GR output WEE1 and WE01 difference?

Hi,
What I need is 2 labels:
1 label with batch information (vendor and own batch)
and the other label with storage information (stor.loc and bin).
WEE1 and WE01
Is the only difference the sapscript layout?
Further question:
Can I decide during Migo how many labels are printed?
I read that this is possbile with a slip, but also with a label?
Are the steps:
1) activate the label on the material master
2) create 2 times output with the WEE1?
Thank you in advance,
Eric van Zundert.

[print labels in transaction MIGO;

Similar Messages

Difference between "output type" and "output medium" in interface

Can comebody kindly tell me the difference between "output type" and "output medium" with respect to interface?
Thanks,
Max

Hi,
Output medium means , how you wants to see the output like
Printout, Fax, Mail, or EDI output etc
Output type/Condition Type means for every Application document an Output type is create for the Output Message determination, this is linked with the Condition records, Medium, Program and the Output Script or smartform.
reward points if useful
regards,
ANJI

How to get exact date and time difference?

Hi,
When i am using the below sql statement:
SELECT (TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') - to_Date('7/27/2006 8:30:13 AM','MM/DD/YYYY HH:MI:SS AM')) * 24 hours FROM DUAL;
the output is:
Hours
8.50055555555556
But Actually it is 8.30
So how can i get exact days and time difference between two dates in Oracle?
Thanks....
Regards,
Suman Sakinala
Edited by: SSN on Sep 19, 2008 1:27 AM

Or more clearly (this time I have my date_from and date_to the right way around hehe!)
SQL> ed
Wrote file afiedt.buf
1 WITH t as (select TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') as dt_to,
2                    TO_DATE('7/27/2006 08:30:13 AM','MM/DD/YYYY HH:MI:SS AM') as dt_from FROM DUAL)
3      ,d as (select (dt_to-dt_from)*24 as diff_hrs from t)
4 -- end of dates
5 SELECT TRUNC(diff_hrs) as hours
6        ,TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60) as mins
7        ,TRUNC(((((diff_hrs) - TRUNC(diff_hrs))*60) - TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60))*60) as secs
8* FROM d
SQL> /
     HOURS       MINS       SECS
         8         30          2
SQL>

Frequency response and phase difference

Hi,
I generate "Sine-Swept" with a function generator, which is the input of my device.
Then, I measure the output(vibration) via a photodiod (which is as voltage).
Now, I want to obtain FRF and Phase difference between these two wave (output and input).
In most of the examples, the input and swept has been generated by the software itself, but if the input has been acquired externally and also the swept has been done via a function generator, how would be the FRF?
I have installed "Sound and vibration toolkit", Could you please give me a heads up, that how can I do that?
In advance, I really appreciate your help,
Petar

Hi,
I attached the project which I've recorded the data from DUTs. Also, I attached 2 snap-shots of the project, in case of the project file couldn't be launched.
I have connected the signal from a function generator to "ACH0" channel, and performed the swept-Freq in the output signal of function generator. (Red graph in 1st chart). Please note that the swept sine wave is generated via the function generator itself...NOT VI
The generated signal by the function generator is the input, which derives the oscillation of a drop,
A photodiode measures the oscillation of the drop via laser-scattering by drop vibration. SO....the signal generated by the photodiode is the "Response"....(white wave in 1st chart)(connected to "Ach1" channel.
Now, I want to obtain FRF, which the input is the signal generated by the function generator, and Response is the output of the photodiod'
As it's seen in the files...the FRF and phase difference is n't what is expected, also the coherence between in and output is zero!
Please help me out with this problem...
Thanks
Petar
Attachments:
12.seproj ‏419 KB
1.JPG ‏183 KB
2.JPG ‏177 KB

Output determination and Printer determination for both PO and GR

Dear all,
Can anyone please help me in congiguring the output determination and printer determination for both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
Thanks & Warm Regards
Somashekar Anand

hi Somashekar
follow he steps
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Change of Output type from WE01 to WE03

Hi,
I have assigned the GR with collective slip WE03,when I use Tcode MB90 i m not able to list all the material documents eventhough collective slip and print is active.I checked in MIGO transaction,output type was WE01.
How to change the ouput type of already posted GR's from WE01 to WE03.
Pls advise
Regards,
Shrini

MB02 select your mat document and click the message tab and maintian your out put type.
If you want always this output type MN21 maintain the output type.
NACE also assign your smartform to your output type.'
Pls check it this will resolve your problem

My IPad want charge I've bought a new charger and use difference outlets but it still want charge.

My IPad is getting hard to charge,I have to wiggly the charger to get it to charge. I've bought a new charger and used difference outlets. I need to know what is wrong?

Consider where you are wriggling the charger (I suspect you mean the cable. Why does everybody refer to a cable as "the charger"?) and make sure all the contacts there are free from pocket fluff and such.

Issue with Output designer and Konica bizhub Pro 920 Driver:

Hi, i would appreciate if someone could help me with the following issue:
I have designed a document using Adobe Output Designer and need to print it on Konica printer which uses above driver. Konica is not included in Adobe Presentment Target List so i am trying to use a Generic Postscript L2 - (PSLEVEL2) presentment target. I want to make few changes to this driver to match it with destination printer settings. e.g Output Order should be Face Up, Input and Output Tray should be Auto, Print position should be Left etc etc. I have tried to edit ICS file but it's not making any sense to me as i dont's know the PCL. Could anyone familiar with a similar situation help?
Thanks in advance
Tayyab.

Hi, i would appreciate if someone could help me with the following issue:
I have designed a document using Adobe Output Designer and need to print it on Konica printer which uses above driver. Konica is not included in Adobe Presentment Target List so i am trying to use a Generic Postscript L2 - (PSLEVEL2) presentment target. I want to make few changes to this driver to match it with destination printer settings. e.g Output Order should be Face Up, Input and Output Tray should be Auto, Print position should be Left etc etc. I have tried to edit ICS file but it's not making any sense to me as i dont's know the PCL. Could anyone familiar with a similar situation help?
Thanks in advance
Tayyab.

How to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)

Hi,
Can someone tell me how to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)?
Thank you very much.
Jack

John --
Windows is not an option for me. I like your idea of using a counter output -- it may be helpful as I am getting ramped up, but my application will eventually require both timer outputs.
I have a legacy C application written for Macintosh, and I am in the process of moving it onto OS X. So my options are to use DAQmx Base, or write an in-kernel driver. I actually have already done the latter for 6024/6025 E-series boards (for another company); for this client I was hoping to use the DAQmx Base to allow an easy transition to M-series boards, without the cost of writing and supporting a low-level driver.
The specific task I am doing is relatively straightforward. I record 2 channels of AI for a short period (usually about 250 ms.) and during this time I drive 2 external digital signals. Right now, I use the 2 timer outputs, which allows precise synchronization with the output and AI sampling.
I appreciate your comments, and thanks in advance for any additional suggestions you can lob my way.
--spg
Scott Gillespie
Applied Brain, Inc.
scott gillespie
applied brain, inc.

Getting Output filename and extension same as the incoming filename and extension

I need to create a SFTP send port where I should get the output file name and extension same as that of the incoming filename
I had set the filename in the send port as "%SourceFileName%" but this did not work.
I have also assigned the input filename (without extension) in a variable in orchestartion. Is there any way i could get the output filename and extension same as that of the incoming message?
Any help would be much appreciated

Hi,
The %SourceFileName% macro maps to the context property BTS.ReceiveFileName that travels with your message in the context. So in order for this macro to work in a send port the message that is going out needs to have this BTS.ReceiveFileName property on
the context. You probably creating a new message in your orchestration and sending that out. The new message does not have the property on its context which makes it fail. Use a message assignment shape in your orchestration to set the context property for
the message going out:
MyMessage(BTS.ReceiveFileName) = OrigMessage(BTS.ReceiveFileName);
Then %SourceFileName% macro will work at send port.
Rachit
Please mark as answer or vote as helpful if my reply does

Output determination and output type?

hi all,
wat is meant by output determination and output type?how and y we use it?
regards,
keerthi

Hi Keerthi,
Output determination is used in message control. You can read more about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
to configure it please use transaction: NACE
best,
Wojciech
<i>please reward points for helpfull answer</i>

Output Types and output determination procedure

Hi All,
What is the output type and output determination procedure for the following:
1) Credit Memo Request
2) Credit Memo
3) Debit Memo Request
4) Debit Memo
Regards
Ashis

Hi Ashis,
As per the standard
1) Credit Memo Request-
Procedure-V10000
Output type-BA00
2) Credit Memo
Procedure-V10000
Output type-RD00
3) Debit Memo Request
Procedure-V10000
Output type-RD00
4) Debit Memo
Procedure-V10000
Output type-BA00
I hope it will help you,
Regards,
Murali.

How to set output 1 and 2 and master in pro logic express when mixing

what is the recommended procedure for setting the levels of output 1 and 2 fader and the master fain pro logic express when mixing? I'm used to just one master fader with my Mackie board. Is there anything in the manual?

Already found the answer myself.
The entries have to be made in the sun-j2ee-ri.xml file.
cheers,
Markus Hammori

How to set "Output folder" and "Outputfolder URL" in Flasbuilder 4b1 for combined Java/Flex project with WTP?

Hi,
how can I set the "Output folder" and "Output folder URL" in Flasbuilder 4b1?
In Flexbuilder 3 I can do this under Project Properties/"Flex Build Path"
Under "Flex Build Path" in F4b1 I can see the settings, but they are not editable.
A message says "The output folder settings for server projects are on the Flex Server Property Page" but under "Flex Server" there is nothing (yet) I can change/set?!
Is there a workaround?
Thanks for any pointers!
Martin Zach

Yes I'm using Flash Builder b1, build 235740. But your settings panel looks different to mine (see attached).
Just a thought. When you created the Flex project, did you choose a server technology at that point already? I just remember from Flex Builder 3 that if you didn't choose a server technology when you created the Flex project then it was a pain in the ** to add it later. It involved editing the .flexProperties file manually if I remember correctly.

How to assign output type and trigger printing in ABAP

hi all,
i have create invoice by using BAPI_BILLINGDOC_CREATEMULTIPLE and create header/item text with CREATE_TEXT.
please advise how to assign the output type and trigger immediate printing after this.
thanks.

Hi Reetha ,
This is a functional setting , and should be done by some functional guy. The setting can be done by NACE.
Just follow the path : NACE - > Select V3 for Billing - > Press Output type Button Just above - > Assign Output Type and
then Assign Output program and form in PROCESSING ROUTINE comes into left. Set this output type for immediate print.
Whenever You create a billing document by BAPI with this document type , the print out will be fired immediately.
Hope it will solve your problem.
Thanks.

GR output WEE1 and WE01 difference?

Similar Messages

Maybe you are looking for