EWA setup for EP.

Hello All,
I am trying to make configuration for EWA setup for EP.
EP version is 7 on windows64bit and Solman version is 4.0 on Solaris64 Bit with basis and abap SP on 14 level.
When i refereed to previous blogs and notes it says we need to install Wiley intro-scope agent in EP and set up diagnostics in Solman.
Can any 1 please let me know how to move forward. I need to install Wiley intros-8. How to install this on already installed EP.
Regards,
Ravi

You will need to install a Wily agent and a SOLMAN Diagnostics agent on your EP system. These agents will report the data to your SOLMAN system. You will need to have Diagnostics configured in your SOLMAN system.
This data will be used for generating an EWA for a JAVA system, like your portal. You can find all the relevant guides on how to set this up at http://service.sap.com/diagnostics
Wily setup guide for example: https://websmp203.sap-ag.de/~sapdownload/011000358700001995842008E
See also Note 976054 - Availability of EWA for Non ABAP components
Edited by: J. Hellemons on Nov 5, 2009 1:31 PM

Similar Messages

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

EWA GCA for non-ABAP

Dear all,
I've setup the EWA for our SAP Enterprise portal system (non-ABAP), i've already refer to the note 976054 but along the way I am facing some issues, hope anyone here that has such experience or knowledge could share it with me.
Here I would like to seek help on this 2 issue first:
1. EWA GCA Task in SMD
In SMD Scheduler, I check at the EWA GCA task, there is the error :
Execution failed: RemoteFileNotFound See log for details. Next execution in 60 min(s).
com.sap.sup.admin.scheduler.exception.FatalTaskExecutionException: RemoteFileNotFound See log for details
at com.sap.sup.admin.ewa.gca.TdaTask.process(TdaTask.java:511)
at sun.reflect.GeneratedMethodAccessor355.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87)
at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90)
at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:266)
at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45)
at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
at java.lang.Thread.run(Thread.java:534)
I not able to find any sapnote or forum that could solve this simillar problem.
*2. runtime error "CREATEDATA_UNKNOWN_TYPE" in ST22*_
Short text
    CREATE DATA: The specified type "/BI0/V0SMD_PE2H2" is no valid data type.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSMD_FUNC" had to be terminated
    come across a statement that unfortunately cannot be executed
please advise me, as I do not setup any BI client (in solution manager), or using any BI system. How should I correct the error? is BI is a must (either BI client or external BI system) ?
the BI_CONT is 703 release SAPKIBIIP8 0008
please help, thanks in advance!
Edited by: Lay Peng Lee on Sep 17, 2009 3:38 AM
Edited by: Lay Peng Lee on Sep 17, 2009 3:38 AM

Hi Kelly,
BI content is for the reporting purpose and forms the base of the Diagnostics.
By default BI Content is delivered in SAP solution manager- Client 001,. you can use it. You can also have a client copy as per Standard and use it as BI client.
You have to perform the Following activities to use it for Diagnostics:
1) Activate the BI content and perform some Changes including manual activation.
2) Generate some users between clients to aid the commuication between BI and your Production client.
3) Use the BI client as a Backend BI during Diagnostics setup(SMD) and run the configuration Process.
All the above steps forms the aprt of Initial and Basic Configutation in solution manager.
Then you have to perform managed system setup for your component.
Hope this helps.
Kindly revert for any issues.
Thanks,
Jagan

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

EWA Report for DEV/QAS System (if possible)

Hi Experts,
I would like to know if it is possible to generate EWA reports for DEV/QAS Systems. I believe i have set up all the necessary RFCs for our SOLMAN to communicate with the DEV/QAS systems.
When I try to create an EWA session in SDCCN of the DEV/QAS system, the only destination i can choose is "NONE" which is local.
Any idea how I can send this to my SOLMAN. My SOLMAN is already configured to be the master system of my DEV/QAS system.
Any help would be appreciated.
Thanks.

Hi Prince Jose,
My problem actually is that I want to set up EWA for a DEV system. I have tested all the RFC connections to and from my SOLMAN.
Even the RFC connection in SDCCN -> Settings .. -> RFC destination, i have 2, one SAP_OSS and my 'back' RFC to my SOLMAN and everything is working OK.
Would you be able to give me a step by step guide on how to setup EWA. From what i know:
1. Setup the system via SMSY (done)
2. Generate the necessary RFCs (done and tested OK)
3. Set SOLMAN as the master system of the satellite systems (done)
4. Create the necessary task for EWA via SDCCN of satellite system
Are the steps correct?
Thanks

EWA Generating for EHP4 Systems

Hi,
I had generated EWA Reports successfully for ECC6.0,ECC5.0 Systems.
Now iam configuraing EWA Report for EHP4-SP04 sytems,i did all the settings in solution manager,when iam ruiing RTCCTOOL in satelite System iam getting below warning.Is this creating any problem to generate report.
Setup of the EarlyWatch Alert service
[ checks that min. 2 EWAlert sessions to SAP Solution Manager or to SAP
are found in last 60 days, and that SDCC session manager job runs ]
We recommend that SAP Solution Manager be used to monitor your systems
via Earlywatch Alert. In this case you activate it just by including
a system into a Solution Landscape. See the note 1257308 . If this is
not possible, data for productive systems can be processed at SAP.
In SDCCN when iam creating maintenace package,refresh sessions after finishing successfully disappearing from screen,not generating any early watch alerts.Guide me for the same.
Thanku,

Okay. Hmmm...
Than I would query the EarlyWatch of the Satelite System over the Solman.
Logon to your Solman.
Navigate to the Solution in which the Satelite System was created.
Operations -> Solution Monitoring -> Early Watch Alert
Scroll down to the next Early Watch for your system in the future and click on it.
Change the Date of the Early Watch to the current day and time and run the suggested Job in the Solution Manager.
After the job is finished (control it via SM37), there should be a Early Watch Task in SDCCN of the Satelite System.
Best Regards
Tobias

EWA reports for SAP Content Server

Hi
I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for SAP Content Server.
As per Content Server for EWA reports need to be configuring only Database and OS.
Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
Regards,
Panu

Hi There
In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
this link below..
http://service.sap.com/EWA >> Media Library
Best Regards
Jai Wardhan

HT4557 whats the best itunes/appleID setup for family of 3 with 3 ipads, 3 iphones, one PC with all music on. if we use 3 separate ones how do we share purchased and home content?

been with apple for years. one itunes/appleID in use for family - all purchases and downloads on the one account..
now got 3 ipads, 3 iphones and when we update the software, we seem to get text/facetime issues due to multiple email addresses and phone numbers for the different devices that each individual uses. For example, I send a text and it appears to have come from my wife or son to the recipient. Not good !
there seems to be direction from apple that each of us should use our own apple id, thogh how do I link the accounts so enable family sharing of music/media we have purchased etc - Id also like to be able to review and keep a private eye on what my son downloads as he is 11 yrs old ! I manage this currently as we allow him access to the password for itunes (as we all use the same id today)
Am i better setting up accounts for my wife and son independent of my own, or not. Each of us would like access to the family content we have and the master library of synced content. I just want the most simplistic approach that apple, or others would recommend.
Is there a better or optimum setup for a family as we cannot be alone.....

Thanks for the help, but a follow up question now.
My iPhone won't arrive for a little while, but my wife already got hers and she wants to set it up now. Using my Apple ID for the purchases, if she starts setting hers up, can she change her iCloud ID to something else quickly? It keeps telling us that we have to sign in with the AppleID first.
Should we just set up an iCloud account via normal internet before trying all this via iPhone?

What is icloud setup for Multiple users, multiple devices in family?

What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?

I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first.

VPN Client and Setup for RV042

Is there a definitive setup for a small VPN using the RV042?
Situation is 2 remote users wish to get access to a non server (W7P) pc to access files.
The end point doesn't have a static IP but I've put in a DYNDNS.org so it reports back the IP and I can access the router at least from outside.
I can setup VPN users but is there more to do?
Wish to use QVPN client or advise alternative.
Appreciate all input.
Thanks
Bruce

Bruce,
QuickVPN normally works well for what you wish to do. Make sure that the Windows Firewall is ON in Windows 7 and Windows Vista clients. Turn off all antivirus and third party firewall software as well at least until you have verified that you have a successful connection. It is very easy to set up, just create a username and password in the router. If you run into trouble, post here or call your local Small Business Support Center:
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Unable to configure Mail setup for SMTP : Please Help

Hi experts,
             I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
          Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                SMTP server is installed,
                 SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
Sunil

Hi Juan, Hi Juan,
             Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil

ICloud setup for Family to only share Apps

Okay, so I've tried reading through several different articles to figure this out but I'm not getting anywhere so I'm hoping there's somewhere here with a similiar setup that can just give the basic setup. So here's what I want to do, I want to be able to setup icloud on each of my families devices so they are backed up into their own accounts but I also want to make sure that App's are shared across the devices. Here's the setup that I have:
1. For Myself I have an iPhone and a iMac
2. My wife has an iPhone and a Macbook
3. My son has a iPad
Now right now everyone is linked up to my Apple ID since that's the account in which all the Apps are purchased and the billing information is linked up to. I want to setup each device with an icloud account as well so our informaiton can be backed up but I don't want information crossed over between devices (for example I don't want all the contacts from my wife's phone on my phone nor do I want our messages sharted on my son's iPad). I'm not sure on how I can go about this since right now each device is hooked up to my Apple ID (so we can use the Find my iPhone app as well for each device) so I don't know if I create a separate account for everyone if that will still work or if I need to know each login and password. I also want to setup a icloud e-mail account that I can use for the iMac and my iPhone only, and the same setup for my wife and her Macbook. Any help would be great, thanks.

To avoid sharing and merging your iCloud data, you will need to put each person's devices on a separate iCloud account with a separate ID. You can continue to all share the same ID for iTunes; it does not need to be the same as the ID you use for iCloud.
Creating separate accounts will keep everyone's iCloud data separated, and give each person's devices their own 5GB of free storage for their device backups, and a separate iCloud email account/address. However, Find My iPhone (iPad, iPod, Mac) is tied to the iCloud ID so they cannot be tracked together on the same map. You will have to sign into each iCloud account separately (on icloud.com or the Find My iPhone app) in order to locate devices using that iCloud ID.

SSL Certificate setup for Web/Address Book/iCal in 10.7 Lion?

I know nothing about certificates. I plan to use my Mini server to help manage my family's computers which are pretty spread out across the U.S. My plan is to use profile manager for device management, host a couple websites (one secure for home security cams) and share address books and calendars. This is as much a geek gadget project as it is "useful" so I understand I may be creating some work for myself
Anyway, can someone walk me through the correct setup for certificates? My research is showing me a LOT of options/parameters. Due to the expense, i don't want to create one just to find it won't serve my purposes.
Also, I think i'm going with RapidSSL...$50 is the cheapest I've come across...hopefully the offer what I need?

I have just spent 30 minutes on the phone to a pleseant chap in Athens, and now have a solution.
We tried several options and the final one worked - so simple.
Click on the apple symbol > system preferences > iCloud > disable contact sync > keep contacts
Check search, in my case it worked for the first time in several weeks :-)
then re-enable contact sync as follows:
Click on the apple symbol > system preferences > iCloud > re-tick contacts > merge contacts
Search still works
Hallelujah!

Office 2013 RMS Client Configuration - Your Machine is not setup for IRM

Hi All,
I have successfully setup a test AD RMS farm but stuck at trying to configure Office 2013 to work with this. The farm configuration is as below
DC: Windows 2003
AD RMS Server: Windows 2008/ SQL Server 2008 R2
Client: Windows 7 64 bit with Office 2013 32 bit, Domain Joined
Client is domain joined and SCP has been successfully registered ( I can see the SCP in AD RMS properties).
When I open word and select Protect Document -> Restrict Access, the only option is to Connect to RMS Server and get template, which eventually gives an error
Your Machine isn't setup for Information Rights Management (IRM). To set up IRM, sign in to office, open an existing IRM protected message or document, or contact your help desk.
Surprisingly, when I open a document protected by IRM (from a different machine), IRM is automatically configured for the user and starts working from that point. However any new domain user login into this client faces the same issue.
Can anyone help identify the required registry keys that need to be present for getting this working on the client.
Thanks for your help
Anuj

Hi Manoj,
To install Microsoft Deployment Agent, you must be a member of the Windows
Administrators security group on the computer where you will install it. You must also be a member of the
Release Manager role in Release Management.
From the log, the user you‘re using seems not in the local administrator group. Please make sure the corresponding users has the needed permissions to install the deployment agent. Please check this
page for more information about installation of deployment agent. If you have any other issues, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can multiple orgs be setup for one account?

Hi,
Is it possible to have multiple organizations setup for the one account? This is in a sales/campaigns context.
Thanks.

If you are referring to linking a customer account to multiple parties I don't think it is possible.

EWA setup for EP.

Similar Messages

Maybe you are looking for