Handle doc/open event at folder level

Hi,
Is there a way to handle doc/open event at the folder level?

javax.sing.table.AbstractTableModel.addTableModelListener(TableModelListener l)

Similar Messages

Is there a way to respond to Doc/Open events from a folder level javascript?

I'm wondering if there's a way to respond to Doc/Open events from a folder level javascript. If not, is there a way to programatically add a Document javascript to a PDF upon/after export from InDesign?
Thanks-
Jeremy

Bernd,
Thanks for your reply. I take what you write to mean that I can add a document-level javascript manually once the PDF is exported. But this is what I'm trying to avoid.
Ideally, I want to respond to Doc/Open events from a folder level javascript, but I'm not sure if/how I can make an event listener with Acrobat JS. If I can't do that, then I'm looking for a way to programatically add a Document level javascript upon export from InDesign - not manually within Acrobat, once the PDF is created.
Any thoughts?

Unable to open event

i have an event with lots of projects on an external drive which fcpx 10.0.4 refuses to open.
the size of the event is about 800 gb, digitalized vhs-tapes, the work of the last weeks…
when i doubleclick it, fcpx opens it at first, but when the startup window comes to "loading compressor support" i can watch the spinning wheel of death and fcpx hangs up, i have to shut it down.
when i open fcpx via the program-icon, it opens but doesn't show the external drive with my project. it is still on my desktop, when i try to open the event by doubleklicking it - with fcpx open - fcpx says "event cannot be opened". the same with the event in the backup-folder and in the "old versions"-folder.
i made a copy of the external drive (1 tb) and tried the same with the new one, same issue, cannot open event.
one external drive is fw 800, the other usb.
i made a few restarts, i repaired permissions, i deleted preferences (both fcpx and compressor), i used onyx, i reset the power manager, i deleted the last project i made in the event as this may have caused the trobles, still the same.
the work of the last weeks is in danger, i'm worried to lose the projec, any idea is appreciated.
thank you,
wolfgang

hi,
maybe its getting lost in translation, but I'm not understanding quite what you are saying. You say uyou have Projects in an Event? Projects and Events will always be in separate folders and shoukdnt be together.
You cannot open an event or project by double clicking its icon. Rather you boot fcpx by clicking the applicaiton icon. When its opening the application then looks at all your hard drives and looks for the folders 'Final Cut Events" and for Final Cut Projects'. These must be at the root level of your drives ( or in your Movies Folder on the drive where your User account is) or it wont find them.
There have been some other reports here of events and projects not loading on drives that have folders called "video". There might be some other things that cuase it to hang. If you can move all other folders on your external drive into something else just temporarily, and make sure Final Cut Events and Final Cut Projects are visible. Then boot fcpx and see what happens
adam

Defining metadata at the folder level.

We are migrating from Content DB to Webcenter Content 11.1.1.7, using FrameworkFolders.
Our old Content Management solution (Content DB), allowed us to define metadata on a folder level. For example a group of metadata (a category in Content DB) could be defined and applied to a specific folder. When documents are uploaded, the server enforces the metadata to be populated for all documents uploaded to that folder and all child folders.
Webcenter Content seems to behave quite differently. From what I can tell, this is set up in the "Configuration Manager" Admin applet. Metadata fields are defined in the "Information Fields" tab. Sets of fields are defined as a "Rule". Roles are enforced on uploaded content through "Profiles". A given profile is enforced by the user of a "Trigger". The trigger is specified to look at a specific field, which is global to everything on the server. This is all documented here: http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c04_metadata.htm#DAFJDCEH
Having the trigger field be global seems to be very restrictive. We will have several different systems storing content on the server. Isn't this a big limitation of the product?
How can create a rule to enforce metadata to be populated for all content that is uploaded to a folder?
Thanks!

I'd say the answer is: create a folder and assign it a set of metadata (and inherit, if you will).
I don't think WebCenter Content, or UCM, has a concept equal to the mentioned category as described; i.e. an object that represents a metadata settings that can be assigned to 'something'. There are, however, many concepts that are close:
- rules/profiles mentioned in the initial posts - a profile (consisting of rules) may correlate to a "content type". It defines what fields make sense for this particular content item, what is required, default, etc. (relationship between fields). The caveat is that profiles define actually just how content items behave in the GUI; (global) rules can enhance also back-end processing (e.g. fill in an automated contentID identifier, if missing), but in reality they don't define data model
- folders - folders help to define hierarchy on items. As Srinath explained, we can also benefit from propagation of metadata, or inheritance. This is probably the closest concept to the Content DB category, but the holder is not the category, but the folder itself. Keep also in mind that folder is an optional parameter, and metadata inherited from a folder can be overriden for both items and folders
- in URM, where the categorization is more strict is another hierarchical structure; retention category (which can be assigned other settings, esp. disposition rules, and which can contain retention folders)
- yet, another concept that might be useful in some use cases are folios; a folio is an item (XML-file) that has its own metadata, and can reference other content items. However, operations on a folio item OOTB does not affect contained content items, and a content item can be referenced by several folios.
Finally, if no standard concept helps, you may always create your own customization via filters. A filter is a Java piece of code, which can be "hooked" to standard events (like "uploading a file", or check-in as it is called in UCM) and which can do whatever validation you like. For instance, I created a component which checks that an assigned quota on a folder to which an item is uploaded is not exceeded.
I assume that for your use case, you might be good to go with a combination of folders and profiles (a profile setting can also be assigned to a folder as default metadata). Let us know if you get stuck.

Folder level permissions

1) Can the following be executed at a folder level?
     a) doc.AddAnnotation
     b) doc.AddField
     c) field.AddEvent

Thanks!
3)
At folder level: Can one add an EVENT to a field and then as it's code in the event make it call another method.
Example:
ExistingField.AddEvent("onclick", "ExistingFunction()");
// where first param is the event, second param is the Jscript to execute when 'clicked'
function ExistingFunction()

How to handle tab leave event

Hi.
I'd like to handle tab leave event before user selected tab shown.
because I'm making Settings dialog.
So I want to validate tab contents when user leaving the tab.
And stay the tab if invalid user input.
Thanks.

With apologies for the slow reply, I'm currently travelling.
Two things to note:
1) The af:document uncommittedDataWarning flag was designed to stop users navigating away from half entered records. More about this flag can be found here:
http://docs.oracle.com/cd/E23943_01/web.1111/b31973/af_orgpage.htm#CACDDDFH (see point 4)
http://www.oracle.com/technetwork/developer-tools/adf/unsaveddatawarning-096556.html
....please note our documentation from time to time spells this flag wrong with only one "t" in the word committed, so if you're attempting a bulk search check for this (and I'll raise document bugs to get this fixed in the future).
2) On addressing the ADF UI Shell, if you're switching between "pages" in the UI Shell, as separate to switching between dynamic tabs within a single page using the UI Shell, the UI Shell will actually restart the currently running task flow in the page you're returning too. You can verify this by implementing an initializer on your task flow with a log message, and watching when the initializer is called.
In addressing your last question, at this stage I think you need to assess my first answer then come back if you think you sill need to execute the code on the tab click. I also need to know are you talking about the primary level of tabs that represent each page in the UI Shell, or are you referring to the dynamic tabs within a single UI Shell page that hold your task flows?
CM.

How to Open a Specific Folder in the Finder via Shortcut Key

I'm sure this has been covered elsewhere, so sorry for not finding it...
Is it possible to assign a shortcut key to open a specific folder with Automator or AppleScript? There are 4-5 commonly used folders buried 10-11 levels deep on a server and I'd love to have a shortcut key to open those particular folders in the Finder.
Could you give me some assistance?
Thanks!

QuickKeys may work, or you can look on http://www.versiontracker.com or http://www.macupdate.com for other alternatives.
Another option is to create aliases to those folders and store the aliases in a local folder which you can place on your Dock, the Finder window sidebar or toolbar.

My taskbar crashes when I try to open any documents folder. (Windows Explorer, My Library, Documents, Pictures, Music, Videos, Dropbox folder, Skydrive, every folder!)

Hello. I don't know if this is the right category for my problem but here it goes.
Since yesterday, I've been trying to open Windows Explorer folder (which include Documents, Pictures, Videos, Music, Downloads, Computer, Dropbox, Skydrive, etc.) and as a result my taskbar and my background crashes, the folder doesn't open and then my taskbar
and bg goes back to normal. I searched the problem in other forums but the responses are from last year and this is happening since 29/03/2014 (yesterday) so I don't know if this is a new thing or old. I called my sister because she has this same laptop and
asked her if this is happening to her also and she said it is so I'm starting to think that W8.1 needs an update. Idk :(. We have a Dell Inspiron 15 and it's brand new ! I ordered mine last month.
Problem Details:
Windows Explorer Stopped Working
Description
Faulting Application Path: C:\Windows\explorer.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.3.9600.16441
Application Timestamp: 5265dec8
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.3.9600.16496
Fault Module Timestamp: 52b3f283
Exception Code: c06d007e
Exception Offset: 0000000000005a88
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 6268
Additional Information 2: 6268221e00f9b14c7c313c3b93b7b1c8
Additional Information 3: 7b89
Additional Information 4: 7b8924d255daf0419ae3ae354fccfe84
Extra information about the problem
Bucket ID: 85aa1369beebb4641c7856cb8a4724e2 (85906392470)
If anyone can help me with this, I will be forever thankful !

Hi,
Did you make any change to your system recently? To fix this problem, firstly, you can try to use
SFC /scannow command to fix it for test.
If problem persists, just try to boot your system into Safe mode to test if this problem occures. If problem occures, It would be better to use system resotre to revert your system to a former timepoint state.
To find the reason about this problem, you can use Process Monitor
to capture Explorer.exe when open folder or library.
Roger Lu
TechNet Community Support

Applescript to open the Choose Folder dialog box and close the message after moving it

I've been trying to figure out how to get the same functionality as the Windows version of Outlook has so that the open message gets closed when it's moved to another folder.
It seems pretty simple to move a message to a pre-defined folder, but I can't find a way to open the Choose Folder dialog so I could choose the destination folder. I've looked through the dictionary, but couldn't find any direct way to activate the Choose Folder dialog. So I decided to use keystrokes for the job. Here's what I came up with:
on run {}
    tell application "Microsoft Outlook"
        try
            set theMessage to first item of (get current messages)
            set folderID to the folder of theMessage
        on error errMsg number errNum
            set dialogReply to display dialog "Please select one or more messages to file away before running this script." buttons {"Abort"} default button 1
            return
        end try
        -- open the Choose Folder dialog
        tell application "System Events" to keystroke "m" using {command down, shift down}
        repeat
            delay 2
            set currentID to the folder of theMessage
            if currentID is not folderID then exit repeat
        end repeat
        -- Close the active message
        tell application "System Events" to keystroke "w" using command down
    end tell
end run
This is my first attempt to do anything with AppleScript..
Now in addition to using keystrokes instead of Outlook built-in commands to open the Choose Folder dialog and to close the message, I also have another problem. Everytime I run the script from AppleScript Editor, everything runs fine, the message gets moved to the folder I choose and the message also gets closed. When I move the script to "~/Library/Application Support/Microsoft/Office/Outlook Script Menu Items" and start it from inside Outlook, Outlook gets stuck after opening the Choose Folder dialog and I have to force quit Outlook. I added some debuggin to the script and found out that the script keeps running, but I'm unable to select the folder from Outlook and cannot continue.
Anybody have an idea why this is happening?
Regard,
Kris

(For the record)
Unchecking "Submit crash reports" in the Firefox [[Options window - Advanced panel]] General tab simply toggles the default of the "Tell Mozilla about this crash so they can fix it" check box in the Mozilla Crash Reporter dialog (upon crash). It does not turn off the Crash Reporter itself.
Related bug report:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=577221 Bug 577221 - Firefox doesn't remember "submit crash report" check box]
The above information has been added to
http://kb.mozillazine.org/Breakpad#Can_I_disable_Crash_Reporter.3F

Cannot open project: the folder for this project cannot be found cs4

I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.

If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

Acrobat X Standard User: How can I view PDF metadata from a folder level?

Hello All,
This is my first post to this community. I would not be surprised if the answer to my question can be found in a simple search or tutorial. However, I assure you that I have been searching, clicking, reading and even attempting to install new software all morning and have only succeeded in further confusing myself.
I'm running Adobe Acrobat X Standard on a Windows 7 machine. My job includes the management of legal documents of conveyance. All conveyance instruments have a set of unique identifiers such as the county where the deed was filed, the book and page where it is filed, the type of instrument, and the date it was filed. Historically I have tried to jam all of this information and more into the file name of a pdf. For example: "105_Bk109-Pg188_Assignment_05251950" is the name of a file that I have open right now that indicates an Assignment filed in Crockett County, Texas (code 105) at Book 109, Page 188 and recorded on May 25, 1950. I typically work in folders that contain around a hundred similar documents with all of the fields I have described varying. My objective is to begin moving this information into the metadata or properties of the individual PDFs AND then be able to view those fields in Windows Explorer from the folder level. As I understand it, this is not possible. When I began searching for an alternative solution, I found several references to Adobe Bridge and attempted to install it. The installation failed, but more importantly I am not interested in becoming a CC user as I don't feel like it is necessary for what I am trying to accomplish. I'm not working with HD photos or video.
So my question is this: Is there a way (that doesn't involve purchasing and learning Adobe Bridge) that I can modify the attributes/metadata/properties of a pdf, and then see the modifications in a folder viewer without opening the pdf? Thanks in advance for your help.

Thanks for responding. I suspected that my understanding of metadata was incomplete or inaccurate. As I understand it, the metadata for any given pdf can be found by first opening the pdf; clicking File -> Properties, which opens a dialog box titled "Document Properties". The first tab in the dialog box is "Description" and includes the fields File, Title, Author, Subject, and Keywords. The values for these fields are what I'm referring to as metadata. Additionally, from the Document Properties dialog box, clicking on the "Custom" tab allows you to create custom properties and values, which I also considered to be metadata. I have manipulated these fields for a certain pdf as shown in the two screenshots below:
After making this changes, I saved the pdf and closed it. I then navigated to the folder where the pdf is stored using Windows Explorer. As you can in the following screen shot of WE, that the pdf I have made the changes to is the first in the list. The Windows Explorer columns include: Title, Pages, Author, and Subjects, but their values are all blank and fail to show what I have assigned them in the PDF properties (or what I thought was metadata). As for my custom fields, Windows does not give me any kind of option to display those. Windows inability to display something as simple as the number of pages in the PDF is completely baffling to me.
My objective is to be able to modify the standard document properties of a PDF with usable information, those being Title , Author, Subject, and Keywords. I would also like to be able to create the custom properties with additional useful information. I would then like to be able to use a file manager, to view the contents of a folder full of pdfs, similar to the screenshot above, and see the properties and custom field values that i have assigned to the pdfs in columns of the list of pdfs. Windows Explorer is the only file manager I have ever used. It's possible that the solution to my problem could be as simple as changing file managers. It may be that what I'm after is not possible at. Any suggestions would be greatly appreciated. Thanks.

Iphoto 09 open event from picture after search

ok so if I search iphoto 09 by a particular word and find a picture, I can sometimes see the picture is part of an event that has other pictures, but how do I show the whole event? Drives me mad eg If I search for 'tv' I can get a picture (see link below) & see there are 60 other pictures in the folder. However if I right click I can't see any suitable choice to open the entire event. If I double click the event or picture it does nothing if I'm in the situation I show below. (The preferences are set that double click would open event it says). The double-click does open the event if I am looking overall at all the events (ie haven't searched by keyword). I don't have 'show event' as an option when right clicking either (I keep seeing references to this when googling)
eg I click on 'Events' top left (so all events are visible on the main screen) then search for 'tv' in the search box, it displays as above eg I can see there are 60 pictures within that event, yet if I right-click there is no 'Show Event' option. Show event is not even a greyed out option.
https://lh5.googleusercontent.com/-jLjnS81h7vY/VHBWhbCLORI/AAAAAAAAFQM/uQy3MmC5w _U/s800/Screen%2520shot%25202014-11-22%2520at%252009.25.03.png
https://lh6.googleusercontent.com/-Nz5HNx-dEzU/VHBeQEAFV8I/AAAAAAAAFQk/FyrnhULNu wA/s800/Screen%2520shot%25202014-11-22%2520at%252009.57.19.png
I have the Events menu selected (behaves the same if I have Photos as the selected menu):
https://lh3.googleusercontent.com/-qIrE9PZnK5c/VHOAEPv7dyI/AAAAAAAAFRc/XD7F4uXNI oQ/s800/Screen%2520shot%25202014-11-24%2520at%252018.57.05.png

Hello mook,
So if I understand:
1.) The goal is to restore the iPhoto Library from a point before the issues started happening
2.) When you try to go backwards in Time Machine while inside the iPhoto window you get a blank Library when you get to the date range you want.
What to do:
- As you cannot seem to access the iPhoto contents using the iPhoto window I would suggest the following:
1.) Navigate using the Finder to ~/Pictures (or whatever folder you are currently housing your iPhoto Library in)
2.) Rename the current iPhoto Library to something else (Like iPhoto Library Old etc)
3.) While looking at this Pictures window, activate Time Machine and go back in time to a date when YOU ARE SURE iPhoto was working fine and had the images you want
4.) Click on the iPhoto Library in the Time Machine window and click on Restore
-- This will restore the Library from the date in question
-- You will have 2 libraries once the restore is complete. The freshly restored library and the old library. Keep the old library just for safe keeping until such time as you determine you have all the pictures you want. Then you can do whatever you want with it (trash it, etc)
Hope that helps.

File open event 지속에 대해..

SELECT * FROM V$SQLAREA;
SELECT * FROM V$ACCESS;
를 하면
v$session_wait에 "file open" event 와 cpu 사용은 증가되며
조회는 안되고 종료할 수 밖에 없습니다...
(V$ACCESS 는 계속 기다려 보니 200개 정도 였습니다..)
무엇이 문제인가요...

이러한 질문은 OS version, OS word size(32bit 64bit), DB version, DB word size
가 없으면 알아낼 수 없습니다. 찾아보면 8.1.6 버젼에서 problem으로
등록된 것이 보이네요.
그런데 v$sqlarea를 where조건없이 모두 조회할 필요가 있는 것인지
요? 로드가 클 텐데요.
아래처럼 필요한 데이터만 조건을 걸어서 찾으면 안되는 건지요?
# buff_used_sql.sql
Doc
버퍼에서 있는 sql문장의 메모리 사용률 확인
file: buff_used_sql.sql
This script lists all statements that are taking longer than
4 seconds to scan through the buffer cache. The statements
use 500 buffer scans per second, which we have found that
most sites run at.
Note that the number of buffers scanned to achieve our
timings is 500 per second.
SET     LINESIZE     140
COLUMN     BUFFER_GETS     FORMAT     999,999
COLUMN EXECUTIONS      FORMAT      999,999
COLUMN      AVERAGE      FORMAT      999,999
COLUMN      RESPONSE      FORMAT      99,999 HEADING "RTime(Sec)"
COLUMN TEXT      FORMAT      A80 HEADING 'Sql Statement'
SELECT BUFFER_GETS,
EXECUTIONS ,
BUFFER_GETS / DECODE(EXECUTIONS, 0,1,EXECUTIONS) "AVERAGE",
BUFFER_GETS / DECODE(EXECUTIONS, 0,1,EXECUTIONS) / 1000 "RESPONSE",
SUBSTR(SQL_TEXT,1,1000) TEXT
FROM V$SQLAREA
WHERE BUFFER_GETS / DECODE(EXECUTIONS, 0,1,EXECUTIONS) > 20
AND ROWNUM < 10
ORDER BY 3 DESC
* 다음 Query는 Lock과 관련된 테이블을 출력.
column username format a10
column lockwait format a10
column sql_text format a80
column object_owner format a14
column object format a15
select b.username username, c.sid sid, c.owner object_owner,
c.object object, b.lockwait, a.sql_text SQL
from v$sqltext a, v$session b, v$access c
where a.address=b.sql_address and
a.hash_value=b.sql_hash_value and
b.sid = c.sid and c.owner != 'SYS'
( 위의 Query를 실행하면 다음과 같은 결과가 출력된다.
USERNAME SID OBJECT_OWNER OBJECT LOCKWAIT
SQL
LTO2 6 LTO EMP C3D320F4
update lto.emp set empno =25 where empno=7788
LTO3 9 LTO EMP C3D320C8
delete from lto.emp where empno=7788
LTO 5 LTO DEPT
insert into lto.dept values (60,'PROGRAMMER','LOS ANGELOS')
여기서는 USERNAME에 나와있는 유저가 OBJECT에 나와있는 테이블을 수정하려고
함을 나타낸다. LT02,LT03는 LT0가 Commit,Rollback 하기를 기다리고 있음을 알
수 있다. 하지만 여기에는 가장 최근의 DML 명령 하나만 나와있기 때문에 여기
나온 명령이 반드시 Lock을 걸고 있는 명령이라고 단정지을 수는 없다.
관련된 프로세스
* 다음 Query를 행해 보면 프로세스와 관련된 정보를 얻을 수 있다.
column "ORACLE USER" format a11
column SERIAL# format 9999999
column "OS USER" format a8
select substr(s.username,1,11) "ORACLE USER", p.pid "PROCESS ID",
s.sid "SESSION ID", s.serial#, osuser "OS USER",
p.spid "PROC SPID",s.process "SESS SPID", s.lockwait "LOCK WAIT"
from v$process p, v$session s, v$access a
where a.sid=s.sid and
p.addr=s.paddr and
s.username != 'SYS'
* 위의 Query를 실행하면 다음과 같은 결과가 출력.
ORACLE PROCESS SESSION SERIAL# OS USER PROC SESS LOCKWT
USER ID ID SPID SPID
LTO 19 5 31 usupport 17312 17309
LTO2 25 6 43 usupport 17313 17310 C3D320F4
LTO3 26 9 1 usupport 17314 17311 C3D320D8
글 수정:
민천사(민연홍)

Override event handler for document events in LiveCycle

I would like to have an email notification when a user opens a policy-protected DRM pdf. Is there a way to override the event handler for Document Open events?
Or perhaps there is a way to access the event database- where can I find this information?

Thank you so much for your reply. I have created an external authorization and am following the steps outlined here: http://help.adobe.com/en_US/livecycle/9.0/programLC/help/index.htm?content=001479.html
I have deployed my jar and restarted JBoss. However, now when I try to create a new policy using my external authorization, I do not see an option to add it on the create new policy page. I see only sections for Users and Groups, General Settings, Advanced Settings, and Unchangeable Advanced Settings. Could you please tell me how to add the external authorization?
Also, in the component.xml file, I followed the sample and kept this line: <component-id>com.adobe.livecycle.samples.externalauthorization</component-id>
Should that be changed? If so, to what?
Thanks.

File System in Folder Level Script

Is it possible to access the File System in a Folder Level Script. For example I want to check if a certain file exists in the folder containing active document & load info from that file in a dialog box.
Thanks in advance

But I don't want to add any content, bloat to the doc.
I may just try to write a legit plug-in, since I have a little experiance writing C++ plug-ins for InDesign. But I wold like to just confirm that this functionality does not exist in Acrobat with scripting (due to sandboxing etc).
Thanks

Handle doc/open event at folder level

Similar Messages

Maybe you are looking for