Going from one flv to another page.

On my web page, I have a presentation video in a flv file. I
want, when the file finishes playing to go directly into another
page. does any one knows how to do it. I've tried placing the flv
file into a movie clip, calling the movie clip on frame one and on
frame 2 using "getUrl" script to call the other page. It doesn't
work. I've tried several other ways but it doesn't work.
Can any one helpme?
Thakns in advance

Use the FLV playback component to play the video. The
component has an onComplete property. Write a listener to handle
the onComplete with a getURL command inside it to load your new web
page.
Check out the LiveDocs here (just substitute the getURL
command for the "next FLV" code):
http://livedocs.macromedia.com/flash/8/main/00003494.html
Hope that helps!

Similar Messages

  • N95 going from one screen to another

    My N95 has started flicking from one screen to another. Is this a programming fault? If I take it to a Nokia shop will it cost me a fortune?

    It sounds like a button is stuck and is making your phone scroll through the menus, and i would think if it is starting with the menu then thats the problem key.
    If the button works, as in when you click it you feel it depress beneath your finger, then there is a possibility that the handset may have got wet and the keypad(underneath the one you see) is corroded and is shorting making the phone think its always being pressed.
    Take it to a Nokia Care Point and get it looked at.
    You can find the nearest NCP to you at the Store Locator
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • Going from one day to another

    I need help in going from one day to the other without using the wheel.  Anyone out there that can help?

    I don't believe it's possible without using the wheel.  Any keypress you make assumes you want to create a new entry on the day/time slot you currently have selected.
    posted by DigitalFrog
    WARNING: May contain traces of nuts.

  • Slow while going from one screen to another screen

    Hi,
          I have installed SAP 4.7 version. The hardware of system is 3GHz processor and 1 GB RAM.  It is taking more time while going one screen to another. So after entering XD01 or any tcode , I have to wait for seconds some times 10 second to a get a screen and  getting a screen form another screen.
    Can any one tell me reason for this and how can be this issue resolved.
    Thanks,
    Manas

    When using system for the first time, a lot of compiling still has to be done which takes time, but also the fact that your system 'only'  has 1 GB RAM, could cause these problems as well. According to requirements, 1GB should be enough, but I would recommend at least 2GB.

  • Outlook 2010 not responding, hangs, freezes or stopped working when going from one email to another

    Hi all,
    I have an issue with one of my clients running Office Pro Plus 2010 32bit on windows 7 pro with exchange 2010 service pack 3 where they have voicemails coming in as .wav files and have a rule set up to automatically going into a sub-folder call
    "voicemails". I have deleted all the voicemails except for 5 for testing purposes (as there was over 800 messages and thought this could of been the culprit). When opening these voicemail emails, outlook doesn't respond for about 1-2 minutes and
    then opens the email eventually, then I can open the .wav file. The .wav files are approximately 50kb to 200kb in size. All other attachments seem to open quickly with the rading pane on or off.
    Troubleshooting Steps I have done;
    - Install the latest updates
    - Check to make sure Outlook is not in use by another process
    - Investigate possible issues with add-ins
    - Check to see if your mailbox is oversized
    - Repair your Office programs
    - Repair your Outlook Data files
    - Check to see if your antivirus software is up-to-date or conflicting with Outlook
    - Create a new user profile in Outlook
    - Created a new .OST
    - Perform a Selective Startup to determine if another program is conflicting with Outlook (for advanced user)
    - Create a new Windows user profile (for advanced user)
    - Started in outlook /safe mode
    - Turned off chached mode
    - Checked error logs and receive a Outlook Hang error ID: 10001
    Since doing all the above troubleshooting, I have found out the same problems occur within a Terminal Server Session (Server 2009 R2 with Service 1) running Outlook 2010 Professional Plus.
    One thing I notice is that when I click on one of the email messages, where is usually says "connected to MS exchange", it is saying "requesting data from exchange".
    The above is happening with another user so this is not user specific.
    If you need any other info, just let me know.
    Thanks in advance.

    Hi,
    Logon OWA and check if the voicemails can be played fine, make sure the mails are good.
    If you have installed the improper drivers for any devices or hardwares, this kind of issue may occur. Actually some devices which seem to have nothing to do with the issue may also be the culprit, like a printer or some audio devices in this case.
    Try restore the system to an earlier date if you have backup.
    If you have got the logs, you may post the complete logs here, it may help to determine the cause of the issue.
    Regards,
    Melon Chen
    TechNet Community Support
    Thank you very much for your reply. I could access in OWA successfully with a quick response and used this as a workaround. There was not too many logs to go from.
    It looks like there was a server that was decommissioned around 6 months ago and just a test thought I would start this up to see if our voicemail server had any relationship with it - once I started this server up, voicemails
    were opening quickly will all users. I am not sure if our voicemail  software (Cisco Unity) is pointing to our old server or if has anything to do with DNS entries but will need to dive into this further as we cannot have the old server online for too
    much longer.
    If anyone would have an inclining as to what this could be, please let me know.
    Thanks again.

  • Premiere Pro CC 2014 Stops Responding When Going From One Project To Another

    I'm running Pr CC 2014.2 - 8.2.0 (65) build - on Windows 8.1 (don't get me started.)  I can work in a single project all day with no problems whatsoever.  But if I have to switch to another project, Premiere stops responding.  It won't let me End Task and re-open Premiere, I have to reboot.  This happens each time I have to switch projects.  I uninstalled and reinstalled Premiere to no avail.  I've tolerated it for a couple of months now but it's getting to the point where I can't anymore.
    Help, anyone?

    Hi,
    Logon OWA and check if the voicemails can be played fine, make sure the mails are good.
    If you have installed the improper drivers for any devices or hardwares, this kind of issue may occur. Actually some devices which seem to have nothing to do with the issue may also be the culprit, like a printer or some audio devices in this case.
    Try restore the system to an earlier date if you have backup.
    If you have got the logs, you may post the complete logs here, it may help to determine the cause of the issue.
    Regards,
    Melon Chen
    TechNet Community Support
    Thank you very much for your reply. I could access in OWA successfully with a quick response and used this as a workaround. There was not too many logs to go from.
    It looks like there was a server that was decommissioned around 6 months ago and just a test thought I would start this up to see if our voicemail server had any relationship with it - once I started this server up, voicemails
    were opening quickly will all users. I am not sure if our voicemail  software (Cisco Unity) is pointing to our old server or if has anything to do with DNS entries but will need to dive into this further as we cannot have the old server online for too
    much longer.
    If anyone would have an inclining as to what this could be, please let me know.
    Thanks again.

  • Going from one Mac to another, with a 2 month gap.

    Howdy,
    So i'm trying to gather suggestions on how to best to this: I am moving from my PowerMac G5 to a new iMac. HOWEVER, there will be a two month gap in between. I've purchased an external drive to back up all my files in the meanwhile, but i dont want to copy the whole drive. What should i copy ?
    Thanks !
    P.s. I was thinking about just keeping the hard drive from the mac, but i cant. I've set up a RAID 0 set up and cant take out both drives.

    This user tip should answer your question:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

  • Programmatically display one page as popup from one action of another page

    Hi,
    I'm using JDev 11.1.2.3.0
    I have button action in page1.jspx, I wanna call page2.jspx as a inline popup when i run button action in page1.
    Because of my requirement, i don;t want to use dialog: as prefix in taskflow.
    Could someone tell me how i can do that Programmatically?
    Thank you very much.

    @Thanh....
    hi
    Just refer the solution to this post.Its somewhat similar to your query.It has an application attached which can help you.
    How to print adf pop up box contents?
    Thanks
    Edited by: Lovin_JV_941794 on Mar 22, 2013 3:24 AM

  • I am having trouble on certain websites going from one page to another

    I am having trouble on certain websites going from one page to another

    http://www.apple.com/support/safari
    Safari

  • Can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

    can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

    Yes, use 3rd party apps like Photo Transfer App.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/69507ce7f854c405f54 77bea99f4d498.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

  • Error while copying a page from one application to another application

    Hi All
    I am using Oracle Apex 4.0
    I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
    Thanks & Regards
    Srikkanth.M

    I'm having the same issue. How did you solve this?

  • I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader.  I used to be able to drag and drop from one .pdf to another.

    I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader.  I used to be able to drag and drop from one .pdf to another.

    If you could drag and drop pages before, it wasn't in Reader. You no doubt had Adobe Acrobat (Pro or Standard) which shouldn't be confused with Adobe Acrobat Reader. They recently added Acrobat to the name of Adobe Reader so the confusion about which product you had and/or have is understandable.

  • I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

  • Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original?

    Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original?  The cut and paste function is not available and there's no "move to" function.  Am I missing something?  It was so easy with Windows.

    Drag the files, or press Option when pasting them; this accesses the Move To function.
    (124070)

Maybe you are looking for

  • SIMPLE : Move FIle from Mac to SMB system

    I would like to move 1 file to a SMB connection. The script works when moving the file from afp to afp. But when I run this script I get a message that the program can't deliver the file. So I have always connection between the disks (Script that sta

  • How do I use apple remote with iPhone 5 ?

    How do I use apple remote with iPhone 5 ?

  • IQ770 blue screen of death safe mode limited won't run

    i turned on my comp the other day and got a blue screen of death. it let me enter my computer under a non-admin login in safe mode.  i was unable to solve the problem without the computer flashing several more screens and then turning off. i was able

  • With out storage location in PO and VL31N is it possible to post GR wit 103

    Hi There, My scenario is once PO is created then create the inbound delivery in VL31N against PO,after that post the GR with movement type 103 once inspection is complete then reverse with m.type 105. Here my question is in PO storage location is opt

  • How to get the sidecar xmp extension removed

    I open a file in ACR (and/or) PSCS4, and then do some work on the file, and for whatever reason, don't like what I did and want to start over.However,,even though I click 'cancel' or 'do not save', if I go back and try to open my original file again