GTi4600VTD (PCI Mode) help!

I'm running a NVidia2 chipset on a Asus A7N8X in WinXPPro and device manager shows my video card as PCI Interrupt 19 on Bus3,device 0, function 0,. My VGA driver is Nvidia 4.1.0.9 and the card BIOS is 4.25.0025.
I cannot find any reference to AGP4X only to AGP (PCI Mode) under properties of card in Device Manager.
I cannot find way to update BIOS because Live Update2 will not remove from OS and new version will not complete install, probably because of old version. This probably came about due to pathetic speed on MSI Server, which dumped me in middle of update. Can anyone tell me what card should report in Device Manager, and if there is a Uninstall tool to clean the Registry of corrupted MSI software. Any help is appreciated.

Quote
Originally posted by wonkanoby
sounds like your nforce drivers not gone in properley
the gart driver,try another driver set nvidias
Thanks for the tip wonkanoby, I will give that a try. I have had nothing but nasting things happen with MSI driver set. The last was trying to use Live Update2 to flash video BIOS from 4.25.0025 to the new 5.25.00.27.32 but the program reports that there is no newer version even when it is displayed in the list of BIOS updates. Go figure! How do you do a manual flash without the fear of a crappy server crash as what happened when updating the update2 program. It just stalled. I choose to remove files downloaded and of coarse it did not do that, so the next update couldn't write the file, it said it was in use. My list of things wrong with the MSI software is to long to post, that's why I'm just using the Nvidia detonator driver set.

Similar Messages

HELP Plz...AGP running in PCI Mode

HELP PLEASE........
i just purchased a MSI Ti4200-TD8X64 (MS-8894) video card. when i run the utility, it states i am running in PCI mode. Here is my computer info;
AMD Duron 1 Gig
MSI Ti4200-TD8X64 (MS-8894) 40.72 win9x_WHQL drivers
ASUS A7V-E Motherboard
256 PC 133 ram
Maxtor 40 gig in DMA mode
CDRW-DVD
Direct X 9
WIN ME
BIOS settings are AGPX4
FAST WRITE enabled

get updated 4 in 1 drivers for it

FX5200 TD128 is a AGP in PCI MODE? I need help

I just got this card and i went to check if everything is ok and then it says its plugged into the AGP slot but in PCI mode.How do you fix this

load motherboards vga drivers
whats the set up any way

Fx 5900 U with agp 8x runs in pci mode

I just bought a msi fx9500 ultra card with 8x agp but the configuration box shows it as a agp card running in pci mode, when i run dxdiag i cant enable agp.
i want the card to run in agp 8x mode, does someone knows a solution for this problem please help i am sure my mainboard supports 8x agp.
my harware congig looks like this:
Intel 3.00 ghz
1024 mb ddr kingston memory
875 p neo lsr mainboard from msi
120 gb maxtor harddisk
and the msi geforce fx 5900 ultra vtd256 with 256 mb ddr

NewGamer you are running a system that locks you out of alot of the BIOS settings. An Intel board would work real good. It will give you most stable platform to build on and compatiblity second to none. only problem I have had with my new system was all ths crap software that came with the MSI video card. just make sure that after you install the operating system that u install the Chipset drivers first thing. by doing this it updates the INF files and things will be configured right. In the BIOS always have the plug and play OS set to NO that way windows will get it's instuctions from the system board for configuring things. and by the way my last system was a P3 933MHz with 512 MBs ram and a MX 440 card it played BF1942 fine, nice and smooth. I just lost alot of one on one fights the speed was not there.

Ti4200 x8 problem(only pci mode)

hi,
i have a msi 845e max motherboard and a msi geforce ti4200 with AGPx8.
my amy bios version is 5.70 and i use nvidia 41.09 drivers for the card.
when i go to display progerties and click on the settings tab and then "advanced" and then the "geforce4 ti 4200" tab, it says in the "bus type" :AGP(PCI mode).
why is the card in pci mode?
furthermore, in the display properties, in the msi information tab, it says bus type:AGP and in AGP information it says AGP revision no. 2.0 but it doesn't let me mark "AGP traffic enable" or mark any of the AGP speeds (1x,2x,4x,8x).
it lets me mark "sba enable" but i dont know what is it.
ive searched everywhere in the bios to change it but couldn't find nothing.
i knoe that i should have an "agp enable" option in the bios but it isnt there.
can you help me?

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=313%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6566E
sure its in the inf driver

Fx 5700 Agp (pci Mode)

ok i have a :
P4 2.8 Ghz HT
512 MB DDR 400
Compaq Monitor
DVD/CD-RW
Asus P4800 Deluxe
Nvidia GeForce FX 5700 256MB (Made by MSI)
80GB Serial ATA Hard-Drive
DirectX 9.0b
SoundMAX Audio
53.03 Nvidia Drivers
I think the somewhat latest Asus drivers
XP home
ok heres 2 problems i would like to fix
1. in display properties, then the msi info tab, i cannot check or uncheck any of the boxes (AGP traffic enable, 8x, 4x, 2x, SBA enable, ect.). WHY??
2.in the nview tab, GeForce FX 5700, it says under adapter information that my "bus" is AGP (pci mode). I DONT WANT IT IN PCI MODE, but I cant seem to change it, not -one- option in BIOS lets me change ANYTHING about my AGP, and Ive spent a long time looking elsewhere.
I have sent emails to msi and my manufacturer (last tuesday, but no response yet (atari took 2 months to respond to an unreal 2 question)
please help, im really frustrated.
peace, Jon

Quote
My concern was that he couldn't select an AGP setting in the driver at all (according to his post) - this suggests that the GART driver is not loaded properly.
This is the MSI's drivers Information tab from how I understood his initial post, those are static check boxes and they are misleading, MSI made a boo boo just like calling the DOT monitor "Winsys.exe" that shows up in some anti trojan software as a worm...LOL, after all it is called an information tab.
Now the info pages such as "AGP settings" in the actual Detonator/Forceware control panel that are enabled with coolbits installed cannot be changed in a 8x board VGA combination, I've even tried entering the BIOS and turning it down to 4X, the system comes up showig 4x and then 1X in the OS column...freakin weird.
Now this bit about showing 4X in the OS column is because the motherboard is native 4x or the card is, and I've seen it on Intel boards too, including VIA and nforce. For instance check this out http://www.nforcershq.com/forum/viewtopic.php?t=42361&postdays=0&postorder=asc&start=0
I'm with you on the BIOS subject..I wasn't scolding you or anything Sometimes things can be misinterpreted, asn sorry if I came off that way.
Oh BTW in all this I have reloaded the GART's and even pulled all chipset drivers and started from scratch to see if there was any difference. Give that link a read anyhoo
Theres more but I am really tired now.

TI4400 in PCI mode

Just put together a new system with a SOYO P4X400 motherboard and I can't get my TI 4400 card into AGP mode. AGP is turned on in the mobo bios and drivers are loaded. Under display settings it shows AGP (PCI Mode). When I go into setting for the video card I can't check AGP setting ie 4x or 2x. Also when I go into adapter properties it shows the location as PCI bus 1 but I am in the AGP slot. What am I doing wrong or missing? Any help would be greatly appreciated.

sounds motherboard related try asking here as welllink

Geforce FX with agp speed 0.0 (PCI mode)

Someone!! Help!!
Here is a brief description of the problem. I have a geforce FX and MSI K7N2G mainboard and I installed asus nvidia detonators. Once I uninstalled them (if you have a asus card I strongly reccomend not instaling the drivers) and installed 100% pure nVidia drivers. The problem is when I go to the hardware or agp tab in Geforce FX controll panel thingy, it says AGP 0.0 (Pci mode). I reinstalled nForce drivers, nothing helps.
Someone!! Help!!
?( ;( ;( ?(

Have you tried reinstalling the exact same drivers that it will not let you uninstall? If the reinstall is successful you should be able to uninstall them after you reboot. If you still cannot uninstall them after a reinstall you may have to reinstall the OS.

PowerPC G5 iMac only booting up in Safe-mode - Help!

In July of 2005, I purchased my PowerPC G5 20" iMac, 2.0GHz, +260 GB harddrive and 2 GB of DDR SDRAM. It has been running so great that I even upgraded to Leopard OS 10.5.6 in June of 2011.
However in Nov. 2011, the computer would freeze upon start-up, and I would have to hold the power button to shut it down. After waiting a minute I would start it up and the OS came up ok. But each week I had to shut it down and restart a few times before it booted up ok. I ran the OS Disk Utility to repair permissions and it did not seem to make a difference. I also ran MacTuneUp 3.6.0 (purchased it in 2010), and there was also no difference.
Now I can ONLY boot into Safe-mode - Help!!!

Discovered something new!
I left my iPhone connected to the iMac, and when starting up the computer the iPhone started charging. When the screen froze (light blue shade, not black screen), the iPhone stopped charging. (no charge?).
BTW....my mouse always moves when in frozen state.
I also tried starting up (c-key) using OS 10.5.6 CD and computer also froze in light-blue screen. The computer tried to access the CD but then gave up. After leaving the computer for awhile the screen power saving mode was on (screen was black). When I moved the mouse the screen changed from black to light-blue screen. Boot CD did not work. No keyboard commands work. Only holding the power button will shut down the computer.
Help!!

Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

Stuck in PCI mode

I wasn't sure if this was answered somewhere else, If it was I couldn't find it , but when I run certain games I get a message stating that I'm running in PCI mode, I 'm not exactly sure how it got set like that but it is and I can't figure out how to get it out of that .
WinXP pro
P4 2.53
512mb PC2700 ddr
GeForce 4 Ti4600
I have a screen shot if needed

Quote
Originally posted by Deathstalker
C4b00s3,
Progress is slow but we are starting to get somewhere. Most CompUSA Power Supplies are POS. Do get us the amps for the 3.3v, 5v, and 12v RAILs. Also get the Max Combined Wattage of the 3.3v + 5v RAILs.
Then please list those IRQs.
Take Care,
Richard
P.S. Only a few more teeth to pull.
ok am I an electrical engineer now what the hell is a rail ?
anyway there are no IRQ conflicts and my video card is plugged into the agp slot
it says (PCI) 16

5th Gen Ipod classic is stuck in a Restore loop. Every time I restore on itunes the ipod reboots back into restore mode. help!

5th Gen Ipod classic is stuck in a Restore loop. Every time I restore on itunes the ipod reboots back into restore mode. help!

Hi clarity,
Welcome to Apple Support Communities.
You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Best,
Jeremy

PCI Mode

Hi Everyone,
I've seen several posts about TI 4200 cards running in PCI Mode, which mine is doing. When they say to reinstall the chipset drivers which one do you use? if using the LiveUpdate would I run Live Driver? A little confused on which option to choose.
Thanks!
Vance
845E Max
P4 2Ghz
256MB DDR SDRAM
Windows XP Home
Nvidia TI 4200 64MB

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=313%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6566E
all drivers on here,inc application accelorator and inf driver

Msi geforce ti4200vtd 64 (PCI MODE)???

specs:
athlon xp 1700+
msi k7n420 pro mobo
msi geforce ti4200 vtd 64 video
256 pc2100 ddr
Using either msi or nvidia drivers, I can't get this out of pci mode. Both card and mobo support 4x agp mode, but it only runs in pci mode. Using msi drivers, changing to agp seems possible, but any check in the white box just disappears. My 3dmark 2001se scores are about half what they were on a cheaper mobo using a 1gig duron. Yes, the cpu settings are fine and it's running at its normal speed of 1.47ghz. Nothing is overclocked.

jeez, you are quick....thanks
i had the msi drivers, and it wouldn't let me change to agp anything... I uninstalled them and went to the detonator drivers, and agp is disabled in the ti4200 properties under the agp settings,
I dont see a place to enable it, and the slide scale to choose rate (1x,2x,4x?) won't move either.

MSI TI4200 AGP (PCI mode)

I recently installed a MSI G4 TI4200 128MB AGP8X. It seems to be running fine, however, I noticed that in Display Properties, Adapter Information, it says the bus is "AGP (PCI Mode)". Also, under the Adapter "General" tab, it says the location is "PCI bus 1". This sounds like it is not fully using the AGP bus, correct? The motherboard is a ECS K7S5A, so I realize it would only be 4x AGP. Any thoughts?
Nothing OC'd
AMD XP 1800+
256 MB DDR 2100
ECS K7S5A mobo
MSI G4 TI4200 128MB AGP8X (model TD8X)
Sparkle 300w PS
IBM 40g Deskstar 7200 rpm
Win 2k Pro

Deathstalker,
"If you are using the nVidia Drivers,"
Do you mean the nVidia reference drivers? I am using the MSI drivers (latest v4107). On the GeForce4 Ti4200 tab under Adapter Information it says "Bus: AGP (PCI mode)". Also, I forgot to mention before that on the MIS Information tab under AGP Information, neither the "AGP Traffic Enable", "8X", "4X", "2X", or "1X" check boxes are checkmarked and I am unable to checkmark them. (SBA Enable is not checkmarked either, but I am not sure what that is.)
Thanks,
Mike

GTi4600VTD (PCI Mode) help!

Similar Messages

Maybe you are looking for