Traditional DAQ and SCXI 1530 model name

Hi all,
I am using Labview 6.1 and Traditional DAQ 7.1. I am working on one system with one DAQ card (PCI 6052E) and several SCXI cards(1520, 1530). All the SCXI cards are installed correctly because MAX can detect them all.
I want to make a program with Traditional DAQ which can detect all the SCXI cards and show their model names on the front panel.
I found in Tradtional DAQ, there is one VI called "Get SCXI Information" which returns the model types of SCXI cards, something like, 50, 51....
I found in the help file of "Get SCXI Information" VI there is some kind of the configuration file saying 51 stands for SCXI 1520. What does 50 stand for? Where can I find the complete configuration file or somehow can I change it? Like make 51 stands for something else...
Any ideas are highly appreciated.... Thank you all!
Solved!
Go to Solution.

This is a duplicate of the last post in this thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=53087
Brad Keryan
NI R&D

Similar Messages

Does NI PXI-6259 support both Traditional DAQ and NI-DAQmx of Labview 7.0 Express?

I need to buy a Multifunction DAQ board which will be supported by both the Traditional and NI-DAQmx of Labview 7.0. Is the NI PXI-6259 appropriate for such application?
Thank you.
Ujwal

M-series boards are not supported by Traditional NI-DAQ. Stick with the E-series if you require Traditional support.
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com

Is there any incompatibility between Labview 8.5 and Traditional DAQ?

Hi, I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
Thanks.

First, you posted to the wrong board. Measure is an old add-on for Excel.
Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

How to simutaneously use 2 PCI cards, one with traditional DAQ, the other with DAQmx?

Hi,
I am currently trying to debug a system that used to work.. but sadly isnt anymore
A single computer contains 2 PCI cards (6110 & 6036E). The 6110 card is controlled by a fairly old software, programmed in labview, and hence, using Traditional NI-DAQ. The 6036e card is controlled by a more recent soft, programmed in LV as well but using DAQmx.
the AI/AO of the 6110 card is only momentarily used (20 sec consecutively, every minute) while the 6036E card is continuously receiving and sending data on its AI/AO.
Now the problem: the program that control the 6036E card freezes every time that the old prog access the 6110 card.. and then it works again perfectly until the next time that the 6110 card is used.
So my question: how can I make those 2 cards work simultaneously?
I dont think that it is because of the software nor because of the computer lack of memory/CPU if it used to work in the past. It might be about a wrong configuration of cards in the MAX but I couldnt find anything wrong there (no problem when accessing AI/AO of both cards through "test panel")
Thank you very much for you help.

That's what bugs me. The only thing that those 2 cards share is an AO of the 6110 connected to an AI of the 6036.
For the rest, nothing is common. The 1st program only deal with device1, while the 2nd prog only access dev2. There shouldnt be any problem and everything is working fine separately. Hence, why I was wondering if the traditional daq and daqmx might conflict on a same computer.
I just cant find out why the 2nd program controling the daqmx card just freeze everytime the 1st program access the traditional card. It actually doesnt freeze completly but becomes soooo slow, with about only 2 iterations of the main while loop during those 15-20 sec (instead of the normal 3-4000 iterations during such a period).
The computer specs are a 2.2ghz proc for 1G of ram and running XP, so it should be ok.. even though the computer does slow a bit down when the 1st prog access the traditional card.

Up/down count edges: traditional daq vs daqmx

Hello,
I've inherited a program that uses an encoder to read the position of a torque-arm. The program uses traditional daq. The encoder position data is read using "Counter Read Buffer.vi". Then, by simply casting the output of "Counter Read Buffer.vi" to an I32, the position data can be either positive or negative.
1. Is this a valid method of using "Counter Read Buffer.vi"? (I wonder because if I capture data as I move the torque arm back and forth, the data suggests that the encoder is not moving back to zero counts each time. For example, the first time the arm is moved through its range, it might go from 0 counts to 100 counts; the second run may be from 10 counts to 110 counts, the third from 15 to 115 and so on).
2. Is something this simple available in DAQmx too, or do I have to monitor each encoder point that I read to detect when the counter rolls over and handle it manually?
Thanks in advance for any assistance!
Chris

Hello Chris,
For the answer to your first question, this may be an issue with the DAQ device you are using. What exact device are you using?
For the second part, the Measure Angular Position VI, found in the Example Finder under Hardware Input and Output»DAQmx»Counter Measurements»Position, is a good quadrature encoder VI for reading angular position.
Try using this example and see if the behavior is different between the Traditional DAQ and NI-DAQmx code and let me know how it goes.
Regards,
Dan King

Just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:     iMac   Model Identifier:     iMac7,1   Processor Name:     Intel Core 2 Duo   Processor Speed:     2 GHz   Number Of Proces

just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:
iMac   Model Identifier:
iMac7,1   Processor Name:
Intel Core 2 Duo   Processor Speed:
2 GHz   Number Of Processors:
1   Total

Open Console in Utilities & see if there are any clues or repeating messages when this happens.

I have a MackBook A1181 I need to upgrade my Safari so Outlook will work and would like to get some kind of word/writing tool on it... the info is: Model Name:     MacBook   Model Identifier:     MacBook1,1   Processor Name:     Intel Core Duo   Processo

I have a MackBook A1181 that I bought off Ebay :/ it came with pirate discs and no info....I need to upgrade my Safari so Outlook will work and would like to
get some kind of word/writing tool on it... the info is:
Model Name:          MacBook
Model Identifier:          MacBook1,1
Processor Name:          Intel Core Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per processor):          2 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB11.0061.B03
SMC Version:          1.4f12
Serial Number:          4H631CVDU9B
Sudden Motion Sensor:
State:          Enabled
Can anybody help?!

First correct the pirate disc issue. Buy OS X 10.6 Snow Leopard from Apple for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Snow Leopard is the latest version your macbook 1,1 will run. Oitlook is part of the Microsoft Office suite, if you want outlook you'll need to also purchase Office. If you can get by with Apple's mail program there are free alternatives to Office like Libre Office or Open Office.

CIF - Integration model name and APO application

Hi Experts,
In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
What is the transaction to customize/Create the new Model name and APO application.
Hope this is very simple question to you and expect your soon.
Thanks,
Saravanan V

Hi Somnath,
Thanks for ur reply.
First I saved the selection as variant. But it was not updated in the IM table.
Then I tried to generate the model and now I can see the details when I use the F4 help.
So, to create a integration model need to generate the variant once.
Thanks for the confirmation.
Thanks,
Saravanan V

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I think you're asking 2 different questions.
The PID control toolset is for using PID loops for control; it's just software.
The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
Mark

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Hi I bought a macbook in 2007/2008 and am wondering if it is possible to update the operating system? Here are my system details: Hardware Overview:    Model Name:     MacBook   Model Identifier:     MacBook4,1   Processor Name:     Intel Core 2 Duo   Pro

Hi, I bought a Macbook in 2007/2008 and am wondering if it is possible to update my system so I can get the new version of iTunes?
Here are my current system details: Mac OsX Version 10.5.8
Hardware Overview:
Model Name:    MacBook
Model Identifier:    MacBook4,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.4 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    2 GB
Bus Speed:    800 MHz
Boot ROM Version:    MB41.00C1.B00
SMC Version (system):    1.31f1

The model 4,1 can run a maximum of 10.7 Lion. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade from 10.5 to 10.6 with no problems as long as you have at least 1gb of RAM. Any program that runs under 10.5 should run under10.6. See this list for third party programs compatibility with 10.6: http://snowleopard.wikidot.com/ You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications
http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. Or go to http://store.apple.com/us/product/D6106Z/A/os-x-lion and purchase it there. The price is $19.99.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

How to synchronize NI-Scope and traditional DAQ

I use a PXI-1042 System with a PXI-5124 Ni-Scope Card and a PXI-6120
with traditional DAQ controlled by a PC running WinXP and LabView 7.0
The intention of this setup is to make synchronized acquisition with
both cards with different sample rates. For the sake of an example let's
assume the NI-Scope runs at 100MS/s and the DAQ (6120) with 100kS/s. The Trigger is generated by
analog triggering of the 6120. I'm looking for a solution to garanty
that for a STOP trigger with post-trigger scans the last sample of the
6120 coincides in time with the last sample of the NI-Scope 5124 card.
Or to put it in more general terms a way to identify which of the 1000
Samples the 5124 Card takes in the sample interval of the 6120
coincides with the respective sample of the 6120 ? The point is to have
a time resolution (for phase difference measurements) better than that
given by the samplerate of the PXI-6120.

Here you can find an example that shows how to synchronize a DAQ-Device with a Scope-card:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2C556A4E034080020E74861&p_node=175382&p_source=External
Hope this helps.

My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:     iMac   Model Identifier:     iMac4,1   Processor Name:     Intel Core Duo   Processor Speed:     2 GHz

My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:          iMac
Model Identifier:          iMac4,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.

If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.

I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file and all the latest event files, can you help how to solve the problem? Thank you Model Name iMac    Model Identifier:     iMa

I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file and I lost all the latest event files, can you help how to solve the problem? Thank you
Model Name:     iMac
Model Identifier:     iMac8,1   Processor Name:     Intel Core 2 Duo
Processor Speed:     2.4 GHz

http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

How to get all the Model name and Entity name through programmatically

I am using this code to get Model name
clientProxy = GetClientProxy(mdsURL);
ModelMembersGetRequest request = new ModelMembersGetRequest();
ModelMembersGetResponse response = new ModelMembersGetResponse();
response=clientProxy.ModelMembersGet(request);
Model member count i am getting zero
Error count is 1(required parameter is missing)
please help me to resolve the issue

The model/entity/attribute name can be retrieved by MetadataGet.
You can found some sample code here:
http://sqlserversamples.codeplex.com/wikipage?title=SQL%20Server%202012%20Master%20Data%20Services%20

Traditional DAQ and SCXI 1530 model name

Similar Messages

Maybe you are looking for