Google Earth draining battery??

I have had amazing battery life with the IP4 until I downloaded google earth.
The most it would drain prior to google earth was from 100% in the am to 75% at the lowest by 7:00pm after a full days use.
After the install it dropped to 35% by 7:00pm. That was with the app running in the background.
Last night I stopped it from running in background and today it's back to normal.
Anyone else experience this?

I've also noticed certain apps (e.g. Google Earth, GPS Drive) draining battery charge noticeably when left running in the background. And I've been obsessive about "closing" all the background apps whenever possible, leaving behind only those which I know I need for multitasking. As much as I love multitasking with my iP4, since each and every app once started stays around until intensionally removed, it is becoming an issue for me. Perhaps other folks may have a word of wisdom on this topic.

Similar Messages

  • Maverick drains battery of MacBook Air Mid13

    I was working really fine with Lion, however I decided to move to Maverick because there are many good points.
    Once, I was starting with Maverick my new MAcBook Air middle 2013 drain all nights its battery, on sleep mode. I tried to reset the PRAM, without succes.
    Any idea, what is going on with Maverick and MacBokk Air Mid 13??
    My Mac is a MAcBook Air, 13-inch, Mid 2013
    Processor  1.7 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Software  OS X 10.9.1 (13B42)
    When I pront in terminal
    pmset -g log
    I get next:
    2/17/14, 11:43:54 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe000008ef [System: No Assertions]             
    2/17/14, 11:43:54 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:87%)                                      45 secs  
    2/17/14, 11:43:54 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:43:54 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28217 ms     
    2/17/14, 11:44:39 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe000008ef [System: No Assertions]             
    2/17/14, 11:44:39 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:87%)                                     47 secs  
    2/17/14, 11:44:41 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1864 ms      
    2/17/14, 11:45:08 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28138 ms     
    2/17/14, 11:45:08 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:45:26 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe0000090f [System: No Assertions]             
    2/17/14, 11:45:26 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:87%)                                      45 secs  
    2/17/14, 11:45:26 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:45:26 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28208 ms     
    2/17/14, 11:46:11 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe0000090f [System: No Assertions]             
    2/17/14, 11:46:11 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:87%)                                     48 secs  
    2/17/14, 11:46:13 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1671 ms      
    2/17/14, 11:46:40 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28147 ms     
    2/17/14, 11:46:40 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:46:59 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe00000938 [System: No Assertions]             
    2/17/14, 11:46:59 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:87%)                                      45 secs  
    2/17/14, 11:46:59 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:46:59 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28216 ms     
    2/17/14, 11:47:44 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe00000938 [System: No Assertions]             
    2/17/14, 11:47:44 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:87%)                                     49 secs  
    2/17/14, 11:47:46 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1853 ms      
    2/17/14, 11:48:12 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28149 ms     
    2/17/14, 11:48:12 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:48:33 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe00000958 [System: No Assertions]             
    2/17/14, 11:48:33 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:86%)                                      45 secs  
    2/17/14, 11:48:33 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:48:33 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28220 ms     
    2/17/14, 11:49:18 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe00000958 [System: No Assertions]             
    2/17/14, 11:49:18 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:86%)                                     45 secs  
    2/17/14, 11:49:19 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1615 ms      
    2/17/14, 11:49:46 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28128 ms     
    2/17/14, 11:49:46 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:50:03 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe00000982 [System: No Assertions]             
    2/17/14, 11:50:03 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:86%)                                      45 secs  
    2/17/14, 11:50:03 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:50:03 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28196 ms     
    2/17/14, 11:50:48 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe00000982 [System: No Assertions]             
    2/17/14, 11:50:48 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:86%)                                     49 secs  
    2/17/14, 11:50:50 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1759 ms      
    2/17/14, 11:51:17 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28112 ms     
    2/17/14, 11:51:17 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:51:37 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe000009a2 [System: No Assertions]             
    2/17/14, 11:51:37 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:86%)                                      45 secs  
    2/17/14, 11:51:37 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:51:37 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28181 ms     
    2/17/14, 11:52:22 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe000009a2 [System: No Assertions]             
    2/17/14, 11:52:22 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:86%)                                     45 secs  
    2/17/14, 11:52:23 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1562 ms      
    2/17/14, 11:52:50 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28148 ms     
    2/17/14, 11:52:50 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:53:07 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe000009ca [System: No Assertions]             
    2/17/14, 11:53:07 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:86%)                                      45 secs  
    2/17/14, 11:53:07 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:53:07 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28219 ms     
    2/17/14, 11:53:52 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe000009ca [System: No Assertions]             
    2/17/14, 11:53:52 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:86%)                                     43 secs  
    2/17/14, 11:53:54 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1819 ms      
    2/17/14, 11:54:20 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28138 ms     
    2/17/14, 11:54:20 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:54:35 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe000009eb [System: No Assertions]             
    2/17/14, 11:54:35 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:86%)                                      45 secs  
    2/17/14, 11:54:35 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:54:35 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28209 ms     
    2/17/14, 11:55:20 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:45  id:0xe000009eb [System: No Assertions]             
    2/17/14, 11:55:20 PM GMT Sleep                   Maintenance Sleep: Using BATT (Charge:86%)                                     47 secs  
    2/17/14, 11:55:22 PM GMT SlowResponse            PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                       1846 ms      
    2/17/14, 11:55:48 PM GMT Timedout                PMConnection: Response from CMacPowerHelper timed out (powercaps:0x0)                    28147 ms     
    2/17/14, 11:55:48 PM GMT WakeRequests            Clients requested wake events: None                                                     
    2/17/14, 11:56:07 PM GMT Assertions              PID 16(powerd) Created InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:00  id:0xe00000a15 [System: No Assertions]             
    2/17/14, 11:56:07 PM GMT DarkWake                DarkWake [CDN]  : Using BATT (Charge:86%)                                      39 secs  
    2/17/14, 11:56:07 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:56:07 PM GMT SlowResponse            Kernel: Response from powerd is slow (powercaps:0x0)                                     28216 ms     
    2/17/14, 11:56:46 PM GMT Wake                    DarkWake to FullWake [CDNVA] due to HID Activity: Using BATT (Charge:86%)               
    2/17/14, 11:56:46 PM GMT HibernateStats          hibmode=3 standbydelay=10800                                                             rd=1063 ms   
    2/17/14, 11:56:51 PM GMT Assertions              PID 16(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:44  id:0xe00000a15 [System: PrevIdle PushSrvc kCPU]             
    2/17/14, 11:57:18 PM GMT Assertions              PID 45914(AddressBookSour) Released PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:30  id:0x100000a2d [System: DeclUser kDisp]             
    2/17/14, 11:57:18 PM GMT Assertions              PID 230(UserEventAgent) Released BackgroundTask "com.apple.AddressBook.ScheduledSync" 00:00:30  id:0xc00000a2e [System: DeclUser kDisp]             
    Total Sleep/Wakes since boot at 2/15/14, 11:34:27 PM GMT :301
    2/17/14, 11:58:25 PM GMT Showing all currently held IOKit power assertions
    Assertion status system-wide:
       BackgroundTask                 0
       PreventDiskIdle                0
       ApplePushServiceTask           0
       UserIsActive                   1
       PreventUserIdleDisplaySleep    0
       InteractivePushServiceTask     0
       PreventSystemSleep             0
       ExternalMedia                  0
       PreventUserIdleSystemSleep     0
       NetworkClientActive            0
    Listed by owning process:
       pid 87(hidd): [0x0000000a00000a30] 00:01:31 UserIsActive named: "com.apple.iohideventsystem.queue.tickle"
        Timeout will fire in 277 secs Action=TimeoutActionRelease
    No kernel assertions.

    Thanks for your comments, here is my MAC details:
    Do you have another clue?
    Hardware Information:
              MacBook Air (13-inch, Mid 2013)
              MacBook Air - model: MacBookAir6,2
              1 1.7 GHz Intel Core i7 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 5000 - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 2 days 1:9:56
    Disk Information:
              APPLE SSD SM0256F disk0 : (251 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 250.14 GB (91.63 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.avast.PacketForwarder          (1.4 - SDK 10.9)
              com.avast.AvastFileShield          (2.1.0 - SDK 10.9)
              com.parallels.kext.usbconnect          (9.0 24172.951362)
              com.parallels.kext.hypervisor          (9.0 24172.951362)
              com.parallels.kext.hidhook          (9.0 24172.951362)
              com.parallels.kext.netbridge          (9.0 24172.951362)
              com.parallels.kext.vnic          (9.0 24172.951362)
              com.parallels.filesystems.prlufs          (2010.12.28)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.autodesk.backburner_manager.plist 3rd-Party support link
              [System] com.autodesk.backburner_server.plist 3rd-Party support link
              [System] com.autodesk.backburner_start.plist 3rd-Party support link
              [System] com.avast.init.plist 3rd-Party support link
              [System] com.avast.uninstall.plist 3rd-Party support link
              [System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
              [System] org.freedesktop.dbus-system.plist 3rd-Party support link
              [System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
    Launch Agents:
              [System] com.avast.userinit.plist 3rd-Party support link
              [System] com.cisco.anyconnect.gui.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
              [System] org.freedesktop.dbus-session.plist 3rd-Party support link
              [System] org.macosforge.xquartz.startx.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.avast.home.userinit.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
              AdobePDFViewer: Version: 10.1.9 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
    3rd Party Preference Panes:
              avast! Preferences  3rd-Party support link
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
              TeXDistPrefPane  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 232.96 GB Disk used: 147.63 GB
              Destinations:
                        MCAMPO [Local]
                        Total size: 884.82 GB
                        Total number of backups: 10
                        Oldest backup: 2013-11-19 10:21:59 +0000
                        Last backup: 2014-02-13 14:42:27 +0000
                        Size of backup disk: Excellent
                                  Backup size 884.82 GB > (Disk size 232.96 GB X 3)
                        UPNA_MAC [Local] (Last used)
                        Total size: 931.51 GB
                        Total number of backups: 10
                        Oldest backup: 2013-12-20 11:24:09 +0000
                        Last backup: 2014-02-17 17:41:33 +0000
                        Size of backup disk: Excellent
                                  Backup size 931.51 GB > (Disk size 232.96 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   5%          MATLAB_maci64
                   2%          EtreCheck
                   2%          WindowServer
                   1%          prl_disp_service
                   0%          notifyd
    Top Processes by Memory:
              188 MB          Safari
              106 MB          MATLAB_maci64
              90 MB          Mail
              57 MB          prl_client_app
              49 MB          Finder
    Virtual Memory Information:
              3.48 GB          Free RAM
              1.92 GB          Active RAM
              1.35 GB          Inactive RAM
              809 MB          Wired RAM
              5.93 GB          Page-ins
              1 MB          Page-outs
    A

  • IOS 8 SEVERELY draining battery on iPhone 5

    Is there any way to fix it??
    My Home/Lock screen racks up 47% of my battery usage since updating, while the background/app refresh, location services, and other features that drained battery in iOS 7 are turned off.
    My battery has gone down by 5% within just 10 minutes of my phone sitting there, having absolutely nothing done to it.
    Whenever I click the home button after about a minute or so, it goes down by a percent (sometimes two).
    So my phone isn't even going to last me an hour of usage after this "upgrade"?

    As much as I love getting a new gadget, I respect our environment more. So I'm holding on to my iPhone 5, 16GB because it's worked so well for the last 2 years and is still going strong. I charge it every night and at the end of the day I usually have 20% battery left. But that was before the iOS 8.0.2 update...
    Now my phone lasts 4 hours and over heats. It died 3 times yesterday with normal use. The only variable is iOS 8.0.2
    I looked up forums and found "tips" that are more like work-arounds. I tried resetting all settings which didn't work. All it did was give me annoying settings like 2 reminders for one SMS, location services off, and I lost my favourite lock screen photo of my two children (even though it said "no data or media will be lost"  ).
    I checked the settings for apps that are using most battery. Phone and lock screen are the top two. Lock screen?? Seriously??
    I remembered that when I use GPS apps (ie. TomTom or Google Maps), the phone (just feels like any other "phone" now without the "i") would heat up in the same way it does now. So I snooped and found a little switch hidden deep, deep down in Settings > Privacy > Location Services > System Services (scrolled down to the very, very bottom) and there was a switch for Status Bar Icon. I turned this ON and paid attention. It would turn on by itself on the lock screen. I thought that maybe Siri is using it? So I went into Settings > Privacy > Location Services and turned Siri's location access OFF.
    The phone cooled down almost instantly. I'm charging it now and will update below on how I go, if anyone's interested...
    Let me know how you go with this?

  • Heating Up & Draining battery fast on iPhone 5s after iOS 7.1 update

    Hi,
    I updated my iPhone 5s 64GB to iOS 7.1 & it's heating up and draining battery so fast not to mention when I charge it , it takes longer time to charge!
    I didn't have this issue before on the previous version. I tried restoring my iPhone two times & also rebooting my iPhone five times, but nothing works!
    I've looked in other complaints and some of them suggested to switch off background app refresh and locations!
    I didn't have this issue before and I won't turn them off because if the problem because of it then I should experience the same problem on the previous version and why would I turn it off? So what's the purpose of the phone?
    My wife, my sister, my brother & my mom they got an iPhone 5 and they don't experience this problem except me!
    My iPad Air and my wife iPad Mini 2( Retina Display) and there is no problem with the iOS 7.1 .
    I've looked in other websites and found that there are other people experiencing the same problem. Apple should fix this problem ASAP!
    Is there anyone experiencing the same problem and what did he/she do to fix it incase he/she fixed it !

    I don't have any issues with my 5S on 7.1
    Have you actually taken your phone to the Apple store and have them look at it?
    Even if you don't want to turn off background app refresh,  you should turn it off and see what the results are.
    also you said you restored twice, did you restore as NEW?

  • Yoga 2 Pro Draining Battery Fast in Sleep Mode

    I have a new Yoga 2 Pro with i7 processor. It works great and normal battery life is about 4-5 hours. But with a fully charged battery, i can close the lid at night triggering sleep mode, and wake up to an almost dead battery.
    Why is this happening? It's really dissapointing and I'm going to return it if I can't find a fix. I'm on the latest BIOS with all current updates. I am not using Hibernate mode.
    Closing the lid shoud not cause battery to continue to drain at normal usage rates.
    I'm hoping it's the WINDOWS 8 software but I've tried all the settings I can find.

    the OP said battery was draining overnight because y2p was not going into sleep mode. then op changed some settings and, as i understand it, now his y2p does not drain battery overnight because he pushes power button and it goes into hibernate mode before closing lid.
    I would like to raise the issue of the difference between hibernate and sleep mode. I too find that if i put my y2p (and my mbp-bootcamp) into hibernate mode then my battery does not drain overnight. however, both my laptops drain the battery overnight in sleep mode... anyone have clear understanding of this? i've look at many articles on the web, but haven't found any that specifically indicate how fast sleep mode should drain batteries. I think my gf's mba-OSx also drains overnight in sleep mode and OSx doesn't even have a hibernate option (correct me if i'm wrong)... 

  • Where did Google Earth go when I upgraded to the latest version of Firefox?

    I clicked the popup that upgraded to the latest version of Firefox - and clicked to give it permission to make changes to my computer - and my Google Earth was no longer there. I restored my computer to before I had made the Firefox changes and my Google Earth was there but I got a blank page when I tried to open Firefox. Then I re-downloaded Firefox and Google Earth is gone. I would like to have both. If I have to do without one I would give up Firefox and use Internet Explorer until the problem gets fixed.

    ''andy_blunden [[#question-1057157|said]]''
    <blockquote>
    When I drag messages from the Inbox to another folder for archiving, they don't move. This problem has only arisen since I updated to the latest version of Thunderbird.
    </blockquote>
    I doubt it is a Norton Security problem. Maybe. I solved it by deleting the account and re-installing it.

  • Google Earth Plugin and LabVIEW: High CPU usage when adding placemarks

    Hi,
    I posted this question on stackoverflow earlier this week but feel it might be better suited to the LabVIEW community specifically so I'm reposting here:
    I'm writing an application which uses the Google Earth Plugin to display events on the globe. Each event is a single point kml placemark with an icon which is a 3kb png file. Placemarks are uploaded to the plugin as they are received by the software. I am experiencing increasing CPU usage with the number of placemarks that are added.
    I have tested displaying a new placemark every second and running until the software running the plugin completely froze (graph attached). The GEPlugin (green trace) stopped responding (i.e. the globe did not respond to the mouse) at around 1200 placemarks added and CPU usage was at ~30%. When the software itself (red trace) froze the plugin was using around 50% CPU and ~3700 placemarks had been added). After the freeze, no new placemarks were added which caused the software to respond (but not the plugin) so I could clear all the placemarks. After the placemarks were cleared from the globe, the CPU usage of the plugin returned to around 5% CPU.
    So what I've seen is that GEPlugin CPU usage increases linearly with each kml placemark added. Is this the expected behaviour/ a normal limitation of the plugin? If not is there a more efficient way of adding many placemarks to the globe?
    I am using GEPlugin version 7.1.1.1580 (API version 1.010) and LabVIEW 12.0f3
    Please see the test results attached. Any input greatly appreciated!
    Original stackoverflow post:
    http://stackoverflow.com/questions/20994323/google-earth-plugin-with-labview-high-cpu-usage-when-add...
    Attachments:
    Performance Log 020114_095115.png ‏82 KB

    Hello,
    I have had a look at your graphs and understood what you are trying to do. To me it seems that as the image gets more complex it gets harde to render which wold likely cause increase in CPU usage resulting in the freeze. I would suggest you try running the program on anoher computer to check on the RAM front of things. If this is a limitation of the GE Plugin then unfortunately I can not do much to help, but if you think this is a problem coming from your LabVIEW code then you can post your code here and I can take a look.

  • How do I export an album from the iPhone Photos app in a form that retains location information so I can import it to ArcMap or Google Earth?

    I have an iPhone 4S with OS 5.1 installed and I have taken several hundred photos that are geotagged and that show up in the Places page in the Photos app. These were taken for field work and have data in them that we want to use to tie information in the photos to locations in a GIS application. Therefore I would like to be able to export the mapped locations along with the photos in a way that would allow me to upload the locations to ArcMap or to Google Earth. I know that the individual photos have location information but the process of uploading them to Panoramio one at a time is labor-intensive, whereas I can take an entire album in the Photos application and quickly display locations tied to photos on the screen.
    Also these photos were taken before I enabled iCloud on my iPhone and I'm wondering how to upload them even though they were taken previously. When I go into the "share" menu my only options are email, tweet, message, and print. I'd like to send the whole album to iCloud so I can at least bring it back into applications on my Macbook Pro.
    Does anyone have a recommendation as to how I can go about doing either of these things?

    This is something that I want to do as well. I'm new to applescript, but I found this script:
    http://www.bagelturf.com/aparticles/tips/tipprint/index.php
    Go to about half way down the page. The script works well, but I'd like to change it so that I only export Versions w/ a specified "main rating" (or greater than a minimum rating)
    If you look at the script, there's a line:
    "set theimages to every image version as list"
    FYI: "image version" is an Aperture class that represents an image version. "main rating" is a property of "image version"
    Is there a way to modify this applescript statement to spec only those "image versions" that meet a min "main rating"? I tried a bunch of things, and none of them compiled. (I need to learn Applescript)
    If not, then how could this be done w/ a little loop in Applescript?
    Thanks for your help!

  • Google earth and google earth plugin not working on

    Hi,
    I have a macbook 2006 with Intel GMA 250 and OS 10.6.8, and I cannot manage to make google eart work properly, nor google earth's plugin on safari, firefox, or google chrome. It worked fine previously, but stoped at a certain point (since several months). I have reinstalled the plugin several without success. I also tried troubleshooting from google earth, without success. 
    Does anyone experiencing the same problem knows how to solve it?
    Thanks
    THibaut

    More information would be great.
    What type of site is it?  WordPress?  Joomla or Drupal?
    What drag and drop theme or framwork are you using?
    What version of software and theme, what type of hosting, what version of PHP and mySQL?
    I'm having similar issues but details such as these will go a long way to grouping symptoms and getting to the bottom of the problem(s).
    One thing I've noted is that in most cases everything is actually working.  It's just taking an unbelievably long time.  jQuery isn't the problem either.  It seems more closely related to the quantity of available tasks on a given page.
    There are forum posts for v7 that say Safari isn't compatible with WordPress for example.  It is compatible and works just fine, but if you're running the latest version of Catalist Theme and their Dynamic Site Builder you can't do anything with Dynamic admin because all its options are on a single page which appears to be too much for Safari 7 to handle for some reason.  Folks are having similar problems with Genesis, Headway Theme, Pagelines and many others.

  • [ISSUE FOUND] Help Request Stabilizing Google Earth 7.1

    Good Morning Fellow Archers,
    Arch is my main OS, I have a Windows 7 partition for Games (Skyrim).
    I am x86_64, running the 32bit libs, NVidia GTX-660 platform, with the "ck" kernel option for my Piledriver CPU with the associated "ck" nvidia modules. The system works very nicely. And I couldn't be happier with Arch as a distribution!
    I have started cycling in the last 7 months for health reasons, and in preparation for a disabled veterans Sea to Shining Sea ride in 2014 that I want to participate in (San Fran to Virginia Beach). I use Google Earth (G.E.) to map out various long-distance trails/paths locally to take as training runs with my riding partner.
    I use Google Earth in my Windows 7 partition because I cannot get Google Earth 7.1 running stably under Arch. And I openly acknowledge that the "path" section of G.E. is glitchy in and of itself....platform independent. I am OK with that.
    Yesterday, I followed some other threads and downloaded from the AUR. I installed the one package I needed, "ld-lsb", installed, and then did the usual "makepkg -s" for Google Earth. What it brought down was the x86_64 version of Google Earth, instead of the i386 version that I was expecting, mentioned on the AUR page.
    There was no resultant ".xz" package from which to do a "pacman -U". But the layout was kind obvious where to put things so I manually moved things around as indicated. There was a launcher script that came with the tarball that set environment variables and performed some font stuff before actually launching G.E.
    I launched G.E. using the included launching script from a cli, so I could observe what was going wrong. G.E. came right up, and the fonts did not look wierd as in previous releases. There are a lot of repetitive errors showing up in the cli, but G.E. at least runs.....until....You click on a photo or a place, add more than a few "nodes" to a "path". Instant crash, no signal traps, no nothing...it just vanishes into thin air. And it will not launch again until I restart my D.E. and/or "zap" the "X" server. I am assuming this is necessary to clear out some environment variables that are temporary in nature that the launcher script setup, although I do not know this for sure.
    I have included the copy-n-paste error trail from the cli at the bottom of this post.
    I have also attempted to install the Windows version under Wine to get around the issue, with no luck. The G.E. installer can't seem to find the internet conenction and dies. The wine-gecko app is installed, as I have one other Windows specific reference software package installed under Wine...that uses the network to update itself. It works just fine....telling me that my Wine install is OK.
    I see that others using Arch seem to have G.E. running stably......
    I am requesting assistance to get my G.E. installation stable as well. I have no idea where to start....
    Some assistance please?
    Sincerely and respectfully,
    Dave.
    //----------------Begin cut-n-paste of typical errors leading up to a crash------------------//
    [0514/101324:ERROR:net_util.cc(2195)] Not implemented reached in bool net::HaveOnlyLoopbackAddresses()
    [0514/101325:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
    [0514/101325:ERROR:nss_ocsp.cc(581)] No URLRequestContext for OCSP handler.
    Last edited by dcbdbis (2013-05-15 01:54:26)

    I did one more test......
    I rebooted with the stock Arch kernel and stock modules for NVidia......The issue remains. The problem is not specific to the "ck" kernel series and their associated video modules.
    One more tidbit...I am running pure systemd.......and 16Gb of ram that memtest86 "blesses". And I am not overclocked in any way. The AMD Piledriver (bulldozer Rev II) doesn't need it at all...and I don't like pushing things anyway. I use the "ck" kernels because I can get them compiled specifically for my CPU and I do notice significant responsiveness gains. A Thank You is in order to graysky for providing these kernels.
    Dave.
    Last edited by dcbdbis (2013-05-14 16:29:14)

  • Error message for google earth

    I get getting error message when I try to use "Google Earth" The message is 'See file PPC errlog' for all printout messages for this application" How can I fix this?

    Ha!  I fixed it dammit!
    I read dozens of posts all over the web with no fix, so I hope this helps folks.
    I downgraded from v.7 to v.6 (which is a little tricky to do).  Trash v.7.
    Then when get to this webpage:  http://www.google.com/earth/download/ge/agree.html
    Click Customize and choose Previous Version 6.2.  Install that.
    Then (as others have written) turn off internet access.  Open Google Earth.  Go into Preferences and turn off "show startup tips" under the General tab.  Quit Google Earth.  Turn internet back on.
    Startup Google Earth v. 6. 
    Seems to work.
    {arrggggg. worked for a minute, then error msg recurred.  better than before when it did not work at all, i guess}
    Message was edited by: tritoniadiomedea

  • [SOLVED] Google Earth doesn't work with xf86-video-ati

    Hi all,
    I'm having a problem with the open-source ATI drivers.  I haven't had much luck finding out anything from anywhere else, so I'm hoping someone here can help.
    Whenever I start Google Earth, the graphics run EXTREMELY slowly, almost as if it's running on a system with low memory.  I'm running an Acer Extensa 4420 with an AMD Athlon 64 X2 dual-core 64-bit processor with 2GB of RAM.  As mentioned before, I'm running on the open-source xf86-video-ati drivers, but this is the only app that gives me problems.  GL screensavers run fine, and glxgears runs without any significant input.  Running Google Earth in terminal also gives no output. 
    And I'm not sure if this is related, but closing Google Earth also crashes X.
    Here's xorg.conf:
    Section "Module"
    Load "extmod"
    Load "dbe"
    Load "record"
    #Free86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    Load "dri"
    Load "drm"
    Load "synaptics"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    Option "DontZap" "no"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    Option "AutoAddDevices" "False"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "acer_laptop"
    Option "XkbLayout" "us,de"
    Option "XkbOptions" "grp:lwin_switch,grp_led:num,eurosign:e"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    #Option "Device" "/dev/input/mice"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "false" # configurable at runtime? security risk
    Option "LeftEdge" "1700" # x coord left
    Option "RightEdge" "5300" # x coord right
    Option "TopEdge" "1700" # y coord top
    Option "BottomEdge" "4200" # y coord bottom
    Option "FingerLow" "25" # pressure below this level triggers release
    Option "FingerHigh" "30" # pressure above this level triggers touch
    Option "MaxTapTime" "180" # max time in ms for detecting tap
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
    Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
    Option "CoastingSpeed" "0.30" # corner coasting speed
    Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
    Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
    Option "MinSpeed" "0.10" # speed factor for low pointer movement
    Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
    Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
    Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
    Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Acer Laptop"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5 - 57.0
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-90
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "ATI Radeon"
    Driver "radeon"
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    Option "AGPFastWrite" "yes"
    Option "EXAVSync" "yes"
    Option "ForceTVOut" "true"
    Option "TVStandard" "ntsc"
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "ATI Radeon"
    Monitor "Acer Laptop"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1200x800"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Here's my drirc:
    <driconf>
    <device screen="0" driver="r300">
    <application name="Default">
    <option name="force_s3tc_enable" value="false" />
    <option name="texture_coord_units" value="8" />
    <option name="fthrottle_mode" value="2" />
    <option name="disable_stencil_two_side" value="false" />
    <option name="tcl_mode" value="3" />
    <option name="texture_depth" value="0" />
    <option name="fp_optimization" value="0" />
    <option name="def_max_anisotropy" value="1.0" />
    <option name="no_rast" value="false" />
    <option name="command_buffer_size" value="8" />
    <option name="round_mode" value="0" />
    <option name="dither_mode" value="0" />
    <option name="disable_lowimpact_fallback" value="true" />
    <option name="texture_image_units" value="8" />
    <option name="disable_s3tc" value="false" />
    <option name="color_reduction" value="1" />
    <option name="vblank_mode" value="1" />
    </application>
    <application name="Google Earth" executable="googleearth">
    </application>
    </device>
    </driconf>
    Last edited by coolpyrofreak (2009-07-03 05:56:18)

    I had the same problem (slow googleearth) with ATI Technologies Inc Radeon Mobility U1 (IGP 320m).
    This .drirc solves it. I don't have an xorg.conf.
    - no need for the 'disable_lowimpact_fallback' option
    - no need to turn off 'atmosphere'
    cat .drirc
    <driconf>
    <device screen="0" driver="radeon">
    <application name="Default">
    <option name="force_s3tc_enable" value="false" />
    <option name="no_rast" value="false" />
    <option name="fthrottle_mode" value="2" />
    <option name="tcl_mode" value="3" />
    <option name="texture_depth" value="0" />
    <option name="def_max_anisotropy" value="1.0" />
    <option name="no_neg_lod_bias" value="false" />
    <option name="texture_units" value="3" />
    <option name="dither_mode" value="0" />
    <option name="hyperz" value="true" />
    <option name="round_mode" value="0" />
    <option name="color_reduction" value="1" />
    <option name="vblank_mode" value="0" />
    <option name="allow_large_textures" value="1" />
    </application>
    </device>
    </driconf>

  • My iPad 2 is only 7 months old and is draining battery life quickly some days and others shutting off at 40% - 50% and when I turn the iPad back on it keeps turning it self off continuously. I have a feeling the battery could be faulty, what do I do?

    My iPad 2 is only 7 months old and is draining battery life quickly some days and others shutting off at 40% - 50% and when I turn the iPad back on it keeps turning it self off continuously. I have a feeling the battery could be faulty, what do I do?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Problems w/MS Office 2008 & Google Earth Ever Since Snow Leopard "Upgrade"

    I probably should have checked this forum before taking my son's advice to upgrade from 10.5 to 10.6. Ever since this upgrade, I've had repeated and frustrating problems with two applications: MS Office 2008 for the Mac and Google Earth for the Mac.
    Note that I did an "in-place" upgrade from Leopard to Snow Leopard, i.e., I inserted the installation DVD into my iMac and then double-clicked on "Install Mac OS X".
    Office 2008: Ever since the Snow Leopard upgrade, MS Office 2008 has been crashing. Typically, it's Entourage crashing when a crash does occur because that's the office app that I run 95% of the time. However, whenever Entourage crashes and I try to launch Word, Excel, or PowerPoint, they won't launch either... The icons will bounce a few times in the dock but won't run. (The Entourage crash is the only Office App that actually generates a crash window.) Note that there are two identities configured on my iMac, both of which which use Entourage. The key thing about this situation is that when the Office 2008 crash does occur, restarting the iMac ALWAYS resolves the problem until the next time a crash occurs. I've tried to determine what combination of events, i.e., apps open/being used in either/both identities, etc. is the trigger, but I can't find anything obvious. Sometimes I can use the iMac for a whole day without a crash, but that's unusual. If Entourage is left open in both identities, maybe a couple of days will pass without a crash, but invariably it happens again, and then it's reboot time again. In cases where Entourage is left running (in one or both identities), we will still eventually get a crash in one of them if one of us tries to open a WinWord attachment (with a "Not enough memory to run Word" error). If at that point I close Entourage and try to restart it, it crashes. I've tried everything I could find on the Office for the Mac forums, including deleting duplicate fonts, doing a safe start-up, fixing disk permissions via Disk Utility, zapping the PRAM, turning filing sharing off then on (including deleting everything listed in the Shared Folders section), logging out/logging back in, etc., all to no avail. One of the Office 2008 for the Mac forum contributors suggested that the problem was with my Snow Leopard Install, but then a contributor to another more general Apple forum blames Office for Mac. (This is exactly the sort of finger-pointing exercise that I'd hoped to avoid when I made the plunge from being a long-time Windows user to becoming an OS X user...; - )
    Google Earth: This just flat-out WILL NOT RUN ever since I upgraded to Snow Leopard. When I try to run it, it bounces in the dock for about a minute then just stops, staying fixed to the dock until I do a Force-Quit. (I don't have it permanently tethered to the dock since I only use it occasionally.) I've tried deleting/reinstalling, including Google Earth's suggestions to remove files from my identity's Google Earth folder in the Library folder, but no dice.
    My take on all of this is that despite all of Apple's advertising to the contrary, their OS (including updates to their OS) isn't necessarily as trouble-free/stable as their anti-Windows spots would have you believe. Sorry for this long post, but any help would be much appreciated.

    I left my system running all day in 64-bit kernel mode. (I left Entourage running the whole time.) Just now closed Entourage and tried reopening it. Same deal with Google Earth. They both crashed. Here's a screen paste of the entire Microsoft crash log for Entourage:
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXCBADACCESS
    Date/Time: 2010-01-29 16:28:12 -0500
    Application Name: Microsoft Entourage
    Application Bundle ID: com.microsoft.Entourage
    Application Signature: OPIM
    Application Version: 12.2.3.091001
    Crashed Module Name: EntourageCore
    Crashed Module Version: unknown
    Crashed Module Offset: 0x00015ef4
    Blame Module Name: EntourageCore
    Blame Module Version: unknown
    Blame Module Offset: 0x00015ef4
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Thread 0 crashed:
    # 1 0x0146cef4 in UContactUtils::GetMeContactID() + 0x00000014 (EntourageCore + 0x00015ef4)
    # 2 0x00028ac1 in _mh_executeheader + 0x00027AC1 (Microsoft Entourage + 0x00027ac1)
    # 3 0x00029df4 in _mh_executeheader + 0x00028DF4 (Microsoft Entourage + 0x00028df4)
    # 4 0x0002a439 in _mh_executeheader + 0x00029439 (Microsoft Entourage + 0x00029439)
    # 5 0x000191a4 in _mh_executeheader + 0x000181A4 (Microsoft Entourage + 0x000181a4)
    # 6 0x00019ace in _mh_executeheader + 0x00018ACE (Microsoft Entourage + 0x00018ace)
    # 7 0x0000264e in _mh_executeheader + 0x0000164E (Microsoft Entourage + 0x0000164e)
    # 8 0x00002575 in _mh_executeheader + 0x00001575 (Microsoft Entourage + 0x00001575)
    X86 Thread State:
    eax: 0x00000000 ebx: 0x0146ceec ecx: 0x00000002 edx:0xbffff39c
    edi: 0x29a3ced0 esi: 0x02620ac8 ebp: 0xbffff2c8 esp:0xbffff2b0
    ss: 0x00000023 eip: 0x0146cef4 cs: 0x0000001b ds:0x00000023
    es: 0x00000023 fs: 0x00000000 gs: 0x0000000f eflags:0x00010282
    Thread 1:
    # 1 0x93f900ea in _dispatch_hwconfig + 0x93DD3162 (libSystem.B.dylib + 0x000270ea)
    # 2 0x93f8fcc3 in _dispatch_hwconfig + 0x93DD2D3B (libSystem.B.dylib + 0x00026cc3)
    # 3 0x93f8fa68 in _dispatch_hwconfig + 0x93DD2AE0 (libSystem.B.dylib + 0x00026a68)
    # 4 0x93f8f4f1 in _dispatch_hwconfig + 0x93DD2569 (libSystem.B.dylib + 0x000264f1)
    # 5 0x93f8f336 in _dispatch_hwconfig + 0x93DD23AE (libSystem.B.dylib + 0x00026336)
    X86 Thread State:
    eax: 0x0000016b ebx: 0x93f9073e ecx: 0xb0080d5c edx:0x93f900ea
    edi: 0xa04131ac esi: 0xb0080ed8 ebp: 0xb0080ef8 esp:0xb0080d5c
    ss: 0x00000023 eip: 0x93f900ea cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000246
    Thread 2:
    # 1 0x93f8f182 in _dispatch_hwconfig + 0x93DD21FA (libSystem.B.dylib + 0x00026182)
    # 2 0x93f8f336 in _dispatch_hwconfig + 0x93DD23AE (libSystem.B.dylib + 0x00026336)
    X86 Thread State:
    eax: 0x00100170 ebx: 0x93f8f379 ecx: 0xb0102f6c edx:0x93f8f182
    edi: 0x02820418 esi: 0xb0103000 ebp: 0xb0102fc8 esp:0xb0102f6c
    ss: 0x00000023 eip: 0x93f8f182 cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
    Thread 3:
    # 1 0x93f699ee in _dispatch_hwconfig + 0x93DACA66 (libSystem.B.dylib + 0x000009ee)
    # 2 0x9400a12c in _dispatch_hwconfig + 0x93E4D1A4 (libSystem.B.dylib + 0x000a112c)
    # 3 0x021bbd7d in _MerpCreateSession + 0x00000B07 (merp + 0x00002d7d)
    # 4 0x021bb3e5 in _MerpCreateSession + 0x0000016F (merp + 0x000023e5)
    # 5 0x021bb46c in _MerpCreateSession + 0x000001F6 (merp + 0x0000246c)
    # 6 0x021bbf25 in _MerpCreateSession + 0x00000CAF (merp + 0x00002f25)
    # 7 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
    # 8 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
    X86 Thread State:
    eax: 0xffffffa6 ebx: 0x93ff18a0 ecx: 0xb0184a6c edx:0x93f699ee
    edi: 0x00001b59 esi: 0x58a9e28c ebp: 0xb0184ad8 esp:0xb0184a6c
    ss: 0x00000023 eip: 0x93f699ee cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000206
    Thread 4:
    # 1 0x93f8f182 in _dispatch_hwconfig + 0x93DD21FA (libSystem.B.dylib + 0x00026182)
    # 2 0x93f8f336 in _dispatch_hwconfig + 0x93DD23AE (libSystem.B.dylib + 0x00026336)
    X86 Thread State:
    eax: 0x00100170 ebx: 0x93f8f379 ecx: 0xb0291f6c edx:0x93f8f182
    edi: 0x028204c0 esi: 0xb0292000 ebp: 0xb0291fc8 esp:0xb0291f6c
    ss: 0x00000023 eip: 0x93f8f182 cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
    Thread 5:
    # 1 0x9403155a in _dispatch_hwconfig + 0x93E745D2 (libSystem.B.dylib + 0x000c855a)
    # 2 0x010e3b76 in _FWaitForConnection + 0x0000002A (MicrosoftComponentPlugin + 0x00174b76)
    # 3 0x00fefb50 in _McpFInitNetworkPIDChecking + 0x0000111C (MicrosoftComponentPlugin + 0x00080b50)
    # 4 0x91ccd7ae in __gTECMasterGlobals + 0x919A184A (CarbonCore + 0x000267ae)
    # 5 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
    # 6 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
    X86 Thread State:
    eax: 0x000c0194 ebx: 0x00fefaff ecx: 0xb020fd4c edx:0x9403155a
    edi: 0x04000000 esi: 0xb020ff34 ebp: 0xb020fd68 esp:0xb020fd4c
    ss: 0x00000023 eip: 0x9403155a cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
    Thread 6:
    # 1 0x93fa46ca in _dispatch_hwconfig + 0x93DE7742 (libSystem.B.dylib + 0x0003b6ca)
    # 2 0x010e3c01 in _FReceiveMessage + 0x00000077 (MicrosoftComponentPlugin + 0x00174c01)
    # 3 0x00fef7fe in _McpFInitNetworkPIDChecking + 0x00000DCA (MicrosoftComponentPlugin + 0x000807fe)
    # 4 0x91ccd7ae in __gTECMasterGlobals + 0x919A184A (CarbonCore + 0x000267ae)
    # 5 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
    # 6 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
    X86 Thread State:
    eax: 0x00000193 ebx: 0x00fef76f ecx: 0xb0313cbc edx:0x93fa46ca
    edi: 0xb0313ed4 esi: 0xb0313f44 ebp: 0xb0313ce8 esp:0xb0313cbc
    ss: 0x00000023 eip: 0x93fa46ca cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000286
    Thread 7:
    # 1 0x93f6992e in _dispatch_hwconfig + 0x93DAC9A6 (libSystem.B.dylib + 0x0000092e)
    # 2 0x00feff13 in _McpFInitNetworkPIDChecking + 0x000014DF (MicrosoftComponentPlugin + 0x00080f13)
    # 3 0x91ccd7ae in __gTECMasterGlobals + 0x919A184A (CarbonCore + 0x000267ae)
    # 4 0x93f96fbd in _dispatch_hwconfig + 0x93DDA035 (libSystem.B.dylib + 0x0002dfbd)
    # 5 0x93f96e42 in _dispatch_hwconfig + 0x93DD9EBA (libSystem.B.dylib + 0x0002de42)
    X86 Thread State:
    eax: 0xffffffda ebx: 0x91cfff32 ecx: 0xb0395e6c edx:0x93f6992e
    edi: 0xb0395f46 esi: 0x00000000 ebp: 0xb0395e98 esp:0xb0395e6c
    ss: 0x00000023 eip: 0x93f6992e cs: 0x0000000b ds:0x00000023
    es: 0x00000023 fs: 0x00000023 gs: 0x0000000f eflags:0x00000246
    Loaded modules:
    0: Microsoft Entourage (12.2.3.091001 Reg=en Loc=0x0409): /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/Microsoft Entourage
    1: Netlib: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib
    2: MicrosoftComponentPlugin: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/MicrosoftComponentPlugin.framework/V ersions/12/MicrosoftComponentPlugin
    3: PowerPlant: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/PowerPlant.framework/Versions/12/Pow erPlant
    4: EntourageCore: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/EntourageCore.framework/Versions/12/ EntourageCore
    5: EntourageLegacy: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/EntourageLegacy.framework/Versions/1 2/EntourageLegacy
    6: merp: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/merp.framework/Versions/12/merp
    7: PowerPlantCore: /Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/../Frameworks/PowerPlantCore.framework/Versions/12 /PowerPlantCore
    8: OpenTransport: /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport
    9: Smart Crash Reports (1.5 Reg=English Loc=0x0000): /Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle/Contents/MacOS/Smart Crash Reports
    10: libTraditionalChineseConverter.dylib: /System/Library/CoreServices/Encodings/libTraditionalChineseConverter.dylib
    11: libSimplifiedChineseConverter.dylib: /System/Library/CoreServices/Encodings/libSimplifiedChineseConverter.dylib
    12: ATSHI.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/ATSHI.dylib
    13: libFontRegistryUI.dylib: /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Resources/libFontRegistryUI.dylib
    14: vImage: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
    15: ImageCapture: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    16: liblangid.dylib: /usr/lib/liblangid.dylib
    17: DirectoryService: /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    18: OpenCL: /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
    19: CarbonSound: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    20: HIServices: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    21: Accelerate: /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    22: HTMLRendering: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    23: CommonPanels: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    24: SpeechRecognition: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    25: libobjc.A.dylib: /usr/lib/libobjc.A.dylib
    26: SearchKit: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    27: CoreVideo: /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
    28: libvDSP.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    29: ColorSync: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    30: libGFXShared.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
    31: vecLib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
    32: libresolv.9.dylib: /usr/lib/libresolv.9.dylib
    33: libGIF.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
    34: CFNetwork: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    35: SpeechSynthesis: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    36: CoreFoundation: /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    37: libPng.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
    38: DiskArbitration: /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    39: TrustEvaluationAgent: /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
    40: libGLU.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
    41: libcrypto.0.9.8.dylib: /usr/lib/libcrypto.0.9.8.dylib
    42: PrintCore: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    43: FamilyControls: /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
    44: AppKit: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    45: CoreData: /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
    46: LangAnalysis: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    47: CarbonCore: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    48: libBLAS.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    49: ApplicationServices: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    50: QuartzCore: /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    51: libxml2.2.dylib: /usr/lib/libxml2.2.dylib
    52: AGL: /System/Library/Frameworks/AGL.framework/Versions/A/AGL
    53: OpenGL: /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    54: libcups.2.dylib: /usr/lib/libcups.2.dylib
    55: libTIFF.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
    56: libJPEG.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
    57: WebCore: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    58: Help: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    59: libGL.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
    60: OSServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    61: Security: /System/Library/Frameworks/Security.framework/Versions/A/Security
    62: IOKit: /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    63: libTrueTypeScaler.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib
    64: libCGXType.A.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXType.A.dylib
    65: SecurityInterface: /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    66: WebKit: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    67: ImageIO: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
    68: NetFS: /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
    69: DesktopServicesPriv: /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    70: libSystem.B.dylib: /usr/lib/libSystem.B.dylib
    71: OpenScripting: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    72: AudioToolbox: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    73: Ink: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    74: Carbon: /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    75: RawCamera (505 Reg=English Loc=0x0000): /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
    76: libFontRegistry.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
    77: libRIP.A.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    78: JavaScriptCore: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
    79: libFontParser.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
    80: libCoreVMClient.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
    81: libauto.dylib: /usr/lib/libauto.dylib
    82: DictionaryServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
    83: libmathCommon.A.dylib: /usr/lib/system/libmathCommon.A.dylib
    84: libbsm.0.dylib: /usr/lib/libbsm.0.dylib
    85: HIToolbox: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    86: CoreServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    87: MultitouchSupport: /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
    88: libGLImage.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
    89: libLAPACK.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    90: OpenDirectory: /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
    91: SystemConfiguration: /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    92: ColorSyncDeprecated.dylib: /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ColorSync.f ramework/Versions/A/Resources/ColorSyncDeprecated.dylib
    93: Kerberos: /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
    94: ATS: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    95: Metadata: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    96: AudioUnit: /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    97: libicucore.A.dylib: /usr/lib/libicucore.A.dylib
    98: libCSync.A.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    99: LaunchServices: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
    100: libRadiance.dylib: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
    101: QD: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    102: Foundation: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    103: CFOpenDirectory: /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
    104: libGLProgrammability.dylib: /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
    105: vecLib: /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    106: libkxld.dylib: /usr/lib/system/libkxld.dylib
    107: SecurityHI: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    108: QuickTime: /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    109: CoreUI: /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    110: IOSurface: /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
    111: libsasl2.2.dylib: /usr/lib/libsasl2.2.dylib
    112: PasswordServer: /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
    113: CoreGraphics: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    114: Print: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    115: libvMisc.dylib: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    116: CoreText: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
    117: CoreAudio: /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    118: libstdc++.6.dylib: /usr/lib/libstdc++.6.dylib
    119: AE: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
    120: Cocoa: /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    121: libsqlite3.dylib: /usr/lib/libsqlite3.dylib
    122: NavigationServices: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    123: libz.1.dylib: /usr/lib/libz.1.dylib
    124: libxslt.1.dylib: /usr/lib/libxslt.1.dylib
    125: SecurityFoundation: /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    126: libCyrillicConverter.dylib: /System/Library/CoreServices/Encodings/libCyrillicConverter.dylib
    127: libGreekConverter.dylib: /System/Library/CoreServices/Encodings/libGreekConverter.dylib
    128: libJapaneseConverter.dylib: /System/Library/CoreServices/Encodings/libJapaneseConverter.dylib
    129: libKoreanConverter.dylib: /System/Library/CoreServices/Encodings/libKoreanConverter.dylib
    130: libLatin2Converter.dylib: /System/Library/CoreServices/Encodings/libLatin2Converter.dylib
    131: libLatin5Converter.dylib: /System/Library/CoreServices/Encodings/libLatin5Converter.dylib
    132: libLatinSuppConverter.dylib: /System/Library/CoreServices/Encodings/libLatinSuppConverter.dylib
    Operating System Information
    Operating System: Mac OS X 10.6.2 (Build 10C540)
    CPU: Intel Core Duo, Number: 2, Speed: 2147 MHz
    gestaltPhysicalRAMSize err = 0, result = 2047 MB
    gestaltSystemVersion err = 0, result = 0x1062
    Screen: 1920 x 1200, depth = 32, ltbr = 0, 0, 1200, 1920
    Microsoft Application Information:
    Error Reporting UUID: A50CE3D6-2E3B-41D7-8BDF-E28D8D6AED8D
    Time from launch: 0 hours, 0 minutes, 10 seconds
    Total errors on this client: 3
    There's no crash log for GE; it just sits on the dock. The only option is a Force Quit.
    Any other suggestions?

  • How can I download google earth onto my iPad 2 if I'm based in Kenya?

    When I search fir it on the App Store Google Earth isn't the, but when I goggle it therebis an iPad app available. I'm based in Kenya and I'd like to know how I can I download it.

    Open the App Store in iTunes.
    Download Google Earth from the App Store.
    Then use iTunes to load on iPad.
    Allan

Maybe you are looking for

  • Want to use iPod on both Windows and Mac What is going on?

    I had a iPod mini and we have a 1st gen Nano and 2 2nd gen Nano's and all worked fine when I formatted them on the Windows PC and then plugged into the Mac. My mini died so I now have a 4th gen Nano. Works fine on the Windows PC. When I plug it into

  • Problem with the creation of asset master record

    Hi Gurus, i am having problem in creation of a new asset master with the use of existing man asset number and different asset sub number. I am trying to create the asset in the same company code but different depriciation area, but the system is not

  • QT 10,0 In Snow...where have copy and paste gone?

    QT Pro was AWESOME and assumed that the new QT 10.0 was better and now cannot event copy a clip from one QT file to paste to another. What is even more annoying is QT 10.0 help When you put the word "copy" in the QT 10.0 help window you get NOTHING..

  • Help About Usb Cable

    Dear Sir I Am Using Nokia 2690 When I Am Using Usb Cable To Connect My Phone Pc Is Saying Thar Usb Cable Not Recognised How To Sovle This Problem I Have Nokia Pc Suite I Tried To Connect With That

  • Bapi to delete BP role ( eg : customer , prospect )

    Hi , Could you please provide me with FM or bapi to delete role of BP ( like customer role, prospect role ..etc ) . Your help is appreciated. Thank you