Groupwise Mobile Issue - multiple SOAP Ports

Hi All,
I'm having an issue with Groupwise Mobile.
I've got multiple POAs hosted on the same server (using different ports), and GMS can only access one of them. The one that it can access is using the standard 7191 SOAP port.
Is there a trick to get mail to pass across another port? Users can authenticate, but synchronization doesn't work.
Thanks,
Matt

Originally Posted by mikebell90
There used to be a known issue with soap that if you had multiple poas
on the same ip, you could only access one
It seems to be working now. But I'm not sure how I fixed it.
To complicate things, I think I was suffering from two separate issues that presented themselves as one problem.
One of the changes I made was to install GWM as a trusted app, rather than using user based authentication. This seemed to help GWM access POAs with SOAP ports other than 7191.
The other "issue" I had seemed to "heal" itself. The user account I was using to troubleshoot this showed up with the following message in it's inbox:
Syncing resumed - password resupplied
Your password was resupplied, and Intellisync Mobile Suite is now syncing normally again
...so I'm assuming that GWM was caching bad authentication data. I just couldn't seem to get this data to flush out, even after deleting and re-adding the user in GWM, cycling services, and rebooting servers.

Similar Messages

GroupWise Mobile Server Issue

Recently our GroupWise Mobile server crashed. It was running on a virtualized Windows 2003 server. In trying to get it rebuilt and functional I have came across 2 issues.
1. When asked to provide (during reinstalling of Intellisync Mobile suite) GroupWise server address to be used along with port 7191 the username and password are returned saying unable to connect. The thing here is that I can use that same username/pw on GroupWise itself and successfully log into e-mail.
2. When I try and access http://10.3.2.6:7191 or http://mail.usd376.com:7191 I get the following error message in my browser.
HTTP/1.1 200 Date: Mon, 25 Oct 2010 10:59:42 GMT Server: NetWare GroupWise POA 8.0.1 Content-Type: text/xml; charset=utf-8 Content-Length: 268 Pragma: no-cache 59905Bad parameter passed to a NCSP function
Suggestions? Thanks in advance!

I'm a little unclear of what you are saying.
To access the SOAP part of the POA, the URL would be:
http://10.3.2.6:7191/soap
Are you saying that is not the case or are you stripping
off the /soap part?
What request are you trying to execute?
I would expect a SOAPAction header as well.
Also is SSL enabled and you are trying to access it without
SSL?
Preston
>>> On Monday, October 25, 2010 at 10:36 AM,
dmantz<[email protected]>
wrote:
> Recently our GroupWise Mobile server crashed. It was running on a
> virtualized Windows 2003 server. In trying to get it rebuilt and
> functional I have came across 2 issues.
>
> 1. When asked to provide (during reinstalling of Intellisync Mobile
> suite) GroupWise server address to be used along with port 7191 the
> username and password are returned saying unable to connect. The thing
> here is that I can use that same username/pw on GroupWise itself and
> successfully log into e‑mail.
>
> 2. When I try and access http://10.3.2.6:7191 or
> http://mail.usd376.com:7191 I get the following error message in my
> browser.
> HTTP/1.1 200 Date: Mon, 25 Oct 2010 10:59:42 GMT Server: NetWare
> GroupWise POA 8.0.1 Content‑Type: text/xml; charset=utf‑8
> Content‑Length: 268 Pragma: no‑cache 59905Bad parameter passed to a
NCSP
> function
>
> Suggestions? Thanks in advance!

GroupWise Mobile 2.02 Ports?

I have just started up a GroupWise Mobile 2.02 server and was wondering
how do I allow users from the internet to link in? I was thinking Static
NAT but not sure on the filter setup.
Just wondering,
[email protected]

Massimo Rosen wrote:
> Craig,
>
> Craig Johnson wrote:
>>
>> In article <Ivj6j.6685$[email protected]>, Kenneth Heinz
>> wrote:
>> > I have just started up a GroupWise Mobile 2.02 server and was wondering
>> > how do I allow users from the internet to link in? I was thinking
>> > Static NAT but not sure on the filter setup.
>> >
>> You would need static NAT for sure.
>
> Not necessarily. I use generic TCP proxies, and they work just fine.
>
>> What appliances are the users using to communicate to the mobile server?
>
> PDAs and Smartphones. And the ports GMS needs are well documented. ;-)
>
> CU,
generic proxies have worked fine here also.

SOAP ports with cluster setup and BES?

Okay, our cluster setup in NetWare (yes, still NetWare cluster) with Groupwise 7.0.3 we have unique TCP ports for the client/server (like 1677-something). Even though each clustered node has a unique IP and is running in protected memory.
That being said:
We'd like to enable SOAP for use with BES and GWArchive.
The issue/question:
Do either of these figure out the SOAP port for each PO? Or must the SOAP port be the same among all the PO's for BES to work properly?
If the SOAP port must be the same (I'm not the BES admin, so I don't know if the setup lets you specify just one port or if you can defined them per PO), can you run multiple POA on the same physical host (keep in mind, this is clustered with protected memory) and use the same TCP port # for SOAP?

kjhurni wrote:
> Okay, our cluster setup in NetWare (yes, still NetWare cluster) with
> Groupwise 7.0.3 we have unique TCP ports for the client/server (like
> 1677-something). Even though each clustered node has a unique IP and is
> running in protected memory.
>
> That being said:
>
> We'd like to enable SOAP for use with BES and GWArchive.
>
> The issue/question:
>
> Do either of these figure out the SOAP port for each PO? Or must the
> SOAP port be the same among all the PO's for BES to work properly?
>
> If the SOAP port must be the same (I'm not the BES admin, so I don't
> know if the setup lets you specify just one port or if you can defined
> them per PO), can you run multiple POA on the same physical host (keep
> in mind, this is clustered with protected memory) and use the same TCP
> port # for SOAP?
>
>
I haven't used BES, but in general there's no auto-discover method for
SOAP ports, so yes they'd probably have to be the same port.

GroupWise Mobile Server

We will shortly be installing GroupWise Mobile Server onto our mail system. Has anyone had experience of connecting an iPhone to Mobile Server?
Thanks
Tony

I'm a little unclear of what you are saying.
To access the SOAP part of the POA, the URL would be:
http://10.3.2.6:7191/soap
Are you saying that is not the case or are you stripping
off the /soap part?
What request are you trying to execute?
I would expect a SOAPAction header as well.
Also is SSL enabled and you are trying to access it without
SSL?
Preston
>>> On Monday, October 25, 2010 at 10:36 AM,
dmantz<[email protected]>
wrote:
> Recently our GroupWise Mobile server crashed. It was running on a
> virtualized Windows 2003 server. In trying to get it rebuilt and
> functional I have came across 2 issues.
>
> 1. When asked to provide (during reinstalling of Intellisync Mobile
> suite) GroupWise server address to be used along with port 7191 the
> username and password are returned saying unable to connect. The thing
> here is that I can use that same username/pw on GroupWise itself and
> successfully log into e‑mail.
>
> 2. When I try and access http://10.3.2.6:7191 or
> http://mail.usd376.com:7191 I get the following error message in my
> browser.
> HTTP/1.1 200 Date: Mon, 25 Oct 2010 10:59:42 GMT Server: NetWare
> GroupWise POA 8.0.1 Content‑Type: text/xml; charset=utf‑8
> Content‑Length: 268 Pragma: no‑cache 59905Bad parameter passed to a
NCSP
> function
>
> Suggestions? Thanks in advance!

GroupWise Mobility Service 2.0 now available

We're pleased to announce that Novell GroupWise Mobility Service 2.0 is
now available. This release, which replaces the former Novell Data
Synchronizer Mobility Pack, includes the following enhancements:
Performance and scalability improvements, and support for more than
1,000 devices per server
ActiveSync 12.1 protocol support
Mobility Service Monitoring Dashboard, showing real-time stats for the
overall system, for each sync agent, and for particular users and
mobile devices
Task synchronization
New address book administration options
Support for the upcoming version of GroupWise, releasing as GroupWise
2014 and code-named Windermere, including Active Directory support
through GroupWise provisioning
Support for the latest mobile device platforms like iOS7, Android 4.3,
Windows 8 and BlackBerry 10
Support for SUSE Linux Enterprise Server 11 SP3
AutoDiscover support for iOS and Windows 8 devices
And much more
Novell GroupWise and Novell Open Workgroup Suite customers with current
maintenance are entitled to this release which is available for
download here.
https://download.novell.com/Download...d=xWnnbrV7Xic~
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Joseph,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Soap port already in use (856B) GW 703

Anyone run into this problem where if you have multiple POA's on single server and if you enable SOAP to use default port of 7191 on both POA's, one or other POA complains about "soap port already in use (856B)" and shuts down that POA.
BES doesn't seem to have option for add'l port number assignments? Or is there a workaround to allow both POA's to listen on same port number?
Any help is greatly appreciated!
Thanks

On Tue, 22 Sep 2009 13:36:02 +0000, josejimenez wrote:
> Anyone run into this problem where if you have multiple POA's on single
> server and if you enable SOAP to use default port of 7191 on both POA's,
> one or other POA complains about "soap port already in use (856B)" and
> shuts down that POA.
Makes sense. You can't run multiple services on the same server using
the same IP address and port.
> Or
> is there a workaround to allow both POA's to listen on same port number?
Use multiple IP addresses and bind each POA to a specific IP.
Joe Marton
Novell Knowledge Partner
SUSE Linux Enterprise 11 is ready for action.

BB Q10 empty message through Groupwise Mobility Service

Hello forum members!
We have an issue with an smartphone BlackBerry Q10 (OS version 10.1.0.4181) using Groupwise Mobility Service version 2.0.1 revision 53, installed on Suse Linux Enterprise Server 11 patchlevel 3.
When the user replies to an external e-mail, the recipient gets an e-mail with the message body empty.
This does not happen when replying to internal users. In that case the text message arrives without problem.
Any help will by appreciated.
Thanks in advance,
Paulo

It's a Yahoo problem that's being worked on. No idea when they'll fix it. Yahoo has had lots of problems with their email, contacts and calendar platform lately.

HT1688 Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Hello csmithhisler,
Congratulations on your new iPhone 5c! I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes. I recommend following the steps in this article to troubleshoot the issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Multiple SOAP Actions in SOAP Receiver - PI 7.1

Is it possible to handle multiple SOAP Actions in SOAP Receiver Communication Channel in PI 7.1 ???
Plz help ....
Neena

How can I handle two SOAP operations without BPM ?
In first Action I will get an ID,
WIth that ID I need to perform another Action.
Any help ???

Multiple SOAP fault support in PI?

Hi Guys,
We have a webservice that has multiple SOAP faults as part of the WSDL. Normally a sync WS will have a request, a response and a fault. My question is does PI support multiple faults?
If i look at the SI, it lets me add multiple fault messages. Even in operation mapping, I get the option of doing the multiple mappings for multiple faults. But when I test, it throws up an error mentioning that the mapping does not exist in the cache. If I remove the multiple faults in SI (only provide one fault) and hence the same in OM, it works perfectly fine. But PI doesn't seem to like multiple faults in SI and OM and hence mess things up during runtime.
So does PI really support multiple faults? Can it handle multiple faults being triggered from the target and route it to the source application?

Ok, we analyzed this further and here is one answer:
Synchronous service operations can absolutely handle more than one fault message. We checked this with ABAP-Proxy to ABAP-Proxy and also ABAP-Proxy to SOAP Adapter.
The problem we had before was due to a missing namespace information: in the response the namespace qualifier of the top level tag of the individual fault in the SOAP Envelope was not set.
Here is my hypotheses about what happens: If there are more than one fault messages mapped in an operation mapping, the system must be able to find the correct one. To do that, not only the fault message tag name, but also its namespace must be set precisely in the response message. Otherwise the massage processing stops and a u2018missing mapping programu2019 is reported. Since the correct message mapping corresponding to the actual fault received could not be identified, in the error reported in the message log the system refers to the next best thing it has at that point which is the ID of the operation mapping. However, that is a bit misleading, since the operation mapping itself was found and there is nothing wrong with it.
Hope that helps
Eberhard

Message Split using BPM for Multiple SOAP Receivers

hi,
I have a scenario where in i have to split the message coming from IDOC(SOURCE) to multiple SOAP(TARGET) receivers through BPM
I took a single file as a scenario and tested it. It worked fine.
I am using only a single output interface.
I have followed this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
but this blog has 2 output interfaces whereas in my case i just only one output interface that i want to route to multiple receivers based on the value in the PARVW in the IDOC.
Thanks,
Tirumal

hi ,
this is done using CONDITIONAL RECEIVER DETERMIANTION.
While doing your reciver determiantion, you can specify multiple receivers and also specify the condition on which the receiver is to be choosen.
Also, just check the last path of this blog for the same,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Regards,
Bhavesh

How to submit data from multiple Input Ports in single SUBMIT button click

Hi,
I am in SPS8.
What exactly steps I need to perform to submit data from multiple Input Ports.
I couldn't able to submit One input Form and one Input Table to BAPI data service in single SUBMIT button click.
I debugged the VC application in SPS8.
While debugging, I found that when I click the SUBMIT button in the Input Form, Only data in that Input
form are being passed to the BAPI, But not the Table Form data.
If I click on the SUBMIT button in another Input Table, Only data from that table is being passed to the BAPI, but not the Input form data.
Essentially I need to submit both of them in one SUBMIT button.
Thanks,
Ramakrishna

Ramakrishna,
From the word document that you sent to me the steps you are missing to map the appropriate information into the BAPI is first you are not mapping all data rows into the table input port. To do this double click on the input table view and change your selection mode from single to multiple. Then when you click on your link between the BAPI and your input table you will see a new option appears under data mapping "Mapping Scope" select All Data Rows.
That's the first part of the problem to get the BAPI to recognize both the inputs coming from the form and the table eliminate the submit button from the form. Drag and drop a link from the output port of the table view to the Input port of the BAPI. Double click on the link between the BAPI and the table view and open the expressions editor for the two fields:
1/ Automatic Source
2/ SKIP_ITEMS_WITH_ERROR
On the hierarchical folder structure on the right expand expand the Data Fields node to find the fields from the form and map them accordingly.
Now when you hit the submit button on your table it should pass the BAPI all the parameters from both the form and the table.
Hope this helps,
Cheers,
Scott

Multiple Input ports - Single Form

Hi,
I have a RFC which has multiple input ports. How do i use a single form to provide data to all the input ports.
Regards
Bharathwaj

Hi,
you can create the single form direct, if you pull a line out of the RFC, then the form must be created with the fields. If not, then you have to create it manually and map the fields with the input port.
Best Regards,
Marcel

Sharepoint 2013 online mobile issue.

Dear all,
When I try to fill out a form in mobile view on the iphone or android phone, the person or group column doesn't work at all.
And when I try to approve a workflow I created with 2010 workflow, the page is just blank.
basically everything is so broken under mobile view, but works under pc view on the phone.
Anyone has any quick fix to this? I really need the mobile view to work properly. I know I can disable the mobile view, but I have to keep it. Thanks.
Timothy Liu

Hi,
According to your post, my understanding is that you had Sharepoint 2013 online mobile issues.
Please make sure you configure the mobile view correctly. You can refer to:
Configure a SharePoint site for mobile devices - SharePoint Online for enterprises
Use a mobile device to work with SharePoint Online sites
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Thanks,
Jason
Jason Guo
TechNet Community Support

Groupwise Mobile Issue - multiple SOAP Ports

Similar Messages

Maybe you are looking for