GR quantity for the planned order(MD13)??

Hi All,
         I have a list of planned orders(MD13) with planned quantities(PLAF table).
Now I need a Goods receipt quantity for these planned orders, because I need to show
the comparison between planned quantity and goods receipt quantity in the for the last month.
I can get material documents by passing material,plant,movement type and date range to MSEG,there I can find the GR quantity. But how can I know that this GR quantity is for that particular planned order ??
Say for example, I have planned 100units for the material m1 for the month of july.
But actual GR quantity for this material is only 80units. 100-80 = 20 units is my comparison..
From where can I get this 80units, hope u understand my question.
Anyone please help me.
Helpful answers will be rewarded
Thanks & Regards,
V.Raghavendra.

Hello Raghavendra,
there are no goods receipts for planned orders. These are converted either into production orders or purchase requisitions and then purchase orders. For production and purchase orders there are goods receipts.
For production orders you should find the link in MSEG-AUFNR (if you really do have any scenario with GR for planned orders, this should be the same field).
Easier, if production orders are applicable, should be to look in AFPO-WEMNG (Quantity of goods received for the order item) and compare it to AFPO-PSMNG or AFPO-PGMNG.
You can also check in AFPO-PLNUM whether this production order is linked to your planned order.
Regards,
Kay

Similar Messages

  • MRP setting for Purchase (Planned Order ) Requirement date

    Dear Sir,
    During the MRP run , we desire that the genertaed Planned Orders for the Purchase related items , should have requirement date as either the current date or the current date plus procurement lead time defined in the Material Master against the item .
    To achive the abobe requirement , we request you to pl guide us as what setting / parameters are required to be set in the MRP setup .  Or if there is some other alternate approach , pl suggest the same .
    With Thanks and Rgds
    Sonia Agarwal

    Dear
    Generally , during MRP run , system will genarted Planned order for Purcahsed item if it is opening period .
    The opening period for the planned order represents the number of workdays that are subtracted from the order start date in order to determine the order opening date. This period serves as a time float, which is available for the MRP controller when converting a planned order into a purchase requisition.
    You define the opening period for the planned order in Customizing for MRP in the IMG activity Define floats (scheduling margin key) and assign it to the material in the Scheduling margin key field (MRP 2 view) in the material master
    Now if you want to have Planned order for purchased item with requirement date as current date , then maintain Demand date like Sales Order requirement date as curent date in VA01 or PIR date as current date.
    Where as MRP will consider the Planned Order based on planned opening date , lead time , GR processing time from MRP2 view .So for current date requirement , u should keep Lead time and GR processing time as 0.
    Regards
    JH

  • Time scheduling by the Plan order (MD02)

    Hi,
    Does the the scheduling margin time be considered by (start and finish date) for plan order after MD02.
    If yes how can I customize the system
    Is the Time scheduling important for the plan order or only for the production order?
    I've set in the Material master for my Material 4 days by the scheduling margin.
    When I execute MD02. The system doesn't consider the 4 days by (start and finish date)  from the plan order.
    It only consider the Goods receipt processing time.
    Is the Goods receipt processing time relevant only for the plan order and the scheduling margin time for the production order?
    Thanks.

    Dear ,
    Did you miaintain the Scheuling Margin Key in OPPR , Material Master -MRP2 and routing ??
    Generally , to define the order float  we need the scheduling margin key in OPPQ .The scheduling margin key is copied from the material master -MRP2 view . The float before production or float after production and the release period are defined in the scheduling margin key
    For Customizing you need to go in OPPR or in   Shop Floor Control, by choosing Operations --> Scheduling --> Define Scheduling Margin Key . This key gets  transferred when the production order is created from planned order or direct production order  These values can be changed in the production ordr only .
    While running MRP , it will not cosider the SMK  for scheuling purpose  because MRP does not carry our detail scehduling based on Work Centre available capacity  where as it takes the routing operation time and perfomr the scheuling to gerenrate the Planned Order Dates .
    refer  this expert comments : Scheduling Dates for Planned Order and Production orders
    Regards,
    JH

  • How to populate the billing plan tab for the sales order inbound

    Hi Team,
    I am new to IDOCS, I have a requirement like IDOC extension of the sales order inbound.
    Can anyone explain in brief how can i add billing plan tab in  the IDOC extension for the Sales order inbound.
    Thanks, 
    Barathi

    U need to use the table vbfa or fololow thw link
    [http://www.erpgenie.com/sap-functional/sd/read-sales-document-flow-using-a-function-module]

  • Unable to confirm quantity on the sales order --- Product allocation issue

    The following configuration steps were completed in the APO system.
    1.     Maintain Product allocation object
    2.     Maintain Product allocation group
    3.     Maintain Product allocation procedure
    4.     Create planning object structure with the necessary characteristics
    5.     Maintain characteristic combination
    6.     Create Planning area with necessary key figures
    7.     Create Planning book and data view
    8.     Maintain connection to planning area
    9.     Generate Product allocation group objects
    10.     Generate characteristic combination from planning area
    11.     Allocate the stock for the CVC combination
    12.                 Assigned the product allocation group to the APO product
    Regardless of quantity in the planning book, it is confirming all the quantity on the ECC sales order. This is due to the material availability date being pushed out to 12/31/2011 which seems to be the last date of the planning area time series. The values on the planning book were maintained online (manual step).
    Also when I run the simulation of product allocation under GATP>Reporting>Product allocation,
    For the product allocation group and the combinations that I have, I get the message "No allocations defined for the current characteristic combination"
    Any help would be greatly appreciated.
    Thanks
    Ashwin

    Dear Ashwin,
    I would recommend to use the transaction /SAPAPO/ATPQ_CHKUSG. Enter the PAL group and do the following:
    First: run the transaction with the 3rd option. Select all assignments found by the report then press the button delete with incoming order qty -> this deletes all assignments without any order number                                                                               
    Second: run the transaction again with the 1st option. Select all entries. press the button "merge PAL assignments", press button execute, choose on the first popup "yes" and on the second popup "no"  -> this should correct the shortages.                                                                               
    Check the note 676128 to get further information about the //ATPQ_CHKUSG and the options.                                             
    I hope this helps.
    Regards,
    Tibor

  • Capacity Reservation Table for a planned order

    Dear experts,
    When I look at MD13, I can see the capacity requirement for a planned order.  I can also see the requirements build up in my CM01 screen.  We would like to pull the data into our BW system, but we are having issues finding where the capacity reservation information resides.  When I look at table KBEZ, I can only find values that correspond to production orders.  Is there a similar table for planned orders?  Does SAP save the detailed scheduling infromation for planned orders in a table somewhere, or is this calculated at the time MD13 or CM01 is run?
    Thanks,
    Matthew Bruckner

    Have you tried with KBED? I can see with SE16 that you have a field for selection with the planned order number....

  • Srap quantity should reduce planned order quantity

    Hi Gurus,
    I have a scenario here and i wanted to know if this can be technically achieved .
    1.We have IDOC flowing from legacy system and it consists of both good quantities produced and scrap quantities produced .
    2.Good quantity produced must be reported as a reporting point confirmation. Scrap quantity produced must be reported as reporting point scrap.  Scrap quantity produced must also reduce the planned order planned order quantity.
    3.Function module currently calls BAPI 'BAPI_REPMANCONF1_CREATE_MTS’ to post good Pieces Produced, can the same BAPI be used to call the scrap quantity and reduce the planned order ?
    I have tried 'BAPI_PLANNEDORDER_CHANGE’ to achieve this scenario but still the planned order quantity is not getting reduced.
    I want to know the feasibility to achieve this in technical or functional side .
    Kindly help me to solve this problem , rewards would be generous enough for people who solve my problem.
    Regards,
    PKP

    Hi Santosh,
    Yes, it's true, it would simplify a lot. Unfortunately it can't be done.
    These are high-end, high value and small life-cycle components and some packaging materials. Packaging materials are relatively easy to stock for one week or more but the other components should only be stocked to a minimum level.
    Moreover, suppliers of high-end components do not feel the need to respect scheduled delivery dates because they "own" the market, so we can't be sure when stock will be available. The high demand for this components also adds more uncertainty because there might be only (unplanned) partial deliveries during the week as of production is available and distributed for us and other supplier's vendors.
    Oh, and a production lot can really be of as low as 40 units in some cases.
    Well anyway, I've tried the ATP approach but immediately run into a problem. In the morning I might be assembling a component (A) for the afternoon and I have a delivery scheduled for the morning of another component (B). I can't plan the afternoon production of a product with both components. Even being 2-3 days, in some very frequent cases we should immediately start production as soon as components arrive.
    So ATP isn't very adequate even in the shortest time-frame to plan production in this scenario.
    Thanks a lot for your input Santosh, it was worth a shot. Right now I can't see an option other than copy SAP_PP_009 to a new heuristic that reduces planned orders to component availability or to use a very small maximum lot size for these short production runs.
    Regards,
    Edgar

  • Open the reservation for the Production order

    Hi,
    I have post the GI for Production order MB1A with movement type 261 from 100 peaces components. I would like to cancel a partial quantity of components from this posting (about 30 peaces). After cancel it the reservation for the production order has to be open for 30 peaces of components.
    I've canceled it through MB1A and mtype 262 but the reservations weren't open and in the PO (component overview there is always the sign"the Final Issue for This Reservation").
    Which T.code and mtype could I use.
    Thanks
    Dede

    Hi,
    Have you cancelled the movement (of 30 pieces) by selecting the "with reference" option from the menu?
    If not, then reverse the current cancellation document. Then again cancel the 261 movemtn by selecting the with refernce button from the menu. It will sove the problem.
    Check & revert.
    Regards,
    Rohit.

  • Confirmed quantity in the sales order coming as 3.5 ea

    Hi Gurus
    The confirmed quantity in the sales order coming as 3.5 ea where the order quantity was 10ea.I checked CUIN for EA the decimal places is given as 0 which is very much correct moreover I checked the material master in additional data I have not find anything abnormal.The order was created by a batch job.Please help.

    Hai,
    The system has concluded that 3.5 EA for the confirmed quantity means the remaining part of the stock are already allocated to some other sales orders.Out of 10 EA only 3.5 EA are  in the stock.
    You can view through the MD04 and then enter the plant ,material and then check the quantity that are allocated to the various orders.
    Please revert for any.
    Kalyan

  • Incorrect Sales order line item assignment to the Planned order

    Hi,
    I am creating a sales order & then MRP run to get planned orders.
    The sales order has one assembly line item, which is a configurable material. Inside the configuration of the assembly, I maintain some components. After saving it explodes and the same components reflect below line items of the assebly in sales order.
    Now if I run MRP there is a requirement for the component and so the planned order is created for the component. But If I open the planned order & see inside its Assignment view, there is correct sales order number, but the line item its showing is that of Assembly and not of the component. Why ? Is there any wrong in configuration or any wrong in planning type ?
    I checked correct Item category is used.
    MRP Type - PD
    Correct requirement type is used in procurement view.
    I think what ever is comming is standard SAP functionality. But I am not sure.
    The client is saying, thie is wrong and because of this the warehouse guy is picking the wrong material (As the line number is wrong).
    Please suggest here.

    Hi Sambit,
                  We assign the Ordet type(Production order/ Planned order/ Network) to the requirment class to let the system know that for the material which has this requirment class , system chould create a Planned/ Procustion order. When you assign this normally system should create it automatically based on the settings. Requirment class comes from the requirment type which comes from the Item category and MRP type(*Genarally). Also check if there is any startegy Group assigned to the material in the material master and also the MRP group. Check the strtegy group defualts in the transaction "OPPS"(rEQUIRMENT TYPE /class FOR CUstome requirments). The best thing you could do is make the screen shots of the assembly header and the component's requirment classes and tell the business that based on this sytem is creating the planned order.And also check the plant parameters and the MRP group parameters in "OPPQ" and "OPPR" respectively. Kindly please let me know if you need any more infromation on this.
    Regards,
    Ram Pedarla

  • Order type settings for  convert planned order to production order

    Dear sir,
    I have 1 company code ,under 2 virtual plants are there.My scenario is plant 1(main plant)and plant 2 (virtual plant)
    both plant same FERT material.in plant 2 i am creating sale order and atual production will be done in plant 1.
    FERT material plant 2(strategy-40 sp.procurement-40 setting in spro ref plant (plant1) )and  plant 1 material (strategy 82)
    run the MRP MD50.panned orders are created but iam not getting production orders directly not getting the production orders
    .i have done settings in spro OPPE order type is given.in MD04 manual conversion planned order to production order system asking order type ,but i given order type in OPPE
    What are the settings for  production order directly from sale order at the time of RUNNING MD50
    Regards,
    Naresh.

    Hi,
    You will not get a production order out of MD50. That would have to be set up in the SD customizing for the sales order item, but I am not sure that would work with your two-plant setup.
    After MD50 you need to run CO41 for the collective conversion (and I also recommend the mentioned production scheduling profile customizing and then maintain this profile in the material master work scheduling view)
    BR

  • Want last date of the month as default basic finish date for the Proc order

    For forward scheduling type in process order, irrespective of the start date i want last date of the month as my  basic finish date.
    Ex start date can be 01/10/2009 or 15/10/2009, but the basic finish date should be 31/10/2009.

    Hi Sam,
    sorry to say , its not possible in standard SAP.
    1) If, on order creation, a planned order exists for the production order/ process order, the basic dates are copied from the planned order.
    2)If no planned order exists on order creation, you must specify at least one basic date.
    The scheduling type determines the basic dates that you must specify. and it useses timings from routings for scheduling.
    so may be you need some work around.
    explain your requirement why do you want to fix it for the last day of month and other constraints, may be we can find some way.
    Regards
    Ritesh

  • Default PR type for MRP (planned order -- PR)

    Hi Expert,
    Is there any posibility to set default PR type for planned order - PR conversion from MRP?
    in SAP standard, PR type is NB, we have configured specific PR type, let say PRM. The purpose is we do not need to change NB to PRM while converting the planned order into PR.
    Pls help.Thanks
    Rgds,

    Hi Gurus,
    This is my first post in this forum. Have been trying to search this forum for my case all day and found some answers but when i implemented it in my SAP , the answers didn't work.
    The case is:
    When i try to convert Planned Order to PR through tcode MD15/MD16, the system will propose PR Document Type NB as default. In my company we don't use that NB PR type. We have another 10 customized PR Type and one of them is for Replenishment. I'd like to set this ZR09(Replenishment) PR Type as default and it's not possible to choose another PR Type.
    I have read several answers and implemented them, for example:
    1. OPPR with MRP Group 000, and I found no indicator except Scheduling/Doc Type. I typed ZR09 in field Doc Type SPO but in MD15/MD16 other PR Types still appear with NB as default.
    2.  SPRO-MM- Consumption based planning u2013Procurement Proposal u2013 Define Order Profile or SPRO-PRoduction - MRP- Procurement Proposal - Planned Order - Define order Profile, when creating new entries with Object Type Planned Order/PR still canu2019t find my customize PR Type in field Order Type. Field Order Type only consist of 2 digits order type such as NB,LA,RS,KD,KB,PE,PR,VP. No place to choose PR Type ZR09 or other customized PR Type.
    Can anyone help my case?
    Thanks and regards,
    IC BUMA

  • MRP not rescheduling the planned order by itself

    Hi,
    After MRP i could see that the planned order is not present as per the date of the requriement whereas the planned order at a future date is given a Exception message 30 : Plan accordingly to schedule and proposed the date of the requirement. The requirement is beyound the replenishement lead time and hence MRP should reschedule by itself the planned order as per the date of the requirement rather than giving a exception message as above for a future dated planned order.
    I am not sure what is it i am missing. Could you explain.
    Thank you

    Dear ,
    MRP will re schedule the planned order based couple of inputs and checks during MRP run .Basically , it depends on following
    In MRP exectuion you should  keep : Procesisng Indicator : NETPL: The system only plans materials that have undergone a change that is relevant to the planning run within the period which you defined as the planning horizon. The system sets the net change planning horizon indicator automatically for these materials 
    Planning Mode : 3-Delete and Re-create Planning
    It also depend on following set up  and you need to analysie that :
    1.Planning Time Fence : based on the PTF , there will not be any automatic changes relevent for MRP
    2.MRP Type : PD , it will adoped normal planning and it will not re-schedule order proposal automatically  .In you case  can use P1-Automatic Firming and Re-schedule Out Of Order Proposal based planning time Fence
    3.Keep your Planning Horzon more than the Highest Material Lead Time in Material Master MRP2 View
    Please check and revert
    Regards
    JH

  • What is a Statastical Good Receipt for the Purchase Order?

    Hi,
    What is a Statastical Good Receipt for the Purchase Order?
    What are the effects of the same in the documents like the po,stock (quantity and value), invoice verification etc?
    Thanks
    Regards

    Hi,
    In general the Statical GR done for Thirdparty Purchase Order.
    As no stocks updated at plant, its only record purpose.
    If you don't  done this GR , also you can able to do MIRO.
    The MIRO passed without any error.
    Regards

Maybe you are looking for