Goods issue - getting message FN031

Hello,
while making goods issue to certain cost center, a message FN031 occurs - Business area & does not exist.
Cost center, plant  masterdata is ok .
GI document has CORRECT value of business area.
question - what  configuration activity can influence this message ?
Regards,
Laimonas
Edited by: Laimonas Bindokaitis on Sep 20, 2011 10:50 AM

Laimonas Bindokaitis wrote:
Hello,
>
> while making goods issue to certain cost center, a message FN031 occurs - Business area & does not exist.
>
> Cost center, plant  masterdata is ok .
> GI document has CORRECT value of business area.
>
> question - what  configuration activity can influence this message ?
>
> Regards,
> Laimonas
>
> Edited by: Laimonas Bindokaitis on Sep 20, 2011 10:50 AM
Hi,
Check the data comparison is proper in trx OMJM.
Regards
Shiva

Similar Messages

  • Posting goods issue using Message type SHPCON and idoc type DELVRY03

    Hi SAP Gurus,
    I am using message type SHPCON and idoc type DELVRY01 with processing code DELV to post goods issue for a delivery note.
    I tried to simulate the inbound entry via WE19. The scenario should be posting goods issue based on the delivery order.
    In some cases, quantity issued is less than the quantity in the DO. For this, I need to change the delv quantity in the DO via VL02N before I select Post goods issue button. This will change at the same time post the goods issue.
    What I have filled up are the fields:
    E1EDL20-VBELN = DO num
    E1EDL20-VSTEL = Plant
    E1EDL18-QUALF = "PGI"
    E1EDTH13-QUALF = "006"
    E1EDTH13-NTANF = date today
    E1EDL24-POSNR = 000010
    E1EDL24-MATNR = material num
    E1EDL24-WERKS = delv plant
    E1EDL24-LGORT = sloc
    E1EDL24-LFIMG = updated quantity
    But everytime I simulate using WE19, the entire quantity in the DO is not changed at all. The goods issue quantity posted is still the original DO quantity.
    May I know how to do this? Thanks.

    Put value in E1EDL24-LGMNG for qty to pgi.

  • Goods Issue gets cancelled even after GR

    Hi All,
    This is related to a stock transfer scenario within 2 plants in different company codes.
    I created a Purchase order suppose in plant A . Then I post the Outbound delibery in Plant B which is supplying palnt.
    Both plants A & B are in different company codes.
    Godds issue is done in Vl02n in the supplying plant.  Then the Goods receipt is done in the receiving plant against the outbound delivery.
    Now if I try to can cel the goods issue document in the supplying plant I could cancel this document even though the GR is done.
    Please let me know how is this possible and how we can have a check on this?
    Regards
    Jimmi

    A cancellation will always be possible if enough stock in transit is stored in the stock in transit segment of the receiving plant.
    The only criteria for reversing a delivery are as follows:
    1)  Goods movement status C
    2)  No subsequent billing doc (which could be reversed then VL09 works)
    3)  If the STO is intercompany scenario, the system reaction you are
        describing is part of the standard.  The reason is that the
        scenario is operating in two companies and hence the controls are
        not there.
    4)  If the STO is intracompany scenario, this is allowed if there is
        any stock intransit even if the stock is from a different GI.>>
    Edited by: Kenix Chiang on Aug 15, 2011 1:49 PM

  • Goods Issue Error Message for Stock Transport Scheduling Agreement

    Hello,
    I have set-up an inter-company stock transport scheduling agreement, delivery is created and stock is picked. Upon PGI of the delivery I receive the following message, has anybody and ideas of the root cause?
    Message - E M7 153
    Purchase order XXX does not contain items for a stock transfer
    Thanks.

    Dear,
    Please check vendor
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/help-with-config-of-one-step-sto-720045
    Regards,
    Syed Hussain.

  • Goods issue - Message type WMMBXY

    Hello,
    I am using message type WMMBXY and process code WMMB for generating idoc. I need to do goods issue using above setting. Is it possible to do goods issue using message type WMMBXY and process code WMMB?

    Mark,
    The messages
    Delivery has not yet been put away / picked (completely)
    Delivery has not yet been completely processed by WM
    are displayed when you try to do PGI on a WM-relevant delivery that has not been picked completely. I'm not sure what the pick order but we have the SAP system with and without WM and in WM we use "transfer orders" (transaction LT03) to pick the deliveries. In this case the picked quantity field is grayed out in VL02N and it's being updated when a TO has been created. TO also have to be confirmed (LT12, I think), so in our case the reason for such error messages would be that TO is either missing or not confirmed.
    We are successfully using SHPCON with PIC and PGI but only in our non-WM SAP system. In the one with WM I was unable to use IDocs to pick the deliveries due to the strict customer requirememts. So we use BDC (I even wasn't able to find an FM for that) to create and confirm TOs and then use only the PGI SHPCON IDoc.
    I have a feeling that you might need either a different or an additional IDoc for WM to pick the deliveries successfully. Take a look at the WM... IDocs, maybe you need the one that creates the transfer orders or something. Also with DELVRY01 IDoc you can use message type WHSCON, maybe it would work differently (although I didn't notice any difference in our case).
    If there is no IDoc for "pick orders" you might have to create your own ABAP program to run between the PIC and PGI IDocs to perform the missing step.
    Good luck!

  • Issue while doing goods issue

    Daear All,
    while doing goods issue getting the error message : Acct. 200510 for trans./event key BSX, postable directly.
    the same in goods receipt also.
    please help me on this.
    Best Regards,
    Venkat.

    In FS00 ,Please TICK 'post automatically only' for the GL 200510.
    Regards
    jabeen

  • Goods Issue indicator

    Hi,
    Goods Issue indicator error in (Tcode MIGO > Movement type - 123)
    One excisable item has been returned to vendor (122 movement) wrongly, now when I am trying to revrese return to vendor delivery (123 movement type) for the same getting following error -
    Please enter Goods Issue indicator
    Message type__________ E (Error)
    Message class_________ 4F (Message class for India localization)
    Kindly suggest me the tcode OR path to maintain Goods issue indicator for this item.
    Same process I have doen for another excisable item no such error comes at that time.
    Thanks & Regards
    Sumedha
    Edited by: Sumedha Arya Hanspal on Feb 24, 2010 1:42 PM

    This transaction is not having 122 or 123 movement types..
    This issue is not related to SPRO, as the same reversal done for another item smoothly, this is related to particular item for which I need to set Goods Issue indicator.
    regards
    sumedha

  • Good Morning, I am having issue downloading ebook. Getting message "Adobe digital edition 4.0 has stopped working" with problem event name : APPCRASH. Any ideas how to fix this?

    Good Morning, I am having issue downloading ebook. Getting message "Adobe digital edition 4.0 has stopped working" with problem event name : APPCRASH. Any ideas how to fix this?

    Do you have the most  current dirver for the printer?

  • STO - JEX invoice getting created without Post goods issue of delivery

    Dear Experts,
                We have configured the "Stock Transport Purchase Order" process between 2 different plants within same company code. To satify the Indian legal process, after PGI issue we configured the process as "Proforma" invoice creation using Billing type ZJEX (Copy of JEX). And then Excise Invoice creation using J1IIN.
                      Now problem we are facing is, without "Post Goods Issue" of delivery ZNL also system is allowing to create the invoice using ZJEX type. We are using the standard NLN item category only. But our requirement is, without "Post goods issue" system should not allow to create the sales invoice.
    Can anybody give your suggestion on this issue.
    Thank u
    Regards,
    Nag

    Dear Experts,
            Thanks for your feedback. As per your suggestion i modified the copying requirement in to "034". But during invoice creation i am getting the message that "The item is not relevant for billing". So not successful.
    Can you please give suggestion to solve this issue
    Regards,
    Nag

  • While doing the goods issue system is thruoghing an erro message no VL621

    hi ,
    actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
    Risk of posting several mat.documents for one delivery->long text
        Message no. VL621
    Diagnosis
        Processing has been terminated because there is the risk that the system
        creates several material documents for this delivery.
    Procedure
        If this message occurs frequently, please note the exact situation and
        procedure as well as error messages and inform the system administrator.
    and we changed that error to warning also still we are getting that error message.
    how to stopthis error message.

    hi actually not for serial number check.
    there is a Z field in serial number master which is used for SIM number.
    that SIM number will be validated with available SIM number from another Z table.
    after this SIM error system is throughing this VL621 error after transaction terminated message.

  • Error message KI248 on delivery document when posting goods issue

    Hi,
    On the delivery document, when posting goods issue I get the following message:
    "Account 60700000 requires an assignment to a CO object
    Message no. KI248
    Diagnosis
    All given account assignment objects (order, project) are defined as statistical.
    System Response
    Statistical orders or projects are ignored when FI and CO are reconciled. You must enter a cost center, order, project, or cost object to which the costs are posted for CO postings.
    Procedure
    Enter a cost center, an order, a project, or a cost object that is not statistical. The posting row affected is 000 and the account is 60700000."
    On the sales order I have a statistical order.
    CO-PA is active, cost element 607 is included in PA transfer structure.
    I also tried with cost center allocation in OKB9.
    60700000 is defined  as a cost element (category 1).
    Any suggestion could be helpfull.
    Thanks,
    Lavinia

    Hi,
    Thank for your answer.
    I tested with element cost category 12, it's working, but not the way I need: I don't have any value on the cost center.
    When I don't have statistical order in sales order, the sistem it's working exactly how I need: the costs are posted on cost center and the VPRS condition is transfered to CO-PA on profitability segment.
    Anyway, I finaly make it work with a cost center substitution.
    Lavinia

  • Post Goods Issue - error : Class type does not exist - Message no. VK662

    Hi,
    I am trying to do Post Goods Issue and getting this error: Class type does not exist
    When double click on the error, it shows it is a message no vk662.
    Any help to resolve it is appreciated. Thanks in advance.
    -Sri

    Sri
    There is a problem in batch determination.
    The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
    Display the batch from the delivery item  using MSC3N and go into the Classification tab. You should have a class of class type 22.  See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
    Hope this helps.

  • Hi, problem in goods issue to cost center Error message M7314

    Hi to you all,
    I am trying to post a good issue for a material to a cost center but an error message is coming out and says that "stock becomes negative see long text. message no - M7314". the material type was at the begining not valorated (like NLAG material type) but later on it had to be valorated, so the flag was triggered from the basic configuration of material type. if i see the material master record i can noticed that the material has no price neither the amount of stock in the plant, but if i check the stock in any MM report TX like MMBE or MB52 i can see that there is some stock in it. we need to registered the stock issue, any help that you can provide me i´ll appreciate it.
    Best regards.
    OOOP

    When we issue the material to Cost Center then amount (Qty X Value) get debited to that particular cost center,
    I think system fails to calculate the amount as there is NO value maintained in material master
    this is what I thought
    Error Message M7314 is
    Short Text
    Valuated stock becomes negative: & -> see long text
    Diagnosis
    When a goods movement or an incoming invoice is entered, the system simulates the update of the valuation data in the material master record. The current simulation indicates that this posting would lead to a negative stock quantity (or a negative sales value) although negative stocks are not allowed for this material.
    Procedure
    You cannot post this item. Therefore, terminate current processing.
    Display the material master record (accounting data).
    Check the price, stock value, and stock quantity (also for the previous month, if required).
    Proceed
    Display the material documents and the accounting documents for the material and check whether the stock quantity is realistic.
    Material documents Proceed
    Accounting documents Proceed
    If the stock value does not correspond to the stock quantity, data inconsistencies may exist.
    Please contact SAP Support via SAPNet Frontend as soon as possible.
    Support requires the following information from you:
    ID and number of this error message (M7 3XX)
    Material number and plant
    Total stock and its value (see the accounting data in the material master record)

  • Error Message no. 00398 in Goods Issue

    Hi,
    We are getting error at the time of Goods Issue posting against reservation with movement 281 (network) as below.
    ERROR
    25.000-
    Message no. 00398
    Diagnosis
    Placeholder for batch input error text, this message is not output.
    25.000-
    Please help for resolving the issue
    Regards,
    Harshal

    Hi All,
    Problem is resolved with the help of ABAPer. It was due to custom User exit implemented in our system.
    Thanks for support.
    Harshal

  • I am trying to burn an iDVD but get message menu contains no buttons. How do I fix this issue?

    I am trying to burn an iDVD, but get message menu contains no buttons. How do I fix this issue?

    That essentially means that there's been no videos or slideshows added to the project as each of those items will create a button to play.  What have you added to the project?
    OT

Maybe you are looking for