GR reversal error message E M7 037

Hi experts
we were trying to cancel GR on 30-11-2007.
we got the following error message.
po no: 0023060608 po item 00010 E M7 037 in plant PN54, post to current period 2007/12.
please help me.
Thanks & Regards,
Ramesh

hi Ramesh,
looks like the problem is around MM periods. Pls. check which ones are open!
ec

Similar Messages

CO88:Error message KD 285-GR reversed 5 months after settlement

Hi Friends,
We have a production order on which GR is reversed after 5 months of final settlement was done. The order status is now changed from 'Closed' to 'Released'. The Order has now costs posted to it which should be posted as WIP as the goods receipt earlier done has been now reversed. The system does calculate WIP but at the time of settlement gives the error message KD 285-Status DLV/TECO was reversed after settlement of period 003 2009. This error message recommends revesring the past settlement. When you try to reverse settlement, it is not possible due to error message CK122 (as the MM period for the past settlement is closed and this period is 5 months earlier than the current period.) Is there any way to be able to reverse settlement in the past periods (not immediately previous period)? If not, is there any workaround to fix this issue? If the status is set to TECO again, the system may post all costs posted to the order as variance instead of WIP so that does not seem to be solution. The GR is not going to be posted in current month again so for one month correct result, is there any way which can be used?
Thanks and regards,
Pinky

Hi Pinky,
I think You have done a simple mistake,
Before Reversing the Order, i think u did not revers Settlement...RIGHT...?
U should have reversed the settlement, and reversed GR...
Now the solution is, Post the Reversed GR again , first check in current period, IF not I think u have to change the period to 003,
Reverse the settlement in the last period 003, Again reverse The GR.
Now it will be ready for WIP calculation.
Check it in SANDBOX.
Correct me if i m Wrong..
Regards,
PAVANIDLUR,
SAP PP

FTR_TRD 022 Error message when I try to settle SWAP transaction which was reversed previously

Hello Gurus!
I've got a problem with settlement of SWAP transaction.
The situation:
1) I created Cross-curr.interest Swap transaction. Product type is the copy of "62B Cross-curr.int.rate swap (CCS) SWAP"
2) Made 'Settle' for it.
3) Made 'Reverse' for it.
4) After that I try to re 'Settle' transaction. Error message appears for the flow 1125
Unable to determine the TRD business transaction for flow 1125 31.08.2014 + 35.000,00
Message no. FTR_TRD022
The same message error appears on 'Change' of this transaction.
I don't have such problems with other OTC transactions.
What should I do with it. I thought that it is SAP program error but I didn't find any suitable Notes.

Hello Jyoti,
thank you for reply!
I've got processing category for my transaction category = '00002 With Settlement'.
So then I reverse the transaction activity is changed from '2 Contract Settlement' to '1 Contract'
What do you mean 'setting for activity reverse to settle. Generally we define activty 10 to 20' ??
Where can I customize ??

REVERSE GOODS ISSUE ENCOUNTERED ERROR MESSAGE

Dear Experts,
     When do the      reverse post goods issue VL09 the movement type is 601 encountered a error message-'
"HU ITEMS's   MATERIAL POSTING IS INCONSISTENT " after configuration changed for HU no. from non-unique to unique.
     Could u anyone please advise me solve this issue?
     Thanks in advance
with regards
s.anbu

Hi
Implement the program correction in function module HU_CONSISTENZ_CHECK
Do check support package and release
Please refer
Note 702800 - Error with reversal, HU inconsistent
Regards
Jitesh

Error message displays backend server name : Reverse Proxy

Hi Experts,
We are using Apache 2.2.16 for reverse proxy.Below is the scenario.
browser -
>Apache server -
>SAP Web Dispatcher -
>SAP SRM Portal---->SAP SRM ( backend )
Now https://apache_server_host:443/irj works fine. but whenever we select one iview , there is dump in backend system & error message at portal displays backend server.
e.g
Error application is coming up.
20101012
BASIS
074335
srmhost
http://srmhost.xyz.com8000/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
RAISE_EXCEPTION
Exception condition "PURCHORG_NOT_FOUND" raised.
Now can we hide , srmhost ( backend ) or can we replace srmhost with Apache host name.
I am trying mod_substitute but it is not doing anything .
Best Regards,
Tushar.

Solved by
AddOutputFilterByType SUBSTITUTE text/html
Substitute "s|http://srmhost:8000|https://apache_host|ni"

Error message "iTunes has detected an iPod that appears to be corrupted"

Everything used to work just fine until recently. On my Windows XP Home SP3 laptop, with iTunes (version 9.0.2.25) already open, I connect my 5th Generation iPod Nano and get the following message in iTunes:
"iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
If I plug the iPod into the computer without first starting iTunes, the Windows ‘Auto Play’ message comes up immediately then disappears and then the following message appears:
"Your iPod needs to be formatted for use with Windows. Would you like to run iTunes to restore your iPod Now?"
Otherwise, the iPod functions normally when not connected in iTunes. I can play the music, videos, and record videos with no problems.
The troubleshooting steps I took were:
I performed a reset of the Nano by first sliding the hold switch on/off a few cycles, leaving switch off (no orange showing), then pressed and held the Menu + Select button until the Apple logo appeared. Then I tried it in iTunes again; no such luck, same error. I then did a reset again, this time with the iPod connected to an AC power source; still no luck. I tried the reset numerous times and it didn’t help.
Next, I ran the diagnostics by pressing and holding the Menu + Select buttons immediately followed by the Select + Reverse buttons. I stepped through all the diagnostics tests and all tests passed as far as I could tell (there was no errors reported).
After this, I tried it in iTunes again and still no luck.
I even tried the iPod on my Windows Vista Home Premium (32 bit) machine and it behaved the same way. The version of iTunes on that machine was at an earlier version when I first tried it there. I then upgraded iTunes to the latest version but that didn’t help either.
I can sync my iPod Touch and 2nd gen Nano without any problems.
Sorry about be long winded about this but I am wondering if anyone else may have other suggestions. I want to try and avoid a restore if possible because I have some videos I recorded that I would like to get off the iPod. I’m not concerned about my music files as I have them always backed up but didn’t get the videos off yet.

I am having this same problem with my brand new Mac Pro. It seems to be tied to the computer awaking from sleep (no I am not leaving the iPod connected while sleep... I am referring to waking the computer from sleep and then connecting iPod as opposed to restarting the computer and then connecting the iPod). In other words, if you are getting this error message, try ejecting the iPod, restart your computer, then connect the iPod and see if the error message goes away. For me it does, but I only get one shot at it, if I eject the iPod and then reconnect it, the error message returns. This happens on both iPods I have. I have rebooted (hold menu-select) and gone to disc mode (hold select-play) and the error message remains. The only way it goes away is to reboot the computer, then I get one shot at hooking up an iPod.
I NEVER had nor get this error message when I connect to the Windows PC that I started with. Perhaps the iPod does not like moving from PC to Mac?

Disk utility error message

My daughter told me her Mac mini isn't booting up past the grey screen. I put in the install disk and started it up pressing "C" and used Disk Utility to attempt to figure out what's up. I got the following error message:
Could not repair due to underlying task failure on exit (-9972)
Does this mean the hard drive is toast? I don't have any HD repair software-with all my Macs I've never run across a problem that the boards here or Disk Utility couldn't fix for me. I don't know if she damaged the drive (she claims the cat chewed on the edge of the mini-sounds a bit like the "dog ate the homework"), or if it failed. It was purchased last year when Tiger was released, so it should still be under warranty. Any ideas about what I could try next?
Thanks
~margaret
17 iMac G4 1.25GHz 160GIG HD Mac OS X (10.4.3) G4 iBook, Mac mini, 10G iPod, iPod mini (pink!), Apple IIGS

Dale, although the -9972 error is probably some serious data error on the drive, which can sometimes be solved by an Erase & Install of Mac OS X, the fact that the Hardware Test reports an issue probably means that the data error was caused by physical damage on the drive.
I have to say that I find your post(s) most unhelpful. It' true that the informatin contained in them can be useful, however, you could have made the effort to sort it for iMargB. The fact that you didn't, plus your posting of the exact same post in two different threads, makes me feel that you are in a hurry, and that you sacrifice quality to quantity. Trying to help as many people as possible is a good thing, however, we are here to help (or to be helped), not to overwhelm people with information, hoping that they will figure it all out on their own.
iMargB, the Hardware Test is not part of Mac OS X, it is a system-specific volume, which explains why it is included on your original disc rather than on the Tiger one. Your guess of using the latest OS's Install disc was a good one though, when it comes to using Disk Utility for example : attempting to repair a Tiger installation with a Panther disc is not a good idea, as it might damage it instead, because of the differences between Panther and Tiger.
Although I know little about the Hardware Test's error messages, the "Master" part is not what would worry me, as it could just be the position of your hard drive's jumper (which could be Master, Slave, or Cable Select). However, if the Mass Storage test is failing, I would suspect a hardware issue with the drive itself. Hardware Test is known to miss a few things sometimes, but the reverse isn't true. Thus if it reports a bad drive, I think it is safer to assume that there is an issue than to assume that Hardware Test is wrong. Moreover, the "Invalid Node Structure" is very likely due to physical damage (as I already said), therefore, zeroing out all data and reisntalling Mac OS X or using Disk Warrior could be very temporary fixes.
If you have a FireWire cable, I would suggest booting your Mini in FireWire Target Disk Mode to retrieve as much data as you can, with another Mac such as your iMac or iBook. Instructions can be found here. There may still be a chance that the other Mac could see the drive, so not all your data would be lost. Then, I would take it to Apple for repair, as the drive could be failing.

Error message severity not translated correct when locale is changed

We have a shell page displaying different task flows within a dynamic region. The shell page f:view tag has locale="#{LocaleManager.currentLocale}" to allow programmatic change of locale. Most of the flows uses the locale from the browser request (e.g. Danish) but some pages has fixed locale (en_US) and will always be rendered with this locale (don't ask me why. It's a requirement). For those fixed locale pages, the expression #{LocaleManager.currentLocale} always returns "en_US". It works nice, but we have a strange problem with the translation of error messages displayed by validators/converters. E.g. if a character is entered in a number field, the user will see the usual popup error message like "*Error:* The value is not a number". The message part of the error message is translated but the severity message prefix ("Error:" in the example), seems to be translated and cached once per session. If the error message popup has been displayed once in a different locale, then after change of locale, the severity message prefix continues to use the translation from the first display. The message part of the message is translated perfectly.
Let me give an example:
1) User enters da_DK page and enters a invalid number. Error message displayed: "*Fejl:* Værdien er ikke et tal"
2) User enters en_US page and enters a invalid number. Error message displayed: "*Fejl:* The value is not a number"
If the examples is reversed, then the error messages will be:
2) "*Error:* The value is not a number"
1) "*Error:* Værdien er ikke et tal"
Do anyone know how to clear this translated severity message prefix, when locale is changed? Or is there a better way to overcome this issue?
We're using JDeveloper and ADF 11.1.2.2 and are able to reproduce the issue on the embedded weblogic.

Hi again
ok I added another locale that ships with flash builder, and encoutered the same problem
whenever I change the locale, the error tooltips are gone
I was even able to fix both new locales by assigning the the validators custom error messages using resourceManager.getString() like i assign a value to all other UI strings in the application
the default locale which is specified in the project compiler's parameters is en_US
and my final question to you is:
is there a best practice regarding localizing & managing the error massages Flex SDK uses?
what is the internal path to the resource bundles that flex uses to display errors?
it seems like it makes more sense to copy and edit an existing list of errors, rather then blow up the application code...
can you please share your view on the matter
thank you for your help
Yariv

HT1473 Had to "repair" Itunes today after error messages would not let me open. I can no longer sync my phone to computer without deleting all of the contect on my phone. I don't want to do that! I am trying to get the music from my Iphone to my Itunes li

Little background:
Went to open Itunes, error message told me I was missing files and I was unable to open. I deleted Itunes and re-downloaded and received same message. I then "repaired" Itunes from my "unistall/change" program menu. The error message then changed to being "unable to read my library of music." So I fixed that by following some other forum directions (Went to My Computer/Music/Itunes then dragged the most recent Itunes Library selection to my desktop, then opened the folder under music titled "Previous Itunes library" and moved that file into that folder. Thankfully that worked... sort of... I have some music in my library. None of the music from my super old Limewire library, or any recent music from my phone. All of which was in my library last night. Not to mention the HOURS of cd's I burned to Itunes over the entire weekend. Hundreds (at least) of songs are missing.
So I attempted to sync my phone and was told it would delete all of the files in my phone to replace with files from my computer. Which is NOT what I want to happen. Trying to get music FROM my phone to my computer.
Can someone please help me simply sync my phone to my computer? And then somehow get the music from my Limewire library to my Itunes library? I know I may not get the burned music back... But that sure would be amazing.
I am at a loss. Apple won't help unless I pay them... So hopefully this looks familiar to someone!
Thanks,
Katie

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Constant Error Messages with Purchasing & Downloading on iTunes with iOS 7

This is getting ridiculous. Ever since I downloaded iOS 7 when it first came out, I've had difficulties making purchases and downloading content wirelessly using iTunes on my iPhone 4S and iPad 2. Every time I tap "Buy" I get a message that says the "Content Cannot Be Purchased At This Time." I then have to close iTunes completely (double-tapping the HOME button and swiping up on the iTunes window), then re-launch iTunes, find the content again and re-hit Buy and then I finally get the button to Download Now and Download Later. Choosing Download Now, I get another error message saying "Content Cannot Be Downloaded At This Time," and I have to do the whole shut down/re-start process all over again to finally have the download start. This happens when I attempt purchases using 3G and on wifi (and I've tried several different wifi networks and I get this error all the time).
I never used ot have problems like this on my 4S or iPad 2 before iOS 7. I tried restoring to factory settings and then moving all the content manually back from the iCloud and my computer and I still get the error. I tried signing out of my AppleID and logging back in, still get the error. I downloaded the latest iOS 7 software (currently running 7.0.4) and I STILL GET THE BLOODY ERROR. Calling AppleCare, they have no freaking clue why I'm getting this error and neither do the Genius Bar people.
There doesn't seem to be anybody else (that I can find online) who has the same problem. But there also doesn't seem to be anybody at Apple looking in to this which is incredibly frusturating. I've been submitting Bug Reports to the Apple Feedback pages for over a year now and still no acknowledgment from Apple. I also have been having the issue where my iPhone/iPad iCal apps keep reversing my Alert preferences (which I've noticed people complaining about for over 3 years with no solution from Apple).
This is getting out of hand. I've been a loyal Apple customer for the better part of a decade. I switched to Apple over PC because of their committment to excellence and relatively lack of bugs in their software. But lately, Apple's quality has suffered tremendously. When there are iOS software glitches that continue after 3 major updates (and several minor ones), clearly Apple engineers don't give a crap about their customers or the user experience. If these issues aren't addressed, I'm seriously going to take my business elsewhere. There is simply no excuse.

You won't see Viber data in www.icloud.com. App data (e.g. Viber) is included in an iCloud backup or iTunes backup which includes other information. Kindly see this support article for more information - http://support.apple.com/kb/HT1766, https://support.apple.com/kb/ht4946 and http://support.apple.com/kb/PH12519.

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How to trigger error message

We are using the following sceanrio:
R/3 Idoc > IDoc Adapter > XI > JDBC Adapter > SQL databse
and reverse.
we want to trigger some error messages enroute.
But we are not able to finalize the points where we can anticipate for errors, how to catch thema dn report.
Is there any documentation out there that can help us to proceed with our sceanrio?
Thanks,
Bhaskar

closing - no answer

Error Message during posting return delivery against materil document

Dear experts
I have created a purchase order with batch specific unit of measure KAI.
I created the inbound delivery document (say for eg: 30,000 KG)
I have taken GRN for the above IBD through MIGO transaction with 101 movement for all 30,000 KG.
Later i have posted the return delivery 122 movement with reference to above 101 material document. 30,000 KG
After this i realized that i need cancel the 101 movement document.
So cancelled the 122 movement document, and try to cancell the 101 material document.
Then system is issuing error message VLA 321 "Movement type 102 cannot be used here".
Also if i again want to post return delivery to send the stock back, then also i have error message. but this time it is VLA 319
"Return delivery qty greater than previously GR-posted qty:"
My Support package for SAP_APPL, relese 600 is SAPKH60019.
Please suggest me solution to fix these errors as these are not relavant for the situation.
Regards/Murali

Hi,
Can you please check this note...
Note 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
Note 1342935 - Error message BORGR 623 during GR reversal in MIGO
Regards
Bhuban

Error Message for the cancellation of paid billing document

Hi,
Can i create and error message for the cancellation of paid billing document? If yes, how can i create such.
Overview:
Accounting document is created upon creation of billing document. Upon payment, document cleared is the accounting document created. There are instances wherein accounting document was already cleared but our user is still able to reversed billing document. Now, i want to create an error message or user exist wherein, when a user will not be able to reverse the billing document if the accounting document attached to this billing document is already paid.
Thank you and best regards.
Rachelle

Hi Rachel,
You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
For this accouting document, Pass this to BSAD Table ( Customer clleared items)
If BSEG-BELNR = BSAD-BELNR and
BSEG-Acc.Year = BSAD-Acc,year )..
Then throw a error message and EXIT.
So for all the cleared docments , user can not cancel the invoices.
Regards,
Sai

GR reversal error message E M7 037

Similar Messages

Maybe you are looking for