Got a ipod touch, downloaded itunes and it said to update the software to 5.0.1, now when restoring the ipod - itunes doesnt recongize the device and giving me error 1611... any suggestion
help
Here's what the article iTunes: Specific update-and-restore error messages and advanced troubleshooting says about your error:
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Similar Messages
-
I recently updated my softward on my computer. Now when I plug my devices into my computer on iTunes, they are not recognized and I cannot sync them.
Had the same problem. I initially reinstalled iTunes without removing the older files. Finally, I removed itunes, apple application support, apple mobile device support and apple software update. Downloaded a fresh iTunes instal file from the iTunes site. Everything is fine now.
-
I constantly have problems with my ipod touch 4g. I previously owned an ipod touch 2g but I would always end up having to restore it because of something silly. This time, my 4g 8 gig ipod touch needs to be restored. I synced it to my desktop and I deleted some apps to free up space. After the sync, both itunes and my ipod show 0 bytes free and the "other" section takes up over 1 gig of space. Everyone says to restore it but I don't want to end up losing my data and music again. Is there anything I can do to keep my data and fix this little glitch?
All the music should be on the computer so you can just sync the music back to the iPod after you restore the iPod to factory defaults/new iPod. Regarding app data, just export (email/file sharing etc) as much as possible so you can import it back.
-
I am a beginner using Apple software, so please bare with me.
I am having trouble moving music from the iPad to iCloud in order to save space in the device.
I realise that in order to store music not purchased on iTunes store can only be stored in iCloud if you subscribe to iTunes Match which I have done.
Appears that moving music from iTunes on my PC to iCloud is successful by deleting song or album in iTunes library and than click on "Keep song" instead of sending to recycle bin. After this has been done the Cloud Icon appears on the album or against the song. However when I then look at Music on the iPad the album or song have not been moved to iCloud. I have tried syncronising with cable connected between PC and iPad. After that has been done the message is that sync was successful bujt still music has not been moved into the Cloud.
Can anybody help? What am I doing wrong? Is there a way to move the music to the cloud working on the iPad only (without trying to use the PC to move the music to the cloud)?You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device. If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match.
Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases. Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy. -
I treiws upgrading my itunes to the b=newest version and I got the following error:
"could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run. Verrify that you have sufficent access to that key or contact you support personnel"
I then went to that key and changed the permissions on it so that for Everyone - it was Full Controll instead of limited and I also changed the permissions for my administrative account which also didn't have full control. I tried to go back to the Itunes installer but it still wouldn't let me continue the process.
Any help would be much appreciated.
Musicalrabbi2k3Reinstall the system.
-
I have an iphone 3 and I have just updated my software to IOS5, my phone now says no service and no sim and everything appears to have disappeared. what can I do
was ur phone previously jailbroken and Unlocked using this method?
-
ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either. Any suggestions?
Does it light up at all? If not, you could have a battery issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Hi. My itunes library is in current 10.5.2 but my old ipod touch 4th or 3rd gen is not updating at all its still in current 4.2 and there is some apps i cant download that requires a 4.3 update but in my itunes it wont. Please help!
Are you sure you have a 4g/3g iPod? If you don't have a camera, it's definitely not 4G. If it has no camera and is 8 or 16 Gb it is a 2G and can't go beyond 4.2.1.
-
I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?
Try this:
http://support.apple.com/kb/HT2519 -
The Home button on my iPod Touch is very unresponsive. It takes several tries to activate it. While doing so, it responds to one click versus the intended two clicks and vice versa. It is a very frustrating process. Any suggestions? I already tried the "shut off" process that was suggested on the Apple site, but that did not help.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I have an iPod Touch 4th Generation and have not updated the software since I purchased it. When I first purchased the iPod Touch, I synced it with an old computer and an older version of iTunes. I no longer have access to the old computer and no access to the older music I downloaded onto the old computer. If I update the software for my iPod, will I lose all of my music that is currently on the iPod?
iOS 6.1.3 Software Update
iOS: How to update your iPhone, iPad, or iPod touch
Since your updating from iOS 4 to iOS 6, you will most likely lose your songs, but if songs were purchased from iTunes, you can try this:
Downloading past purchases from App Store, iBookstore, and iTunes Store
You can redownload from iTunes on your iTouch, if running iOS 5 or better. -
Why does my iPod touch take a lot of time to update and download apps? I got the one of the fastest wifi
Try this:
Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app. -
ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???
Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I have got an old ipod touch IOS 4.2.1. and i need to update to 5 or 6 ??
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
Starting when iOS 7 was releases, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists. -
I downloaded an app in the itunes app store on my pc and it's in my library, but it will not show up when i click ipod then apps?
You need to sync the app to the iPod
iTunes: Syncing media content to iOS devices and iPod
Is the app compatible with your model iPod and iOS?
Are any Restrictions set that would prevent installing the app on your iPod? Settings>General>Restrictions
Do any apps no sync to the iPod?
Does any media now sync to the iPod?
Have you successfully synced aps to this iPod from this iTunes library before?
Maybe you are looking for
-
Can't boot my T500 anymore... just getting to a black screen after the XP logo
I have a big problem with my Lenovo T500. Never had any problems before. Then yesterday, I could not open OpenOffice anymore, neither convert to pdf from an already open OpenOffice document. I got error messages saying the programmes can't be openend
-
hi all, I want to set the screen resolution in java 1.3. I got the screen resoluion by using Toolkit.getDefaultToolkit().getScreenSize(). Now i want to set the new resolution. Please tell me how to set it. it should be compatible to java 1.3. Please
-
Accessing oracle with web dynpro
Hey people! I want to access a simple sql query on an oracle database and write the output in web dynpro.. Do i have to make an ejb for that? an how do i do that? or is it an easier way?
-
How to put a long tab canvas on 2 or more lignes
I have 15 basic tables ( 2 or 3 fields). I would like to manage tese tables from one page. When I generated the page I got a long tab canvas that I should scroll at rigth to see the rest of the tabs; My question is : can I put these tabs under 2 or m
-
Hi Experts, can any one of u provide a detailed information about AS2 adapter and any scenario using AS2 adapter ? Thanks, Ravi.N