Going Live with t-online

Hi, is there anybody who sucessfully published a Adobe Muse site with t-online?

Thank you for transfering the post - I didnt find anything there. But, the Telekom gave me the answer now. They still use forms, I needed to fill, sign and send back to Domain Administration Dept. There is no online access.
In a few days I will see, if this works.

Similar Messages

Going Live with BW

Hello,
We install BW 3.5 and I need some explanations about going live and BW.
Is it possible to order going live session for BW (like SAP) ?
Where are links on servicesap.com to print forms and order going live session ?
Thanks in advance for your help.
Daniel.

Hi,
service.sap.com/bi
-> Services & Implementation
AP BW Going Live Check and Early Watch Session
Every SAP BW customer should take advantage of the services offered to optimize a productive SAP BW. How they work in detail and how to order them, you can find... here (https://websmp206.sap-ag.de/~sapidb/011000358700001058721999/).
Wojciech

Going live with OIM

Hello everyone
We are supposed to go live in the next few weeks and I was wondering how we should install the connectors. Do we install the connectors as documented then overwrite the components (tasks, schedules, forms, ...) with deployment manager or should we install OIM then copy all connector components with deployment manager?
Thanks in advance

Hi,
My suggested approach is as below...
I'm not able to make out which Fiscal Year Variant you are using...
1) IMG->Financial Accounting (New)->Asset Accounting->Asset Data Transfer->Parameters for Data Transfer->Date Specifications
i) Specify Transfer Date/Last Closed Fiscal Year : 31/12/2010
ii) Specify Last Period Posted in Prv.System (Transf.During FY) : Fiscal year and period (If it is Calendar year 2010 / 12)
2) There is no problem in uploading legacy data thru AS91.
3) After uploading legacy data, update GL accounts with respective APC and Accumulated GL accounts by following steps.
    i) OAMK deactivate all reconcilation account settings
    ii) Post FB01 entries with relevant parallel currencies, if applicable
    iii) Activate reconciliation account settings using OAMK
    iv) Check AA-GL update with ABST2 report
Hope this helps.....
Best Regards,
Madhu
Edited by: Madhusoodanan Ramachandran on Oct 12, 2010 8:49 AM
Edited by: Madhusoodanan Ramachandran on Oct 12, 2010 8:51 AM
Edited by: Madhusoodanan Ramachandran on Oct 12, 2010 8:51 AM

Going live with my site on BC

I created a simple site and am trying to make it live. I changed the name servers where I registered the name to "ns1.worldsecuresystems.com" and "ns2.worldsecuresystems.com", and know propogation takes some time but it's been a couple of days. How do I know if I did it right or not? Am I missing something somewhere?
Thanks

Have you added the domain name to the site? Delegating the domain points it at the BC servers, but you also need to add the domain to your site so that the servers know what it relates to. In V3 you can find this under Site Settings > Site Domains, and in V2 under Admin > Domain Names. If you've already added the domain, check that the spelling of the domain is correct.
It's also worth clearing your browser and DNS caches. To clear your DNS cache, head to your command prompt and type ipconfig /flushdns. Clear your web browser cache as normal and try again.

Going live with our consolidation server?

We have used our consolidation PI 7.0 to run through a series of performance test and integration test with our trading partners. The instance has test data and information based on the interface testing. Our production server will not be ready in time....
What are the issues if we decide to use the consolidation instance (probably copy it with all of the TP information. Is there any issues with this?
Thanks
Mikie

yeah I was thinking about that.
I stopped Tomcat and started IIS (in shame), I could conect to the IIS welcome page without problems, even on my IPhone.
when I stop IIS and start Tomcat I can't connect at it looks like nothing is listening on port 80 for external connections. Local connections work perfectly.
Do I need to change the server.xml file to allow external connection. Currently I am using the default setting apart from changing the port to "80"
    
    <Connector port="80" address="127.0.0.1" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
               enableLookups="false" redirectPort="8443" acceptCount="100"
               connectionTimeout="20000" disableUploadTimeout="true" />

I live in Germany at the moment. How can I buy iPad mini with retina online and get tax free?

I live in Germany at the moment. How can I buy iPad mini with retina online and get tax free?

Do you qualify for a tax free purchase? The online stores will collect the required taxes for their country and region. I know in the USA, if you are a tax free corporation, and you purchase it directly with a corporate account, you can get an item tax free using the company account and the corporations registered tax exempt number. But an individual citizen cannot avoid paying the appropriate required taxes when shopping the online Apple web store.

How to distribute App Store Link before going live?

I'm new to the Itunes Connect process, and am wondering how to distribute my App Store Link before going live. My App is approved and is scheduled to launch on the App Store on September 15th. I'm about to send correspondance out to the various online review sites, but am missing this one important link that I need to supply to them.
Itunes Connect is currently Down for Scheduled Maintenance. Do I find the link there? I do have my App ID and SKU. Can I extrapolate the link based on these?
Any insight would be appreciated!

>Can I extrapolate the link based on these?
Not that I'm aware of, no.
Find the app's store id number in iTunes Connect, then use http://itunes.apple.com/linkmaker/ - this site will generate a link with a button based which book, app, song, podcast etc. you search for in the store.

Are we going live

Hi
Is SCN going live tomorrow on 5ht Dec 2011.
Regards
Pavan

simple & straight introduction of new SCN from blog
a better way to communicate and engage with the SAP community, and a chance to be part of the software world's most vibrant online destination for intelligent discussion, opinion, content, tools and resources.
Waiting for new SCN
Edited by: maheshchandra.lanco on Dec 10, 2011 10:05 PM
No good news before this Christmas / New year,
still need to wait for some more time for our New SCN
Quality matters in all over the world but after so much preparation for migration(checklists, trails) y it comes into picture again
Again in the wait list for new SCN
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/27744
Edited by: maheshchandra.lanco on Dec 10, 2011 10:05 PM

When iCloud goes live, I want to use my @me account as my main account. Possible?

I have bought several hundred dollars worth of music, TV, movie, and game apps on my @gmail.com iTunes account. When iCloud goes live, I would like to start a @me email account that I will use with all apple products. How do I get all of my apps, games, music, TV, etc from my @gmail account name to my @me account name? Is there a way to transfer purchases?
Thanks for the help!

No way to transfer purchases from one iTunes account to another.
All 3rd party apps - all paid and free apps include DRM protection which is tied to the iTunes account that was used to download the apps. This cannot be transferred from one account to another.

I'll just live with the terrible battery life on my iPhone 5....

IMHO, each new iPhone has worse battery life than the one before. I've come to expect this. They claim the battery is better, but in real life use, this is simply not the case. I've given up trying to figure it out, I'll bring it into the apple store tomorrow, maybe they'll even swap out the phone for me, but I doubt it will make a difference. The battery is plain awful, but I'm never far away from a charger, whether it's in my car or office. I've grown used to it at this point. Nor am I going to do one of the 10,000 suggestions I keep seeing on here and other forums. Restore as new? No thanks, it's just the way I want it, I don't want to spend 6 hours loading everything again. Turn off location services and apps? What's the point of offering a feature if you can't just leave it on and use it? I have everything (well, almost everything) on. Wifi, brightness all the way up, location services, it's all on. Why? I like using them. That's why I bought the phone in the first place!
So, the bottom line is: I'll live with it. I'll live with having to charge it a few times a day, I'll live with the fact that it'll never be perfect. I will go to the genius bar just for the heck of it, there are issues with iCloud not backing up, and wifi not as strong as the 4S, and sometimes the usage and standby times are identical, so perhaps mine is defective, but I doubt it'll make much difference. Sure, 6.1, or 6.0.1 will be released soon to address these issues, as I'm convinced this is mostly a software issue, but at this point I'm done trying to figure this out.
D

Hello there, EdisonGurraj.
The following Knowledge Base article should provide you with assistance in what steps to take to troubleshoot your iPhone's battery life:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Speifically:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
Cheers,
Pedro D.

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

23" ACD with pink in upper right quarter of screen, live with it?

I've got a week 28 ACD that arrived as a portion of my not-yet-shipping Mac Pro order. From what I understand this is the new spec version (it certainly is very bright with vivid colors).
I've been using it for about a week and can't shake the notion that towards the upper right quarter of the screen the color is slightly more pink/magenta than the rest of the display. Frankly, this is only noticeable in gray tones—reds, greens, and blues look fantastic no matter what. Unfortunately there is lots of gray in OS X and in general the work I do tends to include gray from time to time of course!
I've used both the Apple Display Calibrator and SuperCal. The Apple one helped alleviate the very pink cast the entire screen had with the default color profile, but I found that SuperCal produced much better results giving me neutral grays across the entire screen... almost. The pink quarter (and I swear almost the whole upper half, but that might be my imagination?!??) of the screen remains EVER SO SLIGHTLY different looking.
I also have backlight bleeding that I'm prepared to live with as it's barely noticeable most of the time. I don't have any image persistence, dead pixels, etc. Is it worth either the long drive to the Apple Store or the high cost of shipping it back for a replacement? Should I not demand perfection? The problem is risking getting a WORSE replacement at a troublesome expenditure of time and money to me.
I also want to hear if anyone has the same barely-noticeable-pink-in-only-a-portion-of-the-screen issue.
PowerBook G4 15"/800MHz Mac OS X (10.4.7) 23" Cinema HD Display

Sure I have it too ... When I bough my first 23 it was pinkish overall and I finally messed about with the calibrating long enough to accept the result and live with it ... I just bought my second one and now have a pink to green gradient ... can't get rid of it ... Reading the forum I also seem to have backlight leakage and the translucency problem ... Haven't noticed a dead pixel yet ... if that one happens ... there will be a dead salesman at the store ... It's a pitty ... loyalty to Apple only goes a certain way ... thinking of buying Sony LCD's instead ... but then I read they are the same ... Maybe I just have to live with it ... and dream about the paradise holiday I will make with the profits of my edit on these not perfect displays ...

Data conversion for New GL - Going live during fiscal year

Hi Experts,
My client is going live on Oct 1 (fiscal year in Jan -Dec). So for data conversion we need to load P&L and BalanceSheet as of Sept 30, 2009. I need your help to resolve few open issues. (we have activated Doc Splitting with Zero Balance and Segment )
1) When we load P&L balances - how can I assign Profit Centers to all these P&L iitems .
2) What is the procedure (best practices) to assign Profit Centers to all the Balance Sheet items since we are going live during Fiscal Year
3) When we process open items (AR, AP) in month of October how the Profit Center assignment will work?
(My client will be using Profit /Cost center terminology first time, so we need to map all the B&S and PnL items to Profit centers)
4) What is the best way to map all the Balance Sheet GL accounts to Profit Centers.
Sorry for asking too many questions. Any help would me very much appreciated.
Thanks,
Sam

1) When we load P&L balances - how can I assign Profit Centers to all these P&L iitems .
Each P&L account balance has to be upload with cost centre, then automatically PC will be triggered.
2) What is the procedure (best practices) to assign Profit Centers to all the Balance Sheet items since we are going live during Fiscal Year
Let client decide the profit centre for balance sheet items, since they knows which balance relates to which pc
3) When we process open items (AR, AP) in month of October how the Profit Center assignment will work?
While uploading AR,AP balances, each line item to be uploaded with profit centre, automatically in october PC assignment will work.
(My client will be using Profit /Cost center terminology first time, so we need to map all the B&S and PnL items to Profit centers)
4) What is the best way to map all the Balance Sheet GL accounts to Profit Centers
Try to identify each balance sheet gl balance to each profit centre, this will help in future reports. otherwise put in common pc

What's going on with U-Verse in South Miami

For the past two months, we have been getting dropped signals (bundled U-Verse and including landline, mobile phone, television and internet) sometimes three times a day. I have had phone calls drop while speaking to my boss, (I work from home) favourite shows will all of a sudden give us that no service screen, which means we lose portions of the dialogue, and the internet stops working. I have not dared to call ATT as frankly the only solution that Customer Service seems to know is "Oh it must be your RG that needs changing." Well that's a load of rubbish since if it's the RG then ATT have some serious problems as I have spoken to at least six people that I know that also have U-Verse and they are all having the same problem, but kept thinking it was just them.
The internet signal has also got painfully slow and since we pay a juicy bill of $315 dollars a month and subscribe to the best package that U-Verse has to offer, I do not expect to have these constant problems. Nobody is perfect, and a little issue once in a while is acceptable, but not two to three times day! In addition... we receive an electronic bill and this has been a very hectic month for me, so realising that today was the 12th and I know that the bill is usually due sometime around this time of the month, and not having received a bill, I went online to investigate. Sure enough - on login to the payment page, it said "past due!" Well send me a bill and I will pay it. I just don't know what is going on with U-Verse but it is very distressing. I believe the saying is that they have, "Gone to ** in a handbasket." On a positive note - we can now apparently fast forward and rewind On-Demand TV shows, and which made no sense before that this feature was unavailable. However... this does not make up for the recent poor service and non-arrival of my electronic monthly bill, ( will have to go back to paper - not cool) and then having the nerve to tell me "past due."
[Per Guidelines: Keep it Relevant and Appropriate].

Chris, As explained, and to be honest I am usually very long-winded and detailed in my explanations because readers miss things, as you might have done in this case. It is not my problem alone. Whenever we have a problem with any utility or especially in the case of ATT services, I always check with anyone that I know that uses the service and over a broad area, not just in my street but anyone I know in an approximate 8 - 10 mile area, to see if our issues are isolated just to us. If they are, then I know that it is most likely a piece of equipment we are using. In this situation, as there have been in others, every single person that I spoke to is experiencing the same situation. And again - this is why I said that I have thrown up my hands in exasperation and usually get another family member to call customer service if there is a problem, as I know exactly what they are going to tell me. "Let us check your line - (you then spend 45 minutes on the phone with them) No... everything seems fine, it must be your RG, you need to buy a new one." Mea culpa - I have no patience or time for scripted c.s. reps. Two years ago, we had a lightening strike that literally struck the ATT box next door. The wires in all the boxes on the street (including the ones in our yard) were fused and black when the box was opened. And yet... when one of my neighbours (who apparently did not connect the lightening strike with the loss of service - sigh... what can I say...) called ATT, they got the same response. "No, we don't see any problems here, it must be your RG." Com'n! It was a lightening strike! And on an aside - the new cable is now still hanging from my backyard fence as they were supposed to come back to bury it. Two years ago... So the dear space-cadet neighbours, paid for a new RG, hooked it up to find there was no reception (ya think?) and to then find out that theirs was just fine, and now there was the hassle of having to package the new one and take it to the UPS store to ship it back, and which is another frustration, because it is not possible to return it to a local store or office. Unlike yours truly, they apparently did not do their research with other users, even though we had no service for over a week. So - by a process of survey and elimination, it cannot be the RG, unless everyone I spoke with is using the same RG. But there have been quite a few changes that we have noticed recently, ranging from new look menus, to those very beautiful images when first turning on the TV. So is it not entirely possible that in all the changes and tweaking, something else has been affected? Look it happens - but I can never understand why they can't just say,"Sorry, we are working on "upgrades" so we apologise but you might experience these little set-backs for a while until we are through." Why always blame it on the RG? Another way to make more money?

Authentication with SharePoint Online

Hi
I have a win32 C++ application which is able, using NTLM authentication, to call the different SharePoint web services (lists, copy, etc) in a local SharePoint installation. This is done by building XML SOAP requests at runtime and HTTP posting.
This approach does not work with SharePoint Online and I was wondering if it was possible to make the existing code work without a total rewrite.
I have experience with OAuth 2 as I have previously integrated to OneDrive, Google Drive, Dropbox etc. using their REST web service api.
Is it also possible to use OAuth 2 with SharePoint Online and the web services in a similar fashion? Have refresh tokens and exchanging them for access tokens which are sent to server in post.
I have tried playing around with it, creating an app in the Microsoft Seller Dashboard and tried using client id with OAuthAuthorize.aspx, but getting error 'The clientId 'xxx'
is not a valid service identity.". No idea what that means.
Am I going the wrong way and can someone point me in the right direction?
Thanks!

Hi,
In order to access SharePoint Online via REST API, we can use SharePointOnlineCredentials object to pass the authentication.
Here’s a code sample that connects to the REST API:
var creds = new SharePointOnlineCredentials(SPO_USERNAME, StringUtilities.ToSecureString(SPO_PASSWORD));
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(SPO_URL + "/_api/web/lists");
request.Credentials = creds;
request.Method = "GET";
request.Accept = "application/json;odata=verbose";
request.Headers.Add("X-FORMS_BASED_AUTH_ACCEPTED: f");
var response = (HttpWebResponse)request.GetResponse();
using (var reader = new System.IO.StreamReader(response.GetResponseStream()))
Console.WriteLine(reader.ReadToEnd());
More information:
http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.client.sharepointonlinecredentials(v=office.15).aspx
http://sharepointtaproom.com/2014/01/23/connecting-to-sharepoint-onlines-csom-or-rest-apis-from-sharepoint-2010/
http://sergeluca.wordpress.com/2009/08/31/calling-sharepoint-dlls-from-c-code/
Best regards
Dennis Guo
TechNet Community Support

Going Live with t-online

Similar Messages

Maybe you are looking for