GW 2012 Create Trusted Key not showing up in Console One

Hello All,
We are trying to add a trusted key to our GW domain, and are following the steps widely available (Click on domain, then Tools -> Groupwise System Operations -> Trusted Applications. Then click "Create".) There is no "Create" in the options.
- We are logged in as the Admin user with appropriate Admin rights
- We are running groupwise 12.0.3-116810 for all of our GW processes.
- We are running Console One 1.3.6h
- Our Groupwise Administration Snapin is 8.0.0
- We cannot access it through webconsole at this time.
Does anyone have any ideas?
Thanks,
Eric

In article <[email protected]>, EMcCord wrote:
> - Our Groupwise Administration Snapin is 8.0.0
how about getting the GW 2012 snap-ins in place.
Which server OS are you running GW on?
Is C1 running on the server as well?
Andy of
http://KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

  • Workstations not showing up in Console one (had been deleted before)

    We're having a problem at the school I work at. I had installed Zenworks on
    a particular set of computers and they became registered in Console One. We
    then had some problems relating to other software and decided to take
    Zenworks off of these computers. This was just poor troubleshooting. We
    deleted these workstations from Console one as well. We've since determined
    that Zenworks was never the problem and reinstalled it on the those
    desktops. Unfortunately, the machines aren't re-registering within Console
    One and will not show up.
    Any help would be greatly appreciated. Thanks.
    Console One version: 1.3.6c
    Zenworks 6.5
    Novell Client 4.90 SP2

    Tallbrooks,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • I'm a MAC beginner; embarrassed to ask: Although Word, Pages,Key note show in my app list, they won't open.  With Word, I get a pop-up that says it won't open, and then has numerals 1712. Just downloaded Flip Player 2 days ago..what should I do pls??

    I'm a MAC beginner; embarrassed to ask: Although Word, Pages,Key note show in my app list, they won't open.  With Word, I get a pop-up that says it won't open, and then has numerals 1712. Just downloaded Flip Player 2 days ago..what should I do pls??

    It is possible the versions you have are not compatible with your new Mac. Could you please tell us the following:
    1. What OS are you running.
    To get this info, click on the Apple on the top left, then select About This Mac. The OS X version is there.
    2. What are the versions of the apps that are giving you problems?
    To get this info, double click on the hard drive icon and open the Applications folder. Select an application and right click on it. Then select Get Info. The version number is there.
    Version number:
    Not sure I understand your reference to Flip Player - this is not related to the "won't open" problem, is it?

  • ? how to add page numbers in pages 5.2, starting with 2.  Pages '09 had an option to not show folio on page one.  Also any how to do left and right folios for a Tabloid?  Many trhanks

    ? how to add page numbers in pages 5.2, starting with page 2.  Pages '09 had an option to not show folio on page one.  Also any idea how to do left and right folios for a Tabloid?  Many thanks  . . .

    Hello jacquemac,
    Your first question:
    There might be a better way of achieving what you wish to do, but following these steps could help you out.
    You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
    1. go for Documents (right end of the Toolbar) -> Section
    2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
    (what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
    3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
    4. click on your second page (the first page of your second section) and  "Insert page number" -> start at 1
    Your second question:
    Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
    greetings jl

  • Directory not showing in attendant console

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Under Engineering ----Service Management,can u check LDAP service is running.
    Also, under system configuration ---directory synchronisation ----Enable contact synchronisation is enabled.
    Also, u are creating this user in AD and then, fetching to CUCM and Attendant Console is finally these users as CCM Source.
    regds,
    aman

  • HT1473 Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

    Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

    Generally adding a common album artist will fix things.
    tt2

  • BPEL Processes are not showing in BPEL Console after OPMN restart

    Hi All,
    BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
    Can some one help on this?
    Thanks

    Vikky,
    Are you using 10g?
    If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
    It might relates to permissions, or DB issues etc....
    Arik

  • I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Hello,
    Can you tell us what versions of CUCM and CUxAC you are using?  Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application.  You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
    Thanks,
    Tony

  • Calendar event created on iphone not showing in ical.

    I have a 4S and when I create a calendar event in ical, it does not show up in my ical ofn my Macbook Pro.
    I have check sync calendars in iTunes and have selected to display all calendars in my Macbook's iCal.
    Is ther some thing I am overlooking, or a step I may be forgetting?
    Thanks

    After a trip to the genius bar, I found how to solve this problem, at least for me:
    0) Plug in iPhone
    1) Start iCal
    2) Export all calendars (File -> Export)
    3) Quit iCal
    4) Delete all calendars from ~/Library/Calendars
    5) Start iCal
    6) Import all exported calendars
    7) Start iTunes, configure syncing to overwrite calendars on phone
    8) Sync iPhone

  • Groups created with dscl not showing in WGM?

    When creating a group "testGroup1" via dscl as follows ...
          Dscl -udiradmin /LDAPv3/mac-mini.local -create /Groups/testGroup1
    The group shows up when running ...
          Dscl -udiradmin /LDAPv3/mac-mini.local -list /Groups
    However, in Workgroup Manager the new created group"testGroup1" does not exist.
    Is there a way to determine where exactly the newly created Group is located?
    I did notice that the Workgroup Manager directory location is /LDAPv3/127.0.0.1.
    Does the 127.0.0.1 have something to do with it?
    Also, if I try to run the following ...
          Dscl -udiradmin /LDAPv3/127.0.0.1 -list /Groups
    I get an error saying "Data source(/LDAPv3/127.0.0.1) is not valid.
    I know it's there because it shows when I run a different tool called Ldapmanager.
    But for some reason it's not showing in Workgroup Manager.
    I was wondering if there is some attribute (or something like that) that must be set when creating the group before it will show in Workgroup Manager.
    Or maybe the server needs to be rebooted before they show? I wouldn't think that would be necessary, unless the users are being loaded when Workgroup Manager loads.
    Any help would be greatly appreciated.
    Thanks,
    Zeek

    Hi David
    There is a configuration that needs to setup to turn on outbound delivery document number update in MD04.
    This means if there is an STO in MD04 which is converted into outbound delivery, MD04 should now show outbound delivery number instead of an STO
    Follow this path and set up the document type of your outbound delivery in it
    Logistics execution -> Shipping -> Basic SHipping Functions -> Availability Check and transfer of requirements -> transfer of requirements -> Determination of Requirement Types using transaction

  • Created By and Created Date fields not showing up on Custom List form webpart

    Hi,
    I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
    <td width ="400px" valign= "top" class="ms-formbody">
    <xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
    </td>
    However these fields are not showing/populating data on the form ?? Any inputs ???
    Regards

    Hi,
    I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
    Hope it can help you.
    Xue-Mei Chang

  • PO created in SRM not showing in ERP

    Dear All;
    We are using SRM7, classic scenario.
    The buyer converted a SC to PO then deleted it in ERP.
    The SC appeared again in SoCo
    He created another PO but  it did not get transfeered to ERP.
    In Related document of the SC, it shows the Deleted PO with status Deleted but it did not show the new one.
    The SC is NOT shoiwng in SoCo anymore
    In BBP_PD (document display) I can see the new PO number.
    My questions:
    1. How to update the staus of the SC?
    2.How to transfer the PO to the backend 
    for your information, i executed BBP_GET_STATUS_2 but still not updated. I also checked WE05 (IDoc)
    Thanks

    Check the Log in RZ20 for PO.

  • Windows 7 boot key not showing up in boot menu.

    I have installed the Windows 7 ISO to a flash drive to use on boot up, using the instructions here: https://discussions.apple.com/thread/5488789?tstart=0
    I have a Late 2009 iMac and the optical drive is broken; that's why I had to use those instructions and intend to use a boot key.  However, when I boot up with the option key, the only options presented are Macintosh HD and Recovery HD.  No Windows boot or EFI boot to be found.  Does anyone know why this might be?  I have gone through the partitioning process in Boot Camp Assistant.  I really don't know why it's not showing up.  Any help is appreciated.  Thanks.
    Screenshot provided for reference.

    Christopher,
    I can't think offhand of why it would not come back like this (but if you have configured ZPM to use content-repo to store its bundles I would recommend getting http://download.novell.com/Download?...d=f0VuQBxq8DI~ as that fixes problems where a patch isn't cached, even though it thinks it is). Does the patch status tab show any errors? Otherwise we're basically going to need to look at logs...
    Shaun Pond

  • OBIEE : Newly created rpd file not showing in the online mode in Admin tool

    Hi,
    I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
    1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
    a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
    b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
    c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
    d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
    But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
    2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
    Thanks
    Sanjay

    Dear Muram,
    Is did not work.
    1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
    2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
    Thanks
    Sanjay

  • Problem with newly created CM Repository NOT showing in Repositories Link

    I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows).  Here is what I have done so far...
    1.  Created a Windows file share
    2.  Configured a new CM Respository Manager (Persistence Mode FSDB)
    I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
    It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
    I restarted the service and still no luck...
    How do I troubleshoot this???  I am not sure where to begin.  Please be very detailed as this stuff is new to me.
    Thanks,
    Tom

    I tried that and still no luck.  Here is the interesting thing:
    - If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
    - If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
          "Startup Error: could not create directory:
    172.xx.x.xx\folders\Root\Versions\versions"
          My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
          The IP address is correct but where is the rest of this path coming from???
    - If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
          "Startup Error: folder
    172.xx.x.xx\folders\Root does not exist"
          My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
          The folder does actually exist.
    So confused...

Maybe you are looking for