Group by and partioned by
Hi
Can any one explain difference between group by and partioned by
Regards,
Hi,
Group functions operate on sets of rows to give one result per group.
group by functions:
AVG
COUNT
MAX
MIN
STDDEV
SUM
VARIANCE
each group defined with GROUP BY clause in a SELECT statement is called
a partition. A query result set may have just one partition holding all the rows, a few large
partitions, or many small partitions holding just a few rows each.
In such cases analytical functions are used for each row in each parition
regards
nic
Similar Messages
-
I need to show grouped id and only the max order value for each unique id
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select #Temp1.id, max(#Temp1.[OrderOfVisit]), #Temp1.VisitNote
from #Temp1
group by #Temp1.id, #Temp1.OrderOfVisit, #Temp1.[VisitNote]
ORDER BY #Temp1.id
drop table #Temp1
---I need to show grouped id and only the max OrderOfVisit for each unique id, and the VisitNote for each OrderOfVisit
----------------need help-------------Sounds like this
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select id,OrderOfVisit,VisitNote
from
select #Temp1.id, #Temp1.[OrderOfVisit], #Temp1.VisitNote,ROW_NUMBER() OVER (PARTITION BY #Temp1.id ORDER BY #Temp1.[OrderOfVisit] DESC) AS Seq
from #Temp1
)t
WHERE Seq = 1
ORDER BY id
drop table #Temp1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
This would be an SMS group similar to an email listserv but running on the SMS network
I have seen private individuals offering this service
It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
SteveI think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.
-
Ever since I updated my 3gs (on ATT) to 6.1.3, it will no longer send or receive group texts, and it won't send picture messages
(though I seem to be able to receive picture texts). I've looked around on the boards, and here's what I've tried so far (to no avail):
1. Tried simply turning off / on
2. Tried hard reset
3. Tried having imessages off
4. Turned group messaging off / on (tried while it was off)
5. Turned off all messaging, turned phone off / on, turned all message settings back on
6. Reset network settings
Help! Argghh!!! I never had this much trouble when my previous phone was jailbroken! Here I am, trying to be good!Thanks, Nick. Calling ATT is a last resort; it's a software issue, I'm sure, and I've also found other
people having the same issue, but none of the fixes work. I reset all my settings: nothing. I'm not sure what you mean by restrictions. -
CiscoWorks user options "device type groups|switch and Hubs"
Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
+ Routers
+ Switches and Hubs
+ Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot ! -
Group above and left classic reports
how can i group above and left in an existing classic reports? is there any document around here please share it to me.
>
Please update your forum profile with a real handle instead of "user13653962".
how can i group above and left in an existing classic reports? What does "group above and left" mean? A demonstration layout on apex.oracle.com or here (using tags<tt>\...\</tt> tags to preserve formatting) would be helpful.
The options for break formatting on classic reports are:
<li>The basic built-in control break features.
<li>Simple DIY break layout on any number of columns using analytics in the source query: +{message:id=10679160}+
<li>Complex report layout with multi-level headings using analytics in the source query and a custom named column report template with conditional row templates: +{message:id=9816577}+
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand. -
Problem in creating group above AND group left in one report!
Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw -
Group By and Detail section should be at same page
Hi
I am developing a Crystal Report in Visual Studio 2005. My report have one Group Section and two detail ( detail a, detail b) sections. In group section I am displaying Test Categories and in Detail Section (detail a) I am displaying Test Result for particular Test Categories, in detail (detail b) section I am conditionally displaying a sub report against a particular testid from detail (a) section.
I want to display all test results against a test category on the same page. If this fit on the page it should display otherwise category name and all its test should be display on next page.
Thanks in advanceQasim not sure if you have tried this already,
right click on the group (that blue bar) and click Change Group-->Options->Keep Group together.
This will keep them together and if it exceeds one page it will start from the new one.
Hope this helps
Regards
Jehanzeb -
Group image and text in pages grayed out
group image and text in pages grayed out... any help please?
They both have to be free floating objects ie an image/shape/table/chart/textbox not inserted in the text.
Peter -
How do I send an email with a group address and not show the addresses/names of the recipients?
Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.
-
How to send a group email and have the recipients hidden?
How do I send a group email and have the recipients hidden?
I have a new OSX 27" iMac that is running Maverick.
RE: group emails, I am trying to omit individual recients and have tried the following options without success.
1) Mail- Composing- checked "Automatically- Bcc"
2) Mail- Composing- unchecked "when sending to a group, show all member addresses"
The result is that all names continue to show up with email addresses for group emails.
HELP! HELP! HELP!
Lynn -
How to make a group name appear as the group name and not "Undisclosed Reci
About Group Names:
I made a group of about 15 people. I named that group “BASEBALLERS." I have another group that I labeled ”BASKETBALLERS." When I want to send info that pertains to both, I type out each group name and they both appear in the “To:” field with those names I created.
However, when I receive copies of this email, the group names BASEBALLERS and BASKETBALLERS gets changed to boring old ”Undisclosed Recipients.“
Is it possible for everyone to receive my emails and see the two group names instead of ”Undisclosed recipients“?
Thank you. According to the Help Menu in Mail, it should be possible. Or does it have to do with individual ISPs?
-Lorna in Southern California
http://web.mac.com/lorna6Hi DazFaz,
true, but with an array with length of 1 rounding down
prevents an index
out of range error.
In you original code you 'round down' by multiplying by the
length of
the array -1 while I round down with Math.floor (and multiply
by the
actual length of the array).
Is there a difference in result?
The code below can yield 1 while the array may just be 1 item
long:
var arrayLength:Number = 1;
var rnd:Number = Math.random() * arrayLength;
var rndV1 = Math.floor(rnd);// Rounds ONLY down to the
nearest integer
var rndV2 = Math.round(rnd);// rounds up OR down to the
nearest integer
trace(rnd + "\t" + rndV1 + "\t" + rndV2);
so either decrement the length or floor the number. Same
difference (No?)
I love puzzels :)
DazFaz wrote:
> Hi Manno Bult.
>
> The problem with user Math.floor is that it only moves
in one direction and
> that is down to an integer.
> With Math.round ir rounds off the number to the nearest
integer.
>
> If you run the code I have modified from yours, you will
see what I mean. You
> will notice that rndV1 always stays at 0 yet rndV2 will
deviate from 0 to 1.
> Making it a more accurate way of finding a true random
number.
>
> var rnd:Number = Math.random();
> var rndV1 = Math.floor(rnd);// Rounds ONLY down to the
nearest integer
> var rndV2 = Math.round(rnd);// rounds up OR down to the
nearest integer
>
> trace(rnd + "\t" + rndV1 + "\t" + rndV2);
>
Manno Bult
[email protected] -
When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?
If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
Need help with Group Headings and showing them on drill down.
Hi all:
I think this is a simple question and feel that I should already know the answer but for some reason it eludes me. What I would like to know is the proper way to hide/display group headings and have them show up on drill down BUT not repeat on each group header.
What I have for grouping is as follows:
Group Header #1 u2013 Sales Rep
Group Header #2 u2013 Customer
Group Header #3 u2013 Product Class
Group Header #4 u2013 Stock Code
Details
Group Footer #4 u2013 summary calculated on this line
Group Footer #3 u2013 summary calculated on this line
Group Footer #2 u2013 summary calculated on this line
Group Footer #1 u2013 summary calculated on this line
My goal is to have my report show only the lines listed below by default and allow the user to drill down group by group to the details section:
Group Header #1 u2013 Sales Rep
Group Footer #2 u2013 summary calculated on this line
Group Footer #1 u2013 summary calculated on this line
If anyone could offer any help it would be greatly appreciated!
Thanks,
FatManclick section expert, then for example of GH3, highlight it, then click on the formula box for suppression, and put in the code....
Drilldowngrouplevel < 3
The result will be that this GH3 is suppressed whenever the report is showing GH1 and 2 but not 3.
In addition to this, you must Hide(Drill-down ok) GH3. This is also done in the section expert.
Then just do the same for GF3, and for GH4/GF4 make sure you use...
Drilldowngrouplevel < 4 -
BB Z10 BBM Group updates and notifications not showing up in Hub?
BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58.
Any workaround?vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Logging in to RPD in online mode fails after upgrading rpd from 10G to 11g
Hello guys I have an issue here.. I have everything working in 10g using external table authentications by having 2 init blocks: ISAuthorization --- row wize initailization: select 'GROUP', UG.GROUPNAME from USER_USERGROUPS FFF, USER U, USERGROUP UG
-
Report script - including info which is not in Essbase
<p>Hi all of you experts.</p><p> </p><p>Here is a challenge for me. Is it also a challenge for you...oris this just piece of cake??</p><p> </p><p>I need to produce a report script against Essbase, where some ofthe data does not exist in Essbase. I am
-
Hi All, What all the advantages for implementing ESS and MSS to the company? Regards, Sita
-
Why am I being charged for Washington and Spokane taxes when I live in California
-
ME 807: System error: error during insert in table KONV
Hi, I got the below error when creating PO using ME21N, what should I do? ME 807: System error: error during insert in table KONV Thanks.