Goods Receipt for Inbound HU - WS_DELIVERY_UPDATE

Hi All,
I have a requirement to automate transaction VL60p to do GR for
an inbound delivery with HU.
Since this is a SAP enjoy transaction I can't use BDC and there doesn't seem to
be a BAPI for this.
I plan to use WS_DELIVERY_UPDATE, filling tables VERKO and VERPO.
Is my approach correct?
If not can you point me in the right direction?
Thanks,
Miguel

Anyone?
I've also added IT_OBJECTS as one of the tables I'm passing.
Its of type PGR_OBJECTS which is described as Objects for Partial Goods Receipt.
However Posting is still not happening.
Thanks,
Miguel

Similar Messages

Post Goods Receipt for Inbound Delivery via IDoc SHPCON (DELVRY03)

hi all,
I'm using IDoc SHPCON (Delvry03) for posing goods receipt for inbound delivry.
Can anyone give a sample IDoc or tell which segments must be filled.
Thanks!
Regards,
Hui

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Goods receipt for inbound delivery

Hi,
I'm using idoc DELVRY03 in order to post a goods issue. And It's working very well.
I want to make a goods receipt for an inbound delivery using idoc DELVRY03. When I use this idoc for this (To make a goods receipt), my delivery can't be updated any more (Just like if the goods issue was done) and Its status are updated. And I can't to make the goods receipt manually. But the stock isn't updated, No item document is generated, and the quantity received is still equal to 0.
Can any one please tell me if there is a special thing I need to do in order It works. And If It's not possible, to make the goods receipt using delvry03, what's the idoc type allowing to do this.
Thanks in advance

Hi
Please try using idoc type DESADV01.
Please award points if you find this helpful
rgds

Post Goods Receipt for Inbound Delivery using WHSCON IDoc

Dear All
Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
We create a delivery (type NL = replenishment delivery) for this POs
As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
We dispatched 50 units of a product => QTY:50:12
The partner received indeed 50 units => QVR:50:66
Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
the goods receipts for the products in the original stock transport order and
upate the message flow in the delivery
My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
To make a long story short here are my questions:
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
Does anybody have an example on how to fill the WHSCON IDoc?
Or is my approach a cul-de-sac ?
Kind Regards
Uwe
PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Partial Goods Receipt for Inbound Delivery

Hello Frends,
We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible -
1. Goods Receipt in Inbound Delivery - Transaction VL32N : In this transaction,ssytem allows goods receipt for complete quantity but not for partial quantity
2. Goods Receipt reference to Inbound Delivery - Transaction MIGO : In thsi transaction, there is a provision to generate partial goods receipt however system not updating the status in inbound delivery document.
In this regard, requesting your support on what is possibility to fulfill our requirement, is there any standard SAP approach for this.
Appreciate your support. Thanks
Best Regards,
Goutham

Hi,
Thanks for your quick reply..
I have a outbound delivery with 100 EA, now system automaticallly generates a Inbound delivery for 100EA using output message. Now we need to generate partial goods receipt for the inbound delivery, mean first 20, then 40 and the remaing.
What are the best practices available since when I check from the Inbound delivery,we cannot make partial goods receipt.
Best Regards,
Goutham

Missing Goods receipt for inbound using VL32N

Hello All:
An inbound was posted into our system (version ECC 6.0) as complete, but the goods receipt shows a zero qty. and value. I have traced the error that caused this to the value missing on the material master & also the conversion for units of measure was missing for the qty. they entered on the inbound.
I have attempted to reverse the Goods receipt but get the error "Qty and / or "delivery completed" ind. or final issue ind. are missing
Message no. M7264"
With the Diagnosis listed as:
Diagnosis
The quantity and inward delivery completed or final issue indicator are missing for an item, for which a goods movement should be posted via the function module MB_CREATE_GOODS_MOVEMENT.
My goal is to either reverse this or complete the GR with qty and value within the delivery. Any advice or help would be greatly appreciated.
Best regards,
Laura

HI ALL,
I am also facing the same issue. Can any one please help me in this issue.
Regads,
Pavan

Goods Receipt for Inbound Delivery before Transfer Order

Hello Experts,
Below is the normal process in case of GR via inbound delivery.
PO -> Inbound Delivery -> TO -> Confirm TO -> Post Goods Receipt in Delivery.
My client wants as per the normal Purchase Order cycle as below.
PO -> Inbound Delivery -> Post goods receipt in Delivery -> TO - > Confirm TO.
I have found some config for this as per below path.
Logistics - General -> Handling Unit Management -> Basics -> Delivery -> Define Sequence of Transfer Order - Goods Receipt.
I have done these settings but still it is not working.
I have couple of questions here.
1. Are there some more settings required?
2. Why SAP has designed this process in such a way for inbound delivery.
Thanks in advance for your help.
Navin

Hi,
I am working with non HU managed storage location. Can I still use this settings & process for inbound delivery?
I am stuck with one more question. SAP is not allowing me to create Inbound delivery for QM active materials.
The message it is saying is ....
Material CH-1440 1000 cannot be used in inbound delivery because QM is active
Message no. L9528
Diagnosis
QM is active for material CH-1440 in plant 1000. As a result, the material cannot be used in an inbound delivery item because the item is relevant for picking and because WM is active for the item.
This process is not supported in the current release.
Procedure
Execute the putaway using a goods receipt posting with subsequent
putaway in the Warehouse Management system.
Can you please help me with this one also?

Post Goods Receipt for Inbound Delivery with BAPI_GOODSMVT_CREATE

Hello,
I try to post GR for an Inbound Delivey with BAPI_GOODSMVT_CREATE and it is not working.
I know delivery number and PO number and give both to the bapi.
I am not sure how to set the movement indicator in the item.
When I set it to B.
I do get a shortdump from MB_POST_GOODS_MOVEMENT numer 143, stating that this type of movement is not allowed with this transaction
when setting to L I do get an error stating
"Update control of movement type is incorrect (entry 101 X X _ L)" from message class M7.
Below is the coding for it.
Thank you very much for your help
Michael
* Füllen der Kopfdaten
ls_gm_header-pstng_date = sy-datum.
ls_gm_header-doc_date = sy-datum.
ls_gm_header-ref_doc_no = delivery_header-lifex.
ls_gm_header-bill_of_lading = delivery_header-bolnr.
ls_gm_header-gr_gi_slip_no = delivery_header-xabln.
ls_gm_header-pr_uname = sy-uname.
ls_gm_header-ref_doc_no_long = delivery_header-lifex.
ls_gm_header-bill_of_lading_long = delivery_header-bolnr.
lv_gm_code = '01'.
* Füllen der Positionsdaten
LOOP AT selected_delivery_items INTO ls_delivery_item.
    ls_gm_items-material          = ls_delivery_item-matnr.
    ls_gm_items-plant             = ls_delivery_item-werks. "             0001
    ls_gm_items-stge_loc = ls_delivery_item-lgort.
    ls_gm_items-move_type ='101'. "101
    ls_gm_items-entry_qnt                      = ls_delivery_item-lfimg. "          10,000
    ls_gm_items-entry_uom                      = ls_delivery_item-vrkme.
    ls_gm_items-po_number                      = ls_delivery_item-vgbel. "55001582
    ls_gm_items-po_item                        = ls_delivery_item-vgpos. "00010
    ls_gm_items-mvt_ind = 'B'.
    ls_gm_items-expirydate = sy-datum + 30 .
    ls_gm_items-deliv_numb = ls_delivery_item-vbeln.
    ls_gm_items-deliv_item = ls_delivery_item-posnr.
    APPEND ls_gm_items TO lt_gm_items.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header               = ls_gm_header
      goodsmvt_code                 = lv_gm_code
*     testrun                       = 'X'
*   GOODSMVT_REF_EWM              =
   IMPORTING
     goodsmvt_headret              = ls_gm_header_ret
     materialdocument              = lv_mat_docno
     matdocumentyear               = lv_mat_year
    TABLES
      goodsmvt_item                 = lt_gm_items
     goodsmvt_serialnumber         = lt_gm_serial_numbers
      return                        = lt_return
if lt_return is INITIAL.
endif.

Hello Pranav,
the input for the business data is correct.
When performing the goods receipt with Migo it works.
I think the B in the movement indicator is correct, but there might be something wrong with the other data.
Best regards
Michael

Goods Receipt for Inbound Delivery through MIGO

Hi All,
Can anyone pl. explain me in steps the process of GR for Inbound Delivery from MIGO transaction.
Also I need the process of reversing this goods receipt done.
For certain inbound deliveries a dump occurs in the program SAPLIE01 in 'EQUIPMENT_ADAPT_BUSVIEWS' fn module.
I need to analyse the reason for the dump. Here is the extract from the dump
<b>IF WA_EQUI IS INITIAL
keine Equidaten vorhanden => EXCEPTION
---> RAISE ERR_ADAPT_BUSVIEWS . ENDIF. </b>
Advance Thanks

Hi Sanjay and Srikanth,
Thank you for the correction. I was just wondering over this number.
Sanjay, regd the release level, it is 0017 for SAP_APPL.
In brief, when GR is done for an inbound delivery, a fn moudle equipment_adapt_busviews is called, in which if the equipment data of the material (wa_equi) is initial, it gives dump.
1. This fn module is called 3 or 4 times while the posting is done through MIGO
2. In the 4th call, the parameter wa_equi is initial - which gives the dump.
3. While debugging, when I reach this point,if I restart the debugging, I find that the posting is completed !!!! (so something happening after posting of GR gives the dump)
4. I have to reverse this GR for replicating the same again.
Any further clues !!
Regards
Aadarsh

No goods receipt for inbound delivery

Hi,
i am posting a goods receipt through VL32n against the inbound delivery EL . The item category is ELN . The document flow is updated as confirmation of service done . But the inventory does not change and neither any material document is posted . If I post a MIGO against the inbound delivery , the po history is updated with material docment number . Please let me know why I am not able to post the goods receipt through VL32n.
Regards,
Amol

Hi Dhas,
Inbound delivery is nothing but the only and on;y confirmation from vendor or you can say its just the goods from vendor entered in our premises.
So actual quantity check is done before MIGO.
Here in MIGO is the final confiramation of goods receipt where all aacounting entries are passed on and inventory along with value is updated in your system.
Hope you will understand in doubt pls revertr back.
Thanks and regards
Gitesh

Inbound IDoc MBGMCR02 Goods receipt for delivery status 51 Reference Docume

Hello IDoc experts,
I try to do a goods receipt for an inbound delivery using inbound IDOC MBGMCR02.
The inbound delivery is linked to only one PO, and the bill of lading number in the delivery is unique.
Still I get the following error message:
Reference Document Number is existing at more then one Purchase Order!
The inbound delivery is linked to only one PO, and the bill of lading number is unique
These are the fields I fill:
E1EBP2017_GM_HEAD01
        PSTNG_DATE: '20100421
        DOC_DATE:   '20100421'
        REF_DOC_NO: 180000008 (number of the inbound delivery)
        BILL_OF_LADING: 4500001992 (I have put the PO number in the bill of lading number in the delivery)
E1EBP2017_GM_ITEM_CREATE
        MATERIAL: CH0463COEUR\1 (material number of the first item of the delivery)
        PLANT: ST01
        STGE_LOC: 0001
        MOVE_TYPE: 101
        VENDOR: 100080
        ENTRY_QNT: 100
        ENTRY_UOM: PCE
        ENTRY_UOM_ISO: PCE
        PO_PR_QNT: 100
        ORDERPR_UN: PCE
        ORDERPR_UN_ISO: PCE
        PO_NUMBER: 4500001992
E1EBP2017_GM_ITEM_CREATE1
        DELIV_NUMB: 180000008
        DELIV_ITEM: 10
Do you guys have any idea where I go wrong?
Kind regards,
Rudy Zijp

I hope you filled the moment typ indicatior E1BP2017_GM_ITEM_CREATE.MVT_IND to 'B'.
and E1BP2017_GM_CODE-GM_CODE to '01 and for Bill of lading field also pass delivery nymber.
please try with these inputs.
Regrds,
Suresh
Edited by: Suresh Reddy Avutu on Apr 29, 2010 4:40 PM

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

How to post good receipt for an inbound delivery with HU in the stock?

Hello,
We have an inbound delivery of a purchase order with 10 Handling Units inside on.
The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery.
Due to this it's not possible to post good receipt for the inbound delivery, and the available stock quantity is in minus on zone: '902-GR Area External Rcpts' since the handling units are already in a storage bin.
Can anyone help me on this matter?
Thanks

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Doing a goods receipt for a customer material that is ASEQ status

We are needing to find a way to be able to do a goods receipt for a child part in ASEQ status. Most of our customers will send in their part after disassembling it themselves. Since we can not receive the part our present process is to dismantle so the system status changes to ESTO and we can receive. The problem with this is that the end user forgets to assemble the part back and we end up breaking the linkage.
We have looked into using User Status in the equipment master and have configured that. However the user status button, nor name shows up in the equipment master. I have looked at the field selection in IMG and it is not hidden. I am assuming it is being supressed by a user exit we have.
Can anyone give me any suggestions on how we can improve the process using SAP for material that is ASEQ status and being able to create an inbound delivery so we can receive in our warehouse for this status without dismatling the unit?
We are on ECC

Hello Kimberly
You lost me while describing your current process, so please provide more details as to how you dismantle and reinstall etc. Also how the part goes back to the customer.
However I can provide you clarifications to some questions you raised..
You see both system and user statuses in the field 'Status' itself. This is the 3rd row in the Equipment display screen under Equipment number and Description. If you see carefully you will see 2 sections, the one on left is system status and the one on right is User status. If you click on the i (info) icon, you will be taken to a screen where you see more info like status and business processes etc.
ASEQ is a system status and it is determined by what you did ( example dismantling) and can't be changed by you (user). If you see the 'Business Processes' tab, you will also see the this won't allow assignment to a Delivery and so on. So my point is having a user status will not help you. Based on the combination of system and user statuses, some processes are permitted, some not. For example if Goods Receipts are allowed, may be you can receive without an Inbound delivery. I am mentioning this as a thought initiator, I know you will have a Return/Repair order process including a return delivery.
I guess you have to systematically prevent the user from doing whatever they are doing out of turn, e.g., forgetting to reassemble (install?) and for this User statuses can help.
Let us know your process more in detail and I am sure SAP will have a standard way to receive a child part of a big assembly. Other members will share their practices also.
Take care.

Transaction BORGR: No tolerance on goods receipt for Kanban calloff

Hello,
we have the following situation:
- MM scheduling agreement with tolerance of 10% for under and overdelivery, production supply "summarized JIT call" is set.
- KANBAN cycle has 1 empty container with a summarized JIT call for replenishment, quantity 10 pieces.
- ASN has been created with BORGR transaction, it contains: 1 line item for the material with delivery quantity 9 pieces, assigned to this line item is the JIT call with notified quantity 9 pieces as well.
My expectation was that the JIT call can be booked with 9 pieces as it is inside the 10% tolerance defined for the scheduling agreement. In addition, I expected the KANBAN container be set to full.
Instead, the following error message is given:
'Post GR' carried out without success
(Message no. BORGR215)
Because of previous error, dispatching is not possible for ID 0180573431
(Message no. /SPE/ID_HANDLING011)
Inbound Delivery 0180573431 00010
(Message no. BORGR210)
Total of the summarized JIT calls does not match the current delivery qty
(Message no. BORGR540)
Changing the delivery quantity and the notified JIT quantity to 10 pieces, the goods receipt is booked correctly.
I only found the following notes that deal with tolerances but they are outdated, as we are using DIMP release 603:
https://service.sap.com/sap/support/notes/393421
https://service.sap.com/sap/support/notes/508215
Has anybody faced a similar problem or can help me with this?
Thanks!

Hello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks

Goods Receipt for Inbound HU - WS_DELIVERY_UPDATE

Similar Messages

Maybe you are looking for