Gnome often turn back to gdm login screen after I hit the keybord
I am not sure whether there are anybody get same problem as me. Gnome often suddently turn back to GDM login screen after I hit keybord( any keys). The rate I get this problem is 2 times within about 6 hours . This is really bad problem ,while I was writting php codes ,the gnome suddently turn back to GDM caused I lost all codes I wrote!
is there any solution?
http://bbs.archlinux.org/viewtopic.php?id=82308
I have same problem, but sometimes it works perfectly until I reboot my PC O.o
Similar Messages
-
pls help
What is your OS and browser?
Is this thread talking about same problem that you have?
https://discussions.apple.com/thread/5006972 -
After Gnome upgrade GDM login screen always says "Other..." [SOLVED]
After the recent Gnome upgrade GDM login screen started looking strange:
It shows a blue (highlighted?) disabled editbox that says "Other..." which I now must click on to get the usual username/password edit boxes. WTF?
Pressing Enter won't do anything, it wants a mouse click. I find it extremely annoying to click on the stupid thing every time I need to login. I have waited a couple of weeks hoping this would come up in Google searches but it didn't.
Can't do a screenshot of a login prompt.
Seems like the login is supposed to show a list of users plus "Other" thing at the bottom. But I'm not getting the list, just "Other..." box.
Last edited by softtower (2010-10-12 01:13:30)I haven't touched that setting and the list of users is visible for me (in addition to the Other... option).
# sudo -u gdm gconftool-2 --get /apps/gdm/simple-greeter/disable_user_list
false
There, however, is the annoying issue that focus is initially outside the login box. I have to press arrow down before pressing enter to select a user. Perhaps that behavior would make more sense if I had several users on the system (i.e. the first one on the list would not necessarily be me). -
XFCE4 with GDM - Login Screen Format Configuration?
How does one adjust/configure basic things like the size of the GDM login screen in this environment? As it stands, it is much wider than my initial video mode allows, causing the Login button, for instance, to be off the right of the screen. I can still log on using Tab to the button and such, but how does one fix the format problem? Where is the configuration for the GDM login screen kept when using XFCE4 as the desktop manager? All the suggestions so far presume you are using GNOME and not XFCE4. Thanks!
- MichaelI don't know how to tell which xorg video drivers are installed but will happily check if you tell me how to do so.
Adding vga=773 to the linux kernel cmdline (e/edit/f10 in grub) has no effect (no change in symptoms). My xfce4 desktop has an initial resolution of 800x600, but automatically adjusts correctly when I fullscreen the VMware session with Ctrl+Alt-Enter, so I would have to say that xfce4 is performing properly after login. The grub login menu acts as if the screen was perhaps 1024 wide, but it gets clipped to an actual 800x600 graphic window during login.
This is in a VMware Workstation 7.1 virtual machine installed using 'Other Linux 2.6.x kernel 64-bit' which seemed to be the closest match to Arch.
- Michael -
[Solved] -Change the background image of gdm login screen.
When I first installed Arch I found that the default background image of gdm login screen ( or lock screen ) didn't look good with the desktop image that I had, so when I installed I looked for a way to change this. Sadly I could not find any direct and easy way, I looked in forums, I looked in gconf-editor and I could not find any relevant information about it. So I decided to look for the file and change it.
This was not the best option, clearly since now that I installed Gnome 2.30 it replaced the image with the old one and I had to change the file again. Since maybe some other people are having similar problems I thought I could just post the place where gdm is looking for the file, and if somebody has any suggestions about how to change it with a better way, I would welcome it .
After the longest intro to a directory, here it is: /usr/share/pixmaps/backgrounds/gnome/background-default.jpg
Thank you .
Last edited by agomezh (2010-04-11 18:53:09)Not to belabour the point, but after much hair pulling, I stumbled upon the following method, and it works perfectly. It sets the default background (for GDM login, Lock, desktop...etc.) for Gnome to whatever you want--even new users get the new default background on their desktop, although they can obviously change it, this is only the default. The page also shows a method of doing the same as gnome-appearance-properties method with just gconftool-2. I hope this doesn't just cause confusion.
[Note: It still has to be run as root of course. I used sudo.]
http://library.gnome.org/admin/system-a … n#gconf-20
gconftool-2 --direct \
--config-source xml:readwrite:/etc/gconf/gconf.xml.defaults \
--type string \
--set /desktop/gnome/background/picture_filename some_picture_filename.png -
I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.
Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
When I downloaded IOs8.1, it was going well, until it tried to turn back on. My screen went from flashing white with the apple sign to black to a full red screen. It keeps repeating itself and will not turn back on. However, i am able to turn it off, but when i turn it back on it just does the apple sign, black, and red screens again. How can i turn my phone on to work again? Or make the red screen go away.
I had this issue on my iPhone 6. I had to get a new one. There was a hardware error.
-
Stuck at login screen after update froze
Hi everyone, I have a Macbook that is a couple years old and have Leopard on it. Last night, I was prompted to install several updates and then restart my Macbook. I did so and then the updates began to install, but then appeared to stall. I hit the power off button and then turned my Macbook back on again. This brought me to the login screen, but I don't have my Macbook set to require me to login each time I use it. I entered my password and then it went to the blue screen like it was about to bring me to the desktop. But that didn't happen. It brought me back to the login screen, which is where I am still stuck as of this writing. Is there anything I can do? Thanks for your help.
No guarantee this will solve your problem, but you can give it a try:
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-User mode by holding down the command (Apple) key and the 's' key while you press the power switch. You can let go the keys when you see white text on a black background. When this has finished you will see a prompt ending in '#', although there may be other messages. Type
/sbin/fsck -fy
followed by a return, at the prompt and wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
rm Extensions.kextcache
cd /System/Library/Caches
rm -r *
reboot
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If you get error messages saying files do not exist, just ignore them and type reboot.
If the above is unsuccessful then you may be able to reinstall OS X using an Archive and Install which does not erase the hard drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal. Anyone have this issue before? I've only had this for about 3mos. I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.
Hi S,
Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964? -
Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
My Aspire 7750G does not show the login screen after upgrade to Windows 10
I have upgraded to Windows 10 on my 7750G and the update went thru smooth.But when I restart Windows it shows the windows screen with the moving dotted circle,the harddisk led stays on for a while, then starts flickering, and a blank screen is shown!After waiting - about 2 to 3 minutes - it goes directly to the lock screen, no login screen is shown.
joeboemoe,
The lock screen is where you login now, if I am not mistaken. The notebooks we have here boot to a lock screen we have to click to log in, even my PC at home does. If you want to take a look at this article we created, it might be what you are looking for.
I created a password for one of the logins on one of our notebooks and I had the option to choose Never under "If you've been away, when should Windows require you to sign in again?" -
My iphone 5 keeps randomly shutting off and won't turn back on unless I plug it in to the charger
my iphone 5 keeps randomly shutting off and won't turn back on unless I plug it in to the charger
I'm experiencing the same issue. It's one thing to have to re-power up but to not be able to do so without plugging in the charger when the battery is substantially full, is a real drag.
-
Stuck at login screen after Lion install
I downloaded and installed Lion on my late 2008 mbp with the latest updated snow leopard and after the install, I'm stuck on a screen with icons of my users. If I click nothing happens. I tried repairing disk permissions as well as re-installing Lion but nothing has helped. Any ideas?
You might see if this works:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder). -
my battery on my iphone three is growning and it turns off around 80% then in order for it to turn back on i need to put it on the charger , somebody please help me i need to fix this is there anyway ican?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, then take the device to Apple for evaluation.
FYI, Apple will not replace the battery without first doing basic troubleshooting or testing the battery.
Maybe you are looking for
-
Error while saving the documents in Transactions MIRO,VA02, VA01, ects
Hi SAP Gurus, i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions.. The error is * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " * can u please help me out. Regards Kumar m
-
After I recently Upgraded iTunes I can no longer play any movies or songs. It says that "The song ______ can no longer be playe because the original file cannot be found. Would you like to locate it?" I have no clue where to look as I'm not tech
-
Deleting lines from Sales order for which PO exists
HI all, We have a setup where MTO/PTO configurable sales order lines are created in SAP from a different application. In this scenario user did create a couple of PTO lines manually in SAP sales order which generated Purchase requisition and a purcha
-
MIGO authorization available despite removing
Dear All A user id was accidentally given authorization for MIGO transaction. Issue is to remove the same. We removed the user from all roles containing MIGO and assigned the remaining t codes with a new role But still MIGO is available. I checked th
-
Compairing a form submission using cfselect to a db record
Hello; I am writting a small contact form. I want to use cfselect so it will be populated with all the states.I have it working fine, my problem is, when the email is sent from the form, it sends the ID of the state, not the actual state name.I am tr