Groups created with dscl not showing in WGM?

When creating a group "testGroup1" via dscl as follows ...
      Dscl -udiradmin /LDAPv3/mac-mini.local -create /Groups/testGroup1
The group shows up when running ...
      Dscl -udiradmin /LDAPv3/mac-mini.local -list /Groups
However, in Workgroup Manager the new created group"testGroup1" does not exist.
Is there a way to determine where exactly the newly created Group is located?
I did notice that the Workgroup Manager directory location is /LDAPv3/127.0.0.1.
Does the 127.0.0.1 have something to do with it?
Also, if I try to run the following ...
      Dscl -udiradmin /LDAPv3/127.0.0.1 -list /Groups
I get an error saying "Data source(/LDAPv3/127.0.0.1) is not valid.
I know it's there because it shows when I run a different tool called Ldapmanager.
But for some reason it's not showing in Workgroup Manager.
I was wondering if there is some attribute (or something like that) that must be set when creating the group before it will show in Workgroup Manager.
Or maybe the server needs to be rebooted before they show? I wouldn't think that would be necessary, unless the users are being loaded when Workgroup Manager loads.
Any help would be greatly appreciated.
Thanks,
Zeek

Hi David
There is a configuration that needs to setup to turn on outbound delivery document number update in MD04.
This means if there is an STO in MD04 which is converted into outbound delivery, MD04 should now show outbound delivery number instead of an STO
Follow this path and set up the document type of your outbound delivery in it
Logistics execution -> Shipping -> Basic SHipping Functions -> Availability Check and transfer of requirements -> transfer of requirements -> Determination of Requirement Types using transaction

Similar Messages

HT3180 Anyone having trouble with Netflix not showing up in the internet menu? I am trying to do a reset, but it says it can't download latest updates try again later.

Anyone having trouble with Netflix not showing up on the Internet Menu? I have tried to do a reset and then restore, but it says that "the latest update download cannot be done at this time, try again later"

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

BB Z10 BBM Group updates and notifications not showing up in Hub?

BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58.
Any workaround?

vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Contacts created with Lotus notes are not seen in Exchange 2007 SP3 Rollup 7.

Contacts created with Lotus notes are not seen in Microsoft Exchange 2007 SP3 Rollup 7. the same is seen in Microsoft Exchange 2010 without issues.
when we create a new contact on Microsoft Exchange 2007, the contacts gets created but it is not seen unless we filter the EMC to list the contacts. Microsoft Exchange 2010 does not have any issues.
any help or inputs will be appreciated.
Thanks,
Sid

You shouldn't be using the 2007 EMC or cmdlets to create new objects if you have a more recent release installed in your organization. Use the 2010 software.
If you create the mail-enabled contact with the 2010 EMC or cmdlets do you see it in the 2007 EMC?
When you say the contact "is not seen unless we filter the EMC to list the contacts", does that mean you don't see the contact when you're looking at the "Recipient configuration" container? Is there a default filter on that container? Do you have a limit
on the number of objects shown?
As for the objects created by 3rd-party software (Lotus), are they creating the contacts correctly?
--- Rich Matheisen MCSE&I, Exchange MVP

Retreiving the content created with the Note Tool via Javascript??

Hey guys, is it possible to retrieve the text content created with the Note Tool from the tool palette in a photoshop document via Javascript? Basically, I wanted to store some text inside the Photoshop psd document, and then later on I can use scripting to access the content to be use as variables.
I have search the Javascript scripting reference pdf and the forum here, and I can't find any info the Note Tool. Much appreciated.

Ok, so I am using the activeDocument.info.keywords property to store my text content. The content is basically a chunk of text that contains some parameters that the user can modify to save out a document. In my script, I am using a variable to store the content from the info.keywords property. But my next hurdle is how can I extract specific part of that variable into other variables, like storing the C:\projects\Textures\ into another variable? I've done some research and got a sense that the "match" method in javascript along with the use of regular expressions might do the job. But I am stuck. Any suggestions?
info.keywords property has the follow chunk of text:
// file path to save
path(C:\projects\Textures\)
// save file format (psd or tga, etc)
format (tga)
// include a single alpha channel with the file y/n
alpha(n)
// alpha name - default should be "alpha1"
alphaName(alpha1)
// scale from the original size
scale(.5)
//sharpening
sharpen(.5)
script code:
var saveDoc = activeDocument.info.keywords;
var savePath = saveDoc[0].match(regular expression goes here); // how to grab C:\projects\Textures\ from the saveDoc variable???
alert(savePath);

Group Added With dscl Command Not Listed In Account Prefs

I added groups for each user per article 307128 using the dscl command:
sudo dscl . create /Groups/username GroupMembership username
sudo dscl . change /Groups/username RecordName username _username
But these new groups are not listed by the Account preferences on my new MacBook. They are listed on my iMac G4. Both machines are running 10.5.2. The accounts on the new MacBook were migrated from the iMac.
A dscl list shows that the groups are defined:
sudo dscl . list /Groups
And when I try to add a new group called _username with Account preferences I get an error saying the name is in use.
Any idea how to get Account preferences to show these groups?
Thanks.

ovithucu, in your contacts app, swipe down from the top bezel to Settings.
In the list of "Show Account in Contacts List", turn OFF each account shown, leaving none ON.
Tap the lower left BACK button.
Now, back in the main Contacts view, drag down on the screen to see the total number of contacts, what number is there?
Those are you "Local" contacts, stored locally in the device memory. Those can be cleared if you want, and start all over again.
Also, check your gmail account on a PC, login and see how many contacts you have in gmail which should be sycning to the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with newly created CM Repository NOT showing in Repositories Link

I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows). Here is what I have done so far...
1. Created a Windows file share
2. Configured a new CM Respository Manager (Persistence Mode FSDB)
I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
I restarted the service and still no luck...
How do I troubleshoot this??? I am not sure where to begin. Please be very detailed as this stuff is new to me.
Thanks,
Tom

I tried that and still no luck. Here is the interesting thing:
- If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
- If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
      "Startup Error: could not create directory:
172.xx.x.xx\folders\Root\Versions\versions"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The IP address is correct but where is the rest of this path coming from???
- If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
      "Startup Error: folder
172.xx.x.xx\folders\Root does not exist"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The folder does actually exist.
So confused...

SharePoint group containing AD security group - Check Permissions does not show correct information

I'm seeing a problem with SharePoint 2013 groups that contain Active Directory security groups. When using the Check Permissions feature to see what permissions a specific user has, it does not reflect the correct permissions for a user inside of the AD
security group. This occurs when checking permissions on a site, library, list or folder. When a user is added as a direct member of the SharePoint group it lists their proper permissions. I should note that the users ability to access the site or list works
properly and coincides with the SP/AD group the user belongs to. It's only the Check Permissions that doesn't work. This does not happen with SharePoint 2010 and the Check Permissions tool is very useful. Any ideas?

It's not wrong, it is expected behavior and working as designed. Until a user logs into the SharePoint site that is granted access via AD group, the user is not going to show under 'check permissions' as having access. SharePoint must have a record of the
user in the UIL in order to validate their access.
You're free to file an RFC with Microsoft, but the monetary impact to you must be extremely high in order for this behavior to be changed.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

PO created in SRM not showing in ERP

Dear All;
We are using SRM7, classic scenario.
The buyer converted a SC to PO then deleted it in ERP.
The SC appeared again in SoCo
He created another PO but it did not get transfeered to ERP.
In Related document of the SC, it shows the Deleted PO with status Deleted but it did not show the new one.
The SC is NOT shoiwng in SoCo anymore
In BBP_PD (document display) I can see the new PO number.
My questions:
1. How to update the staus of the SC?
2.How to transfer the PO to the backend
for your information, i executed BBP_GET_STATUS_2 but still not updated. I also checked WE05 (IDoc)
Thanks

Check the Log in RZ20 for PO.

OBIEE : Newly created rpd file not showing in the online mode in Admin tool

Hi,
I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
Thanks
Sanjay

Dear Muram,
Is did not work.
1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
Thanks
Sanjay

Help with Datatip Not showing on 2 different charts at the same time

What's up guys? I am building a massive application and came across an issue. I was able to create a smaller flex application that recreate the problem. Basically its about the datatip. Let's say you have a Main application with tab navigation that calls 2 different modules: Module A, and Module B. Module A has a piechart with datatip enabled. Module B has a linechart with datatip also enabled. For some reason the piechart datatip are showing while the linechart datatip are not showing on mouse over (only on click). Any idea what's going on or how to fix it so that both charts show their datatip on mouse over? -Thank you
Here are the codes below:
MAIN APPLICATION:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" paddingTop="20">
    <mx:VBox paddingTop="50" width="80%" height="100%" paddingLeft="50">
            <mx:TabNavigator width="80%" height="100%" >
                <mx:VBox label="Module A" >
                    <mx:ModuleLoader url="tester2.swf" width="100%" height="100%"/>
                </mx:VBox>
                <mx:VBox label="Module B" mouseChildren="true" >
                    <mx:ModuleLoader url="tester.swf" width="100%" height="100%" />
                </mx:VBox>
            </mx:TabNavigator>
    </mx:VBox>
</mx:Application>
Module A:
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"   xmlns:local="assets.*" initialize="_onInitialize( event )">
    <mx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.events.FlexEvent;
            import mx.collections.ArrayCollection;
            [Bindable] private var _chartDP:ArrayCollection;
            private function mouser(event:MouseEvent):void
                Alert.show("RPG");
            private function _onInitialize( event:FlexEvent ):void
                // set up our chart data
                _chartDP = new ArrayCollection();
                _chartDP.addItem( { quarter:1, shooter:1000, racing:400, rpg:550 } );
                _chartDP.addItem( { quarter:2, shooter:875, racing:230, rpg:600 } );
                _chartDP.addItem( { quarter:3, shooter:920, racing:310, rpg:512 } );
                _chartDP.addItem( { quarter:4, shooter:750, racing:130, rpg:489 } );
        ]]>
    </mx:Script>
    
    <mx:LineChart id="gameSales_chrt"
       dataProvider="{ _chartDP }" showDataTips="true" y="45" x="83" >
        
        <mx:horizontalAxis>
            <mx:CategoryAxis categoryField="quarter" title="Sales Quarter" />
        </mx:horizontalAxis>
        
        <mx:series >
            <mx:LineSeries yField="shooter" displayName="First Person Shooter" form="segment" />
            <mx:LineSeries yField="racing" displayName="Racing Simulation" form="segment" />
            <mx:LineSeries yField="rpg" displayName="Role Playing Game" form="segment" />
        </mx:series>
    </mx:LineChart>
    
    <mx:Legend dataProvider="{ gameSales_chrt }" direction="horizontal" x="121" y="10"/>
</mx:Module>
Module B:
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" initialize="_onInitialize( event )">
    <mx:Script>
        <![CDATA[
            import mx.events.FlexEvent;
            import mx.collections.ArrayCollection;
            [Bindable] private var _chartDP:ArrayCollection;
            private function _onInitialize( event:FlexEvent ):void
                // set up our chart data
                _chartDP = new ArrayCollection();
                _chartDP.addItem( { genre:"Shooter", quarter1:1000, quarter2:932, quarter3:845, quarter4:663 } );
                _chartDP.addItem( { genre:"Racing", quarter1:565, quarter2:875, quarter3:732, quarter4:432 } );
                _chartDP.addItem( { genre:"RPG",     quarter1:432, quarter2:743, quarter3:531, quarter4:289 } );
        ]]>
    </mx:Script>
    
    <mx:PieChart id="gameSales_chrt"
       dataProvider="{ _chartDP }"
       showDataTips="true" y="60" x="10">
        
        <mx:series>
            <mx:PieSeries
                nameField="genre"
                field="quarter2"
                labelPosition="insideWithCallout" />
        </mx:series>
    </mx:PieChart>
    
    <mx:Legend dataProvider="{ gameSales_chrt }" direction="horizontal" y="10" x="24"/>
</mx:Module>

Well upon using the debug function and having a stop at the show datatip static function, i came across this error
TypeError: Error #1034: Type Coercion failed: cannot convert mx.managers::DragManagerImpl@195b9b21 to mx.managers.IDragManager.
at mx.managers::DragManager$/get impl()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\managers\DragManager.as:15 2]
at mx.managers::DragManager$/get isDragging()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\managers\DragManager .as:187]
at mx.charts.chartClasses::ChartBase/processRollEvents()[C:\work\flex\dmv_automation\project s\datavisualisation\src\mx\charts\chartClasses\ChartBase.as:2310]
at mx.charts.chartClasses::ChartBase/mouseMoveHandler()[C:\work\flex\dmv_automation\projects \datavisualisation\src\mx\charts\chartClasses\ChartBase.as:4308]

Groups and users are not showing up in Hyperion workspace

Hi There
I am having problem with the workspace when trying to give access to reports.Problem is its not showing up groups and users in workspace.But when i tried logging to shared services its showing up all the groups and users.Its trying to communicate with native directory but not with the openldap.
Please help me.
Thanks
Harsha.

Hi,
Have you provisioned the users/groups in shared services with the correct Reporting & Analysis roles?
Cheers
John
http://john-goodwin.blogspot.com/

Numbered bullet character style with underline not showing

Hi,
I have a paragraph style for numbered bullets where I've used a character style for the numbered bullet.
The character style has an underline applied so the effect looks like white text on a blue box, the blue box being created by the underline.
The 'Paper' coloured number is showing, I can see it by placing a coloured box behind the text box to test.
But the blue underline is not showing. When I apply the character style on other text it works fine.
Could this be a bug?
InDesign CC, Mac OS X 10.8.4

Thanks for responding.
"Paper" is the colour I am using for the character colour and then using another named colour for the underline.
But it is happening the same as you suggest in your screengrab.
In my screengrab below I have put in a black box to show that there is no underline appearing!
And my paragraph style with that character style applied:
So how do we submit this as a bug? And why hasn't it been fixed before now?!!!
thanks.

Newly created layout profile not showing up in Select Profile window

Dear experts,
Background information - NetWeaver 7.0 SP15
I'm learning customizing KM layout and have created a new layout profile, which is based upon a layout set with a HTML Collection Renderer. However, when I tried to test it by assigning it to a subfolder that I created in BIUserhome folder, I can't find the new profile listed in the Select Profile window. It shows up in selection list, though, if I try to set default layout profile. Can anybody be so kind to enlighten me on this? Would I need to restart the instance in order to see the new profile?
Thank you very much in advance!
Hsiao

Hi Patricio,
Thank you for your reply. My post did not elicit any response until now.
As I could not have the layout profile coming up, I next tried the HTML Collection Renderer with layout sets. When I tried preview a path with the layout set, the layout set was not used as expected due to some error. Instead, the default layout set took over. I have a follow-up post that describes the issue (https://www.sdn.sap.com/irj/sdn/thread?messageID=804745) in case you may have an idea about the cause.
Later these issues kind of went away for reasons I'm not aware of. I haven't gone back to set up another profile again yet. But newly-created layout sets are showing up in the dropdown now.
Thank you for your other advice on using layout sets and layout profiles. I appreciate your input.
Regards
Hsiao

Gmail contacts & calender synced with IP5 not showing in icloud

I synced my iPhone 5 with my gmail contacts and calender. They show on the phone. I have icloud set up but they are not showing there. Gmail groups are not showing up either. What do I need to do?

Then let me ask you this. I use these devices, iMac, and new to iPhone5 for personal use. My email is from a pop server where we have our internet access. I surf on the phone and primarily listen to books on audible, sometimes sending emails. It sounds as if I already have gmail contacts & calender set to sync with the phone (not the email portion of gmail) that I rellly don't need icloud. Does that sound right to you? If this is the case, is there no way then to set up contact groups from gmail to the phone, except doing so manually? As I write this though, is it worth it to get everything set up on icloud vs staying with gmail based info?

Groups created with dscl not showing in WGM?

Similar Messages

Maybe you are looking for