Google mail and foxfire don't wirk well together what can I do

Google mail is NOT SENDING or is very slow attaching small files and then it won't send, it says it is sending but is not sending.

You will have to restore the phone as NEW. You will lose all the data on your phone.

Similar Messages

ICal, Mail, and Exchange don't play well together

I running Lion. Syncing happens for the most part, but there are bugs. When I create events, the name of the event reverts back to New Event after it syncs with the Exchange server. This isn't my biggest issue. The problem I desperately want to solve is that my calendar invitations do not show in Mail. The only way I can accept/decline invitations is in the iCal Invitations tray. This means that I cannot see comments people make in invitations, or even more importantly, when then decline my invitations. I know it works as it should for another user on our network, but not for me. We're both running the same apps and the same operating system.
Any thoughts on how to make the Apple apps play well, or what is the best way to wipe everything and start over? Fresh install, etc. Any suggestions are appreciated. Thanks.

I appreciate the response, but it's not the same issue. True, the "erasing the event name and reverting back to New Event" is the same, but as I said, that's not my biggest issue. I have not seen any other threads anywhere that reflect the issue of event invitations not showing in Mail (although I'm sure someone else has experienced it).
Sine there's someone else at my company with the same setup, and it's working, I was hoping that someone could suggest the best process for wiping everything out and re-installing. I used to do this back before the OSX days, but since OSX I've had so few problems that I've hardly ever needed to do any kind of support.

I have bought a iphone 5 second hand and i restore it and now i need the icloud original user and i don't know it!what can i do?i can not activate my iphone

I have bought a iphone 5 second hand and i restore it and now i need the icloud original user and i don't know it!what can i do?i can not activate my iphone

If you're able to contact the previous owner, send them this link and tell them to follow the instructions.
If not, you can't activate the device but may be able to get it refunded.
Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(112266)

Why I don't receive emails from apple? I want to change my password and I don't receive any email :| What can I do?

Why i don't receive emails from apple ? I want to change my password and i don't receive any email :| What can I do?

The email is sent to your recovery email. That email is not the same as your Apple ID. If you haven't assigned one with your Apple ID do so here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Can it be that OS 10 and Flash don't work well together? Internet browsers are freezing up

I started this discussion on the macbook pro forum but no one has figured this out and I'm beginning to think this could be an OS 10 problem, so I'm posting here. No matter what browser I use (Safari or Firefox), after a little bit of surfing, the browser freezes and I get the spinning circle of death. Only thing that works to fix it is to reboot. But then the cycle repeats. I've found discussions of other fixes for this but nothing has worked. So far I have:
Added open source DNSs
Updated all software
Scanned for malware with Sophos (none found)
Cleared browser caches
Run disk utility and repaired all permissions
Reset Flash settings to disable hardware acceleration
Moved large files to an external hard drive to free up more disk space
Checked to see if I have a bad Shockwave plug-in that was the culprit for others (didn't have it)
Called Mac support and was advised to use disk utility
None of this has worked. In other cases, people felt the problem had to do with flash. For them, changing the hardware acceleration setting (as I did) or removing the bad plug-in fixed the problem. This has not helped me, and I'm at a loss of what to try next. Of note, nearly every other instance I turned up about this involved SLeopard 10.6.6. That's what I was using. I updated to 10.6.8, but it didn't help. Any suggestions?
I'm on a Macbook pro with 10.6.8, 4GB of ram and a 320GB hard drive showing 120GB free.

First level Console messages are usually too general. Those are kind of generic and I'm not seeing anything related there to your problem. You need to open Console and navigate inside to system.log.
This really needs fine some tooth troubleshooting. It could be so many things causing the problem. I'd call Apple back and get on the phone with a senior tech who can take the time to walk you through everything that needs to be looked at. Sounds like the tech you got either wasn't too skilled or ready to do that.
One of the first things to try is to create a new admin user and test for this there. The Apple tech should have suggested this. If it doesn't happen there, you know it's specific to your regular account and not system wide.
You could take a shotgun approach and throw Applejack at it. Make sure you do the underlined steps as well.
Download:
http://sourceforge.net/projects/applejack/
Article on using:
http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
It runs in single user mode, where it runs more safely than other maintenance/cleaning programs because there is less chance of interference from the OS. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
You can also run tasks selectively and for specific users by typing in "applejack." After running in "AUTO," you can go back and run it again as "applejack," steps 3 & 4 only, for your user.
The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
NOT YET UPDATED FOR LION (although it is reported by some that it is working)
(Adapted from post by BDAqua)

I know my e-mail and password but forgot my security questions, What can i do?

i know my e-mail and password but forgot my security questions, and im not able to access my app store account, what can i do

Click here for information. If you can't get the answers emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(81755)

KVM switch and Mavericks don't play well together

I upgraded to Mavericks yesterday, and started having this very annoying problem with my KVM switch, which used to work fine with Mountain Lion. I've been using this KVM switch for my mac mini and PC, in order to share my keyboard and mouse, very stably for several months.
Basically, when switching back and forth, there is a chance that ALL the peripheral devices would stop working in Mavericks. This includes my apple bluetooth keyboard and the magic touchpad, which are not related with USB (or maybe the bluetooth chip is still hooked up via USB inside).
For some reason, screen sharing stops working too, althought the IP I was trying to connect to was the ethernet port.
If I try to do a shutdown -r now via SSH, the system tries to shut itself down, but would get stuck with a spinning animation on the screen.
There is nothing in the system log, no error message.
My KVM switch is an IOGear GCS42UW6. Connected USB devices are: Apple USB keyboard and Logitech G500 mouse.

10.8 worked well with my Mac Mini (2009) connected to IOGEAR KVM model GCS1108. My mouse is from Redmond and the keyboard is a Goldtouch.
Mavericks has a problem with my KVM switch as well. It seems to be a USB problem.
Case 1: The Mini's video is connected to the KVM switch -- mini DVI port to DVI. If the KVM USB cable (known good) is connected, the Mini chimes at boot but no grey Apple logo appears. LCD remains blank white. Boot does not progress.
Case 2: The Mini's video is connected to the KVM switch, as before. If the KVM USB cable is NOT connected, the Mini chimes at boot, the grey logo appears, and boot proceeds normally. Video is fine. I then connect the KVM USB cable to the Mini and use keyboard and mouse. KVM switching works as expected.
If the KVM USB cable is NOT connected but a keyboard and mouse are connected directly to the Mini, the boot sequence is normal. Video works.
The problem is not the hardware, all of which worked well with 10.8 (Mountain Lion). I would downgrade if Apple made 10.8 available from the App Store.

Actiontec dsl Gateway and WRT160N don't play well together

I have an actiontec dsl gateway router as my entry point to the network that also provides one wireless zone downstairs. Upstairs where the signal is weak I had long used an apple airport connected via ethernet cable. Then the apple died and I chose to replace it with a WRT160n. Although everything checked out fine during configuration, it would drop connections and although it appeared was impossible sometimes to connect to with lots of timeouts etc.
Now the entire network has slowed down considerably. After I took off the new router things sped up again. Any ideas on how to set this up better or troubleshoot what's happening?

Adjust the Wireless Settings on your Router -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...Under Setup change the MTU to 1350 and save the changes...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

F2FS and rEFInd don't play well together?

For a few days now I've been trying to install the F2FS file system onto an HP Envy 6 laptop with a tiny (30GB) Intel SSD. The SSD itself is enterprise-grade and is fully functional to my knowledge at the time of this writing. I will be testing that last statement later today so I may have to retract my last sentence if I prove that assumption to be false.
The problem is simple: I can install Arch using an up-to-date ISO and that's fine. In line with the wiki (see here: F2FS wiki page) I made the boot directory a 512MB Fat 32 EFI partition (EF00 type). I formatted all of my other partitions as F2FS volumes. This part works splendidly as far as I can see. However, when I reboot to finish the install I get a rEFInd splash screen but the normal icons (which are suppose to allow you to choose which install you want to boot into) are not visible. I only see the words and icons below the primary one (the ones for information, reboot and shutdown options). I have tried to install this with an older Arch ISO and I get (unsurprisingly) the same result (this is a net install after all).
I use Syslinux on my desktop machine and I'm very happy with it. I considered installing it instead of but its implementation is, at the present time, full of bugs and ugliness. I have used Gummiboot once in the past but it was only after several hours of trial and error that I got it to work. I have found rEFInd's installer to be simpler to use and has a more attractive presentation on the whole. For these reasons I would prefer to use rEFInd but if I have to I'll use something else if this issue is un-resolvable at this point in its development.
I have tried F2FS in the past but I opted to discontinue using it in the past because it lacked (at that time) an fsck mechanism to recover from crashes and other unexpected fun. As of a couple of weeks ago there was a commit that showed that F2FS does now have a viable fsck mechanism built-in.
I also would like to hear from anyone else's (un)succesful trials with F2FS. I'd be grateful to if I could reading any other person's first-hand experiences and opinion would of F2FS.
Edit: I forgot to add that I did look at the SSD wiki page entry but it only mentions F2FS as a possible file system to use and provides a link the Wikipedia's list of possible file systems to use for SSDs. See here: F2FS on SDDs
Thank you,
MoonSwan
Last edited by MoonSwan (2014-12-06 21:30:35)

Considering that rEFInd is not a bootloader at all and knows nothing about the filesystem of your rootfs, I am going to guess this has more to do with your rEFInd config than your choice of filesystem.
Maybe it would help if you posted your rEFInd config and a 'tree /boot' (you'll need the tree package from [community]).

TS1389 I've tried all four suggestions and the problem still persists. On one song only, iTunes still asks me to authorize my computer, and I don't know why. What can I do to make it stop and let me listen to my song?

The song is "Invictus" by Lamb Of God. Nothing has worked so far and it's a little frustating. :/

I'm having this same issue as well even though my PC is already authorized and after trying the 4 suggested fixes with an Audiotrack that I purchased today...Beth Moore - Esther Series - Session 2 - Part 4.
It's also not allowing me to put the track on my iPod even though other files on the same album go on just fine. It's giving me an error stating that it's an "invalid file format".
Help us out please! ^_^

My mac book pro suddendly became really slow, and I don't know why. What can I do?

A few days ago, my MPB started to be really slow. Everything takes time, I cannot use several applications at the same time anymore, or nothing works.
I tried cleaning the disk and I deleted all useless applications. I have 422Go/499Go of free storage memory, and nothing seems wrong in the activity monitor.
What else can I do?

How did you try 'cleaning' your disk? Did you use Disk Utility>First Aid and Verify and Repair the HDD?
Look at these exhaustive articles that may assist you:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Im trying to use my sisters old iphone but its asking me for her icloud email andnpassword. and she forgot it and the wake/sleep button is broken what can I do I don't have a lap top?

I need help rebooting my sisters old phone. Its asking for icloud email and password but she forgot it and I don't have a computer what can I do??

If she can't remember the ID/password, she will need to go to https://iforgot.apple.com to recover it/reset the password or she will have to call Apple and speak to someone in account security.

I have had my I have had my iPhone 5c for a little over a month and people can never hear me during calls, like I'm in a tunnel or muffled! I googled this issue and several others have had this problem as well. What can I do to get help?

I have had my I have had my iPhone 5c for a little over a month and people can never hear me during calls, like I'm in a tunnel or muffled! I googled this issue and several others have had this problem as well. What can I do to get help?

Take it in to an Apple store or authorized service center for evaluation and possible replacement.

HELP - My mail and safari don't work

Hello,
I need help. My Mail and Safari where very instable. Sudenly they stopped working. I click in the icons on the bar and they don't open.
yesterday night I did an "Archive and Install" instalation. This instalations just installs the operational system again and leave the rest intact.
It worked perfectly. I went to sleep at 3 AM with everything working.
I woke up and again the mail and safari don't launch.
I did the "Archive and Install" instalation again and the mail worked once and Safari didn't.
I just don't know what to do.
The system I have is OS X 10.3.5
yesterday after installing the system I did the update to 10.3.9
everything worked.
Today when I woke up and they wheren't working again I did the instalations again and didn't upgrade. Didn't work.
Does someone knows about this happening before?
HELP
thank you for any help you can give me
january river

january river,
Welcome to Apple Discussions.
Follow the troubleshooting checklist listed in Multiple applications quit unexpectedly or fail to launch, by Dr. Smoke and let us know what happens.
;~)

I just opened my mail, and I don't find absolutely nothing, no message. The application is empty! how I can retrieve the information?!! do not know what happened

I just opened my mail, and I don't find absolutely nothing, no message. The application is empty! how I can retrieve the information?!! do not know what happened

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460)

Google mail and foxfire don't wirk well together what can I do

Similar Messages

Maybe you are looking for