GR/IR Account is not being credited with po net price

Hi Experts,
While posting Goos Receipt ,GR/IR amount is not equal to PO net price.MRP indicator is on in excise tab, If MRP indicator is on then GR/IR value decreases as comparitively PO net price.
But this GR/IR value is so low than PO net price.
I checked Info record,contaract value also but rates are OK.
Can anybody guide me on this, why this GR/IR value is too low.
With Kind Regards...
Trupti

Hi Sanjoo,
in my case MRP indicator is on and you are right,if MRp indicator is on then GR/IR amount is less than PO net price,
I calculated with that price also but it not work.
Actually while posting the GR
System calculated WRX 29505.22 INR and PRD 563210.68 INR
But WRX should be 563210.68 INR and PRD should 29505.22 INR
In this case system calculated wrong price.
Plz guide me on this why system shuffle wrong price with WRX and PRD.
Thanx ...
Trupti

Similar Messages

Just noticed a recurring pattern of not being credited my $5 pre-order deposit.

The other day I was going over some of my Best Buy gaming purchases this year through MyBB, and noticed for one game, Project CARS on PS4, I was charged an additional $5 for the pre-order bonus (noted as "POB") which should have been free. I contacted customer support and was told I'd only be able to get a refund w. receipt in-store, and it was up to the store's discretion. As I didn't save a recipt from May, I figured it was a loss and not worth trying to make a case over $5.
Then I noticed something else. As a Gamers Club Unlocked member, all new release $59.99 games go down to $51.35 ($47.99 + tax) when the 20% deduction is applied. When accounting for the $5 deposit to reserve an in-store pre-order, the game should work out to $46.35 after tax if the transaction is processed properly. However, going through new release game pre-orders, I noticed that almost every single game I pre-ordered for in-store pickup this year was processed incorrectly and I was charged $51.35 due to not being credited the depsoit I had already paid. I didn't realize at the time, but now it appears as if has been the case for four pre-order purchases, which when added to the $5 I was charged for the pre-order bonus, works out to a $25 total overcharge. Is there any way to try and get my money back on this at this point or no? As some of these purchases were from months ago, I don't still have the receipt and even if I did, would be past the return window (though this wouldn't be a typical return issue).

Hi Jay86,
You certainly shouldn’t be running into so many issues with pre-order deposits at your local Best Buy. I’m familiar with hiccups with these in the past, but I haven’t heard anything for quite some time now. Our systems are setup to automatically apply your $5 deposit to the final transaction when a game releases, so this leads me to believe that some of your pre-orders aren’t being fulfilled properly at the store level. I’m very sorry if this has occurred on any of your pre-orders!
Like others have mentioned, your local store should be able to refund any pre-order deposits necessary. We also have the ability to locate previous pre-orders/receipts, so I wouldn’t worry too much about that. Considering the timeframe here, you may want to ask to speak with someone from your store’s leadership team as well, should you run into any issues.
Please feel free to let us know if you continue to run into issues with this.
Best regards,

Iphone 4 not being recognized with the extension cable

My Iphone 4 is not being recognized with the Apple extension cable in my new Nissan Juke so the phone has to be kept in the glovebox due to the very short cable Nissan provides. This is frustrating since the phone gets noticeably worse reception in the glovebox. Does anyone know of a fix for this so I can run a longer cable extension and run the phone out of the glovebox? Mabye a different extension cable or longer cable that works with Nissan's set up?

I don't think it is the cable. I have tried plugging the cable into the USB cable that came with the phone and the extension cable works fine with it. I guess this really is just some screwy stuff with Nissan.

My iphone 4s is not being recognised with itunes 9 my computer only supports this itunes

My iphone 4s is not being recognised with i tunes 9, my computer will not update to 10 is there any way round this? or should it work?

The system requirements for the iOS of the 4S is:
Apple ID (required for some features)
Internet access
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download from www.itunes.com/download)

Oracle E-Business Suite account has not been linked with the Single Sign-On

We followed this note 1484024.1 to integrate Oracle EBS 12.1.3 with Oracle Access manager 11g R2.
Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11gR2 (11.1.2) using Oracle E-Business Suite Access Gate [ID 1484024.1]
All the steps have been complete successfully without any errors.
When the excisistign users trying to login.. they will get the single single OAM page but not able to use their current user id and passwords..
it says: "Your Oracle E-Business Suite account has not been linked with the Single Sign-On account that you just entered. Please enter your Oracle E-Business Suite information. The next time you sign on with your Single Sign-On account, it will automatically sign you on to the Oracle E-Business Suite using the following account information. "
Any help greatly appreciated.
Thanks!

Hi,
it says: "Your Oracle E-Business Suite account has not been linked with the Single Sign-On account that you just entered. Please enter your Oracle E-Business Suite information. The next time you sign on with your Single Sign-On account, it will automatically sign you on to the Oracle E-Business Suite using the following account information. "this is expected, if you are linking your existing OID users with existing EBS users.
When it asks the user information here, enter the EBS username and password.
The first time users login to ebs, it needs to link that particular usre with a particular.
The next time you login, it does auto link.
Please see "Applications SSO Auto Link User (APPS_SSO_AUTO_LINK_USER)" in
http://docs.oracle.com/cd/E18727_01/doc.121/e12843/T156458T465432.htm
Thanks

Oracle 11g jars not being compatible with WAS 6.1.x versions

Hi,
We have an issue with Oracle 11g jars not being compatible with WAS 6.1.x versions.
If we use Oracle10g client jars then they are working with the 11g database.
Below are the findings
Working fine With Ojdbc14.jar
Not working With Ojdbc5.jar
WAS 6.0
Working fine With Ojdbc14.jar
Not working With Ojdbc5.jar
WAS 6.013
Working fine With Ojdbc14.jar
Not working With Ojdbc5.jar
As per IBM website link Oracle 11g should be working with WAS 6.1.0.21 upwards
Could somebody please help me regarding the same.
thanks & Regards,
Anoop

# Download the full Firefox installer from http://www.mozilla.com/
# Delete the Firefox [http://kb.mozillazine.org/Installation_directory installation directory], making sure all the Firefox files and folders are removed. The default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
# Re-install Firefox
Note that deleting the Firefox installation directory will not remove your bookmarks or other Firefox user data, they are stored elsewhere.

I can not update the app, my account is not being accepted. Help!!

I need help updating iMovie, my account is not being accepted by the system.

This what finally worked for me
updating apps on 4s iPhone and iPad 3.
delete apps on both devices.
restart both devices.
then you should be able to use everything appropriately.
AT&T was having problems last week, I removed that app plus coupons, gas buddy and one other.
Actually I removed that would not update.
I still can not connect to safari.
The error message says it can not find the server.
Do you know how to fix this?
Thanks for help.

My yahoo email account is not accepting emails with picture attachments. The Internet provider says it is yahoo. Yahoo had nothing to offer. Do I have to adjust settings on the iPad?

My yahoo account is not accepting emails with picture attachments. Other wifi features are working. Other iPad and iPhone devises using this wireless router are accepting photo attachments. How do I have to configure my ipad2 to accept photo attachments on it?

This did not help, thanks for the suggestion but my settings match this description on both devices and no result.

Implementation of Note 80183 for Rounding: "QTY * Net Price = Net Value"

Dear All.
We're reviewing adding in note 80183 to handle some rounding issues.
Basically, our "QTY * Net Price = Net Value" is not adding up due to some rounding in determining the Net Price off the Net Value.
The note looks like the right answer, and there are already some very good threads posted on this topic.
What I'm hoping to find though is if someone has implemented the note, and what they found?
(1) Any issues encountered? Any impact to other functionality - Credit Checks, etc....
(2) Any additional changes needed to the alternative calculation type or alternative base value provided?
(3) Any additional requirements or customizations needed?
(4) Any issues with Account Assignment posting, or output (invoice or order confirmation)?
(5) General feedback on how easily implemented.
Many thanks!

HI,
The note: 1668972 - ME 083: Enter Net Price for value contract w. future dates has been modified in Jan 2014 and the correction instruction for even EHP 6 is included. Please check whether the correction instruction 1417190 already exists in your system. If not, apply the note.
If you are getting the same error even after applying the note, you may raise an OSS ticket to SAP.
Regards,
AKPT

Base Amount should not be more than PO net price

hi
Base Amount should not be more than PO net price , in MIGO if the Material is excisable excise tab will be populate i can able to change the base amount . i need the restriction Base Amount should not be more than PO net price , this requirement for purticarly for the dealar relegated tax codes . i am not maintain any conditions relegated BED ,ECESSand SECESS in the taxcode . i will eater the excise tab in MIGO or J1IEX Directly . please advise me how to restrict
@sakhi

if that is the case why are you proividing the Authorization for MIGO_GR transcation...........Restrict the MIGO transaction and try to give MB01 transaction .So that there will no discrepancy in PO to GR....

Images not being sent with forwarded emails

Hi,
When I forward an email sent to me that has attached images, those images are not being sent when I forward the email.
Yes, I am being asked to "Include" the attachments, and I click the Include button.
I see the images in my message to be forwarded just before I send it, but the recipient does not get the images.
Any assistance would be appreciated.
Thanks

Posts: 26
From: New England
Registered: Oct 15, 2005
Forwarding Mail fails to include pictures
Posted: Nov 26, 2009 7:54 PM
Reply Email
Recently I've had a problem with my iPhone 3Gs when I forward an email that contains graphics. The graphic is fine on my iPhone but when it arrives the picture is missing. I am selecting 'include graphics'.
I've re-booted - no change.
I've restored from a backup - no change.
I've restored without using the backup - no change (other than I lost a couple email accounts etc.)
Anybody got any other suggestions?
TIA
Tim
Intel iMac / MacBook Pro Mac OS X (10.6.2) 80 gig Classic iPod, 32 iPhone 3Gs
wmdilson
Posts: 3
Registered: Oct 9, 2009
Re: Forwarding Mail fails to include pictures
Posted: Feb 14, 2010 9:31 AM in response to: Timothy Adams
Reply Email
I have been having the same issue since late September and been in touch with Apple support since. First they said they had no other reports on it so it was my phone. I started checking and found many other with the same issue. I called back and finally in November I was told they were aware of the issue and was working on it. The first week of January I called again and was told the update first week of February was going to correct this. I did the new software update and guest what....IT STILL DOESN'T WORK!!! It is now February 14th and I am on the phone once again for the same issue that was known back in October 2009. I am paying $30 for data plan that I can not utilize 100%. My question after being patient for 5 months is who is going to refund me a portion of my data plan? Apple or AT&T?? This is a software problem that really needs addressed. Apple just releases an iPAD and can't correct this email issue??
iPHONE 3gs iPhone OS 3.1.3
ernie goldstein
Posts: 177
Registered: Feb 1, 2005
Re: Forwarding Mail fails to include pictures
Posted: Feb 22, 2010 5:33 AM in response to: wmdilson
Reply Email
foward email
Posted: Jan 29, 2010 10:14 PM
Reply Email
i have the 32 g 3gs iphone. i have no problem when i send pictures from iphone from my photo album. the problem i have is when i receive a email on my phone that has pictures not from someones photo album and i foward the email the people get the email but not the picture. all they get is ca blank square where the picture should be. i even fowarded to myself and the samething happens on my mac . I have called teck support & was told they are working on it. this is unacceptable. it should not take this long to fix this.
imac Mac OS X (10.6.1)

CcmEval Scheduled task not being created with "Access Denied" error 0x80070005 only on XP machines

Before coming on here I checked out http://social.technet.microsoft.com/Forums/en-US/ddbfe6c3-ee54-4b2a-a3a7-a6515d974f76/client-check-failed-on-xpserver-2003-systems-onlyccmeval-is-not-being-scheduled?forum=configmanagerdeployment (GPO
to allow scheduled tasks by users) and another thread about a hotfix that seems to be pre-XP SP3 and pre-CM 2012 R2.
That said, I'm having an issue many seem to have, but I can't find the answer. From what I understand SCCM uses the user context to create the CcmEval task, but in XP users cannot set a task to run as any other user (ie SYSTEM in this instance) so what is
the workaround? I can't just give users Administrator permissions to install the client.
The exact log entries are:
<![LOG[Client evaluation task doesn't exist.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:705">
<![LOG[Client evaluation task is not found or is disabled or is not compliant, perform remediation]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2"
thread="4356" file="ccmevalcheck.cpp:341">
<![LOG[Attempting to recreate client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356" file="ccmevalcheck.cpp:833">
<![LOG[Task scheduler 2.0 is not supported, peform task registration with 1.0 API.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356"
file="ccmevaltask.cpp:345">
<![LOG[Failed to delete task Configuration Manager Health Evaluation (0x80070002).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356"
file="ccmevaltask.cpp:379">
<![LOG[Failed to create task item (0x80070005).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="3" thread="4356" file="ccmevaltask.cpp:387">
<![LOG[Failed to create client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:850">
The bolded section is what's telling me it's Access Denied, and manual creation of any program task set to run as SYSTEM tells me the same- users cannot do this; only admins can.
What can I do?

So after sifting through some RSOP results and GPO objects I found a policy that wasn't necessarily prohibiting creation of them. (Not where you think it would be - under
Administrative Templates > Windows Components > Task Scheduler > "Prohibit New Task Creation" -
this was set to allow them) but this one I found was a File Permissions policy that set SYSTEM permissions to READ and EXECUTE.
I've changed this to FULL CONTROL for SYSTEM. I'm unable to get on the machines to examine everything closely, but from what I can see at least one of them has remediated themselves and now has a successful client check in the console. Hopefully the rest
of them will come around as GP updates itself and the client does an evaluation to remediate the Scheduled Task.
Hopefully this helps someone in the future as well.

XMP files not being created with DNGs...

I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
Thanks.
Russell

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

Calls not being recorded with AQM 8.5

We have installed AQM 8.5 with UCCX 8.5 and CCM 8.6 but the agent calls (voice & screenshots) are not being recorded on their desktops, AQM is sync with UCCX and have verified with manual sync and found no issue. Clint applications ( calabrio plug ins & desktop agent recording service) has been installed on the agent machine. The agent machine is daisy chained with a 7945 phone. On AQM server configurations done as per administration guide. Is there any service or application which needs to be started along with CAD for recording.

Actaully it was Java 7 where the page was greyed out, i downgraded it to version 6 update 20 but now when i click on validate pc i have error on page. This was happening with windows 7.
I installed jre ver 6 update 20 on windows XP, i was able to validate the pc settings successfully and login but now i have recording playing error, the screen shot is given for reference

HT1918 The credit on my account is not being used for purchases

I have redeemed two cards and am not being given the option of using the credit on my account from the cards purchased. I do not want to use a credit card at all. Why is Itunes so inefficient? How can I use the credit?

Use migration assistant.
See http://pondini.org/OSX/MigrateLion.html
Although this is only up to Mountain Lion it is still relevant to Mavericks.. only expect Mavericks to kick and buck a lot more.

GR/IR Account is not being credited with po net price

Similar Messages

Maybe you are looking for