endless totally unproductive hours entering in the settings required over and over again, I've installed the security certificate, I've had my tech guy make the correct settings on our server, I've deleted and reinstalled Mail for Exchange and deleted and reentered my profile information: email address, domain name, user name, password, exchange server... some times in the same session I've entered this information countless times. I have asked it to permenently accept the certificate more times than I can count. I would also like to add that my tech guy said he couldn't figure it out and he's a Microsoft Certified Professional. I would love to find another E71 owner in Calgary who has had success connecting to his company's Exchange Server and get his or her help. Everyone I know who has a Blackberry or an iPhone said they connected in minutes. I'm taking this phone back to Rogers, I'll pay out the contract and switch the the phone everyone said I should have purchased in the first place... the iPhone. I'm more than disappointed!
    Brent Cisco

  • Plays-For-Sure compatibility and the Jukebox Z

    I signed up for the new Yahoo service today and I've got an original Zen from a little over two years ago. Will Creative release firmware to support Plays-For-Sure?

    Sounds to me like we're mostly out of luck. I emailed support about my 5 mo. old zen xtra and asked when they would support "play for sure" so I could use Yahoo's new service and this is the reply I got; "Dear Gary, Thank you for contacting Creative Technical Support. We have not heard of a release date for play for sure firmware for the Zen Xtra All I can suggest is keep watching our website for any updates I have not heard if there is even going to be any released We have a beta version for the Play for sure for our Zen Micro once this is no longer a beta version they may release others. I am very sorry for the inconvenience caused by this. If you need further assistance, do get back to us and we will be glad to help you. For faster service please reply with previous correspondence when replying to this email. Best Regards,
    <name removed>Technical Support Creative Labs Americas "Get Creative" " Is there anyone else besides me who thinks this stinks? It's not like it's outdated hardware. Let's get on them about this - if we want to be able to use these kinds of services it seems that we'll have to pressure them.
    <EM>Mod note: please remove the name of the advisor before posting the e-mails</EM>
    Message Edited by Catherina-CL on 05-3-2005 03:23 PM

  • Change GMT time and 12 hours format in the Callback Properties dialog box

    Hello! There are CAD 7.6.3 for UCCE. In the Callback Properties dialog box for personal CallBack displays the Customer's Current Time in GMT 0 and the data format of 12 hours.
    How to display in this window, the time is GMT +3 and change time in 24-hours format?

    Hi,
    Please check your local time format settings by the following steps:
    1. Click the Time in the right bottom corner taskbar.
    2. Click Change date and time settings.
    3. In Date and Time window, click Change data and time.
    4. In Date and Time Settings window, click Change calendar settings.
    5. In Customize Format window, switch to Time tab.
    6. Change the Short time format as H:mm instead of h:mm tt, set the Long time as H:mm:ss.
    7. Click OK to save the setting to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for comparability and the Welcome page opening every time I start the browser.

    Windows 7 64 bit
    I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for compatability and the Welcome page opening every time I start the browser. I continue to have to revert to version 9 to resolve this issue.

    Sorry to be a while getting back! Tried all of that with no sucess so this AM, bit the bullet and deleted the FF folder from programs and downloaded and installed FF 10.01. Still was plagued with the same problem. Went into the appdata folder and there were two sessionstore.js files. Deleted them both, restarted the browser and no compatibility check for add-ons was done at start up and the extra tab for Welcome to FF was no longer opening Everything seems to be working as it should and I did not loose any of my settings.. Thank you for trying to help and I hope my solution helps anyone else who might experience this in the future. Here's hoping the next update goes smoother!

  • Why do I get a class conflict between the Prepare SQL.vi and the Get Column Name.vi with the SQL Toolkit compatibility vis from the Database Connectivity Toolkit?

    I have done extensive programming with the SQL Toolkit with LabVIEW versions through 6.1. My customer now wants to upgrade to Windows 7, so I am trying to upgrade to LabVIEW 2009 (my latest purchased version) using the Database Connectivity Toolkit, and the SQL Toolkit Compatibility vis. Everything seemed to be going okay with the higher level SQL operations, but I ran into trouble with the Get Column Name.vi. 
    The pictures below show the problem. The original SQL Toolkit connected the Prepare SQL.vi with the Get Column Name.vi with a cluster of two references, one for connection, and one for sql. The new compatibility vis have a class conflict in the wire because the Prepare SQL.vi contains a cluster with connection, and command references, but the Get Column Name.vi expects a cluster with connection and recordset references. 
    How do I resolve this conflict?
    Thank You.
    Dan

    I've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
    I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
    Try to take over the world!

  • I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

    I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

    You are welcome, ameronweb.
    To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
    If upgrading to 10.6.8 or higher is an option, you could use CS6.

  • Report Scheduling. How to syncronize the GMT and the local server timezones

    Hi everybody, I need to schedule reports using the Schedule tab on BIP, but I didn't still understand how the syncronization between my server's timezone and the GMT timezone works.....
    I noticed that when I open the Report Schedules initial page, this is refreshed using the GMT timezone as follows:
    Page Refreshed   Monday, July 26, 2010 7:53 AM GMT
    Actually I'm located in Athens (GMT+3)
    I noticed that if I want to Run once a report, ONLY the GMT is took in consideration.
    For example, I want to run a report at 11.30 (Athens timeone) where the time conditions are the following:
    BIP time (GMT timezone): 08.00 AM GMT
    server timezone: 11.00 AM (Athens time)
    So, if I want to run a report at 11.30 AM (Athens time), I have to write in BIP (Run once) 08.30 AM, instead of 11.30, otherwise if I put 11.30, the report runs 3 hours and 30 minutes later instead of only 30 minutes !!! This is very frustrating....because it means that everytime I need to remember that there is a difference of 3 hours and if I want effectively....
    I also set the Report Formatting Time Zone = GMT+03:00 to fill the gap between the GMT's timezone and Athens's timezone but it didn't work....
    I found that the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> is set into the tmpl.xsl; I tried to change it (GMT+3 or GMT+03:00), I stop and restart the BIP server....but nothing...the BIP timezone is always GMT (as showed by th Page Refreshed date and time).
    At the end my question is this: is there a way to modify the internal BIP timezone in order to fill the gap between this and the server timezone ?
    In other words, I'd like to see the page refreshed with the server timezone (Athens timezone) and not the GMT timezone, in order to schedule reports thinking directly my local server timezone (and not think always to calculate how many hours is the difference).
    This, I think is a common issue for everybody, but....I didn't find nothing in the forum....
    If somebody found a workaround, every help will be appreciated.
    Thanks
    Alex

    Good Morning Vetsrini,
    I know that the "Report Formatting Time Zone" is used to set the timezone properly INSIDE the report...but my attention now is concentrated on the Scheduling...
    As I mentioned before I'd like to find a way to syncronize the BIP timezone (based on GMT) and my local server timezone (Athens, GMT+2), and this I think it's possiblie only if I can modify the BIP timezone (GMT): instead to have GMT, I'd like to have GMT+2 in order to have the same time in both of systems.
    I already tried to change the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> into the tmpl.xsl, but it didn't work....
    I don't understand how all the others millions of BIP users who don't live in UK can use the scheduler keeping in mind always the gap between their local time and the GMT time set in BIP......
    Do you have another hint or workaround ?
    Thanks for your help
    Alex

  • I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

    I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

    iWeb cannot import published files so you would need rebuild the site.
    Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html
    If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

  • Having trouble charging my iphone 4 keeps saying charging not compatable with the charger i bought from sprint and now it doesn't even pick up the charger that came with the phone i don't understand why? should i bring it in for a repair?

    Having trouble charging my IPhone4 with the charger from apple and the charger i bought from sprint. I plug it into the apple charger and nothing happens. if i plug it into the charger from sprint it says charging not compatable with this accessorie? should i take it in for repair or try a new charger??

    Try a different charger pref an apple one if it stays the same take it in to be checked

  • I have an iMac with 10.4.11 and a Mac Air 10.6.7. Will the Extreme be compatable with the 10.4.11?

    I have an iMac with 10.4.11 and a Mac Air 10.6.7. Will the Extreme be compatable with the 10.4.11?

    10.4.11  Macs will have Kernel Panics when trying to use Dual Band Airport Extreme Base Station.  There are a few forums here dealing with it.  I just purchased an Airport Extreme Base Station and spent two days now figuring out why the old iMac G5 running 10.4.11 (Tiger) was Kernel Panicing.  There is a way that I am testing now that seems to be working.  I will post the link in a minute when I find it. Other solution is to upgrade to 10.5 .
    Here is the post
    Aug 22, 2010 2:09 PM (in response to Acin)
    Greetings... I have just found a resolution to this problem, at lease if you're using one of the newer Dual Band Airport Extreme base stations. This fix was provided by an AppleCare representative named Rebecca, and I am deeply in her debt. To review: MY PROBLEM - After installing a new Dual Band Airport Extreme in July 2010, I began to have frequent kernel panics with my older laptops running Tiger (10.4.11). My newer Intel/Leopard MacBook Pro ran fine with the new base station, but these older Power PC Macs with Tiger just crashed again and again. Pulling the Airport Card was the only fix. I tried every conceivable software and network fix; nothing helped. THE SOLUTION - The AppleCare rep talked me through this, but I'm pretty sure this was the procedure. Please note that I cannot guarantee that I have not forgotten a step! But I am fairly sure this is it. (If an Apple specialist is reading, please check this!) Keep in mind, this will only work if you have a dual-band Airport base station. I performed this on a Mac Pro running OS 10.6.4, with Airport Utility version 5.5.1 and firmware 7.5. 1. Launch Airport Utility.
    2. With the dual-band base station selected, click Manual Setup.
    3. Click the Wireless tab.
    4. Click the "Wireless Network Options" button near the bottom.
    5. Check the box that says "5 GHz Network," then enter a new network name in the Name field. (Your existing network name appears there now. Just delete it and type a new one.)
    6. Click Done. That dialogue will close.
    7. Now click Update. The Airport base station will now take about a minute to reboot. Here's what happens when you perform these steps... The utility changes your existing Airport network to 2.5 Ghz, and then creates a new 5 Ghz network with the new name. (It will apply the same password to both.) You will use the 5 Ghz network, the new name, for any new wireless computers using Leopard or newer OS. You will use the 2.5 Ghz network (bearing the original network name) for the older laptops running Tiger. This fix worked immediately, no problems. The issue is that Tiger does not perform well with 5 Ghz networks, and this causes the kernel panics. I now have two old G4 laptops running Tiger, both using my new Airport base station with the 2.5 Ghz network and running perfectly. At the same time, my new machine is using the 5 Ghz network at the same time. It seems quite stable. Good luck, and I hope this info is useful. 

  • I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

    I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

    What OS?

  • Compatibility between the iPhone 6 and certain vehicles, and the hands free connectivity in those vehicles?

    How can I findout about the compatibility between the iPhone 6 and certain vehicles, and the hands free connectivity in those vehicles?
    I am interested in the iPhone 6 but have several meetings that have to call into for work.  Where can I find out about the compatibility with iPhone 6 and if there are issues I need to be aware of for connecting to hands free option in the car?
    Please point me to the right direction. The dealership was useless in helping me. I figured Verizon can be more helpful.

        ShaM1,
    I understand the importance of the bluetooth compatibility between your new device and your car.  What make and model is your vehicle? 
    Here is the information that Verizon Wireless has on Bluetooth Car Kit compatibility; http://www.verizonwireless.com/support/how-to-use-bluetooth-car-kit-compatibility/.  However, Apple does not have any information listed here.  We can assume that the latest and greatest iPhone 6 has the technology to be compatible with most vehicles.  If you'd like to discover further information I'd suggest contacting Apple directly; 800-275-2273.
    Let us know if you need anything else!
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • SIP setup and the 'sip phone' symbol on E71

    Hey....
    OK SIP users..this question is for you.
    Iam running my E71 and have activated and paid for a SIP account (voiptalk) and the setup went well last week, and I have made a few successful SIP calls from the E71.... good stuff !
    I am calling landline numbers in the UK using SIP (VoipTalk) through FRING... no problems...
    My question is... the little SIP-Phone symbol that was present on the top left of the screen has now disappeared... but I can make SIP calls...
    Erm... why has the symbol gone ?
    What does that symbol mean in reality, as I can continue to make SIP calls...
    Thanks in advance
    Harry

    Okay thats a question more to the phone's behavior rather then SIP settings.
    Looks like your phone keep dropping out symbols.
    Have you tried to reboot your phone lately by swithing it off removing the battery and put it back together after a couple of minutes.
    Sometimes that solves a lot of issues.
    Try it and see if it brings back the symbol.
    Mark me a KUDOS if this has helped...

  • After upgrading to 8.0 the add-on compatability tool runs and the Getting Started web page loads every time the browser starts.

    After upgrading to 8.0 from 7.0.1 every time I start FF I get the add-on compatibility tool to run and the Getting Started web page loads along with my homepage in separate tabs as well. So far I have tried running the installer again, disabling all add-0ns and custom settings and restarting and turning off automatic updates. Nothing worked there. I got the same behavior each time. I don't know what else to try other than a full uninstall and reinstall. Something I'd like to avoid if it's possible because of the time involved. This is the second time I have posted regarding this issue. The first time I didn't get a response. A solution or a possible workaround would be greatly appreciated if anyone knows of any. As a staff member and a global forum moderator for an anti-virus company I understand how hectic things can be at times but some feedback, good or bad, on this issue would be very welcomed! Regards, Ritchie...

    Hi michaell, thanks for the reply. I tried everything in the Preferences are not saved link you provided and nothing worked there. If creating a new profile will delete all my add-ons and custom settings I might as well just do a complete uninstall and reinstall. That actually would be easier. That article told me how to save my bookmarks though so I don't have to loose those which is nice. I don't know if this makes any difference but there is a discrepancy between the preference file in the article which is: prefs.js and what's showing on my PC which is: prefs with no .js suffix. I tried to rename the file to prefs.js and restarted. No luck there either. It just created another prefs file. I guess we've pretty much exhausted all the avenues to try! I'm just going to go ahead and do a reinstall when I get the time. Thanks so much for your help michaell. I do appreciate the effort. Regards, Ritchie...

Maybe you are looking for

  • Error while creating a process chain

    Hello BI Gurus, I have activated the Business Content Scenario in Plant Maintenance for Infocube 0PM_C08(Measurement Results). It provides a datasource -> infocube flow,through DSO with transfer and update rules.(3.X scenario) I have two questions -

  • Custom created field created using Addon is overlapping in BP Master form

    Hi All, I have developed an addon to create some custom field in Business partner master data form. Every thing is working fine but the issue is that when I am maximizing and minimizing the BP form the custom created fields are overlapping with exist

  • How to access the hard drive in my Time Capsule via ethernet, not wireless

    I have a new Netgear 802.11ac router with ethernet ports. I also have an older (4 years old) Time Capsule that I replaced with the new Netgear router. My iPhoto library was recently corrupted (long story there). I don't have a backup except on my Tim

  • Idvd 8 V7 and Idvd 6

    I have a few questions. 1. is Idvd 6HD compatible with idvd 8 (v7) and vice versa? 2. I had a machine rebuilt a a local shop and idvd will not open, says no themes. Any idea where they went and if not in the location how do I get them. I do not have

  • Using an Applet to run another application

    To anyone that can help. Simply, can I have an applet that runs an PC application? More detail: I am relatively new to the Java Development environment, but so far have put together a reasonable intranet web application that takes user input and writ