Error in RFC & to Solution Manager System
Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder
FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul
Similar Messages
-
Error importing SP in Solution Manager System (phase XPRA_EXECUTION)
Dear community,
I have a fresh installation of Solution Manager System 7.1 (central system) in a test environment.
During post-installation I wanted to apply SP (user DDIC, client 000), but my update queue via SPAM failed in phase 23 (XPRA_EXECUTION) and I have no idea how to handle that. Error message:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-70203INSAPBSFND, tp step R, return code 0008
To check the cause of the error it is recommended to choose Goto -> Log -> Queue.
Choosing Goto -> Action Log, I find:
Error during executing the tp command 'tp XPA ALL SOL ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors', tp output:
Choosing Goto -> Import Logs -> tp system logs, I find:
START EXECUTION OF REPORTS SOL R 20120104111325 DDIC biss-labor01
START tp_getprots SOL R 20120104111325 DDIC biss-labor01
ERROR SAPK-70203INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC biss-labor01
ERROR SAPK-70204INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC biss-labor01
ERROR SAPKITL701 SOL R 0008 20120104111335 STUSER DDIC biss-labor01
STOP tp_getprots SOL R 20120104111338 DDIC biss-labor01
STOP EXECUTION OF REPORTS SOL R 20120104111338 DDIC biss-labor01
An excerpt (3 lines) from ulog:
APServiceSOL 20120104122229 RFC: tp SHOWPARAMS SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
APServiceSOL 20120104122229 RFC: tp CONNECT SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
APServiceSOL 20120104122231 RFC: tp XPA ALL SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
What I already tried:
- retry importing
- stop and start the system, then retry importing
- check for background jobs (rdd* ) that failed via transaction SM37, but there are none that have been canceled
- reset buffers via transaction /$sync
Any input, suggestions or help is highly appreciated!
Regards
SönkeHi Sönke,
it seems we are making progress at last.
I'm afraid I didn't make my suggestion about splitting items very clear. I meant to say try applying your SPAM queue in several parts splitting up the packages affected so they are applied individually.
SAPK-70203INSAPBSFND
SAPK-70204INSAPBSFND
SAPKITL701
SAPKB70207
I think default behaviour for SPAM/SAINT is to calculate the entire queue automatically based on EPSIN but you can override this behaviour and choose to split your queue into shorter ones, you simply choose carefully the last package, apply this queue, then choose the next queue and so on until you are done. There used to be special notes which had recommended split points for package queues
EDIT: I checked your link and I don't think it is helpful unfortunately.
Best regards,
Mark.
Edited by: Mark Birch on Jan 11, 2012 2:07 PM -
Error in editing object: Error in RFC to Solution Manger System
Hi All,
Our System release is ERP 6.0 EhP4 and our DB is Oracle.
When we try to create or edit any object (eg: Function module, package, function group, tables) in our system and save it in a local workbench request, we are getting an error which states: Error in editing object: Error in RFC SM_<SID>CLNT<Client>_BACK to Solution Manger System.
Though we have deleted the RFC SM_<SID>CLNT<Client>_BACK, we still get the same error when we try to edit an object and save it in a workbench request. But when we save all these in a local object instead of a package we do not get any error.
Can any one please suggest some solution for this?? As we are held up in some critical activity.
Regards,
Yamini.Hi,
Not sure - but maybe a cross system lock seems to exist. Perhaps you can check this:
http://help.sap.com/saphelp_em70/helpdata/en/43/7227481a856fcae10000000a1553f6/content.htm
Or else create the Back RFC to SolMan and check how it proceeds.
Regards,
Srikishan -
Hi,
I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
Thanks in advance
AshishHi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish -
ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS
Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeemHi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok -
EWA: error message in CRM check for SAP Solution Manager system
Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name Status Date of first entry Entries
CSABUPA0000000070 READY 03.12.2007 45
CSABUPA0000000934 READY 07.05.2008 45
CSAIBASE0000000000 READY 23.11.2007 36
CSA_ORDER_8000000000 READY 22.11.2007 5
CSA_ORDER_8000000001 READY 22.11.2007 3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AMHi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH -
Solution manager system log - strange entries
Hi Everyone,
the problem we are facing in Solution Manager system log every five minutes appears a new error message:
2 Database error -30082 at CON
0 > SQL30082N Security processing failed with reason "24"
0 > ("USERNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
First of all the landscape: ECC, BI, CRM, PI and Solman. Each system is DEV, QUA, PRD - except Solution Manager.
Result of going to see the logs within work directory:
Connect to %_DCR_XXXXX as db2dcr with DB6_DB_NAME=DCR;DB6_DB_HOST=xxxxxx;DB6_DB_SCHEMA=SAPSR3;DB6_DB_SVCENAME=5912
C *** ERROR in DB6Connect[dbdb6.c, 1727] CON = 1 (BEGIN)
C &+*** DbSlConnectDB6( SQLDriverConnect ): [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USE
C &+*** RNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
C &+***
C &+***
C &+*** ABAP location info 'CL_SQL_CONNECTION=============CP', 337
C &+***
C *** ERROR in DB6Connect[dbdb6.c, 1727] (END)
C *** ERROR => DbSlConnect to 'DCR' as 'db2dcr' failed
[dbdb6.c 1732]
Some of the systems are being connected successfully and the error messages in SM21 are not related to those systems. But some of the systems like DCR cannot be reached. And this fact causing the error messages.
I haven't configured Solution Manager because I have joined the project later. I would like to know what job is trying to access the satellite system and for what purpose.
On solution manager side I have checked all the scheduled background jobs - all of them have been executed successfully.
There some of them are scheduled but it is hard understand what is purpose of the job.
I have checked and corrected system landscape through SMSY and have maintained all the RFCs. They all OK now.
What else could force to make a connection to satellite system? And where is the place where it is hardcoded local(satellite) db2 connection entry?
Like I said before, some of the systems are being connected but some not. The one which has not been connected - there was recently changed SAP master password. I believe this is the key to resolve the problem. But the system itself operating 100% correctly.
Perhaps it could be CCMS that makes some extra connections to collect the data from the monitored systems. But I have checked all the RFC's in SM59 and they were OK.
Any ideas or suggestions would be appreciated.
Thanks in advance,
Kind regards,
Artjom.Kaustubh Krishna,
thank you for respond.
It was dbacockpit. The connection was maintained with old db2sid password. And it was causing problematic log entries.
Problem was solved.
Points awarded.
Thanks,
kind regards,
Artyom -
The definition of the READ RFC to the managed system could not be found. Pl
Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PMHello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul -
Error message in "Check Solution Manager"
I'm running SolMan EHP1 SP6. The BI repository and Solution Manager are running on the same box. The BI repository is loaded in client 001. The System SID is PS4.
I'm performing the "Diagnostic Self Check" in Root Cause Analysis. When I select the "Check Solution Manager" button I'm getting an error message
Text = BI Setup check 'MYSELF_DEST' failed - Reason: ;Incorrect client 300; use BI client 001
Action = The CCMSBISETUP job was not completed successfully. Please run CCMSBISETUP again from the transaction solman_admin and/or adjust the corresponding BI objects in RSA1 if necessary.
In RSA1 the source system is defined as PS4CLNT001. So I'm not sure what the problem is.
It is my understanding that I can configure CCMSBISETUP in solman_workcenter by selecting "System Monitoring", then Setup, then Configure IT Performance Reporting. When I do this the default value for RFC destination from Solution Manager to BI: is set to NONE
The system requires and entry for the RFC destination from BI to Solution Manager - Does anybody know what RFC destination belongs here?Hi,
The CCMSBISETUP job was not completed successfully. Please run
CCMSBISETUP again from the transaction solman_admin and/or adjust the
corresponding BI objects in RSA1 if necessary.
Alternatively, please perform again Initial and Basic configuration
for SolMan by running transaction solman_setup. This should solve the
issue.
Notice that you must have the latest version (13) of SAP Note 1405878
applied in the solution manager system.
Hope this helps.
Cheers
SH -
Define Service Desk Destination in the Solution Manager System (Dump creen)
hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors SAPSQL_EMPTY_TABNAME
Except. CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time 13.07.2008 14:05:57
Short text
A dynamically specified FROM clause has an unexpected format.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSHI2" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
caught in
procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The running ABAP program attempted to execute an Open SQL statement in
which a FROM clause was specified dynamically in the field "TABLE_NAME". In
this
FROM clause, either a table name after a join operator is missing, or an
alias name after the key name "AS". The field "TABLE_NAME" could be empty as
well.
regardsHi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks. -
SAP NW 7.4 as java system sync with solution manager system 7.1 issue
Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance ThanksHi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak -
I got errors while installation of solution manager 4.0 sr2
I faced the errors below while installing Solution Manager 4.0 sr2.
How can I solve these problems?
Thanks.
ERROR 2007-03-13 17:30:12
FSL-00001 System call failed. Error 13 (Permission denied) in execution of system call 'openU' with parameter (/opt/cdler/CD2/IM_HPUX_PARISC/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (368) in file (syuxcfile.cpp).
ERROR 2007-03-13 17:30:12
FSL-02015 Node /opt/cdler/CD2/IM_HPUX_PARISC/COMMON/INSTALL/JDBCCONNECT.JAR does not exist.
ERROR 2007-03-13 17:30:12
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-03-13 17:30:12
FCO-00011 The step copyScripts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|copyScripts was executed with status ERROR .Hello Cemil,
The errors you are recieving are most likely user or permissions
related.
Can you please verify that there are 777 permissions on the
installation directories? Also are you installing as User Root?
Are you installing from an NFS Mount or network drive? If so it could be
possible that the user does not have enough permissions on this. If
so I recommend copying the installation files to a local directory and
retrying the installation from there.
Best regards,
Dolores -
Connect two Solution Manager systems.
Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike GelukHello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme -
Create messages on Solutions manager system it self.
Hi ,
On our customer solutions manager system we don't have access to directly log messages via the solutions manager itself, but from the customers ECC (SAP production system)
When we select Help --> Create support message, we get the error "You dont have authorization to create a support message".
Would any one know how this restriction is made where you restrict users from logging messages directly on SM.
Its it a standard role with authorisation. If so please advise the role.
Thank you & regards,
Harshini.Dear Harshini,
I dont know if in solution manager additonally a authorization is needed maybe you can ask one colleague by open a ticket under component SV-SMG* . For Service Marketplace your user id must have the authorization object" create sap customer message".
Best wishes,
Dragana Manojlovic
SMP TECH Senior Support Consultant II | AGS Primary Support | Global Support Center Austria
SAP Österreich GmbH | Lassallestrasse 7b | A-1021 Vienna | Austria -
Support message not getting reflected in Solution manager system
Hi,
In satellite system support message is getting created, message number"...." successfully created in service desk.
When i check in solution manager system in crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
What can be the possible problem.
Thanks & Regards,
Balaji.SHi Gurus,
Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
Thanks & Regards,
Balaji.S
Maybe you are looking for
-
Video Converter Compatibilty Output Codec?
Hi Gang Yes unfortunately I'm still in 10.4 which eliminates the capability to download any type of MTS converter software which I'll need to convert PAL to NTSC. 'ClipWrap2' and others are all designed for 10.5 or 10.6 Work Around: I also use a Dell
-
Crystal Reports XI: Using Wilcards with the Select Expert
I have a field with 10 numbers. There are several of them that start with three numbers and end in all zeros. I want to make sure these are not in my report. I have been successfully able to do this using the select expert, but it requires a lot o
-
OS X Lion volume custom mount point identified as Binary Document
Hi! I have a large partition for photos and i mounted it in home folder with /etc/fstab (using vifs): UUID=372A78A3-E57A-31AF-AF41-4732DB625394 /Users/vanburg/Photo hfs rw,auto It works great in Finder, but when i try to open it in Bridge it opens it
-
Life after fox splitter?
I love firefox, big supporter, converting friends, family and co-workers all the time. Working with 17" or 30" widescreens, I used Fox Splitter (formerly split browser) to divide my browsing in three panes, and opening more tabs within each pane. Eve
-
'Application Error' showing while playing games in...
I downloaded a couple of games for my Nokia C3.But while playing for sometime it showed an error 'Application Error' and then exited.In the details it showed Out Of Memory.I cant really figure out why this is happening. I tried a couple of games spec