Government Securities with different Interest Coupon Rates

Government Securities with different Interest Coupon Rates
For example, Company acquires  government securities with fixed interest frequency but different interest rates
Government Securities – 7% Maturity Period 1 year
Government Securities -8% Maturity Period 2 years
Government Securities 9% Maturity Period 3 years
How to configure the above requirement

Dear Krishna,
You can fulfill all your requirement with product type 04 series will be helpful.
There is no specific customization required in case you are using standard system.
Regards,
Jain

Similar Messages

  • What is the best way to deal with different audio sample rates on the same timeline ?

    what is the best way to deal with different audio sample rates on the same timeline ?

    You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
    For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
    If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

  • Problems with purchase of securities with capitalized interest

    After implement soft modification, we create an operation with capitalized interest and when  saved the
    operation not saved because showed the next mistake:
    Message no. TRQ0001
    SECURITIE IS
    FWZZ CAPT_CG210814
    The condition type are:
    263, 265, 266  and the conditions  102 with interest
    That is not logical because is the first purchase.

    The problem was resolved  by applying some notes.
    1595232 - Securities: Soft Modification – Capitalized Interest II
    1828513 - TRL: gross amortization procedure and fees
    1996329 TS01: TPM_TRL 203 error on bond issuance with capitalized interest condition

  • Have original iPad and just got iPad2 in same household with same email ID but with different interests.  How can we share purchased items, email and yet keep our own separate interests?

    We have iPad and ipad2 with one email address but two owners.  How can we share purchases, receive same email messages but have individual accounts at the same time?  Can we have same Apple User ID with different passwords?  Hepl!

    Aside from the fact that we have hijacked this thread - which we really shouldn't do - you would probably be better off posting questions or seeking advice in the iCloud portion of the Apple Support Communities. I'm sure that there are a lot of more experienced iCloud users on that site than I am.
    I'm not a big believer in iCloud at this point, so my experience with it - other than downloading past purchases - is really pretty limited. I would not want to steer you down the wrong path.
    However, here is the Apple iCloud support website that is loaded with all sorts of information and links to even more information. This will get you started anyway ....
    http://www.apple.com/support/icloud/

  • Product type for securities with Variable interest and unit quoted

    Hello,
    Somebody knows, Wich product  type can I use to manage securites,  where I could calculate variable interest at the end of the month and calculate purchases and sales by units?
    I try to use 04H with this product I can calculate the variable interest at the end of the month but I can't used to purchase or sale with units.
    Thanks for your help,
    Adriana

    Hi Ravi,
    I followed your instructions.
    In SPRO->Treasury and transaction management->Transaction management->Securities->Master Data->Product types->Condition types. I created the followed condition types:
    999 Variable interest             TZST
    998 Int. rate adjustment 999  ZA
    Then in Created a new condition grup (99) and assing the Conditions types: 999 & 998 to the group 99
    I Created a new product type Z43 and assigned the condition group 99
    Then in,
    In SPRO->Treasury and transaction management->Transaction management->Securities->Position Management->Securities Account Management->Update Types->Assign Update Types to Condition Types
    In Active Pos:
    999 Variable interest  TZST Incoming payment with positive position 5009 (incoming)
    Thanks,
    Best regards,
    Adriana

  • Open Item interest calculation with different exchange rate for each line

    Dear All
    We have a short term loan facility with our Bank. We take short term loan with bank on different terms and condition. Now user has requirement to have different interest rate for each open items depending on the posting date or any other condition. I think in SAP for one bank account only one rate is applicate for validity from date.
    Can someone share his/her experience if got the same requirement from user
    Thanks and Best Regards
    Farhan Qaiser

    Dear Ashwin,
    As of overdue days are concerned there is no standard functionality available whereas there is for amount.
    Better solution is that you get an ABAPer create your own functional module. That will help you in better way.

  • How can I edit multiple clips with different frame rates on the same timeline

    how can I edit multiple clips with different frame rates on the same timeline

    You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
    Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
    You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
    The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
    Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
    Have fun.
    x

  • How to roll over deposit at notice with zero interest rate ?

    Hello All,
    There is a requirement from client that they want to roll over deposit at notice with zero interest rate (Tcode TM14).
    However when we enter zero in interest percentage rate field, system still ask us to enter the interest rate (Error message number T4034) being a mandatory field.
    Following are additional details:
    Product Type   = 52B
    Transactn Type = 100
    Condition Type = 1200
    Activity =  801
    Do you know how to roll over a deposit at notice with zero interest rate in TM14?
    Is it possible to create new condition type which will allow zero interest for a deposit at notice at the time of roll over?
    Thanks,
    Vaishali

    I am not able to check it, but my thoughts are - mandatory field status is a problem.
    It is possible to enter zero interest condition - just enter new condition starting from new date and leave percentage field empty or enter zero value ( zero value = empty field). But the problem is that percentage field is mandatory as you mentioned.
    Possible solution: switch off mandatory status and create implementation of BADI to check if field is filled (for example  Check entry of deal's data.) and if not - issue an error that there will be zero condition.

  • Parallel acquire 2 signals with different sampling rate on 2 cards

    Hi NI,
    I have cDAQ-9178 and NI 9221, where sample rate is 10kHz and NI 9219, where I need sample rate about 10Hz, it's possible this confiruration for parallel acquire?
    Thank you.
    Neolker

    Hi Neolker,
    Do the tasks need to be synchronized or are totally independent tasks?
    If the tasks are independent, than you basically have to create two different tasks, even in two different loops that will run with different sampling rate.
    You can have them in the same loop the reading if you assure that the data are transfered in chunks to application memory according to tha sampling rate (Ex. for 10kS/s rate you can transfer data with 1kS chunks and for 10S/s rate with 1S chunk).
    If  you want to synchronize them, you will need a counter that will divde the sample clock from 9221 and route it to 9219.
    Let me know if you need more help.
    Best regards,
    IR

  • Single invoice for multiple orders with different exchange rates

    Hi Gurus,
    We have a situation where the client wants to bill two orders together but both have been created in different months and have different header exchange rates.
    Can someone advise if we can combine these orders / deliveries into one invoice if
    (a) pricing dates & order creation dates are different
    (b) exchange rate of order header differs for both orders
    If standard behaviour is different, can someone advise how it can be manipulated to suit our requirement which is to have 1st exchange rate on those invoice items coming from 1st sales order and 2nd rate for those invoice items coming from 2nd sales order.
    Thanks & Regards,
    Krishna
    SAP SD

    Hi,
    the date will not affect the consolidation of orders to a single invoices provided yur bill to party and all other details are same in both the docuemnts. But due to the exchange rate differences it may split. You can try the same in your test system. If it is splitting the invoice then you need to modify the requirement used in the copying control from order to billing to allow the same.
    Prase

  • COPA Document with different exchange rate

    Hi
    We have created a Sales Order in 2007.
    Now in 2008 we have raised credit request for this order. The accounting doc generated correctly and currency translated as per the exchange rate maintained in the table as on today.
    But the copa document generated with the exchange rate of 2007.
    Can you please let us know is it the correcy way of behaviour or the COPA doc also should generate with current date exchange rate.
    Thanks and Regards
    RS

    Hi Ram
    Thanks for your reply.
    This is my scenario.
    The company code currency is THB.
    The second local cuurency is USD.
    The Operating currency is USD.
    Reporting Currency is USD.
    We have created a Sales order in December 2007 for currency THB. The billing document and accounting document also generated in the same year. The exchange rates are picked correctly as per the exchange rate table.
    The exchange rate is @42. The COPA document also created with exchange rate @42.
    Now in the month of January a credit note created against the order. The accounting doc generated @32 as per the exchange rate tables. But the COPA document generated with exchange rate @42.
    This is happening only for the credit notes.
    Can you please let us know is this standard behaviour or something wrong with customization.
    Best Regards
    RS

  • Government Securities - SAP Treasury Securities

    Government Securities
    Government security INR 100000
    Government Securities Maturity Period:  3 years from the date of subscription i.e. Jan 2014
    Interest on Government Securities: 8%
    Interest frequency: Bi-annual (june 30, Dec 31)
    Here, what are the steps required in the key date valuation like (amortization procedure, security valuation, One step price valuation etc)
    Currently, i am following below steps
    TRS_SEC_ACC: Securities account creation
    FWZZ: Security Class
    TS01: Purchase
    Sale of Security
    Interest Update and Automatic Debit Posting

    Dear Krishna,
    I'll try to answer in steps.
    1) Master data creation.
       a) Security account creation: TRS_SEC_ACC
       b) Security class: FWZZ
       C) Business Partner: BP
    2) Create a deal- FTR_create or TS01
    3) Settle deal: FTR_edit
    4) Posting : TBB1
    5) Period end activities:
      a) TPM44
      b) Update market price: FW18
      c) FWZE/FWSO
      D) Armotization (TPM1)
    Mention above are basic activities need to performed for securities accounts
    Answering to your question about the steps of key date valuation- Its based on what customer requirement, whether they want mark to market or ect. Please check with user department for the same.
    I  hope  this will help.
    PS: all the setting related with key date valuation will he taken care by consultant.
    Regards,
    jain

  • How can I use different calendars associated with different emails to see appointmen​ts separately​?

    I have 3 emails accounts on my Blackberry curve. I want to use different calendars for different type of reminders/appointments. How can I do that? In calendar I pressed menu key and then clicked on select calendar, choose one email address (email 1) then entered an alarm but now if I go to a different calendar associated with different email ( email 2), it also shows me that alarm which I entered in email 1 calendar. Thanks for help

    Don't have LV handy to open the old code, but I did read through the thread you referenced.  It sounds like the example configured 2 counters to create the variable-freq finite pulse train and configured a 3rd counter to count the # steps generated as verification.   That 3rd counter would be a problem for you as there is no internal timing signal connection between your 2 USB devices.  You would need to run a physical wire connection and change some of the config code to match.  Alternately, you could just delete all the code associated with the 3rd counter for now because it isn't strictly necessary.
    Further advice/questions:  Are you planning on a pure sine wave of frequency such that you oscillate with both positive and negative velocity (example: varying from -1000 to +1000 Hz clockwise)?  Or is there a nominal average frequency with a small sine wave superimposed (example: nominal of 1000 Hz clockwise, variation of +/- 50 Hz)?
    I *think* you may be dealing with more of a continuous pulsetrain situation, which is actually much simpler.  You would only need 1 counter/timer, though you would still perform the freq changes in a timed loop which uses the pulsetrain as its timing source.  You'd just need to keep track of your total elapsed time so you could figure out the right sinusoidal freq value at the moment you're ready to update it.
    Another subtlety to watch out for if you're oscillating about 0 velocity  -- don't try to create a frequency that is lower than the rate at which you need to update.  Also, with steppers you may have mechanical stability issues at low freqs like 10's to low 100's of Hz.    These kinds of things may need to be managed as special cases which force you to deviate from a "pure" sine wave.
    -Kevin P.

  • Unable to clear vendor with different currency being posted

    Dear Experts,
    One of our vendor's Invoice billed in currency USD, several payments has been posted with different currency according to our Bank currencies. Full payment has been made to the balance of ZERO, but we still unable to clear this vendor account. Any expert can help me how to clear the above mentioned vendor.
    Regards/Lisa

    Hi,
    Please check whether the customisation for exchange difference accounting has been done.  If so then
    T Code is F-44 or F-04
    Either use Local Currency. : In this case if there is any exchange rate difference between the invoice and payment date the difference will be posted to exchange diff account.
    Or Use the Doc Currency : In this case you can provide the exchange rate in the transaction so that you will not get any exchange rate difference.
    Hope this solves your issue.
    Regards
    MPI

  • Define Multiple Taxes with different Accounts

    Dear Members
    I have defined tax in Oracle R12 . and defined multiple rates. these all tax deducted in a single Tax account. but my requirement is, there should be multiple taxes with different acccounts. when I define multiple taxes the system gives error unable to Calculate the tax. when I only enable one tax it works.
    Current sanario tax rates
    2% Account # 666461
    3% Account # 666461
    3.5% Account # 666461
    Required Sanario
    2% Account # 666461
    3% Account # 666462
    3.5% Account # 666463
    Should be different
    Do you have any Idea How I configure it.

    Hmmm, thought I did that but ran into issues...Will give it a harder look.
    Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too...

Maybe you are looking for