Are we going live

Hi
Is SCN going live tomorrow on 5ht Dec 2011.
Regards
Pavan

simple & straight introduction of new SCN from blog
a better way to communicate and engage with the SAP community, and a chance to be part of the software world's most vibrant online destination for intelligent discussion, opinion, content, tools and resources.
Waiting for new SCN
Edited by: maheshchandra.lanco on Dec 10, 2011 10:05 PM
No good news before this Christmas / New year,
still need to wait for some more time for our New SCN
Quality matters in all over the world but after so much preparation for migration(checklists, trails) y it comes into picture again
Again in the wait list for new SCN
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/27744
Edited by: maheshchandra.lanco on Dec 10, 2011 10:05 PM

Similar Messages

Assign Company Codes to new Credit Controlling areas after going live.

Dear FI Experts;
Our Status Now:
We Have 3 Company Codes, CC 1000, 2000, 3000 and one Credit Controlling Area Code 0001, and the Customers are assigned to this Credit Controlling area with no problems and we are live since about 9 months ago.
Requirement:
We have a requirement to split the Customer Credit limit between companies, which means we have to create more credit control areas for example CCA 0002, and 0003, and though assign our 3 company codes to the new credit control areas, as follows:
CC 1000 to CCA 0001
CC2000 to CCA 0002
CC3000 to CCA 0003
And my Question is, what is the procedures to follow to do that (Not a Customization Procedures, I mean the How the Customers would be affected and the open items for them and how to resolve that), since as mentioned above we are already live since 9 months ago, and credit management is active and all our customers are assigned to our old Credit control area 0001, and also what is the consequence of doing that new assignment since we are live, thanks for your reply

You will need to manage to create new credit master data under new credit control area. System should reorganize existing credit data after reassignment, that is when you change master data (create credit master under new credit control area), new credit exposure is calculated based on AR in company code and existing open orders will get rechecked for credit under new credit control area & new risk categories assigned to them.

Open Process Orders take-over when going-live

Hello PP People
Does anyone have any experience/recommendation about the transition/take-over of open process orders from a legacy system to SAP when going live ?
These process orders are started in the legacy system and should arrive in a partially confirmed (hours/consumptions) status in the SAP system at go-live. How is this generally tackled from a CO point of view ?
Any hints on this could be helpfull
Thanks and best regards

Hi,
The method adopted depends on the business requirements. There are quite many options which can be adopted. So first thing i would say is get a clear business requirement what business expects from this migration.
Some of the options could be
1. Close all orders in the legacy system & create new orders in the SAP system & post back the confirmations, post goods movement as per the legacy system.
2. Create a material per order carrying the cost (WIP value) as per the legacy system, assign this component in the component list & post this mateiral to the order, thereby the WIP vlaue will be acrrued to the order.
3. Ask your FI-CO personnel to post the WIP value to the order from FI side.
There could be many more approaches, the choice depends purely on business needs. Hope the above gave you some guideline.
Regards,
Vivek

Hey Apple when are you going to fix the problems with IOS 8.3??

Hey Apple when are you going to fix the problems with IOS 8.3??
Message is working weird.
I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
If there's a fix coming when will we see it?
(I'm using iPhone6 plus)
I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!

I have a Verizon iPhone 6 and am having none of those problems.
SueMac wrote:
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-…

Data conversion for New GL - Going live during fiscal year

Hi Experts,
My client is going live on Oct 1 (fiscal year in Jan -Dec). So for data conversion we need to load P&L and BalanceSheet as of Sept 30, 2009. I need your help to resolve few open issues. (we have activated Doc Splitting with Zero Balance and Segment )
1) When we load P&L balances - how can I assign Profit Centers to all these P&L iitems .
2) What is the procedure (best practices) to assign Profit Centers to all the Balance Sheet items since we are going live during Fiscal Year
3) When we process open items (AR, AP) in month of October how the Profit Center assignment will work?
(My client will be using Profit /Cost center terminology first time, so we need to map all the B&S and PnL items to Profit centers)
4) What is the best way to map all the Balance Sheet GL accounts to Profit Centers.
Sorry for asking too many questions. Any help would me very much appreciated.
Thanks,
Sam

1) When we load P&L balances - how can I assign Profit Centers to all these P&L iitems .
Each P&L account balance has to be upload with cost centre, then automatically PC will be triggered.
2) What is the procedure (best practices) to assign Profit Centers to all the Balance Sheet items since we are going live during Fiscal Year
Let client decide the profit centre for balance sheet items, since they knows which balance relates to which pc
3) When we process open items (AR, AP) in month of October how the Profit Center assignment will work?
While uploading AR,AP balances, each line item to be uploaded with profit centre, automatically in october PC assignment will work.
(My client will be using Profit /Cost center terminology first time, so we need to map all the B&S and PnL items to Profit centers)
4) What is the best way to map all the Balance Sheet GL accounts to Profit Centers
Try to identify each balance sheet gl balance to each profit centre, this will help in future reports. otherwise put in common pc

SEM going live activities

Hi SEM folks,
I would like to have your 2cents on what activites are necessary for going live phase & just prior to that for SEM. Eg. aspects to check. Any tedious activities requiring more SEM / BW support personnel. CPM / BSC / BPS / BCS aspects?
I know the question is a bit too general but I am not sure what tasks need to be performed for SEM just prior to and going live. Would clients need to engage additional SEM consultants at this point? Any system health check required on BW?
rgds,
Bryan

Bryan,
Check out the SEM performance guide on SDN or service.sap.com - I think it was under BPS knowhow.
Marc Bernard also did an excellent presentation at BW and Portal conference on Performance and you can find it at on SDN on
https://www.sdn.sap.com/sdn/events.sdn?page=bwnp_2005_catalog.htm
"Performance Tuning Tools and Techniques for SAP BW Business Planning and Simulation (BW-BPS)"
Some good transactions to know at BPS_stat0, BPS_stat1, STAD, etc.
Also check OSS notes since there is a performance benchmark test you can do and it was outlined in an OSS note.
Hope this helps,
Mary

So what are you going to do about it?

What are you going to do about these iPad2 shipping problems, Verizon? Your plastered dates of "3-4 weeks" has passed and we are now in week 5+ with nothing to show for. How is this problem going to be rectified? I'm tired of talking to phone reps that have no information because they can't see store systems, and I'm tired of retail stores that hide the screen and blurt off "it's in the warehouse system, but that's all the information we have right now." **bleep**!? You guys got my money over a month ago. Apple has been back to 2-3 week delivery estimate for at least a week now. I would love an answer. Maybe this board will be more successful than actually talking to you guys in person or over the phone. I would love a response, even if it's through private message or email. I've tried your other routes.

On yesterday, I was extremely fed up with waiting as I just hit 4 weeks (ordered March 22nd), I told my CSR (in an email) to cancel my stinking order, demanded my money back, called the 800 number three or four times to gripe and complain and I FINALLY GOT SOMEBODY ON THE PHONE that cared enough to actually do something about it! I'm sure all you have experienced the same thing where the rep on the 800 number is just briefly glancing at the order and then giving the company line.
I pressed yesterday and told the rep I needed someone that would escalate this and give me answers because there was certainly a Black 32 GB/3G with my name on it and that someone just had to push the right d**m button to match it up with me. Well she placed me on hold for 5 or 6 minutes maybe even longer but it was worth the wait. She told me that she did not have access to see anything with my order but that she got a floor supervisor because she too was concerned that my wait had been too long (going on 5 weeks on this Tuesday). The Supervisor did have the magic access and was able to determine that my shipping date is Monday, April 25th and that I'll have it on two days Fedex delivery (April 27th)!! I felt relieved to hear this and so was the CSR and she told me how excited she was to be able to provide me relevant information! On Monday, I should finally have a tracking number and hopefully my package will arrive as promised.
I will gladly return to this forum on Monday evening with an update but I must stress to each of you who were like me languishing on 4 to 5 weeks to make the same call to 877-807-4372 (regional Telesales) number. Give them your location code and they can tell you which region you ordered from if you ordered by phone. I live in Texas and my call was handled by the South region for Telesales and their number is 800-256-4646. Please don't waste your time calling the general Customer Service number (800-922-0204)....you need Telesales and you specifically need your regional team that you ordered from. Press the CSR to check with a supervisor to gain detail shipping information because it is their beyond the grasp of the CSR!!!

Going live check for SAP upgrade projects

Hello,
I am interested in "going live check" service and procedures for my upgrade projects. May I find any documentation? Do I have to pay for it?..
Thanking you in advance and a happy new years!
Kind regards
Nilüfer Çalışkan

Hi Nilufer,
The following Input as follows :
Source : http://www.thespot4sap.com/upgrade_guide_v2.pdf
This service is included as part of your annual maintenance fee.
The underlying concept of the SAP GoingLive Functional Upgrade Check is
to ensure smooth operation of your mySAP.com solution by taking action
proactively, before severe technical problems occur.
The GoingLive Functional Upgrade Check is made up of three sessions
(Planning, Analysis and Verification)two sessions (Planning and Analysis)
before the upgrade and the other (Verification) after the upgrade.
Planning Session: This session should be performed as much in advance as
possible when the upgrade is first being considered.
Analyses compatibility for the target release with regards to connected
systems in the Solution Landscape, OS version, DB version, installed Add-
Ons, Plug-ins, Country Versions, and so on.
Analysis Session: It is generally performed two months before the
production upgrade (consider lead time for hardware procurement).
The focus is on resource planning and system configuration.
There is a high-level hardware plausibility check (this is not a hardware
sizing exercise).
Potential resource bottlenecks are identified.
Necessary changes will be recommended to prepare the system for the
productive use of the new release.
38 SAP Upgrade Guide | Simplifying Your Upgrade
Verification Session: Generally performed four to six weeks after the
production upgrade, and the recommendation from the analysis session
implemented.
Comparison of performance with results prior to upgrade
Recommendations on configuration and optimization
More information and ordering . For more information, see the GoingLive
Functional Upgrade Check web page at:
<b>http://service.sap.com/goinglive-fu</b>
To order a GoingLive Functional Upgrade Check, contact SAP Customer Care
Center at least eight weeks prior to the planned upgrade of your production
system.
For customers of value-added resellers (VARs) such as CBS customers in the
US, special conditions apply. Contact your VAR.
Remote Upgrade Service
Remote Upgrade Service is a technical upgrade that is performed by SAP
remote consultants. Pricing is based on the complexity of the customers
environment.
SAP performs the technical upgrade of your system, allowing you to focus on
the functional and training side of the upgrade. You are still responsible for
resolving object conflicts.
See SAP Notes 106447 and 84044.
The Remote Upgrade Service is an attractive option for CBS sized customers
with small or non-existent mySAP Technology group.
For more information see the Remote Upgrade Service web page at:
http://service.sap.com/remoteupgrade
Resources
The following list shows some of the resources you can use as you prepare for
your upgrade of SAP. These resources include:
Your installation partner
Customers and others you have networked with at customer functions and
conferences such as:
ASUG
Hope this Info helps you.
<i>Advanced New Year wishes.</i>
Br,
Sri
Award points for helpful answers

Going Live and Editing

HI
I have a business catalyst website: charteraplane01.businesscatalyst.com and now I will be going live charteraplane.com.au on the Adobe servers using the credit from the subscription.
Although my website is all good to go but my question is:
Once I go live and want to make changes ( adding or deleting things ) can I do that in MUSE and then syncronise this with the live website. I think it can be done but I am not sure. I do not get into a situation where I can not
Any help is welcome

Business catalyst is a hosting platform, which allows to host your file. So when you click publish first time in Muse and publish your site to Business catalyst, it will create two url for you,
mysite.businesscatalyst.com (System Domain)
mysite.worldsecuresystems.com (Secure Domain)
Once your site is published, you add a domain to the site, like mysite.com (custom domain)
Now all these three url are pointing to the same site, which is hosted by business catalyst. So when you click publish in Muse, Muse will show you the list of website on business catalyst under your account. check this screenshot
So when you select the site, it is going to your site. which can be accessed using all the domains (system,secure or Custom domain as defined above). But as you have custom domain, system domain is not used anywhere.
Do let me know if you have any question.

Going Live with BW

Hello,
We install BW 3.5 and I need some explanations about going live and BW.
Is it possible to order going live session for BW (like SAP) ?
Where are links on servicesap.com to print forms and order going live session ?
Thanks in advance for your help.
Daniel.

Hi,
service.sap.com/bi
-> Services & Implementation
AP BW Going Live Check and Early Watch Session
Every SAP BW customer should take advantage of the services offered to optimize a productive SAP BW. How they work in detail and how to order them, you can find... here (https://websmp206.sap-ag.de/~sapidb/011000358700001058721999/).
Wojciech

Mandatory steps and checks before going live

Hi ,
One of my project is almost done but i am confused what should be the steps and mandatory things i should check before going live
Regards
Agranshu

Hi Agranshu,
Check the thread
What are the Steps to go live project in B1?
*Close the thread if issue solved.
Regards
Jambulingam.P

I heard iphone 6 bends. Are you going to make another iphone 6 but stronger than before?

A Lot of peole said that the iphone 6 plus and maybe the 6 bends because of the use of putting it in your pocket. So im thinking, are you going to make another iphone 6 that has stronger metal that is going to be fexible or are you going to make it a little thicker so it wont be a problem everyday?

Well unfortunately my iPhone 6 128GB is bending by the volume buttons. Have a Spigen Neo Hybrid case on it and has just been in my pockets whenever I don't use it. I also noticed an LCD hot spot in the middle of the screen. I'm very upset at the fact I'm having this issue..Not to mention I live 2 hours away from the nearest Apple store and for me to drive there just to get a replacement is an inconvenience of time and money...Also at this time most apple stores are out of stock of my device which puts me at an even more upsetting state.

BT Account goes live tomorrow - no router yet

Hi all,
My account with BT is set to be active from tomorrow, but I am still awaiting delivery of my router - I wondered if there was a way of getting my ADSL log-in details beforehand so that I could log into my BT connection with my existing hardware?
If my account goes live tomorrow, does this mean that my current provider will stop at the same time and I'll be left without a broadband connection until the router arrives?
Sorry if these are simple questions; I've never had to switch a provider other than when moving homes before...
Thanks,
TFT
Solved!
Go to Solution.

Hi TwoFingerTyper,
The router is normally delivered on the same day as your broadband is activated so hopefully it will be with you before it switches over.
If you are using your own equipment the username is [email protected] where 'your' equals your first name and 'name' equals your surname, for example [email protected] BT Broadband does not require that you enter a password to connect, but some routers won't connect to the Internet without a password. If this is the case, enter the word BT.
Cheers
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

When are we going to be able to order prints via elements again

when are we going to be able to order prints via elements again

I live in northampton but it was kodak that used to print via elements before they went under

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Are we going live

Similar Messages

Maybe you are looking for