Grade Batch File Uploads
The University of Utah uses peoplesoft as its grade management system. As presently implemented at UU faculty must enter the grade individually (via radio buttons) for each student. Is it possible to enter grades into peoplesoft via batch files that have student names, id's, and an associated grade?
Hi Dhiravia,
If you want to convert the month format, please refer to the batch script below:
SET Month=%DATE:~4,2%
if %Month%==01 set Month=JAN
if %Month%==02 set Month=FEB
if %Month%==03 set Month=MAR
if %Month%==04 set Month=APR
if %Month%==05 set Month=MAY
if %Month%==06 set Month=JUN
if %Month%==07 set Month=JUL
if %Month%==08 set Month=AUG
if %Month%==09 set Month=SEP
if %Month%==10 set Month=OCT
if %Month%==11 set Month=NOV
if %Month%==12 set Month=DEC
echo %Month%
To convert the date format via cmd, please also check this article:
http://myblog4fun.com/archive/2012/01/06/getting-the-current-date-and-time-from-bat-files.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
Credit card file upload(Tcode: PRCC) in a batch process
Hi all,
Is it possible to make credit card file upload(Tcode: PRCC) in a batch process.
when i tried doing so got message "frontend function cannot be created in batch mode" .
I am aware that it is because this program is using "GUI_UPLOAD" function module which is for front end only and not for background processing.
But as this is standard program I cannot change method of uploading flat file.
Please suggest me any method to solve my requirement. I need to make credit card file upload in a batch process.
Thanks ,
SnehalCheck mark parameter 'File is not local' for SAP to read file from application server (file is read using open dataset instead of gui_upload). This would allow you to run this tcode in background.
-
File Upload / Download - Advice Required
Hi all,
This is really just a general question, looking for advice.
I have downloaded and successfully used the File Upload PJC for Forms 6i - thanks Oracle.
We are looking to use this to download and upload files from or to the client machine, and I am (relatively) confident of reversing the Java components to allow this to happen.
However, we are actually looking to transfer the files from the client machine, to the 9iAS Tier and then to the UNIX (AIX) tier where the database (8.1.7.4) resides - and vice versa.
I have considered a couple of different approaches :
1. Run the Java Server component in the Database JVM to enable the writing/reading of files on the UNIX filesystem.
2. Use TEXT_IO on the 9iAS tier, and UTL_FILE on the Database Tier, to move files between the two tiers.
3. Write the files to / from the Database, and then from/to there into the UNIX filesystem.
Does anyone have any expereince of attempting to implement a similar solution, or information on Oracle documentation explaining any of the above.
Plus, I'm sure I must be missing a trick !
Any other ideas ??
Regards
Marc LudwigWe have build a similar solution,
for the download:
we use the pl/sql gateway to send the file to the client with the following function:
wpg_docload.download_File(lob_loc);
you could build a pl/sql procedure that accepts an id and selects the blob locater and
triggers this function. the procedure can be called by setting the configuration in your DAD correctly.
that way its easier then rebuilding the whole fileupload utility.
in the webforms you can have a code that opens a new window with an url you give.
the url will point to the pl/sql function and you can pass the id of the record you want to get the blob from.
for the upload to your database:
well, we chose to loose the zip functionality and modify the pl/sql library that comes with it.
instead of using the uploadserver class, you could build a pl/sql function in the database that
accepts the varchar32 strings (which are base64encoded chunks of your file) and appends them to a blob.
the function that could do that would look like:
PROCEDURE APPEND_DATA(P_ID IN NUMBER, P_DATA IN VARCHAR2) IS
bin_data blob;
append_data blob;
raw_data raw(16384);
BEGIN
dbms_lob.CREATETEMPORARY(append_data,true);
dbms_lob.OPEN(append_data,DBMS_LOB.LOB_READWRITE);
select binary_data into bin_data from ibs_physical_doc where id=P_ID for update;
raw_data:= utl_encode.BASE64_DECODE(utl_raw.CAST_TO_RAW(p_data));
dbms_lob.write(append_data, utl_raw.LENGTH(raw_data),1,raw_data);
dbms_lob.APPEND(bin_data,append_data);
dbms_lob.CLOSE(append_data);
COMMIT;
END;
you can increase the chunksize a bit more.
you still have a problem btw that you probably cant upload more then 4-8 mb before you get an out of memory error on the client.
you could solve that by rewriting the client java file to send the file piece by piece on request by the server instead of all the pieces after eachother, and first read a piece of the file and then encode that piece and then send it instead of reading the whole file, encoding it and sending the chunks.
Another option is to use the standard upload possibilties with web pl/sql, and open a new browser window to that window from forms. A drawback of that is that it is not integrated in the web forms program and that you cant see when the upload is finished (no callback). and that you are bound to the default table layout.
one final thing, if you are going to use this, you might want to take a look at using JInitiator 1.3.1.9 if you arent using it already this automaticly sets the signature in the clients database if he accepts it. there is a bug in it, look for it somewhere in this forum. if you are using the sample that comes with forms 6i you will have to replace the fileuploadprogressbar with the one that comes with the forms 9i sample and recompile everything and i think you will have to use JDK1.3.1_03 for that. that means that you will have to modify the make batch file. the command for compiling is different, the classpath is an option when you call javac, also you will have to sign it with jarsigner.exe (in the jdk) instead of the one in the example.
Hope this info is helpfull, if you like to have more specific code, mail me at [email protected] -
Running a batch file - VERY URGENT .. help
Hi people
I am attempting to run a batch file from with a JSP page.
the code i am using is:
Runtime runtime = Runtime.getRuntime();
Process process = runtime.exec("cmd.exe /c d:\\uploadfiles.bat");
This jsp file is located on the c: of a webserver.
the uploadfiles.bat is located on the d: of the webserver and the code is:
copy d:\videos\008214?.rm d:\blah
copy d:\images\008214.* d:\blah
copy d:\xml\008214.* d:\blah
cd \blah
pkzip -es -m 008214.zip *.*
copy 008214.zip d:\upload\008214.zip
del 008214.zip
If I run this batch file from a command line, it works fine, though when I try and call it through my JSP page, it doesnt do anything .. a command window just pops up for a while, and then closes.
How can I fix this ... I need this quite quickly
Thanks people1) It is O.K. that you see nothing in that console. Its output is captured by Java and is not displayed on the screen.
In general, that console should not be visible, but actually it behaves differently according to JDK and OS versions (treat that as a feature).
2). Look at this article:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
It it does not answer your problem, try to search the forums:
http://search.java.sun.com/search/java/index.jsp?qp=%2Bforum%3A31&nh=10&qt=%2B%22exec%22+-%22Replies%3A+0%22&col=javaforums
Questions about Runtime.exec() has been asked hundreds of times.
3) runtime.exec() can execute BAT files. It is not necessary to specify that "cmd /C". -
How to install and set printer paper and tray automatically via script or batch file
Hi,
Our firm using HP Printers and we need to deploy printer in Citrix Environment where setting does not save to the Base PC Image.
Because our Environment is Citrix (User Settings and Printer are deployed when user login).
Can we build the setting into the Base PC Image for All users?
Printer get install when using login.
Problem that I am encounter right now are:
1. How to correctly identify all tray from each printer.
2. How to set all paper tray to A4
I am currently using Powershell Script to install printers during login, all the printer driver has been installed to the Base PC Image.
But the trouble I have is when the script run to completion.
It only added the printer.
I've been googling, but I can't find a way to detect printer tray or how to set all the tray to A4.
I don't mind using any type of script/batch file or even program.
Any of the following language is C#, VB.NET, powershell, vbscript or Event Access to HP API ?
Our Environment:
Windows 7 x32 SP1
Windows Server 2008 R2 (Print Server)
I am using the PCL 6 Printer Driver.
Our Printers are:
HP LJ CP1025NW
HP C LJ 4650
HP C LJ 3525
HP LJ 1045
HP LJ 2050
HP LJ 3055
HP LJ 4015
HP LJ 4350
HP LJ 4700
HP LJ 2035n
Thanks in advance
Regards Dat.Most of those printers are commercial grade printers. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Running a batch file kept on the server
Hi ,
I need to upload a file onto the application server then i have to call a batch file from my ABAP code kept on the same server .
The batch file takes 3 inputs the uploaded filename onto the server the new file name ( that can be any name ) and the delete flag parameter ( 0 or 1 ).
Is there any function module to do the same ??Hi,
Follow the steps:
1) Define external operating system command say zcopytm1 using SM69 by using the following parameters:
Command name Operating system Type
ZCOPYTM1 Windows NT Customer
Operating system command
e:\tm1out\tm1ph.bat
Parameters for operating system command
Leave this blank
tm1ph.bat is the batch file which it will execute.
2) First test it using SM49. Once satisfied use the following code to execute it thru ABAP:
DATA: BEGIN OF t_copy OCCURS 1.
INCLUDE STRUCTURE btcxpm.
DATA: END OF t_copy.
DATA: statusline LIKE btcxp3-exitstat.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = 'zcopytm1'
status = statusline
TABLES
exec_protocol = t_copy
EXCEPTIONS
no_permission = 1
command_not_found = 2
parameters_too_long = 3
security_risk = 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry = 13
jobcount_generation_error = 14
OTHERS = 15
CASE sy-subrc.
WHEN 0.
MESSAGE s999 WITH 'File has been copied in G:\public\tm1ph'.
WHEN 1.
MESSAGE s999 WITH 'No_permission'.
WHEN 2.
MESSAGE s999 WITH 'Command_not_found'.
WHEN 3.
MESSAGE s999 WITH 'Parameters_too_long'.
WHEN 4.
MESSAGE s999 WITH 'Security_risk'.
WHEN 5.
MESSAGE s999 WITH 'Wrong_check_call_interface'.
WHEN 6.
MESSAGE s999 WITH 'Program_start_error'.
WHEN 7.
MESSAGE s999 WITH 'Program_termination_error'.
WHEN 8.
MESSAGE s999 WITH 'X_error'.
WHEN 9.
MESSAGE s999 WITH 'Parameter_expected'.
WHEN 10.
MESSAGE s999 WITH 'Too_many_parameters'.
WHEN 11.
MESSAGE s999 WITH 'Illegal_command'.
WHEN 12.
MESSAGE s999 WITH 'Wrong_asynchronous_parameters'.
WHEN 13.
MESSAGE s999 WITH 'Cant_enq_tbtco_entry'.
WHEN 14.
MESSAGE s999 WITH 'Jobcount_generation_error'.
ENDCASE.
I hope this helps,
Regards
Raju Chitale
Edited by: Raju Chitale on Dec 22, 2008 5:38 AM -
Excel file upload in background
Hi
any one inform me how to Excel file will be Executed as a background job.
The Excel file will be executed as a background job.
This will eliminate issues related to network speed,
time-outs,user logging off,ect;
and the need for the user to remain logged in to the transaction till it finishes
execution. After the background job completes the output report will be sent to the
user via email as an attachment.
Regards
Gopal
Duplicate thread.
Edited by: kishan P on Aug 24, 2010 10:39 AMhi,
function module for email attachment -
function module SO_DOCUMENT_SEND_API1
function module for background schedule - u2018ALSM_EXCEL_TO_INTERNAL_TABLEu2019
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
link for help -
Re: Excel file upload through BAPI in BACKGROUND
Rgds
Raj -
ICR - File Upload, FBICRC_S_UPLOAD is missing
Dear experts,
I want to expand the Data Selection Process of ICR to manual file upload.
I also read the following thread, which explains how to involve Companies via file import.
Thread: IC reconciliation process with file import
Problem 1:
In this thread its mentioned that I could use the delivered structure FBICRC_S_UPLOAD.
But unfortunately this structure is missing in my system.
Has somebody an explanation for this?
Problem 2:
Alternative I used structure FBICRC_S_SELECT_003 for the manual company.
But when I want to upload a file during data selection, the process displays me that "Buchungskreis" is missing in the file. But when I take a look at the structure FBICRC_S_SELECT_003 no field is named "Buchungskreis".
Does somebody has an explanation for this behaviour?
Thank you in advance for all answeres
TomHello Sebastian,
#1 If I am understanding you correctly you have 2 entries for each company in FBIC032 - one to select customer/vendor open items and one to select GL open items. However, when you run FBICS3 for these companies only AR/AP open items are selected and transferred. Is that correct? What is the result if you run data selection for GL open items only, i.e. if you specify the corresponding SEQNR on the selection screen (hint: you may have to enter the command ADMIN in the OK code field in order to see the field on the selection screen).
#2 You assigned documents to each other and they are not shown in the bottom part of the display. Were there any differences in the document groups you created? If not, are the document groups shown when you use function Without differences?
#3 If you run data selection, automatic assignment, interactive reconciliation (making additional assignments) and then run data selection again no assignments should be deleted. This would only happen if you deleted the transactional data.
#4 Please check your definition of object groups and sets. Do the used sets actually contain values? Did you also apply the corrections referred to in note https://service.sap.com/sap/support/notes/1267185 - especially note https://service.sap.com/sap/support/notes/1062292 ?
#5 Is the selection of GL open items taking long or is it the combination of GL open items plus AR/AP open items? How many data records are transferred and how long does this take?
#6 Since there are usually various sender systems and sender companies with different operative accounts involved in ICR and data selection is usually a central process (scheduled as a batch job and not run by the individual users) the only way to restrict GL accounts is to implement the BADI. The BADI method can be implemented taking into account which sender system and which sender companies are involved.
Hope this helps,
Ralph -
Create an iview for batch document upload to KM
Hi, I´m trying to create an iview for batch document upload to the portal. At the moment, I've only been able to upload documents from a source directory in the server, given an xml file uploaded from the client, which indicates the location of these files.
The inclution of the uploaded file to KM is not an issue, that is already solved. I'm just trying to make it usable by an administrative user that may not have access for creating folders in the portal server, unlike me.
I need help doing one of these two things:
1. creating an upload percentage status bar
or 2. accesing the client's directory to upload and insert the file into the repository one by one.
Can anyone help?
(by the way, I'm trying to to exactly what the portal epa import iview does, but with documents, so i know it's possible, i just don't know how)See /thread/71174 [original link is broken]
-
Schedule a CSV File upload?
I have a requirement from a customer to upload a Exchance Rate Currency file into an Oracle 10g database table at a specific time every day. I can see how to upload the table, but I need to know if there is a way to schedule this to happen daily and if there are instructions on this process.
I am using the utillity in Enterprise Manager to upload data from a CSV file.
Thanks,
WinstonThanks guys. I am actually running 10g on a Windows
platform, so I can't follow the guidelines for that.
HJ, can you expand a little on your suggestion? That
doesn't mean anything to me. I'm fairly new to the
Oracle DB.
Thanks,
WinstonOK, so write a batch file (to invoke sqlldr) and schedule it through the Windows scheduler. Same principal as writing a shell script and scheduling with cron. -
How to run batch file from oracle forms 9i
Hi everyone.
i have a data in csv file. i want to upload it to my database. i am using sql loader for it.
i have made a batch file which run the sql loader and transfer my data to database.
How to run batch file from oracle forms 9i.
when i press the button, nothing uploads in my database. (when i simply run the batch file it works).
here is my code
Begin
HOST('C:\temp\batchfile.bat');
message('done');
end;
Thanks in advance
regards
sajidthis is my log file, when i run manually.
SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jul 1 23:27:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: file_to_upload.ctl
There are 2 data files:
Data File: sk.csv
Bad File: sk.bad
Discard File: none specified
(Allow all discards)
Data File: sk1.csv
Bad File: sk1.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table KHAN, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
SR FIRST * , O(") CHARACTER
DATES NEXT * , O(") CHARACTER
AGENT NEXT * , O(") CHARACTER
COUNTRY NEXT * , O(") CHARACTER
TRANSACTIONS NEXT * , O(") CHARACTER
PKR NEXT * , O(") CHARACTER
USD NEXT * , O(") CHARACTER
BANK NEXT * , O(") CHARACTER
Table KHAN:
11088 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 132096 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 11088
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Thu Jul 01 23:27:53 2010
Run ended on Thu Jul 01 23:27:54 2010
Elapsed time was: 00:00:00.63
CPU time was: 00:00:00.17 -
I am attempting to code a JavaBean wrapped by an applet that will upload multiple files to a web server via the multipart/form-data mime-type.
I have moved a number of files to the web server with limited success.
I cannot move more than roughly 30Mbs of files in any configuration without causing a fatal exception.
I am confident that it is a limitation of the client's VM and the memory allocated to the applet.
I have seen several commercial grade applets that claim they can move any number of files even totalling 180Mbs.
My applet is very simple. It opens a JFileChooser dialog box, allowing the user to select multiple files and communicates directly to a server side component that accepts multipart/form-data.
I am navigating the protocol just fine. It seems to be a memory problem on the client side. Does anyone know how I can defeat this restriction and pass a reasonably high number of files (100-200) ranging from 50Mbs to 180+Mbs?
Secondly, why does this happen: when I put my files onto the output stream, no files move accros the stream until I call .close(). How can I write the code to begin transferring bytes as soon as I call outputstream.write(xxx)?i am also developing multiple file upload applet and i transferred 1,4gb of data (2 files a 700MB) successfully.
also, i just transferred a few hundred files with total size of 900mb to my localhost webserver (~5000kb/s)
1) open file
2) read a few kilobytes into buffer
3) send them to the server
4) flush the outputstream (!!)
5) clear buffer and goto 2)
6) if end-of-file, close the file and flush again.
the outputstream is flushed every few kilobytes, so it will be sent over the socket to the server and not buffered until dawn.
i don't know how the server-side is working, but i used apache/php script.
you can try out my applet under
http://www.haller-systemservice.net/jupload/ -
SPL Delta file upload purge process
Please indicate how GTS tables are purged prior to running the SPL delta file upload batch.
Hi, I am not sure I understand your question,
The Tables do not need to be purged prior to uploading delta files, as changes will overwrite the existing Data. If you want to delete entries you need to follow the instructions as they where given to my by Chris Koniecny and that would be the following:
If I understand the question correctly, you will have to archive the old SPL Master Data using the SPL_MD archiving object. This archiving object will allow you to create an archive of your current SPL Master Data (e.g. flat file) and then allow you to delete all data from the /SAPSLL/TSPL, /SAPSLL/TSPLA and /SAPSLL/TSPLN tables -- these tables are part of the SPL_MD archiving object. Once you have archived and deleted the prior SPL Master Data, you ought to be able to load the new SPL Master Data without any problems.
This method of course has pitfalls. If you're upgrading your SPL Master Data from the non-extended XML data to the extended XML data of the SPL entities, your audit trails will lose some details (e.g. which SPL entity matched on a specific business partner). Another pitfall is the amount of time it takes to rescreen all of the business partners against the new SPL Master Data. You may also encounter a large amount of blocked business partners as a result. My advice is to definitely test in a non-production environment.
Yet as I said you do not need to purge the data prior to every upload of delta files but you must know the following. Some Providers will give you delta files with entries of expired Sanction Parties with a validity date in the past so that you can upload delta files. Some will not do that and on their delta files, the expired parties are just not in anymore. With these you are obliged to load the full data set everytime and can not work with delta.
Hope that helps. -
Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB
Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara -
I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
I'm trying out vCenter 5.1 with Update Manager 5.1 right now. No license key has been entered and I still have 50 odd days to try it out.
2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
File name: VMware-VIMSetup-all-5.1.0-799735.iso
Failed to transfer data
Error was: A web exception has occurred during file upload
I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
I've disabled firewall, and there is no anti-virus program on the server. I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts. Unless there's a special image file I need to download?
I'm at lost on what I can do to make it work. Please advise.
Thanks.The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
André
Maybe you are looking for
-
ArchWiki: suggestion for a new page layout
Finally, I have some time to spare for ArchWiki improvement. I have modified my article on CMYK support in The GIMP as an example. Please take a look at it here: http://wiki.archlinux.org/index.php/CMY - n_The_GIMP The code to produce the box on the
-
Formula headings in BEx shows UID....
In the formula description I have "% change vs last year". When I execute it in BEx the heading displays "Formula 4AN7E9DVTL4EKQ3AKQFJMB7KJ (which is the UID). I can not get it to display "% change vs last year". I have checked and unchecked "Use
-
I have recently had a problem that is extremely annoying. I happens even if I am using the mac at the time. What happens is that all of a sudden there are 3 Z's that appear in the centre of the screen then my Imac goes to sleep. This has been happeni
-
Why cube cannot exceed 16 dimension tables?
hi experts, why a cube can't exceed or limited with 16 dimension tables,what is the background or technical specification for this limitation what is answer if i questioned, why you cannot create more than 16 dimension tables for a cube. pl help me
-
Spotlight (mds) always takes 4+ gb real memory
Hi all, setup: mac pro 2008 8-core, 16 gb ram, 4 HDs (1 SSD, 1x2TB, 2x1TBs combined into a single 2TB raid 0), and a time machine disk Since Snow Leopard, the mds process has been taking much more memory than it should. In Snow Leopard, the console r