PO created in SRM not showing in ERP

Dear All;
We are using SRM7, classic scenario.
The buyer converted a SC to PO then deleted it in ERP.
The SC appeared again in SoCo
He created another PO but  it did not get transfeered to ERP.
In Related document of the SC, it shows the Deleted PO with status Deleted but it did not show the new one.
The SC is NOT shoiwng in SoCo anymore
In BBP_PD (document display) I can see the new PO number.
My questions:
1. How to update the staus of the SC?
2.How to transfer the PO to the backend 
for your information, i executed BBP_GET_STATUS_2 but still not updated. I also checked WE05 (IDoc)
Thanks

Check the Log in RZ20 for PO.

Similar Messages

  • Calendar event created on iphone not showing in ical.

    I have a 4S and when I create a calendar event in ical, it does not show up in my ical ofn my Macbook Pro.
    I have check sync calendars in iTunes and have selected to display all calendars in my Macbook's iCal.
    Is ther some thing I am overlooking, or a step I may be forgetting?
    Thanks

    After a trip to the genius bar, I found how to solve this problem, at least for me:
    0) Plug in iPhone
    1) Start iCal
    2) Export all calendars (File -> Export)
    3) Quit iCal
    4) Delete all calendars from ~/Library/Calendars
    5) Start iCal
    6) Import all exported calendars
    7) Start iTunes, configure syncing to overwrite calendars on phone
    8) Sync iPhone

  • Groups created with dscl not showing in WGM?

    When creating a group "testGroup1" via dscl as follows ...
          Dscl -udiradmin /LDAPv3/mac-mini.local -create /Groups/testGroup1
    The group shows up when running ...
          Dscl -udiradmin /LDAPv3/mac-mini.local -list /Groups
    However, in Workgroup Manager the new created group"testGroup1" does not exist.
    Is there a way to determine where exactly the newly created Group is located?
    I did notice that the Workgroup Manager directory location is /LDAPv3/127.0.0.1.
    Does the 127.0.0.1 have something to do with it?
    Also, if I try to run the following ...
          Dscl -udiradmin /LDAPv3/127.0.0.1 -list /Groups
    I get an error saying "Data source(/LDAPv3/127.0.0.1) is not valid.
    I know it's there because it shows when I run a different tool called Ldapmanager.
    But for some reason it's not showing in Workgroup Manager.
    I was wondering if there is some attribute (or something like that) that must be set when creating the group before it will show in Workgroup Manager.
    Or maybe the server needs to be rebooted before they show? I wouldn't think that would be necessary, unless the users are being loaded when Workgroup Manager loads.
    Any help would be greatly appreciated.
    Thanks,
    Zeek

    Hi David
    There is a configuration that needs to setup to turn on outbound delivery document number update in MD04.
    This means if there is an STO in MD04 which is converted into outbound delivery, MD04 should now show outbound delivery number instead of an STO
    Follow this path and set up the document type of your outbound delivery in it
    Logistics execution -> Shipping -> Basic SHipping Functions -> Availability Check and transfer of requirements -> transfer of requirements -> Determination of Requirement Types using transaction

  • Created By and Created Date fields not showing up on Custom List form webpart

    Hi,
    I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
    <td width ="400px" valign= "top" class="ms-formbody">
    <xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
    </td>
    However these fields are not showing/populating data on the form ?? Any inputs ???
    Regards

    Hi,
    I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
    Hope it can help you.
    Xue-Mei Chang

  • OBIEE : Newly created rpd file not showing in the online mode in Admin tool

    Hi,
    I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
    1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
    a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
    b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
    c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
    d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
    But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
    2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
    Thanks
    Sanjay

    Dear Muram,
    Is did not work.
    1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
    2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
    Thanks
    Sanjay

  • Problem with newly created CM Repository NOT showing in Repositories Link

    I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows).  Here is what I have done so far...
    1.  Created a Windows file share
    2.  Configured a new CM Respository Manager (Persistence Mode FSDB)
    I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
    It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
    I restarted the service and still no luck...
    How do I troubleshoot this???  I am not sure where to begin.  Please be very detailed as this stuff is new to me.
    Thanks,
    Tom

    I tried that and still no luck.  Here is the interesting thing:
    - If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
    - If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
          "Startup Error: could not create directory:
    172.xx.x.xx\folders\Root\Versions\versions"
          My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
          The IP address is correct but where is the rest of this path coming from???
    - If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
          "Startup Error: folder
    172.xx.x.xx\folders\Root does not exist"
          My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
          The folder does actually exist.
    So confused...

  • Newly created layout profile not showing up in Select Profile window

    Dear experts,
    Background information - NetWeaver 7.0 SP15
    I'm learning customizing KM layout and have created a new layout profile, which is based upon a layout set with a HTML Collection Renderer. However, when I tried to test it by assigning it to a subfolder that I created in BIUserhome folder, I can't find the new profile listed in the Select Profile window. It shows up in selection list, though, if I try to set default layout profile. Can anybody be so kind to enlighten me on this? Would I need to restart the instance in order to see the new profile?
    Thank you very much in advance!
    Hsiao

    Hi Patricio,
    Thank you for your reply. My post did not elicit any response until now.
    As I could not have the layout profile coming up, I next tried the HTML Collection Renderer with layout sets. When I tried preview a path with the layout set, the layout set was not used as expected due to some error. Instead, the default layout set took over. I have a follow-up post that describes the issue (https://www.sdn.sap.com/irj/sdn/thread?messageID=804745) in case you may have an idea about the cause.
    Later these issues kind of went away for reasons I'm not aware of. I haven't gone back to set up another profile again yet. But newly-created layout sets are showing up in the dropdown now.
    Thank you for your other advice on using layout sets and layout profiles. I appreciate your input.
    Regards
    Hsiao

  • Create AAC version not showing in Library

    I have converted many files to AAC but they are not showing up in my library.  Besides dragging and dropping ONE at a time from the file itself, how do I get them to show in the library?  iTunes 10.5.1

    jonathanfromyakima wrote:
    Solved my own problem.  Delete the file in iTunes and it is automatically replaced by the AAC.
    That should not happen.
    Likely you were were sorting in some way and simply did not see the new AAC files.
    What did you convert these files from?
    And why?

  • Contract in SRM not Transferred to ERP

    Hi All;
    We are using SRM 7 classic scenarion
    I created contract in SRM then released it but it did get transferred to the backend.
    I checked SMQ1 and found "Transaction recorded"
    I checked also in BBP_PD and found "Distribution incorrect"
    It was working fine before.
    Please advise what to do.
    Thanks

    Thanks for your replies;
    We are using  IDOC technology , I used to check in WE05 BLAORD if there is any erro. but now i am not finding any IDOC in WE05, BD87.
    I checked in SLG1 an found "Error
    Error: Recipient not found
    The error ocurred by processing event RELEASED_NEWLY with GUID 76C5A64DE6B03816E10000000A010E29 and object_id= 4605000167
    What this error means?
    Our production system has been copied recently to as created QA system. In SRM QA, i copied and existing contract, which got transferred to ERP sometime back  with the same vendor but still it did not get transferred and i got the above error.
    Your help is highly appreciated.

  • Document created on iPad not showing up on Mac

    Hey guys,
    I'm sure this is simple enough, but I've searched to no avail. My mac mini is running 10.8.2 with iWork. I also have the iWork suite on my iPad. I've got icloud set up on all of my devices yet documents created on my iPad don't show up in the Pages application. If I create a document on my mac it does show up on the ios version of Pages. However, the documents created from my ipad do show up on icloud.com Is this a matter of me misunderstanding the way iCloud works or am I missing something more fundamental.
    Any and all help is always appreciated.

    Yes.  HealthKit is an iPhone and iPod only App. Apple did not make it available on iPads.
    Apple wrote:
    Health is available on iPhone 4s or later and iPod touch (5th generation).
    https://www.apple.com/ios/whats-new/health/
    https://www.apple.com/ios/whats-new/health/

  • Skin control in swf file created from indesign not showing online

    Hi,
    I used indesign cs5.5 interactive to create a swf file with embeded video and skin control.  When I view the video on my pc the video and skin control works but when I uploaded both the swf file and the skin control file  online to my client's server the skin control doesn't show. I suspect it has something to do with the path, is there somewhere I can specify the path to where the skin control is loaded online?
    Thanks.
    Natennove

    gp2011 wrote:
    The file does not open and asks whcih programI would like to open with when clicking the file.
    Which file - the .swf or the .exe file?
    If the .swf, you need to create a file association to the projector.

  • Albums created on mac not showing on iphone or ipad

    I created an album on my mac photo app.  How do I get this album to appear on my iphone and ipad? Upload to my photo stream and icloud photo library are active on all of my devices.

    Currently both are active. I don't want to have all of my photos on the icloud.  So should I only be using "icloud photo sharing"?
    I created an album on my iphone and this album shows up on my ipad and macbook pro.  However, I created another album on my macbook and this new album doesn't show up on either my iphone or ipad.
    These albums are not shared albums...they are only albums for me. Isn't "icloud photo sharing" different from the albums I speaking about?  My understandind is "icloud photo sharing" is for sharing my albums with friends and family.
    Thanks for your help

  • Newly created task does NOT show up at SOLMAN project

    We have CHARM configured.
    However, the newly created task cannot be seen at SOLAMN's project. The existing tasks showed without issues.
    What could be the reason?  Thanks!!

    Hi Christy,
    Please refer to the spro configuration at following path:
    Scenario specific setting --> change request management -->extended config --> schedule manager
    Also refer to SAP note 927124.
    Hope this helps!
    Thanks & Regards,
    Kriti Bhalla

  • Website created in Dreamweaver not showing up after upload to server

    Hi everyone.
    I have created a website in Dreamweaver CS4 which views beautifully in test mode, but when I upload it to my server, all I get is an index directory of all the pages!
    I've tried renaming my index.html page as index.htm, but nothing changed.
    Also, if I try clicking each of the pages separately, they show up without the 35 px padding at top that I specified on all my template pages!  On top of that, not all of the links work.
    Any suggestions???
    B.

    UPDATE
    Hello again.
    Okay, I changed all of my html files, uploaded the site and found it was still glitchy.  Long story short: I realized that I also saved many image files using some capitals.  For example: img_Car.jpg.  So now I'm going back and changing everything!
    Quick question: I created my pages using sliced Photoshop layers, Save for Web and Devices>Save Html and images.  So basically, all of my Dreamweaver pages have loaded the image files using capitals.
    Other than going through each template and tweaking the code, is there a faster way that I could update the Dreamweaver pages to recognize that the relabelled images in my root folder?
    B.

  • "Create Comment Summary" not showing in Pro 10.1.7?? How can I print document and comments with connector lines on single page?

    Adobe's instructions for Acrobat X Pro say that to print the document with connector lines on the same page, I should go from the menu to "Print With Comments Summary." I'm using version 10.1.7 and that option doesn't show up. My menu bar looks like this:
    and my print dialog box looks like this:
    And if I go to Commenting under Preferences I get this:
    I don't see any of the comment printing options Adobe refers to in their instructions. Am I looking in the wrong place for the option to print comments on the same page as the document? Or is there some reason this is not available?

    Hey Dan,
    With this call:
    DAQmxErrChk ( DAQmxCreateDOChan( taskhandle, "Dev1/PFI0:7","", DAQmx_Val_ChanForAllLines ) );
    You're trying to write to the PFI lines, which are part of port 1. Only the 8 lines on port 0 "Dev1/port0" support clocked/correlated DIO, port 1 only supports static/SW timed DIO (which is what you are using) and counter timer opperations. To do buffered output, check out the Cont Write Dig Port-Ext Clk shipping example at:
    C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Digital\Generate Values\Cont Write Dig Port-Ext Clk
    when you use this, you'll need to specify an external clock - M-Series DIO does not have its own timing engine so it has to get its clock signal from somewhere else. Most just use an onboard counter to generate a clocking signal, so the Dig-Pulse Train Cont example under counters can be combined with this.
    Most of this is covered in the M-Series user manual, though I realize its not exactly lite reading
    Hope this gets you started,
    Andrew S
    Message Edited by stilly32 on 03-26-2008 05:28 PM
    Getting Started with NI-DAQmx
    Measurement Fundamentals

Maybe you are looking for