GP Process is Running even though Callable Object Encountered Error

Hi Everyone,
I am experiencing an interesting issue working with GP right now and it bothers me.
I have created a process that includes a sequential block with a few actions including an action that sends out an Adobe form. I noticed during testing that even if the callable objects encountered technical exception (found in the logs), the process itself is not marked as erroneous. This bothers me because I'd like to see the process marked as erroneous if the callable object has errors.
Has any one experienced this? Is this the "expected" behaviour? I am on SP18 ... is this fixed in a later support package stack?
Thanks for any input.
Robert

Similar Messages

Process Chain running even after end date

Hi,
We are scheduling month end PC to run every 2 hours and also we have given end date for today evening.but process chain runs even after end date for every 2 hours.so we have to manually remove it from scheduling.
Any method how can PC stop on its own after end date .
Any help highly APPRECIATED
Thanks
Nilesh Pathak

There might be multiple release jobs for thie process chain.
So check the same. Right click on process chain --> Display scheduled jobs --> Here all the jobs logs of the chain will be available.. So check the same here...
As you have descheduled it now.. probably you may not be having it as the first release job might be moved to Schedule status as soon as the END date has reached and then second one might have gone when you have removed the chain from Schduling..
Anyway check the same.. and also check in SM37 whether any other user has triggered it manually today or not?

HT1386 I have iphone 4, and couldn't update to ios7.1.1 even though its downloaded, gives error message as not connected to internet, even though am connected

I have iphone 4, and couldn't update to ios7.1.1 even though its downloaded, gives error message
Unable to verify update
ios 7.1.1 failed verification because you are no longer connected to the internet
Close Try again
Event though I am connected to the net
Tried repeatedly but frustrating. Am able to do the same in another iphone 4 which my brother has....Do not know what setting to change. Even cant update via itunes

Hi GajaPsy,
If you are getting errors or alert messages when you try to update your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden

TS1424 I've just downloaded an album and at least two tracks are incomplete, even though there was no error in downloading

I've just downloaded an album and at least two tracks are incomplete, even though there was no error in downloading reported.

Depending upon what country that you are in (music can't be re-downloaded in all countries) have you tried deleting them from your iTunes library and redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes ? Re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

Clamav running even though virus filtering is disabled

greetings all,
I am running an OS X Server 10.4.8 machine. I have virus filtering turned off, and with good reason - when it is on, there is a big performance hit. However, this afternoon clamav randomly clicked on, even though virus filtering is still disabled. I wasn't even working on the server - I only noticed because my monitoring software alerted me to the increased CPU usage. Any ideas as to what could have caused this behavior, and what I can do to reverse it?

OK. This is due to how Apple's default configuration is set up.
amavisd is the content filter and as such responsible for passing mail to spamassassin and/or clamav. On a standard installation, if you turn of virus scanning it will basically only turn of virus database updates, but amavisd will still call clamscan (without reporting anything back or taking any action).
You have several options.
1. Turn off content filtering altogether. Not a good idea as you would be buried in spam.
2. Edit /etc/amavisd.conf and comment out (put a "#" in front of the lines)
### http://www.clamav.net/ - backs up clamd or Mail::ClamAV
['ClamAV-clamscan', 'clamscan',
"--stdout --disable-summary -r --tempdir=$TEMPBASE {}",
[0], qr/:.*\sFOUND$/, qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
(May look slightly different on your system.)
Restart after doing this.
3. Re-Enable virus scanning and find out why it so heavy on your resources. A properly configured system shouldn't have any major issues (unless you have 100'000 mails a day on underpowered hardware). Make sure you have postfix reject as much rogue mail as possible, before it even hits the content filter.
(There are plenty of threads on this around).
Alex

Interactive Form/File Approval Callable Object - %PDF- error

I have a GP which send out an Adobe Form via E-mail and waits for a response.
When the form is returned, I want to render the Adobe form from the UWL as part of the task.
I understand that the Process Control - Interactive Form/File Approval Callable object can be used for this.
However, when I try to open the task I get an error message saying the File does not start with %PDF-
Looking at the process context in the NWA, I do see the PDF binary content at that step.
Any ideas?
I have followed an example setup as shown on:
http://help.sap.com/saphelp_nw04s/helpdata/en/0a/964dfc764b4a428f4321f1ba33dbdd/frameset.htm
Thanks
Hennie Pieters

Thanks a lot Greg for the response.
If the output of an interactive form includes a structure called 'Interactive Form' with the attributes you mentioned, that will serve my purpose.
However, I am not seeing these fields any where in the default output of MY interactivev forms. Do I have to do something explicitly to see it in the output.
I would appreciate your prompt response.
Thanks
Ram

GP Background callable object. Error while making a Callable object

Hi,
I have implemented a Background callable object and deployed it to the server.
When I try to make a Callable object of this from the Design Time tab in GP, i get the following error msg.
*Class does not correctly implement the required interface*
The detailed error msg is as follows
Full Message Text
Unable to load the required classes. Check all the references to other modules, especially the GP API
com.sap.caf.eu.gp.base.exception.EngineException: Unable to load the required classes. Check all the references to other modules, especially the GP API
at com.sap.caf.eu.gp.model.svc.impl.EngineClassloaderImpl.isClassAvailable(EngineClassloaderImpl.java:101)
at com.sap.caf.eu.gp.ui.co.config.bkgd.COCfgSelect.OnCanLeaveScreen(COCfgSelect.java:293)
Pls help.
Tx in advance

The problem was resolved after retrying many times. Code was checked again and redeployed. Server restarted as well. GP objects deleted and steps repeated. It worked in the end.

Aperture Unable to process RAW files even though finder shows a preview

I have recently upgraded to Aperture 3.0 which decided to delete my library. Using PhotoRec i am slowly recovering all of my files.
The files that have been recovered are .cr2 files and .jpg files. The jpegs display fine without a problem however every 2 out of 3 cr2 RAW files will not import into iPhoto, Aperture or pretty much any other RAW processing software. Aperture just says "Unsupported File Type".
My issue is that Finder is showing a preview of the image in the icon, and is showing a preview in CoverFlow, but everything refuses to open the file. This must surley mean that the data is still intact within the .cr2 file? else Finder would be unable to display the preview of the file?
Does anyone know how to fix this or what could be causing this issue?
Apple please, please fix this issue with Aperture, I fear that I have lost a lot of photos in this process.
Please help!

Aarthek - the Canon PowerShot G2 is not supported centrally on your Mac.
http://www.apple.com/aperture/specs/raw.html
I've just finished importing my old archive produced by this camera. What I did was to produce fresh JPEGs (medium quality, so low file size) in the same directory as the original RAW images. I happen to have Photoshop CS3 and could easily do these in batches, but worst case, you should still have Canon's ImageBrowser suite which could do this. I then imported the JPGs for cataloguing, keywording, etc. Then, if I want to do some serious work on an image from my G2, I'll right-click the image and select +Show in Finder+ and get straight to my corresponding RAW image which I can then process in Photoshop.
but I don't understand why the thumbnail shows up when I'm importing as though there are no issues.
There's a small embedded JPG in the RAW files and that's what you're seeing. I think that's also what you saw on the G2's display when you were out shooting and stopped to review an image in the field.
Regards,
Gary

Everytime I close Firefox and then try to reopen it, it says that I am unable to do so as Firefox is already running (even though it's closed) and I have to restart my laptop all the time.

For about a week now when I have closed Firefox down then I try to reopen it the screen message states that Firefox is already running and I have to restart my laptop every time. This is becoming very frustrating and time-consuming.

I have the same problem on my notebook but I don't restart. Just do the control, alt, delete and bring up your task manager. Then scroll down to Firefox, end process and close. Now you should be able to restart FF. Not a fix but better than having to restart your laptop.

Im having a hard time getting AE to run even though I know it should

Hey guys, Ive been starting to try and get into using after effects. I have put lots of stuff together in premiere pro and want to add some effects but i can hardly get it to even playback the file in the preview window, won't even scrub through hardly.
Premiere pro cs6 runs smooth and renders out iin good time.
My system specs are:
I have changed a few settings while playing around as per some pages I found on here about ram allocation and CPU stuff heres thos settings.
Im kind of at a loss with what else to do... Any thought are appreciated, I have a ssd on the way but Im not sure It will make all that much of a difference
Thanks
Elliott

"...i can hardly get it to even playback the file in the preview window, won't even scrub through hardly. Premiere pro cs6 runs smooth and renders out iin good time."
I hope you don't expect AE to work like Premiere. It doesn't.
There's nothing wrong with your machine or with your software that's immediately apparent, either.
Premiere does one thing, AE does something else. They don't work the same. You don't use them the same way. AE is a totally different application than Premiere, and just like Premiere, you have to begin at the beginning if you want to learn it. People who try to use AE intuitively end up failing about 90% of the time.
So here's a good place to start.
I STRONGLY recommend you use it and you don't blow it off. If you do, you're only hurting yourself. Seriously.
I don't care how good you think you are, you'll miss some important detail vital to using AE, and your work will come to a grinding halt.

I downloaded firefox,i cant get it to open, yet when i tried to delete it, windows explorer says firefox is running, even though i have no internet on

i was at a hotel using wireless, but suddenly my computer shut down, saying something about a blue screen, when i turned it back on, it wouldnt fully load the games i play on facebook, so i tried a lot of things, then i downloaded mozzilla, nothing happens when i click on it so i tried to delete it but my computer says its running and i have to close it first, but i cant cos i cant get it to open!!!!!!!

Many thanks for responding. Your suggestion led me to this website:
https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
which infers the problem exists and seems to confirm the only way is to restart the machine.
Not being computer literate I cannot tell whether or not you can get around the 'lock/unlock' problem! What I need is an easy 'fix' but there does not appear to be one!!
Thanks for trying!
Cheers
Mike Barker

Time Machine still running even though it is switched of.

I just did a fresh install of SL. I have sleeping problems (my MBP that is ☺ ) and in trying to solve this I switched TM of to see if this is he culprit.
Having done this it just keeps running as if it was switched on. Any suggestions how to fix?

ChangeAgent wrote:
Huh? What password? What are you backing-up to? Something on a network?
yes!
What?
And what, exactly, is the message?
If it's a Time Capsule, your keychain may be corrupted. From Keychain Access, select +Keychain First Aid+ and repair it.
That setting is not in the /Library/Preferences/com.apple.TimeMachine.plist. It's in one of the +Launch Daemons.+
oeps! but you said above:
That sounds like the preferences file is corrupted. Try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting (or use the link in User Tips at the top of this forum).
Correct. The file there is /Library/Preferences/com.apple.TimeMachine.plist. It has the destination, exclusions, and various other things, but does not contain the interval.
No such Launch Daemon in /Library/LaunchDaemons
Also correct. There are four of them, in System/Library/LaunchDaemons. Do NOT fool with them unless you know exactly what you're doing.

My event is saying background activities are running even though they aren't- it wont let me import clips to that event or make a multicam clip. what should i do? ( i had deleted some clips from this event that were elsewhere)

Some clips somehow showed up in one of my events that belonged elsewhere. I deleted them from this event. Now it says background activities are running and wont let me import a file to start a multicam clip.
Thanks

Some clips somehow showed up in one of my events that belonged elsewhere. I deleted them from this event. Now it says background activities are running and wont let me import a file to start a multicam clip.
Thanks

Starting Process by Using Web Service callable object

HI,
I have created Web service CO for starting a predefined process (let call it Process2).
I am using this Web Service CO in another process i.e. Process1 (Main Process).
When execution of Process1 reaches to action where Web service CO is Attached. It's Initiating the Process2.
My Problem Is Process2 is initiated by some "Guest" User instead of processor of that action.
Plz help ASAP.

NO answers, so closing this thread

HT201210 how can i unblock my ipod even though it says 3194 error?

how can i unblock my ipod on itunes if it still says error3194?

how can i unblock my ipod on itunes if it still says error3194?

GP Process is Running even though Callable Object Encountered Error

Similar Messages

Maybe you are looking for