GTX 760 compatible with h8 1420t?

My hp is an h8 1420t. It came with a 600w power supply and an Nvidia GTX 660. I want to upgrade to an Asus GTX 760 or 760 ti when it comes out. Will the graphics card fit in the case and work with the motherboard and power supply or will it not?

Hi,
The following links show specs of both cards:
  http://www.geforce.com/hardware/desktop-gpus/gefor​ce-gtx-660/specifications
  http://www.geforce.com/hardware/desktop-gpus/gefor​ce-gtx-760/specifications
They are same size (width, lenght & height). You need more power and connectors for the 760 and 600W can do the job nicely.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Is the GeForce GTX 760 compatible with After Effects CC?

    Hi!
    The tech specs page doesn't have the 760 listed as a compatible Graphics Card, but will it still work.
    Wouldn't it be better then the other listed cards?
    Thanks,
    Joshua Northeast

    The GTX 760 and several other cards have been added to the list of cards that After Effects will use for GPU acceleration of the ray-traced 3D renderer in the After Effects CC (12.1) update, coming in October.
    See this page for details:
    http://adobe.ly/AE_CC_12dot1_details

  • Will  card nVidia geforce GTx 760 work with premiere pro?

    Will  card nVidia geforce GTx 760 work with premiere pro?

    Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Is MSI gtx 750ti compatible with HP pavilion 500-232el?

    Hi,
    I want to upgrade my graphic card.
    I'm looking for a MSI GTX 750ti.
    is this card compatible with HP pavilion 500-232el?
    Thanks in advance,
    Alessandro
    This question was solved.
    View Solution.

    Hi,
    Since your PC has a version 8 BIOS, then review the below post HP articles.
    HP Secure Boot Windows 8 Topics   Computer Does not Start After Installing a Video Card (Windows 8)
    BTW - most models of the NVIDIA GTX 750 graphics cards should work with the exception of those that require an auxillary PCI-E six (6) pin power connector.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Is GTX 970 compatible with any Adobe Software, specially Premiere and After Effects?

    Hey!
    I going to buy my first custom pc and people told me to buy the Asus GTX 970 because it´s really good.
    When i went to the Adobe requirements, they said that is not compatible with the software.
    Should i buy another graphic card? Because i don´t wanna buy something that will not work!
    Thanks.

    The GTX has not been tested by the Premiere Pro team so it is not 'officially supported'. That does not mean that the card won't work it just means we haven't had the opportunity to run test on it yet. With that said, I've heard very good things about the card.
    Perhaps others can share their experiances.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • K410 with gtx 760

    Hello
    I have had a lenovo k410 for 5 months now and am considering upgrading the stock GEforce gt 620 to a gtx 760 along with a necessary power supply upgrade(from the stock supply). Ive seen on the manual that the 760 is not compatible with the k410 but read that there is some way to bypass this issue. Has anyone done this and what type of power supply would you recommend for a gtx 760 that would work on the k410. Any help would be greatly appreciated 

    Using a free download of Windows 8.1 RTM, I installed on an empty disk, it created a GPT Boot partition with two boot loaders. After this 8.1 was installed, if I added the Zotac GTX 760, the machine was not able to boot to BIOS, but would eventually boot to window 8.1.
    The machine was sold to me with WIndows 7.
    I don't know whether I can configure the boot loader on the Win 8.1 disk to launch the Windows 7 on the original disk. or whether Windows 7 will recognise the graphics card.
    Good Luck to anyone else !

  • Is GeForce GTX 675MX compatible to MSI GT-70?

    Hello folks,
    Last year I bought my son a MSI GT70 when we traveled to Canada.
    Unfortunately, duo to a lightning bolt issue his computer is not working anymore. We went to the technnical assistance here in Brazil and they told us that the video card was burned out and needs to be replaced.
    It's been very hard to find the exactly same model (GeForce GTX 675M) so I found a very similar one (GeForce GTX 675MX).
    Is GeForce GTX 675MX compatible with his computer?
    Do you folks suggest any other video card?
    ps: I do not know what motherbord he has so i took a picture of his computer and I hope it helps.
    All on dropbox.com
    /s/fyi8kli1ftfwrxx/2014-10-24%2011.40.00.jpg?dl=0
    /s/6lt2ip2xwi7zmnd/2014-10-24%2011.39.52.jpg?dl=0#
    Thank you all.

    I'm a bit worried that even if you get a new gpu for the thing it still wont work. If the GPU died from a lightning bolt it's very likely that other components died too. Not to discredit the tech who actually looked at the device though. Now I don't have a lot of experience with laptops, but the 670m that comes with that laptop is PCIe 2.0 and so is the 675m. Again though, I don't have much experience with laptops so I don't know if both using the same bus means they will both work in the laptop. I don't know if the PCIe 2.0 bus support means they share a mobile PCIe connector or if it's just a way to compare the bus speeds with desktop computers. Calling MSI support or going to the above forum are your best choices.
    *EDIT* Though I will mention that the first image you posted has a sticker that says gtx 675m so I'm assuming it is compatible.

  • MSI H97 GAMING 3 Intel H97 With 2GB Asus GTX 760 DirectCU

    ust built my pc got it working with onboard grapics when i plug the dvi into the graphics card i get no display the HDD has a fresh install of windows 7 i haven't installed any drivers for the mobo or the GPU, im also using a fairly old VGA monitor and im using a VGA TO DVI connector.
    specs
    8GB (2x4GB) Corsair DDR3 Vengeance
    Intel Core i7 4770K Quad Core
    2GB Asus GTX 760 DirectCU II OC, 28 1
    MSI H97 GAMING 3 Intel H97 (Socket 1150) DDR3 ATX Motherboard
    This card has to be compatible with this board right? it can't be that issue?

    Quote from: Nichrome on 27-October-14, 23:23:26
    Hi,
    Yes both are compatible.
    What is your power supply?
    Also did you try any different cable for video between GPU and TV/monitor? Maybe try different monitor too.
    Hello ah, so the card and the MoBo are compatible? thats great!
    PSU is Corsair CX750M 750W ATX 80+ Bronze PC Power Supply
    also i will try a newer monitor that just has a DVI wire rather than using a converter

  • Is my system compatible with GTX 970?

    I have HP P7-1235 with MS 7778 (ver. 1.0) motherboard. I have recently purchased MSI GTX 970. When I put in the card and try to boot up the system, it freezes with Starting Windows sign on the display. From a research I have done it seems there might be a problem with my MOBO and/or BIOS version being compatible with the card. The BIOS version is AMI 7.07
    I am running Windows 7. 
    Could anybody tell me if there is a newer version of the BIOS I need and or any other solution so I can run the GPU?
    Or do I have to get a different GPU. Is so which one is high performance GPU compatible with my BIOS and MOBO?
    Thank you in advance for any help.

    Hi,
    Unless your PC has a version 8 BIOS then don't count on the NVIDIA GTX 970 working in your PC even with the correct power supply installed.
    Your PC has a version 7 BIOS.
    Either of the below MSI graphics cards should work with the 300 watt power supply in your PC.
    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • GTX 650 Video Card Incompatible with h8-1420t?

    I took delivery of an Envy h8-1420t a few weeks ago. It came with a Radeon HD 7670 graphics card. I would like to add a bit more horsepower in the graphics processing department, andI upgraded to a 575w Thermaltake Toughpower XT power supply accordingly. My new video card is an MSI GTX 650 (http://us.msi.com/product/vga/N650-MD1GD5-OC.html), and on paper is compatible with both the power supply and HP Formosa motherboard.
    Unfortunately, the card refuses to output video when I install it. I have verified that the card is working. Any ideas as to what the issue could be? I'm guessing it's some sort of motherboard incompatibility, but am wondering if anyone else has had similiar issues. The GTX 660 is optional equipment when ordering this rig, and if that works I don't see why this wouldn't.

    Is this the monitor?
    I take it both ends of the cable look like this.
    I apologize ahead of time for asking this, but I want to verify the basics.
    Was the 4-pin power connector on the motherboard connected to the power supply? It is located above the PCIe slot and next to the processor slot. This is to power the processor, so no video would be available if this was not connected.
    Honestly, the symptoms aren't lining up. I know the PC is not at fault as there are no restrictions in place.
    Both DVI ports (monitor and new video card) appear to be DVI-D, so analog/digital is not very likely.
    I take it the cable is known to be good as it worked with the stock video card.
    Are there any beep codes? You probably would have mentioned this had you heard any, but I want to be certain.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M

    Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M?
    I do not see this card listed on the Adobe products page http://kb2.adobe.com/cps/873/cpsid_87347.html but am hoping someone who is more computer savy at Adobe or Nvidia or somewhere else can advise me.
    I'm looking to purchase a laptop with the subject graphics card.
    Rob

    >Will CS5.5
    http://forums.adobe.com/community/premiere/premierepro_current
    See link in my answer yesterday... also...
    For a list of supported nVidia CUDA cards go to the FAQ
    First read http://forums.adobe.com/thread/773101
    PPro Video FAQ http://www.video2brain.com/en/products-118.htm
    http://forums.adobe.com/community/premiere/premierepro_current/cs5_faq_sheet
    Quadro cards compared http://forums.adobe.com/thread/910140

  • Is the IdeaCentre K450 compatible with the GTX 970?

    By comptabile I mean, of course, will the graphics card fit in the board? Specifically I have the K450, Machine type: 10120, Config number: 57323871.
    Or to make it simpler, I have this board: ( http://flash.newegg.com/Product/N82E16883266696?icid=SE_83-266-696 )
    Note that's not my exact PC, but the board seems to be exactly the one I have, only some differences (mine came with 12GB instead of 8GB RAM, for example, etc.)
    My main concern being the size of the GeForce GTX 970. The lenght shouldn't be an issue since there's plenty of space below the drive bays, but because it's dual width I'm concerned if the card will be in conflict with where the heat sink down there is located. Essentially if the card passes over it, that's fine, but I'm not sure if that heat sink will actually obstruct the card and not allow it to fit in place, That link I posted has images of the mother board and said heat sink. I intend to upgrade the PSU as well (due to the GPU's requirements), but I'm unsure if this card will even fit in there?

    Hey there Punk Phil,
    It sounds like you are wanting to know if the Universal Dock is compatible with your iPod. If you are referring to the iPod Touch 4th gen, then yes according to this article it is:
    Learn about Apple Universal Dock
    http://support.apple.com/kb/ht1380
    The Apple Universal Dock includes five Dock Adapters that fit iPhone 4 and 4S, iPhone 3G and 3GS, iPod touch (2nd, 3rd, and 4th generations), and iPod nano 5th generation. Dock adapters for other iPhone or iPod models are sold separately.  For a complete list of products that can be docked with the Apple Universal Dock, see the table below.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Is AMD Radeon r7 260x or Nvidia Gtx 750 Ti compatible with my PC?

     Hi, I have a dell inspiron 3847 with intel core -5-4460 @3.2 GHZ proccessor and integrated intel hd graphics 4600.  I think my power supply has 300 watts but I am not sure.  I was wondering if an AMD Radeon r7 260x graphics card or an Nvidia gtx 750 ti card would be compatible with my PC.  I know that the nvidia card uses less power but it costs 40 dollars more so if an amd card can go with my power supply then I will get that.  Any help would be appreciated thanks.

    R7 260X requires much larger power supply.    750 TI versions may need secure boot turned off.
    ANY card longer than about 8.1 inches is not going to physically fit into the case.

  • Can I get my GTX 670 card to be compatible with Prem Pro CC and Speedgrade cc on my windows machine?

    Can I get my GTX 670 card to be compatible with Prem Pro CC and Speedgrade cc on my windows machine?

    No need to hack anything in CC:
    "(...) This is no longer necessary in Premiere Pro CC. As long as you have a reasonably modern card with at least 1GB of VRAM, you will still be able to enable that card in the Project Settings dialog. A warning message will appear letting you know that your card has not been certified by Adobe, but once that dialog is clicked through you can use your GPU."
    See details here:
    http://blogs.adobe.com/premierepro/2013/06/adobe-premiere-pro-cc-and-gpu-support.html
    AFAIK SpeedGrade uses CUDA and/or OpenCL depending on availability, so no type or model white-list, with this one limitation only for Direct Link on Mac: only NVIDIA OpenCL is supported (NVIDIA CUDA and AMD OpenCL are not currently available with Direct Link on the Mac platform).

  • VBIOS with GOP/UEFI support for Geforce GTX 760 TWIN FROZR

    Hi,
    please provide a GOP/UEFI VBios for the GTX 760 TWIN FROZR
    S/N: 602-V284-300B1309103551
    NVFlash report:
    NVIDIA Firmware Update Utility (Version 5.165)
    Adapter: GeForce GTX 760      (10DE,1187,1462,2847) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1112 bytes
    IFR CRC32             : 8B7DF729
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : 114B182D
    IFR Subsystem ID      : 1462-2847
    Image Size            : 99328 bytes
    Version               : 80.04.C4.00.30
    ~CRC32                : 1A372C64
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK104 Board - 20040010
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 760
    Board ID              : E115
    PCI ID                : 10DE-1187
    Subsystem ID          : 1462-2847
    Hierarchy ID          : Normal Board
    Chip SKU              : 225-0
    Project               : 2004-0010
    CDP                   : N/A
    Build Date            : 06/04/13
    Modification Date     : 07/30/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Variant Id       : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK104 P2004 SKU 0010 VGA BIOS (HWDIAG)
    MSINV284MS.350
    Thanks

    Use the attached vbios.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Maybe you are looking for

  • Drop messages in queue that have a blank sender

    I'm getting hundreds of messages in the Queue where the From Address is < >.  Do I just let these build up or is there a setting somewhere that would just drop the message if it has a blank sender? Here is an example of one that I've received; Identi

  • Idoc status 52 - How to make it green i.e. 53

    My Idoc is coming in the receiver system as yellow color - status 52. No errors are shown. My data is not there. Do I need to do something to make the status green i.e. 53? I have already specified in WE21 to post immediately. Anything I am missing?

  • MSExchangeTransport 1020 'NT AUTHORITY\ANONYMOUS LOGON - How can I identify Client?

    My Exchange 2010 box is logging this error with some regularity: MSExchangeTransport 1020 The account 'NT AUTHORITY\ANONYMOUS LOGON' provided valid credentials, but is not authorized to use the server; failing authentication. How can identify what cl

  • Adobe update issue

    I installed adobe acrobat v8.0 on windows 8 64 bit ultrabook a few nonths ago. I have tried to update manually several times. Aparently there have been no updates during this time. However it also comes up with a message saying that it 'the following

  • Application Develop In URDU

    i'm using form 6i and i want to know can i develop oracle application in URDU. thanks in advance Shakeel