Grand Total a Percentage

So I am calculating the % change between two Quarters with the following formula:
((Current Qtr / Prior Qtr) -1) *100
my rows are calculating correctly but my column's grand total does a sum and it isn't correct. How can I get my grand total to calculate similar to my rows in my table?

Hey Lacey - I followed your instructions and am able to calculate the correct total % change:
((SUM(Current Qtr) / SUM(Prior Qtr)) - 1) * 100
That is now displayed in it's own column (or I can hide it and don't see it at all). How do I get that value to display in the grand total of the standard % change column?
Thanks!

Similar Messages

  • Formulated Grand total as percentage value

    Hi,
    Here is my sample data
    Val1 Val2 Percentage( Val2/Val1 )
    59 16 27%
    19 4 21%
    78 20 26% (now instead of getting 26% i'm getting 48%). How to get formulated grand total value based on previous two columns ?
    Thanks

    Try this: on your Percentage column, change the aggregation rule to "server complex aggregate."

  • Percentage calculation at Grand Total Level

    Hello,
    I have issue in calculating the percentage at grand total level. I have three measures (A count, B count and Total count). These measures are defined in rpd with aggregation rule as sum. In answers i am calculating A % as 100*A count/Total Count. I have defined the aggregation rule for this percentage column as default. I am able to get correct % results for sub total level but getting wrong percentage values when Grand Total level is added. Going through some posts in this forum, people have suggested to enable this tag in instance config file.
    <ReportAggregateEnabled>true</ReportAggregateEnabled>
    After adding this tag, i am able to get correct results. The issue is when there is no data i am able to see table view with all columns having blank values even though i have defined the no result view.
    Please Help

    HI,
    For your CKF set exception aggregation as summation based on the last most characteristic in the row in the reference(as per the example it is product)
    Regds,
    Shashank

  • Percentage in Totals / Grand Totals

    I have 2 columns on a report (in reports builder) that have numbers - total touched & total count. I am calculating the percentage done with the following formula: ROUND(((PP_TOUCHED / PP_TOTAL) * 100),2). This works fine for the detail lines, but I can't get the correct percentage in the grand totals.
    Also, when I use the above formula and one of the numbers is zero, I get an error.
    Kris

    I have 2 columns on a report (in reports builder)
    that have numbers - total touched & total count. I
    am calculating the percentage done with the following
    formula: ROUND(((PP_TOUCHED / PP_TOTAL) * 100),2).
    This works fine for the detail lines, but I can't
    get the correct percentage in the grand totals.How are you calculating the percentage for grand total? Create a formula column at report level and use summary columns in the formula to calculate percentage.
    Also, when I use the above formula and one of the
    numbers is zero, I get an error.
    It may help:
    ROUND(decode(nvl(PP_TOTAL,0),0,((PP_TOUCHED / PP_TOTAL) * 100)),2)

  • Grand total level of the percentage column giving value from the first row of column

    Hi Guys,
    I have a requirement like to show the percentage value which the calculation of two columns , in the grand total level .
    I think it can be achievaable by giving the aggregation rule for that column as Server complex Aggregate .
    eg.
    Fiscal Year  Department  subdepartment   Total cost     Sub Department cost     % cost
    2011           Edu             Books                 500              50                               10
    2011           Edu             Note Book           200            100                                50
    2011           Edu             Furniture             300             30                                 10
    2011            Edu                                      1000           180                              18
    Grand Total
    Ideally it should come like as above ..but the problem with me that ,it showing correct value for  all the rows ,but at the grand total level it's taking the value of % cost from the first row . like below..
    2011           Edu                                   1000                  180                         10
    Grand Total  
    I have calculated the % cost column in the answer itself  as (Sub Department cost /Total Cost )
    where the
    Aggregation rule for the columns given are
    Total Cost - Sum  ,Sub Dep Cost -  Sum, % Cost - Server Complex Aggregate
    So plz suggest me any Idea to achieve this ..Thanks in advance.

    Give the agg. as avg for % field.
    Best of Luck,
    Kashi

  • RE Invoice Grand total plus extra percentage

    Hi expert,
    Does anyone know how to put 1% charges on Invoice grand total? I'm using classical Real estate module.
    Appreciated your help.
    Thank you in advance,
    Mahyuddin

    Hi Franz,
    We are rental & utility service provider which begin Feb 2012 the management decide to include  extra 1% charges on grand total (per invoice) as part of government contribution (not as gov service tax) to tenant. Therefore, that extra 1% must hit another G/L account (except current setting in account determination);
    example;
    Invoice 8xxxxx
    1.00OY0201.02         240 M3 x 0.49       117.6 MYR
    2.0AC02341.01         150 M3 x 0.13       19.50 MYR
    Total                                                         137.1 MYR
    1% (Contribution)                                         1.37   MYR
    Grand total                                               138.47 MYR
    1. How to config extra 1% charges?
    2. How to config that particular G/l and it becomes work like other account determination setting
    3. Any suggestion?
    Thank you for your kindness in advance.
    Mahyuddin
    Edited by: Muhd Mahyuddin Zakaria on Jan 22, 2012 2:25 AM

  • Percentage of Grand Total Per Detailed Row.

    Hi All,
    New to BI Pub and I am trying to go through the blogs and forums.
    I have a question about how to insert % of grand total in a table.
    I have the following requirements....
    Group by: State
    City | Sales | % of Grand Total Sales
    Albany 100,000 10%
    Buffalo 500,000 50%
    New York City 400,000 40%
    State Total <NY> 1,000,000
    so on so forth....
    Grand Total Sales 1,000,000
    The summing of sales by state and grand total, i got so far.
    I'm having trouble on % of Grand Total Sales by City.
    For each city, i need % of the total sales.
    How do I do that in an RTF template?

    Hard to say without seeing some sample XML data. In principle...
    <?SALES div sum(//SALES)?>
    But you might want to use the ratio_to_report function in your query instead.

  • OBIEE 11g Grand total issue

    Hello,
    I have one requirement where I want to show the data as follows
    Type          Metric          Values
    Type1          units          100
              Days          50
              % Calc     10%
    Type2           units          100
              Days          50
              % Calc     10%
    Type3          units          100
              Days          50
              % Calc          10%
    Total units     300
    Total Days     150
    Total % Calc 30%
    If I take grand total of row in pivot table, I am not able to show Total units, Total Days and Total % Calc values in Grand Total because by default, same grand total name appears.
    I want to give different grand total names and percentage sign should appear in grand total.
    Please let me know if u need any more information.
    Thanks.

    Try to recreate the report. Just in case make sure that you dont have null values in that metric or try with ifnull(col,0)
    Check this bug too BUG:9871470
    Keep update

  • % of calculation in GRAND TOTAL in PIVOT TABLE

    Hi Gurus,
    I have a requirement to calculate the percentage based on the grand total in pivot table,but in row wise i am getting the percentage while in grand total level i am not getting correct values.I have tried with all the options like:average,Sum,Default,Max,Min,count etc and also with the percent of row,column,parent column etc.
    Please give me a solution for this ASAP.
    view of my table is
    Previous Value||Present Value||change between Pres & Prev||% of change(((pres - prev)/pres)*100)
    10||20||10||50%
    00||01||01||100%
    10||05||-05||-50%
    here i should get values in grand total like
    20||26||06||23%
    but i am getting values when giving sum for %of calc in measures values
    20||26||06||100%
    if i give avg for %of calc in measures values then i am geting
    20||26||06||33%
    how to solve this prob.Can any one give sol plzzzzzzzz
    Thanks,
    Naveen

    Hi,
    Refer : http://www.skurabigroup.com/blog/?p=579
    Regards,
    Srikanth

  • How to hide % measure column Grand Total  value in Pivot View in obiee 11g?

    Hi ,
    I am facing a issue in obiee 11g .I am using a Pivot table to display the grand total of 3 metric columns eg: A , B,  C out of which B is percentage  so I need to remove the grand total value of the percentage column. We have to stick to Pivot View only. Anyone can sugest me on this?
    Thanks ,
    Shruti

    Move B to rows section or cast to char in Criteria tab by keeping the B in Measures section only.
    cast(B as char)

  • Grand Total % Variance

    Hi,
    I have a Report for GL Reconciliation and it shows Source System Balances and GL Balances along with the Variance in these two and % Variance.
    Sample data is as follows:
    Year     Month     SYS     Source System Bal GL Balances     Variance     % Variance
    2010     MAY     A     66,100,676,002     60,994,246,811     -5106429191     -8.37%
    2010     MAY     B     29,081,192,665     29,066,650,415     -14542249.78     -0.05%
    2010     MAY     C     218,856,115     212,416,688     -6439426.71     -3.03%
    2010     MAY     D     14,601,939               -100.00%
    2010     MAY     E     808,716,681     822,453,990     13737309.05     1.67%
    2010     MAY     F     5,874,200,259     6,856,456,401     982256141.3     14.33%
    2010     MAY     G     2,181,160,124     2,164,379,222     -16780901.26     -0.78%
    2010     MAY     H     10,505,609,797     23,529,905,894     13024296097     55.35%
    2010     MAY     I     1,566,030,457     1,565,502,039     -528418.48     -0.03%
    2010     MAY     J     1,479,284,089          100.00%
    2010     MAY     K     10,939,680,559     7,481,930,011     -3457750548     -46.21%
    2010     MAY     L     8,774,737,817     8,831,160,339     56422521.84     0.64%
    2010     MAY     M     1,117,717,954     548,331,847     -569386106.3     -103.84%
    2010     MAY     N     73,670,961     55,680,430     -17990531.39     -32.31%
    2010     MAY     O     4,583,263,229     4,562,122,752     -21140477.19     -0.46%
    2010     MAY     P     204,382,965     206,288,734     1905768.97     0.92%
    2010     MAY NULL          332,763,879          100.00%
         MAYTotal          142,044,497,524     148,709,573,543     6665076018     4.48%
    Now This is how the Report will work as Normal...
    What the user wants is Instead of Variance he wants to see the Absolute variance. So If I run absolute function on This Column, I will get following results:
    ABS(Variance)
    5,106,429,191
    14,542,250
    6,439,427
    13,737,309
    982,256,141
    16,780,901
    13,024,296,097
    528,418
    3,457,750,548
    56,422,522
    569,386,106
    17,990,531
    21,140,477
    1,905,769
    6665076018 --- -This Total is Incorrect as it is showing only the Absolute value to the Total, where as it should be More than this and to achieve this, I changed the Aggreegation Rule to SUM
    to Get the correct sum of the figures mentioned ablove which will show following output:
    ABS(Variance)
    5,106,429,191
    14,542,250
    6,439,427
    13,737,309
    982,256,141
    16,780,901
    13,024,296,097
    528,418
    3,457,750,548
    56,422,522
    569,386,106
    17,990,531
    21,140,477
    1,905,769
    23,289,605,688
    Now Till this point everything is correct and can be achieved. The problem is with the % Variance:
    Bydefault % Variance ( Calculated using Variance/GL Balances )*100 Is as follows:
    % Variance
    -8.37%
    -0.05%
    -3.03%
    -100.00%
    1.67%
    14.33%
    -0.78%
    55.35%
    -0.03%
    100.00%
    -46.21%
    0.64%
    -103.84%
    -32.31%
    -0.46%
    0.92%
    100.00%
    4.48%
    But the Users wants that The % variance be calculated on Variance Column and GL Balances Column ( Variance/ GL Balances)*100
    But the Grand Total values at the bottom should be based on ( Grand Total of ABS(Variance)/ Grand Total of GL Balances ) *100
    to get the Desired results as :
    % Variance
    -8.37%
    -0.05%
    -3.03%
    -100.00%
    1.67%
    14.33%
    -0.78%
    55.35%
    -0.03%
    100.00%
    -46.21%
    0.64%
    -103.84%
    -32.31%
    -0.46%
    0.92%
    100.00%
    15.66%
    (23,289,605,688/1,48,709,573,543)*100
    If someone can help me with this...
    Edited by: help-required on Oct 1, 2010 1:14 AM

    OK, there are a couple of things that have to be pointed out before getting to the actual problem. First of all, the column you named "Variance" is not a variance, but a "difference" and should be labeled as such. Second, what is the variance you are trying to calculate?
    If the variance is from the "Source System Bal," then the calculation is ("GL Balances" - "Source System Bal")/"Source System Bal"
    If the variance is from the "GL Balances," then the calculation is ("Source System Bal" - GL Balances")/"GL Balances"
    You have ("GL Balances" - "Source System Bal")/"GL Balances" so do you know what you are measuring? Make sure you get this part right first. Now on to the issue itself.
    This is the point of confusion with some I think: you want the individual rows of the "% Variance" column to display the +actual+ variance, positive or negative, but in just the total at the bottom, you want the "% Variance" to reflect the "absolute values of the differences, summed, and then divided by the GL Balances."
    You can't have two different calculations on the same column like that, one for the rows and a completely different one for the total.
    Here's a workaround. Uncheck the "totals" for the pivot table completely and just show the rows. (Make sure you change the name of the "Variance" column to "Difference" or something similar.)
    Now create another pivot table view, but take out all the attributes so the measures sum up. Add an additional column called "ABS % Variance" and make this calculated column (do this in Criteria in the fx of a "dummy column"):
    (ABS("GL Balances" - "Source System Balances")/"Source System Bal")*100.00
    Don't forget to change the data format to "percentage."
    Now place this pivot table view directly below the one with the individual rows. You should now have what you are looking for.
    Edited by: David_T on Sep 30, 2010 10:58 AM

  • Grand Total formula different from Subtotals

    Hi,
    i've a question. Suppose i have a normal table (No pivot) with 2 columns: Month and Salary percentage on Month.
    In addition i have subtotals on Month column and a Grand Total. I have a situation like this:
    Month Salary percentage on Month
    30
    January 20
    50
    January Subtotal 100
    20
    February 70
    10
    February Subtotal 100
    Grand Total 200
    In Salary percentage on Month field I have as aggregation rule Sum because i want that subtotals are the sum of single rows of the month.
    But i don't want this for grand total. It should be 100 (max of subtotals).
    Is it possible specify a different formula for Grand Total respect to that used for Subtotals?
    Thanks
    Giancarlo

    If your formula already contains any summarized fields then you cannot summarize that formula. Try creating a mannual running total like this
    whileprintingrecords;
    numbervar i;
    i:=i+@formula;
    Now place this formula in group footer or header and suppress this formula. Create a new formula like
    whileprintingrecords;
    numbervar i;
    Place this in report footer which shows the grand total.
    Reagrds,
    Raghavendra

  • Advanced Table with Grand Total

    I have an advanced table created at the design time with property "Records Displayed" is set to 10. That means, i can able to see 10 records at a time. i have click on Next "Next 10" link to see the next 10 records. i have created a footer with Total. it is showing the sum of the column for the 10 records at a time. Every time i click on "Next 10" , it shows the next 10 records and give me total for current 10 records.
    My requirement is show the grand total in the footer. is there any simple setup to show the grand total instead of current page total ? Can i replace the current page total with grand total ? if so, how can i get the handler for the total ?

    We have not implemented this functionality but OAF Dev guide [11.5.10.2] has this info.
    Control Total Value Generation
    To bypass OA Framework's mechanism to control the value generation for a table column footer so you can
    provide your own value such as a percentage, set the
    oracle.apps.fnd.framework.webui.OAWebBeanConstants TABULAR_FUNCTION_VALUE_ATTR on the
    appropriate table column. This overrides OA Framework's internal behavior of footer value generation. Like all
    web bean attributes, you can data bound this attribute if required.
    Sample usage:
    OAAdvancedTableBean advtableBean = ...;
    OAMessageStyledTextBean salaryBean = advtableBean.findChildRecursive(...);
    String formattedTotal = ...;
    *// compute the total*
    salaryBean.setAttributeValue(TABULAR_FUNCTION_VALUE_ATTR,formattedTotal);
    or:
    salaryBean.setAttributeValue(TABULAR_FUNCTION_VALUE_ATTR,
    new OADataBoundValueViewObject(...));
    Grand Totals
    Declarative or programmatic support for Grand Totals is currently not available in advanced tables. To
    implement grand totals, you must build your own layout below the advanced table in accordance with the
    Oracle Browser Look-and-Feel (BLAF) Guidelines: Tables: Grand Totals [OTN version]. Use the
    messageComponentLayout region style to build this layout. In addition, you must programmatically provide the
    values for the grand total fields. Since these fields are like any other form fields, you can first calculate the
    grand total value in your controller code by looping through the entire view instance row range, and then call
    setText() for the grand total field to set it with the calculated grand total value.
    Hope this helps.
    --- Thanks

  • Grand totals across hierarchy

    What's the best way to calculate a grand total across a hierarchy (using hierarchical grouping)?

    Hi Mike,
    just a thought: Your aim is to have something like Total Sales (actual year) / Total Sales(previous year) displayed in your report. This is a total summary calculated upon a certain key figure which is included in the query.
    The partial summaries of your key figure are delivered correctly from your SAP system in CR for each hierarchy level. Since a total summary is not delivered the problem is now that you do not have access to the sums for the sales of the previous year in your query. This way you could sum up in CR the sales for the actual and the previous year and calculate the total percentage manually at the end.
    Assuming now that you do have the partial sums of the sales for the actual year in your query though, you can indirectly calculate the partial sums for the previous year :
    Sales(previous year)@HieracrhyLevel X = Sales(actual year)@HierarchyLevel X / Percentage Key Figure@Hierarchy Level X.
    All you have to do now is to pick up a specific hierarchy level (you know how to do this) and sum up the calculated sales from previous year and do your percentage calculation based on the total sums  at the end.
    Hopefully you do have the sales of the actual year in your query as a separate key figure.
    Regards,
    Stratos

  • OBIEE 10g - Unable to see data in the report view with grand total applied

    Hi,
    We're facing with a strange issue.
    We're working on a report view.
    We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
    Please help.
    Thanks in advance.
    -Rama

    Hi Dpk,
    Thanks for your reply.
    I included it in the instanceconfig.xml, but the issue still exists.
    Couple of Observations
    #1 - We noticed this issue when we drill down to the level which has really sparse data.
    It works fine when we look at the enterprise wide report.
    #2 - Works fine with few dimensional attributes and facts on the report
    When we add a fact that doesn't have any value at that level, the issue starts to appear.
    Thanks in advance.
    -Rama

Maybe you are looking for

  • While creating the Data source for Sql server am getting this error?

    Hi i new to Power BI sites and office 365, For my first step  1. i have successful creaeted Gateway in Office 365 2.Now i have creating  the Data source for that gateway using Sql server R2 3.While Creating the Data source using the Corresponding gat

  • Download internal table to Excel sheet

    Hi, I am trying a sampole program to download an internal table to excel and am uisng the Fm GUI_DOWNLOAD for the same. But how do I ensure that each column of internal will be aligned as columns in the excel sheet to. I a trying to do that with a se

  • ABAP Dump when executing tcode CATS_APPR_LITE for multiple selection.

    Dear Members, Issue: When executing tcode CATS_APPR_LITE for Time Approval from the remote R/3 by selecting multiple selections and click on Approve, if you get a dump saying CALL_FUNCTION_REMOTE_ERROR Analysis: If there is an SAP Note applied in 136

  • Sync/Async JMS without BPM - No receiver specified in message object

    Hi All, My scenario is Proxy - JMS - Proxy.  I have chosen to do this without BPM and had followed closely to the instructions given in various help documents/blog/forum threads.  During testing, the proxy returns a system fault 'No receiver specifie

  • Why does the side scroll in the app store drop down?

    Hey everyone, I figured I'd post a question in relation to something that has been nagging me... Everytime I go to the app store and review the scrollable screen shots on the details tab, the screen drops down after each pic. Is this a iPhone 4S thin