Got error "Object V_T001P is delivered by system HRDCLNT100"

Our ERP team tried to add config for subpersonnel areas in ERP DEV for a new mini-HR component they use with CATS. However, thety got an error saying "Object V_T001P is delivered by system HRDCLNT100 and should not be maintained here."
I am not familiar with ALE.
Where should I start looking?
Thanks.
Joan

Similar Messages

Error "Object is currently in use elsewhere."

Hi!
I am trying to use "Task", but I got Error "Object is currently in use elsewhere."
Bitmap oriBitmap = new Bitmap(pictureBox1.Image);
Task[] tasks = new Task[4];
for (int k = 1; k <= tasks.Length; k++)
int count = k;
tasks[k] = Task.Factory.StartNew(() =>
int minJ = count < 2 ? 0 : oriBitmap.Height / 2;
int maxJ = count < 2 ? oriBitmap.Height / 2 : oriBitmap.Height;
int minI = count % 2 == 0 ? 0 : oriBitmap.Width / 2;
int maxI = count % 2 == 0 ? oriBitmap.Width / 2 : oriBitmap.Width;
for (int j = minJ; j < maxJ; j += 8)
for (int i = minI; i < maxI; i += 8)
if (((i + 68) < oriBitmap.Width) && ((j + 68) < oriBitmap.Height))
Bitmap bmp = new Bitmap(68, 68);
//Get Clone 68 x 68
using (var g = Graphics.FromImage(bmp))
g.DrawImage(oriBitmap, new Rectangle(0, 0, 68, 68), new Rectangle(i, j, 68, 68), GraphicsUnit.Pixel);
//Process Clone
I've tried to fix it but sometimes I got Error in line
if (((i + 68) < oriBitmap.Width) && ((j + 68) < oriBitmap.Height))
and
g.DrawImage(oriBitmap, new Rectangle(0, 0, 68, 68), new Rectangle(i, j, 68, 68), GraphicsUnit.Pixel);
Is there any idea to fix it?
Thanks,.

Hi,
if you just read the Bitmap from multiple threads, it *may* help to put the Width and Height into separate Variables before the threads are spawned. Something like int w = oriBitmap.Width, same for height, then start the tasks and access the w and h variables
from the threads. This is a common technique when using a Parallel.For etc.
But since you draw the Bitmap in the threads, Vidya Vrat Agarwal's reply will be the correct one.
What you could do, is to copy the parts of the bitmap, that are processed in each task before creating the tasks. So, if you create 4 tasks, get 4 threadlocal Bitmap-copies that contain the part of the orig Bitmap to be processed.
Regards,
Thorsten

BMP question : got javax.ejb.EJBException error Object state not saved

Could anybody please help me? I could not figure out what i did wrong.
I got the javax.ejb.EJBException error: Object state not saved
when i test the getname() method for findByPrimaryKey() and findAll() methods.
Here is my code:
package org.school.idxc;
import javax.sql.*;
import javax.naming.*;
import javax.ejb.*;
import javax.sql.*;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.ArrayList;
import java.util.Collection;
import java.util.Enumeration;
import java.util.Vector;
* Bean implementation class for Enterprise Bean: status
public class statusBean implements javax.ejb.EntityBean {
     private javax.ejb.EntityContext myEntityCtx;
     private int id;
     private String name;
     private DataSource ds;
     private String dbname = "jdbc/idxc";
     private Connection con;
     * ejbActivate
public void ejbActivate() {
     * ejbLoad
     public void ejbLoad() {
     System.out.println("Entering EJBLoad");
     try
     Integer primaryKey = (Integer) myEntityCtx.getPrimaryKey();
     String sqlstmt = "select id, name from from status where id =?";
     con = ds.getConnection();
     PreparedStatement stmt = con.prepareStatement(sqlstmt);
     stmt.setInt (1,primaryKey.intValue());
     ResultSet rs = stmt.executeQuery();
     if (rs.next())
          this.id = rs.getInt(1);
          this.name = rs.getString (2).trim();
          stmt.close();
     } // if
     else
          stmt.close();
          throw new NoSuchEntityException ("Invalid id " + id);
     }// else
          } // try
     catch (SQLException e)
     System.out.println("EJBLOad : " + e.getMessage());
          } // catch
     finally
     try
          if (con != null)
          con.close();
          }// try
     catch (SQLException e)
          System.out.println("EJBLOad finally" + e.getMessage());
          } // catch
          }// finally
     * ejbPassivate
     public void ejbPassivate() {
     * ejbRemove
     public void ejbRemove() throws javax.ejb.RemoveException {
     System.out.println ("Entering ejb Removed");
     try
     String sqlstmt = "delete from status where id=" + id;
     con = ds.getConnection();
     Statement stmt = con.createStatement();
     stmt.executeUpdate(sqlstmt);
     stmt.close();
     }// try
     catch (SQLException e)
     System.out.println("Ejb Remove" + e.getMessage());
     } // catch
     finally
     try
          if (con!=null)
               con.close();
     }// try
     catch (SQLException e)
          System.out.println ("EJBRemoved " + e.getMessage());
     } // catch
     } // finally
     * ejbStore
     public void ejbStore() {
     System.out.println("Entering the ejbStore");
     try
String sqlstmt = "update status set id=" + id + ",name='" + name + "' where id=" + id;
     con = ds.getConnection();
     Statement stmt = con.createStatement();
     if (stmt.executeUpdate(sqlstmt) != 1)
          throw new EJBException ("Object state not saved");
stmt.close();
     } // try
     catch (SQLException e)
          System.out.println ("EJBStore : " + e.getMessage());
     }// catch
     finally
     try
          if (con != null)
          con.close();
     } // try
     catch(SQLException e)
          System.out.println ("EJBStore finally " + e.getMessage());
     } // catch
     } // finally
     * getEntityContext
     public javax.ejb.EntityContext getEntityContext() {
          return myEntityCtx;
     * setEntityContext
     public void setEntityContext(javax.ejb.EntityContext ctx) {
          myEntityCtx = ctx;
          try
          InitialContext initial = new InitialContext();
          ds = (DataSource)initial.lookup(dbname);
} // try
          catch (NamingException e)
          throw new EJBException ("set Entity context : Invalid database");
          }// catch
     * unsetEntityContext
     public void unsetEntityContext() {
          myEntityCtx = null;
     * ejbCreate
     public Integer ejbCreate(Integer key, String name) throws javax.ejb.CreateException {
this.id = key.intValue();
this.name = name;
          System.out.println ("Entering ejbCreated!!!");
          try
          String sqlstmt = "insert into status(id,name) values (" + id + ",'" + (name == null ? "" : name) + "')";
          con = ds.getConnection();
          Statement stmt = con.createStatement();
          stmt.executeUpdate(sqlstmt);
          stmt.close();
          }// try
          catch (SQLException e)
          System.out.println("EJBCreate : SQLEXception ");
          }// catch
          finally
          try
          if (con!=null)
               con.close();
          }// try
          catch (SQLException e)
          System.out.println ("EJB Created Finally : SQLException");
          e.getMessage();
          } // catch
          }// finally
          this.id = key.intValue();
          this.name = name;
          return key ;
     * ejbPostCreate
     public void ejbPostCreate(Integer id, String name) throws javax.ejb.CreateException {
     * ejbFindByPrimaryKey
     public Integer ejbFindByPrimaryKey(
          Integer key) throws javax.ejb.FinderException {
          try
          String sqlstmt = "select id from status where id=" + key.intValue();
          con = ds.getConnection();
          Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(sqlstmt);
          if (!rs.next())
          throw new ObjectNotFoundException();
          } // if
          rs.close();
          stmt.close();
          } // try
          catch (SQLException e)
          System.out.println ("EJBFindBYPrimaryKey " + e.getMessage());
          } // catch
          finally
          try
          if (con!=null)
               con.close();
          }// try
          catch (SQLException e)
          System.out.println ("EJB Find by primary key" + e.getMessage());
          }// catch
          }// finally
          return key;
     * @return Returns the name.
     public String getName() {
          return this.name;
     * @return Returns id
     public int getId() {
          return this.id;
     * @param name The name to set.
     public void setName(String xname) {
          this.name = xname;
     * ejbFindByLastnameContaining
     public Enumeration ejbFindAllNamne () throws javax.ejb.FinderException
     try
     String sqlstmt = "select id from status order by id";
     con = ds.getConnection();
     Statement s = con.createStatement();
     ResultSet rs = s.executeQuery(sqlstmt);
     Vector keys = new Vector();
     while (rs.next())
          keys.add(new Integer(rs.getInt(1)));
     }// while
     rs.close();
     s.close();
     con.close();
     return keys.elements();
     } // try
     catch (SQLException e)
          throw new FinderException (e.toString());
     } // catch
}

Hi,
if you look at your error message you will see the problem. In your code you've missed to implement
public void ejbPassivate {}
so your code looks like this
import java.lang.Object;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.rmi.RemoteException;
import java.lang.Math;
import java.util.Random;
import java.io.*;
/** * Title: * Description: * Copyright: Copyright (c) 2001 * Company: * @author * @version 1.0 */
public class DiceEJB implements SessionBean, Serializable
     public int[] Roll()
          Random rng = new Random();
          int[] diceArray = new int[5];
          for(int i =0; i < diceArray.length;i++)
               diceArray[i] = (Math.abs (rng.nextInt()) % 6) +1;
          return diceArray;
     public DiceEJB(){}
     public void ejbCreate() {}
     public void ejbRemove() {}
     public void ejbActivate() {}
     public void ejbPassivate() {}
     public void setSessionContext (SessionContext sc)
     private void writeObject(ObjectOutputStream oos) throws IOException
          oos.defaultWriteObject();
     private void readObject(ObjectInputStream ois) throws ClassNotFoundException, IOException
          ois.defaultReadObject();
bye

The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

Thanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error.

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

Got error while importing objects

Hi,
I got error with return code 8 while importing objects.
Actually, i created Multiprovider and Two queries on that and transported those objects in the same request and released in SE09 and while importing these objects I got error with Return Code 8.
Pls Help me, what i should do now.
Thanks&Regards,
Rafi

Hi Mohd.
Return code 8 is an error which indicates that some objects are missing. You will have to include these missing objects before you can create the transport successfully. In your scenario it might be a structure, CKF, RKF, missing info providers etc.
Hope it helps.
BR
Stefan

We got error "System is unable to interpret the SSO ticket received"

We got error "System is unable to interpret the SSO ticket received" on Backend system(R/3 4.7).
We use SAP Enterprise Portal 6.0 SP15.
Please let us know what is problems ?
We done following steps in SAP EP.
1. Created LOGON-METHOD (Logon Method : SAPLOGONTICKET).
2. Export Public-key (verify.der) from SAP EP.
   (System Admin -> System config -> Keystore Administration -> Download)
We done following steps in SAP R/3.
3. Start STRUSTSSO2 Transaction.
   In the PSE status frame on the left, choose the system PSE.
   In the certificate section, choose Import Certificate.
     The Import Certificate screen appears.
   Choose the File tab.
   In the File path field, enter the path of the portal's verify.der file.
   Set the file format to DER coded and confirm.
   In the Trust Manager, choose Add to PSE.
   Choose Add to ACL, to add the Portal Server to the ACL list.
   In the dialog box that appears, enter follows:
     system ID    :J2E
     client       :000
     Subject name :CN=J2E
     Issuer name :CN=J2E
     Serial number:00
   Save your entry.
4. Set profile parameters
   login/accept_sso2_ticket = 1
   login/create_sso2_ticket = 0
5. Restart SAP R/3 system.

Hi,
I faced the same problem when i am configuring the SSO,
check the portal client number in System Administration>System Configaration->UM Configuration--->Direct Editing
and give the same client number
In the dialog box that appears,
system ID :J2E
client :000
else check weather u r importing the certificate correctly.
First export the verify.der and and import that using the STRUSTSSO2
Thanks
Ajay

Invoke Web service - WSDL error "Object of type 'System.Int32' cannot be converted to type 'System.UInt64'."

Hello,
I'm having a problem when I try to load the WSDL file for the "Invoke Web Service" activity.
I'm trying to create a connection between Orchestrator 2012 R2 and Cisco Unified CM through a Web Services. When I click the WSDL file and I click the "Format Hint" button appears the following error "Object of type 'System.Int32' can not be
converted to type 'System.UInt64'."
The WSDL file that Cisco Unified CM I exported another work tools, tested and working well. In Orchestrator just gives the error.
Can anyone help with this?
Thank you
Rui

Hi,
You're going to have to use Get-AzureVM to get your specific VM object and then pipe it into Add-AzureDataDisk. See the examples here:
http://msdn.microsoft.com/en-us/library/windowsazure/dn495298.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

I got error when I export database ORACLE 9i from solaris 9.

I want to export full database ORACLE 9i from SOLARIS 9 to import full database on ORACLE 9i on windows.
I set oracle environment and NSL_LANG with command:
bash-3.00$ export ORACLE_SID=TIS
bash-3.00$ export NLS_LANG=AMERICAN_AMERICA.TH8TISASCII
and then run command to export:
bash-3.00$ exp system/manager@TIS full=y file= /u03/dmp/TISfull.dmp log=/u03/dmp/exp_TIS.log
I got error message as:
Export: Release 9.2.0.1.0 - Production on Thu Oct 8 17:57:32 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in TH8TISASCII character set and UTF8 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at "SYS.DBMS_AW", line 105
ORA-06512: at "SYS.DBMS_AW", line 221
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
How can I solve this problem?
Any suggestion?

#### HOW to solve it.
## To check the default temporary tablespace of the database:
SQL> select property_name, property_value from database_properties;
## check DEFAULT_TEMP_TABLESPACE, if it use wrong temporary tablespace, run:
SQL> alter database default temporary tablespace temp;
## check user with temporary tablespace, run command:
SQL> select username, temporary_tablespace, account_status from dba_users;
## change temporary tablespace:
SQL> create temporary tablespace temp1 tempfile '/data/u01/app/oracle/oradata/TIS/temp_b.dbf' size 100m;
SQL> alter database default temporary tablespace temp1;
SQL> drop tablespace temp including contents and datafiles;
SQL> create temporary tablespace temp tempfile '/data/u01/app/oracle/oradata/TIS/temp01.dbf' size 100m autoextend off extent management local uniform size 1m;
SQL> alter database default temporary tablespace temp;
SQL> drop tablespace temp1 including contents and datafiles;
Thanks

Wheni am tried to settle order i got error There are no accrued amounts; s

Wheni am tried to settle order i got error There are no accrued amounts; settlement is not possible.

Hi Guru,
Details of production order
Target quantity =1,063,893      Delivered quantity =1,063,893     confirmed quantity = 1,074,945     EA     Basic start =07.04.2009     Basic finish   =01.11.2010     TECO PCNF DLV PRC GMPS MANC RESA SETC*
When i am trying to close order system gives Error messsage
000 Unprocessed future change recs for order SS50008TT/1A prevent del. fl
000 Order SS50008TT/1A is partially confirmed
Unprocessed future change recs for order SS50008TT/1A prevent del.
flag/completion
     Message no. CO688
Diagnosis
     There are still future change records or error records to be process
     from the confirmation for the confirmation processes in order
     SS50008TT/1A. Possible confirmation processes are:
     o   Automatic goods receipt
     o   Backflushing
     o   Calculation of actual costs
     o   Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status
with future change records that have not been processed.
edure
You should process the open future change records using
o   Predefined confimration process or
o   The CORUPROC program, by dispatching it in Customizing in
    background job (dispatch background jobs: dispatching proc
Check if incorrect goods movements or incorrect actual cost ca
exist for the order, and reprocess these if necessary:
o   Reprocessing incorrect goods movements
o   Reprocessing incorrect actual cost calculations

While applying patch 3653484 got error

Platform: "Windows 2003 R2 32-bit"
EBS: ""11.5.10.2"
Database: "10.2.0.4"
While applying patch 3653484 got error:
FAILED: file apwupg02.sql on worker 1.
FAILED: file apwupg02.sql on worker 2.
FAILED: file apwupg02.sql on worker 3.
FAILED: file apwupg02.sql on worker 4.
FAILED: file apwupg02.sql on worker 5.
FAILED: file apwupg02.sql on worker 6.
FAILED: file apwupg02.sql on worker 7.
FAILED: file apwupg02.sql on worker 8.
In the adwork001.log there are following error messages:
Start time for file is: Fri Aug 19 2011 12:09:44
plus80 -s APPS/***** @d:\oracle\prodappl\ap\11.5.0\patch\115\sql\apwupg02.sql &un_ap &batchsize 5 8
Error:
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system. l_report_header_id AP_WEB_DB_EXPLINE_PKG.expLines_headerID;
ERROR at line 19:
ORA-06550: line 19, column 26:
PLS-00905: object APPS.AP_WEB_DB_EXPLINE_PKG is invalid
ORA-06550: line 19, column 26:
PL/SQL: Item ignored
ORA-06550: line 20, column 24:
PLS-00905: object APPS.AP_WEB_DB_EXPLINE_PKG is invalid
ORA-06550: line 20, column 24:
PL/SQL: Item ignored
ORA-06550: line 106, column 4:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 106, column 4:
PL/SQL: Statement ignored
ORA-06550: line 107, column 11:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 107, column 11:
PL/SQL: Statement ignored
ORA-06550: line 118, column 21:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 117, column 6:
PL/SQL: Statement ignored
ORA-06550: line 149, column 47:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 149, column 47:
PL/SQL: ORA-00904: "L_DIST_LINE_NUMBER": invalid identifier
ORA-06550: lin
Time when worker failed: Fri Aug 19 2011 12:09:44
I found around 2500 invalid objects. Currently I am compiling Apps schema through adadmin. Meanwhile please suggest me any other solution if you have.
Regards,

Hi;
Wait until compile invalid than than restart worker and check patch log file, error exists or not
Regard
Helios

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

AD password change comes up, user changes password.
Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
""An error occurred in the underlying security system. Key not valid for us in specified state."
I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue. Now that I've got a second user with the same issue, its looking like a bug/issue and
not a random glitch.
Thanks in advance for any and all help with this!

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Got error "Object V_T001P is delivered by system HRDCLNT100"

Similar Messages

Maybe you are looking for