Guide for structure setup for jd edwards enterprise one

Hi all
I am trying to do some setup (on test environment) for jd edwards enterpriseone. I have downloaded implementation guides like financial management, general accounting, account payable, account receivable etc.
I have red that I have to create a date pattern, a company, business unit(one of them should be balance sheet business unit) etc.
I am looking for some guide which can explain to me clearly which is the setup structure in jd edwards.
So if I make a parallelism with EBS, in E-Business Suite 11g is stated the the first is the Organization, above we have the GRE Legal Entity (setup of books composed of calendar, currency and chart of accounts) ect until inventory units.
I want some guide which explain also the logic of jdee1. So why the company need business units, which is the difference of BS units with the other ones etc.
So basically some guide to explain these thing in detail. I have downloaded several guides like the Complete Reference, Security, different implementation guides etc etc but still not being able to find the information that I need.
Thank you and best regards

Hi,
If you are an Oracle employee, you may download the student guide. Else, following may be used as a reference(is not exhaustive though):
a.     Setting Up of General Accounting Constants (P0000/F0009)
b.     Setting Up Fiscal Date Patterns – 14 period and 54 period accounting (P0008/08B), (F0008/08B), (F0902/F0902B), F0911 is common.
c.     Setting Up of companies (P0010/F0010)
d.     Setting Up Business Units, including Model (P0006/F0006) - MCU
e.     Designing and managing the Chart of Accounts (P0901/F0901)
f.     Creating a Model Chart of Accounts
g.     Creating Accounts Using Dynamic Account Creation
h.     Automatic Accounting Instructions (P0012/F0012)
i.     Multi Currency Setup
i.     Currency Code – P0013/F0013
ii.     Designate AR Currency – P03013
iii.     Designate AP Currency – P04012
iv.     Currency conversion rates – P0015A
j.     Next Numbering (P0002)
i.     By Company
ii.     By Company and Fiscal Year
k.     Tax Processing
i.     Sales Tax, VAT Journals etc.
ii.     Tax Authorities– P01012
iii.     Tax Rates/Areas- P4008
iv.     Tax Rules- P0022
v.     Tax Explanation Code – P0004A
l.     Ledger Type Master (P0025)
m.     Document Type (P0004A)
Thanks.

Similar Messages

Hands on Lab JD Edwards Enterprise One Business Service Development

Hi,
I completed the "Oracle Open World 2008 - Hands on Lab JD Edwards Enterprise One Business Service Development" PDF at [http://www.oracle.com/technology/tech/fmw4apps/jde/pdf/openworld08_businessservicedevelopment.pdf].
I ran the business service at the end of the lab to get the following error:
Internal Server Error (Caught exception while handing request: oracle.e1.bssvfoundation.exception.E1AuthorizationException: User is not authorized to invoke this published business service)
How can this be resolved?
We are on 8.12 and 8.97.1.2 tools
Cheers,
Steve.

Hi,
I am having problems at step 5 in your last post.
" 5) Check your Published BSSv is set to published or not in OMW. If not go to security workbench and select the option publish BSSV from Form Exit and Add Custom Published Business service created, make it Executable."
- The business function is not published. I try to in Security workbench (P00950) and publish BSSV row exit not to find my newly created business service object (JP55HOL). I can see all the standard ones but not mine. I open the P00950 application to know what the underlying tables are in the Business Views the grids source the data from, to find that JP55HOL exists in the Object Librarian table F9860 but not in the Business Service Published Methods P98630. For the business function to be published, the record needs to exist in this table. How could this record not be written and how can it be corrected through the Application?
- I don't understand what "or not in OMW" means?
Please understand that I have followed the hands on lab with no other BSS setup on 8.12/8.97
Thanks,
Steve

HOW to download The Demo Version of Oracle JD Edwards Enterprise One 9.0,

Dear Friends,
Can any one tell me how to download The Demo Version of Oracle JD Edwards Enterprise One 9.0, for Practice purpose,
if you have any links please tell me,
and how much capacity of hard disk need to store the same.
I am Learning the Oracle JD Edwards ERP, so that i want to Practice it in my home.
Is it possible to work demo version with out Internet facilities?
regards.
AR

user11690597 wrote:
Thanks for the link, but not able to find JDE demo version for download.It's not quite as simple as 'click the download' button. You gotta get the infrastructure in place.
As recommended, go to http://edelivery.oracle.com , click on Continue, fill the legal page, select JD Edwards for your OS, and start downloading. I would probably start and stop with the Installation document, since that likely has information such 'how much of the 60GB download is really required'.
In the Oracle world, learning and practicing starts with reading.

JD Edward Enterprise One

hey
I have a customer who is facing some performance issues with JD Edward enterprise one application and have interest around Pack for better managability. This application is hosted on DB2 (IBM).
They are looking for a pack which works with DB2 database.
Is there a whitepaper or datasheet available on this.
thanks in advance.
Regards
vasudha

Uhh, there is actually a separate category for JD Edwards Enterprise One. On the Forum home, keep paging down past the JD Edwards World category and you will find the JD Edwards Enterprise One category. World and Enterprise One are technically very different products and thus those of us running JDE World won't be able to offer much help with an Enterprise One issue. World, for example, only runs on the IBM AS/400 (or System i or Series i or i Series (IBM keeps changing the name)) computer, whereas Enterprise One runs on various types of hardware. World thus uses only the DB2/400 implementation of IBM DB2. So I suggest posting this issue in the JD Edwards Enterprise One category on this forum.
John Dickey

Command line for replication setup for DS 4.16

I am using Directory Server 4.16. I see example using command line for replication configuration in DS 5.0. Since 5.0 is quite different with 4.16. So my question is how to use command line to set up a Supplier in DS 4.16?
I know we can use ldapmodify to do some change. I see an ldapreplica entry. I can setup supplier id and password there. It seems only change that entry is not enough. Where to setup the setup for "changedatabase", "replication schedule", "initial consumer later" something we do at the console screen?
Your help is greatly appreciated.
Iris

Hi Iris
Steps involved in Setting up Replication from command line
Part I: On Consumer Directory Server
1. Log on to the consumer directory server.
2. Stop the consumer directory server
3. Edit the slapd.conf file at <server-root>/slapd-<server-instance>/config so that it includes the following two lines. The lines show the DN of who is allowed to connect for replication and the entry's corresponding password.
updatedn "uid=<REPLICA USER BIND DN>"
updatepw {SHA}<SHA ENCRYPTED REPLICA USER PASSWORD>
4. Edit the dse.ldif file at <server-root>/slapd-<server-instance>/config so that the entry cn=config contains the following two lines. These lines contain the same data as the line above.
nsslapd-updatedn: uid=<REPLICA USER BIND DN>
nsslapd-updatepw: <PLAIN TEXT REPLICA USER PASSWORD>
5. Start the consumer directory server
Part II: Creating the Replication Agreement
1. Log on to the master directory server
2. Stop the master directory server
3. Edit the slapd.conf file at <server-root>/slapd-<server-instance>/config so that it includes the following two lines. This lines setup the changelog directory and suffix.
changelogdir <dir path >
changelogsuffix "cn=changelog"
4. mkdir <CHANGELOG DIR>
5. Start the master directory server
6. Create a file named replica.ldif which contains the following lines. These lines reflect the agreement which will start the replication with the consumer; as such you should make the changes to reflect your environment.
dn: cn=<CONSUMER FQDN>:<CONSUMER PORT>/o%3D<BASE DN>, cn=ldap://:<SUPPLIER
PORT>,dc=<1ST ELEMENT OF SUPPLIER FQDN>,dc=<2ND ELEMENT OF SUPPLIER
FQDN>,...,<TOP LEVEL SUPPLIER FQDN>
changetype: add
objectclass: top
objectclass: LDAPReplica
replicahost: <CONSUMER FQDN>
replicaport: 389
replicanickname: <CONSUMER HOSTNAME>
cn: <CONSUMER FQDN>:<CONSUMER PORT>/o%3D<BASE DN>
replicaroot: o=<BASE DN>
replicabinddn: uid=<REPLICA USER BIND DN>
replicacredentials: <REPLICA USER PASSWORD>
replicausessl: 0
7. Run ldapmodify with the proper authorization so that the entry is added correctly.
8. There is an optional attribute which can be tacked on to the bottom of the above entry. The attribute 'replicabeginorc' will tell the server to immediately start on-line replication; this will initialize the consumer by deleting all the current entries on the consumer one at a time and then adding all the entries from the master one at a time. If this is something you want to do, do an ldapmodify adding this attribute to the entry you just created in step 8.
for example
Create a file called beginreplica.ldif like;
dn: cn=xymox.mcom.com:389/o%3Dinternet, cn=ldap://:389,dc=fts,dc=mcom,dc=com
changetype: modify
add: replicabeginorc:
replicabeginorc: start
then run;
ldapmodify -h fts -p 389 -D "cn=Directory Manager" -w netscape -f beginreplica.ldif
Hope this helps
Roy

Pre-requisite for lab setup for database administration track.

Hi, does anybody know what setup is required to participate in Lab for database administration track on Feb 11?

The code you have in the rules file looks like it is incorrect. PCon would not be defined automatically and would therefore return zero. I think what you are actually looking for is something like:
Call Hs.Con ("",HS.Node.PCon(""),"")
Note that you can determine if the consolidation rules are used from you metadata under AppSettings. Look for the setting called ConsolidationRules. If you set this to Y, it uses the rules under Sub Consolidate(), if you set it N, it will automatically consolidate even if you have nothing under Sub Consolidate().
Further, you can affect what gets consolidated in the metadata. Some of your accounts etc. may not be set correctly. Some things to check:
For Accounts, make sure that IsConsolidated is checked and the AccountType is correct
Also for Accounts, ensure that EnableCustom1Aggr ... is checked
Finally, if the Entities have different currencies, check if you are getting data up to [Parent Total]. If not, the problem is your translation and not your consolidation.

EWA setup for EP.

Hello All,
I am trying to make configuration for EWA setup for EP.
EP version is 7 on windows64bit and Solman version is 4.0 on Solaris64 Bit with basis and abap SP on 14 level.
When i refereed to previous blogs and notes it says we need to install Wiley intro-scope agent in EP and set up diagnostics in Solman.
Can any 1 please let me know how to move forward. I need to install Wiley intros-8. How to install this on already installed EP.
Regards,
Ravi

You will need to install a Wily agent and a SOLMAN Diagnostics agent on your EP system. These agents will report the data to your SOLMAN system. You will need to have Diagnostics configured in your SOLMAN system.
This data will be used for generating an EWA for a JAVA system, like your portal. You can find all the relevant guides on how to set this up at http://service.sap.com/diagnostics
Wily setup guide for example: https://websmp203.sap-ag.de/~sapdownload/011000358700001995842008E
See also Note 976054 - Availability of EWA for Non ABAP components
Edited by: J. Hellemons on Nov 5, 2009 1:31 PM

IMAP setup for .Mac account and Gmail

I've been trying to use my .Mac account and Gmail with mixed results. I have been using Mac mail for some time and have my folder structure setup for personal and work. Now I want to add a work Gmail account and simply have a separate inbox for the Gmail account. I store messages from both accounts into the folders I have in the .Mac account.
Gmail caused all sort of issues using IMAP in this structure, basically creating another series of folders below the .Mac folder tree. The inbox structure was fine and I could stored Gmail messages into the .Mac folders. But there were duplicate copies of the messages in the Gmail IMAP structure. I wasn't sure if I should just delete the Gmail structure, but the duplicates were driving me crazy whenever I did a message search.
Now I've backed Gmail down to POP and I have all sort of sync problems between my laptop and desktop systems. On my laptop it shows no mail, but when I check Gmail. There is mail in my inbox.
Does anyone have an idea about how to use two IMAP accounts successfully in Apple Mail?

Okay. This has got to be a common issue. And I think I have it solved.
The secret is using an IMAP prefix of "IMAP" and then creatin labels of "IMAP/Foldername" on Gmail.
It's all generously explained on these links:
First setup IMAP on Google like this: http://mail.google.com/support/bin/answer.py?answer=77663&topic=12814
Then follow the advice here: http://www.macosxhints.com/article.php?story=2008041016554622
And more here for help with Mail and iPhone: http://5thirtyone.com/archives/862
Things get cleaned up immediately! Ah ... bliss.

Idoc Setup For Automatic Payments

could any body share Step for IDoc setup for Automatic Payments?
Thanx in in advance.
Indra.

Idoc Setup For Automatic Payments .

Please Help Me Complete My Office Setup for My MacBook Pro

Hi all,
OK, here is what I am in the market for:
1. Bluetooth Keyboard
2. Bluetooth Mouse (preferrably rechargeable)
3. External LCD Monitor, DVI (20-24 inch, preferrably 24)
I am looking to spend around or under $600, if possible.
I have a MacBook Pro, 15", 2.2 GHz Intel Core 2 Duo. It is my primary computer. I run both OS X and Vista (via Bootcamp). I have been running Vista much more lately for business purposes.
Basically, I am looking for a setup for when I am sitting at my desk (as opposed to on the couch, for example, where I use my Rain Design iLap).
I am not opposed to having a wired keyboard or mouse either, but I thought bluetooth would save me the hassle of having to plug those in every time I sat down to my desk, in addition to the monitor and power plug.
Thanks.

Apple Keyboard and Mighty Mouse:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nnmm=br owse&mco=88075103&node=home/shopmac/mac_accessories/micekeyboards
Monitors, can't help you there.

Clone JDEdwards Enterprise One from Production to Test

Please advice what is the way of Cloning JDEdwards Enterprise One from Production to Test.

Uhh, this is the JD Edwards World forum. There is actually a separate forum for JD Edwards Enterprise One. Go back to the Forum Home and scroll down past JD Edwards World and you will find the Enterprise One forum. Technically there is a good amount of difference between World and Enterprise One. So to get better answers to your question, you need to post this on the Enterprise One forum. Good luck.
John Dickey

Debug JD Edwards "C' Business Function setup for Vistual Studio 2008

Please can anyone send me the setup for Debug JD Edwards "C' Business Function with Vistual Studio 2008
using C:\e812\system\bin32\activConsole.exe

You don't need any setup; just build the bsfn in debug mode, exit form jde, run VS2008, opne the jde solution file, set a brekpoint into your bsfn and it works.

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

How Are Your Controllers Setup for BYOD/Guest and OEA

I am in the process of building a new wireless network. The network will include BYOD/Guest and OEA for teleworkers using ICE and MobileIron for MDM. In the past I have setup an anchor controller for guest, but for this design I have a cost constraint that prevents me from adding the anchor controller. I know the Cisco SE’s push to include an anchor controller in the DMZ for this design, but I wanted an unbiased opinion from folks who may have a similar design and how your controllers are setup. For this design can I deploy a BYOD/Guest and OEA network without a DMZ controller?
Thanks in advance.
Bret

Hi Bret,
You can use WLC with Cisco ISE.
Here is the full deployment guide:
http://www.cisco.com/image/gif/paws/113476/wireless-byod-ise-00.pdf
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba10d.shtml
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_ISE.html
Hope it helps.
Regards
Dont forget to rate helpful posts

Unable to configure Mail setup for SMTP : Please Help

Hi experts,
             I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
          Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                SMTP server is installed,
                 SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
Sunil

Hi Juan, Hi Juan,
             Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil

Guide for structure setup for jd edwards enterprise one

Similar Messages

Maybe you are looking for