H264 made with FFMPEG not read correctly

So I've found that encoding a video file to an h264 using FFMPEG is creating a file that is missing the first two frames in CC 2014.1.1
This problem only started in the latest version of CC 2014 and does not present itself CC 2014.0
Here is the command used to encode:
ffmpeg -i input.mov -c:v libx264 -pix_fmt yuv420p -b:v 50000k output.mov
Anyone else noticing certain h264 files not coming into your Adobe products properly?

Hi LG,
If you have time, could you file a bug report? One from you is going to have more weight than one I could write. Here is the form: http://adobe.ly/ReportBug
Thanks,
Kevin

Similar Messages

Updated iphone 5 to iOS 6.1.3, now trouble with keyboard not responding correctly and screen zooming in by itself...

updated iphone 5 to iOS 6.1.3, now I am having trouble with keyboard not responding correctly and screen zooming in by itself...
Buttons pressing themself...
Also, my main screen is permanently zoomed in...
suggestions?

Double tap the screen with THREE fingers, that should get it back to normal again.
Then go into Settings > General > Accessibility > Zoom > OFF.
Not too sure about the keyboard and random button presses though. Back it up and restore from iTunes, see if that fixes it.

Organizer changes to me when accepting event made with Lotus Notes

This problem seems to happen when an event is made with Lotus Notes (8.5.2) is sent to me via email. After I accept the event I become the event organizer and emails are sent out to all the other attendees by me.
Looking at the original CalDAV event in Textedit I can see that the event has an organizer listed this way. ATTENDEE;ROLE=CHAIR;... However, once the event is brought into Calendar that person's status in the event gets demoted to ATTENDEE;CN="FIRST LAST";CUTYPE=INDIVIDUAL;PARTSTAT=TENTAIVE;ROLE=REQ-PARTICIPANT... Looking at the imported event Calendar there seems to be no organizer listed which could be why I become the organizer. A sort of default behaviour.
Has anyone seen this behaviour or have any suggestions for me.
Much appreciated.

After I had my former notebook migrated to a new one, I am back to a problem I had before.
After probing around a little bit I found: Sync of notes calendar works for the minimum interval 1 week in the past, 1 month in the future. But as soon as I change either one to more, no data gets transfered to the phone. The report says: A problem occured, therefore sync was aborted.
- What is wrong with my calendar data in the notes file?
- How can I find this and fix it? (I use my calendar extensively, e.g. I paste text-notes and sometimes images (maps) into a calender document)
My Mail and contacts (address book names.nsf) are on Lotus Notes 7.0.3. Nokia PC Suite is 7.1.18.0.
When I sync with the server notes mailfile, I see a counter on the phone screen that gets stuck at a certain number (in my case 80 out of thousandsomething). How can I find out with this information, which entry in my notes calendar creates the problem and aborts sync? Is the number on the phone screen when the counter stops useful?

970A-G45 with latest Bios not read correctly By Amd Overdrive

System is as follows
Motherboard: 970A-G45 Bios is now 1.61 all have been tried
CPU: AMD FX 8120
Memory: AMD Performance Edition 1600MHz 8 gbyte
PSU Corsair GX600
problem is that AMD BEMP profiles are grayed out,With this processor and memory the BEMP profile should be available both AMD and Patriot the makers of the memory say the problem is the bios not being read correctly by AMD overdrive.Now how do we get a bios release that will be correctly read by AMD Overdrive.here are pics of cpu-z and AMD overdrive BEMP.
I used the instructions posted here but the image in the instructions doesn't show either
http://img593.imageshack.us/img593/6560/cpuz1x.jpg
http://imageshack.us/content_round.php?page=done&l=img651/1912/cpuz2j.jpg
http://imageshack.us/content_round.php?page=done&l=img41/2338/amdoverdrivebemp.jpg
ok the links work now had to resize images

Does AMD overdrive start and work on your system, besides the BEMP thing: yes!, so that is not the question or problem here.
Do you have the hardware components that are needed to support BEMP: NO!
Quote
AMD Black Edition Memory Profile –feature is available with the following, validated memory modules:
Vendor: Part #: Supported CPU Models:
Corsair CMD4GX3M2B1600C8 965BE (C2), 955BE, 720BE
Corsair CM3X2G1600C6GT 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2A1600C6 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2B1600C7 965BE (C2), 955BE, 720BE
Mushkin 996657 965BE (C2), 955BE
Mushkin 996601 965BE (C2), 955BE
OCZ OCZ3BE1600LV2G 965BE (C3), 955BE
OCZ OCZ3BE1600C8LV2G 965BE (C3&C2), 955BE
Patriot PGS34G1600LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1600ELKA 965BE (C3&C2), 955BE
Patriot PGS34G1333LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1333ELKA 965BE (C3&C2), 955BE
In addition the system must meet the following requirements in order to enable the Black Edition Memory Profile feature:
790FX, 790GX or 790X AM3 motherboard with BEMP compatible BIOS revision
AMD Phenom™ II AM3 Black Edition CPU
In any case, this is a pointless discussions. I point to the specific parts on the AMD site that have to do with "BEMP" and you ignore that and point to AMD Overdrive stuff, which not necessarely includes BEMP support unless the hardware conditions are properly fullfilled.
Contact:
- AMD Support
- MSI Technical Support
... and Patriot support, this time mentioning that your neither have a "790FX, 790GX or 790X AM3 motherboard" nor an "AMD Phenom™ II AM3 Black Edition CPU".

Not reading correctly?

I just got a 4th Gen Nano for Christmas, etc.
I have another video Nano registered to my computer and don't have a problem with it. However, when I plug this new iPod into the USB to register it, nothing happens except a window pops up with the folders/contents of my E: Drive. Apparently it's not reading it correctly, but how can I fix this so I can use my new iPod?
I have the current version of iTunes installed and I'm running on Windows XP.

The problem has something to do with "iPodService Module has encountered a problem and needs to close". I read another thread somewhere about it, but their problem seemed to be stemming from Norton. I'm using avast! antivirus.
I've tried uninstalling/reinstalling iTunes.
I still had no idea what's wrong. .-.

Table created in Dreamweaver with CSS not positioning correctly

I've created a simple 9 page website using Dreamweaver and CSS. I am no pro but I can edit some in the code. I'm really enjoying the CSS but for some reason I cannot find out why my tables appear perfect in Firefox but not in Chrome or IE. The tables are centered properly but they appear way below where they're intended to be!
I've tried to paste my code but can't, is there somewhere I can post it?
-jrntmd8r88

After struggling with this last night I took a look again this morning and narrowed down and corrected the problem. Basically, this is what happened to cause the issue and how I resolved it. Hopefully it helps others in the future.
Steps
Create project in Windows version of Cp (I was using version 8.01).
For my client's requirements, which are quite unique and complex compared to the typical Cp project, custom quiz questions/scoring had to be developed. Since these are HTML5 (non-responsive) courses, and Javascript is the fastest/most efficient way to do this, I used Javascript extensively for quizzes via the 'Execute Javascript' action. So for quiz questions, each answer is simply a smartshape (transparent, with answer text in it) that triggers the 'Execute Javascript' on click. In addition, on many of the quiz slides there are Edge Animate/HTML5 interactions embedded.
Worked fine on windows upon publish. But when I opened on a new Mac and published, when a question answer was clicked nothing would happen.
Turns out the problem seems to be with the text in the Javascript window. I think it somehow gets corrupted, though it looks fine. I had to literally delete the javascript, save it, and then copy it back in. Once I did that, it works.
I've invested too much time in this project so far, so don't want to risk any more major issues popping up like this, so I switched back to Windows and canceled my subscription this morning. Fortunately I have a license from my employer for Windows and will just use that with Boot Camp.

D20 memory not reading correctly. Bios sees only 20 gigs lenovo diagnostic sees 24 gigs

Ok i have a d20 with one set of dimms not reading in the bios. I have tried using all combinations and it always disables one channel of one CPU not reading in the bios but if I use the lenovo diagonstic it sees all the memory and can also run the quick memory test with no errors. I would really like to get all of the slots to work anyone got an answer for this. Thanks for you help in advance.
Mike

I'm assuming you're following the correct DIMM install order based on the service label on the inside cover? The DIMM numbering is non-standard with regards to the location.
If you think you've narrowed it down to a specific DIMM slot (or pair of DIMM slots), I'd try booting the system with memory ONLY installed in that slot (or slots). Obviously it's not the recommended fill order or anything, but it could be a good test to see if you possibly have a damaged slot or something.
Also, have you been messing with the CPUs at all? Though unlikely, I would guess it's possible that a specific CPU pin in the socket could be damaged as well.

Blogger sites made with Artisteer not loading properly since last update

Blogger sites made with Aristeer no longer load properly, the template is wrong, things do not fit in the template properly, boxes are missing. Sites made with blogger software are fine. Everything is fine on IE and Chrome.

Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

Software for communicating with ipod not installed correctly?

I cant download the new itunes 11.0.1 as keeps coming up with invalid or corrupt signature. So downloaded it onto another laptop and then copied it over. When opening it comes up with the following message "the software required for communicating with ipods and mobile phones was not installed correctly, it asked if you want itunes to repair it and when you say yes it doesnt repair. Tells me to re-install itunes which i cant do. Any ideas?

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

Software required for communicating with iPods not installed correctly

I am trying to do a new iTunes install version 10.6.1 on a Windows 7 64 bit machine. Everything goes smoothly and I get a message saying it installed correctly however, upon starting iTunes I get the following error:
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
I have uninstalled it following the directions, reinstalled it by running as administrator, etc. still the same message. I also notice Quicktime is not getting installed at all.
Please advise.
Thanks in advance.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Musik with Dialog not playing correctly

Hi there.
Music with spoken texts is not played correctly on my T410i with Windows 8 pro installed.
For example, the soundtrack to Kill Bill1
Track 5: Queen of the Crime Council - dialogue excerpt from film
Track 6: "Ode To Oren Ishii" - The RZA
The problem occurs in all music players (iTunes, Windows Media Player, the Windows8 App "Music" also flash based player of Sky.fm have this problem (e.g. http://www.sky.fm/play/altrock) .
Hardware: Lenovo T410i with Nvidia / Intel graphic card combination.
What I've done so far:
* reinstalled Drivers (Conexant 20585 SmartAudio HD).
* reinstalled Codec pack (Klite Codec Pack (32-bit and 64-bit)
* turned off the advanced features (bass management, Virtual Surround, ...) in the options of the speakers
* switched off the detection of communication activities.
* Speaker Setting is "Stereo" (two Speakers)
I have no idea why this happens, as soon as there is a spoken text in the music, it starts sounding bad with echo, cracking noise and the spoken texts are very very silent.
I don’t know how to fix this.
KR Martin

I am having the same problem with my Jam Pack loops. I bought the jam packs a few years ago and have been using them fine with my iBook. I put them on an external drive (trying to keep the iMac HD empty) and dropped the folder on my loops browser. They've worked fine with my iBook for years. I just got a new iMac and, again, dropped the folder on my loops browser. They play fine in the browser, but when I drop them in the timeline I only hear a faint beat.
Any suggestions?
B. Muir

Small size file can not read correctly on other linux

Hi, I am running archlinux 0.8 on my laptop, and there is another linux runs kernel version 2.6.20 with root filesystem of debian v3.1.
I wrote a shell script which reads a small, 49 bytes, only 1 line conf file on my archlinux, it works fine.
But if I copy script & conf files to debian, the script can not read conf file with:
while read f;do; echo $f; done < conf
but `cat`,`more` commands can read it. I have to open conf file with vi on debian and do nothing but :wq rewrite it to make script working.
Both arch & debian use ext3 file system. Could anyone tell me why? thanks.

I think your command is wrong: it works with zsh and doesn`t work in bash. Maybe you should remove extra ';'?
while read f;do echo $f; done < conf

Problems with javascript not working correctly, have firefox version 15.0.1. Javascript enabled in tools option. What else should I be looking at?

Certain websites do not load correctly, the webpage sometimes does not display. Upgraded to current version of Java, this did not solve the problem. The most blatant thing I noticed is that when I hit the plus button to open a new tab, the page that displays displays my nine most favorite websites, all nine have descriptions, but only two or three display the actual web page.
I also have hotmail and when I try to load some pages directly from the e-mail I get the message Javascript needs to be enabled.

Are you using any cleanup software like CCleaner that might cleanup the cache?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java

Issue with battery in settings (not reading correctly)

I am very disappointed in battery life but I am getting NO help from the interal battery meter on the. Any solution from Samsung or Google on this? Check out the screen capture to see what I mean... Says Discharging and is showing wrong info...

Turn the device off then plug it into the AC outlet until it shows it's full. Unplug the device then turn it on. Plug it back in and let it charge. Make SURE in the battery settings it is showing up as Charging(AC) and not Charging(USB). If it says Charging(USB) and it's plugged into an outlet then your cable is faulty.
Ironically both my GSM and LTE versions came with bad usb cords.

Trimmed Quicktime Time code Media Files not reading correctly in CS5+ (works in CS4).

I'm using Prores footage with metadata Timecode inserted into the Quicktime file. Then I edit the Quicktime file, click "Save" and then import the trimmed file into APP CS4. CS4 recognizes the edited clip and displays the timecode correctly (adhearing to the trims made on the file with Quicktime).
BUT, in CS5, when I use the SAME clips, the timecode displays what the untrimmed timecode on the trimmed image. So now, my timecode is OFF.
Really want to figure out how to fix this. Does CS6 fix this issue? Is there a preference or custom setting I need to select in order to have CS5 adhere to the metadata stored in the Quicktime file's timcode information?
Any help would be greatly appreciated!

There is a difference between Save and Save As in QuickTime Player. When you Save after trimming, the trimmed data remains in the file and takes up the same amount of space as before. When you Save As, the trimmed data is not included and you end up with a smaller file.
I don't know why CS5 is behaving differently but it's more efficient to Save As and it will solve the CS5 problem too.

H264 made with FFMPEG not read correctly

Similar Messages

Maybe you are looking for