Handling EDIFACT Files in File adapter without going for Seeburger adapters

Hi Guys,
Is it possible to convert the EDIFACT files into XML using File content conversion?
We got some requirement where we need to exchange EDIFACT files like DESADV and ORDERS with our partner. I know we can handle these EDI formats using Seeburger adapters like BIC,AS2.
I'm just wondering is it possible to handle these files using FCC in File adapter or Is it recommended to go for Seeburger?
Thanks
Deepthi

Hi,
its better to opt for seeburger for EDI data processings..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ed5d5b-b188-2c10-76a2-997a616e48a9
http://www.cbs-consulting.com/EN/Services/ProcessesApplications/SAP__TechnologyConsulting/OpenPI/OpenPI__n,naviExpand=.html__nnn=true
Check the above links can be helpful..
HTH
Rajesh

Similar Messages

  • How to improve select stmt performance without going for secondary index

    Hi friends,
    I have a select statement which does not contains key fields(Primary index) in where condition. And I have to improve that select stmt performance without going for the secondary indexes.
    Can you plese suggest the alternative way for this?.
    Thanks in advance,
    Ramesh.

    Hi,
    If , possible create a secondary index opf your own But if you have restriction on this, try to arrange the fields in where clause in the same order as they appear in the very table.
    This will help the performance a bit.
    Another issue, If your table doesn't contain any critical data or data in them are not updated frequently, you may go for Bufferring . it is a good alternate of Indexing with above limitations.
    For details in bufferring , check, and all the sublinks.
    [concept of buffering|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f244446011d189700000e8322d00/content.htm]
    Regards,
    Anirban

  • Is there a way to download a file into an ipad without going through itunes?

    I am trying to do it in a similar way to that of an Android device. I would like to have someone with an Apple device scan a QR code which pulls a zip file on to their device and then from there (without using iTunes) extract and load the file into an app already installed on the device.
    Is this possible? What is the fastest, easiest, most effecient way to do this?

    I am trying to do it in a similar way to that of an Android device. I would like to have someone with an Apple device scan a QR code which pulls a zip file on to their device and then from there (without using iTunes) extract and load the file into an app already installed on the device.
    Is this possible? What is the fastest, easiest, most effecient way to do this?

  • Can i delete all AAC files at once without going through my whole library?

    Is there a way i can delete all AAC files off my itunes without going through my whole library and deleting them one by one. If deleting them at once isnt an option is there a way to see all the AAC files at once???

    Put your library in list view and sort on the Kind column.
    tt2

  • How to apply input file name to output file in file adapter

    Hi Friends
    In my file to file scenario,i want to use input file name to output file by using adapter specific attributes,for this i have java code.Please suggest me how can i use this java code in mesg mapping and to which field i need to mapping this.
    Thanks
    pullarao

    Hi Pullarao,
    I have two questions ...
    1. Are u want the static file name in the target file?
    if yes...then follow the Bhavesh instruction.
    2.If u want a dynamic file name in the target file using UDF....then your UDF should mapped to the <b>root element</b> of target structure.
    /**********UDF********/
    Imports: com.sap.aii.mapping.api.*;
    Parameter: String filename
    String filename;
    filename = fileName + ".DAT";
    DynamicConfiguration conf = (DynamicConfiguration) container
           .getTransformationParameters()
           .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
    conf.put(key, filename);
    return filename;
    /*******END UDF*******/

  • Flat files required for Universal Adapters HR Payroll

    Hi Folks
    we are implementing new HR Analytics using Universal adapters HR Payroll subject area.
    where can i get the Flat files which are designed and delivered for Universal Adapters which contains the Field names etc.
    i searched in web and found no clue of it and neither on Metalink.
    please help
    thank you
    kumr

    Data lineage for 795 , Search for doc id 735950 :
    OR
    https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=735950.1&h=Y.
    796 :
    Oracle® Business Intelligence Applications ETL Data Lineage Guide Release 7.9.6 (Doc ID 829385.1) is now avalaible on Metalink3.
    Below is the URL,
    https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=829385.1
    rm

  • Is it pssbl Psting 2 rates to 2 Co codes w/out going for 2 contract model

    Hi Gurus,
    I have a requirement, my client want to post two rates in a billing schema under two differnt co codes without going for two contract model, I see a problem in Account determination, I dont see any other solution within Billing Module, any suggestions  this Please.
    Thanks
    Yash.

    Yash:
    Using billing master data, it is only possible to post to a single company code.
    regards,
    bill.

  • File Content conversion at the sender adapter without Key field

    Hi All,
    I have a requirement ....We are using Message Transform Bean at the sender adapter (we are not going for FCC as we are tranforming a decryption) ..its is a flat file...
    we dnot have a key field for one of the node .....we have total 5 nodes under parent node and one of the node does not have key field ....
    NOTE: I guess we have to do either Java mapping or XSLT ..but not getting proper weblogs with program...
    and not well versed with coding...i got few codes which were either not fulfilling requiremment or they use stream tranformation where it is decaprecated in NWDS and does not allow to compile it properly .
    Can somebody get me a code for Java which uses Abstract tranformation ...which can full fill below requirement
    parent node
                  Node1
                       node 1a
                       node 1b
                  Node 2
                  Node 3
    Input Flat file is in below format
    example:
    Employee Headre Flat files
    Employee Detail Flat Files(this repeates numerous times as much as number of employees)
    Employee  Trailer Flat Files
    Loan Headre Flat files
    Load Detaisl Flat Files (this repeates numerous times as much as number of employees)
    Loan Trailer Flat files
    Assitance much appreciated thanks .
    Regards
    Kiran

    Hi Stefan,
    I will rephrase the question i guess its communication gap...
    1) we have an existing interface in 3.0..we are not copying the same interface to 7.1 as it was not according to standards and they are phasing out that system.
    2) In 3.0 they are reading the Flat files under one record .. the structure is as follows:
    Parent Node
               Node
                   Row
    They are reading all the flat files row by row.
    and even in receiver they are reading in the similar fashion
    3) In the current structure according to the FS we have to create a structure defined by them which is as below
          Employee
              Header
              Details   node 1
                 Details  node 1a
                  Details  node 1b
              Trailer
              Loan Header
              Loan Detail
              Loan Trailer
    Receiver structure is
    Employee
          Node (this will have the receiver fields which is about 30 fields)
    4) We have pulled a sample file from 3.0 for the existing interface as we din get the sample file for existing one in FS and Iam not sure whn are they gonna send it.
    5) In the existing interface payload we have everything matching even the field lengths and postions and even key fields and key fields we got from the FS
    6) problem is we donot have key fields for the Details node 1a and 1b even in FS or the existing payload and we got an update from the FS consultant that we will be receiving these fields but without keyfields...
    see i donot have any problem taking out the details 1a and 1b out of the details header and create the structure ,,,,but the main issue is without key field we will not be able to generate the 1a and 1b nodes or read it in the FCC or MTB (i have to use MTB as we are decryting the file from the sender).
    Or is there any other method apart from java mapping or module development to handle these files

  • Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?

    Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
    In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”.  Is there a way to get around this?
    Any advice would be greatly appreciated, thanks so much!

    You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all.  It also won't be easy when the time comes to relocate it all to different drives.
    You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library.  Next read about how to selectively consolidate items to the external drive.
    Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
    "...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
    Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links.  If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
    If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences.  Changing media folder preferences only applies to new files added, not old ones.
    Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • Send attachment via Receiver FILE/JMS adapter without using any Mapping.

    Hi,
    R/3 program creates one (encoded) text file, which I want to send via Proxy to JMS adapter without any mapping or FCC.
    Note: I don't want to use File adapter to pick the file from R3 dir and then send it to JMS.
    Reference: I have gone through below mentioned blog which produces the attachment in the XI payload but I am not able to write the same attachment to my XI dir using Receiver File adapter (File adapter is just for testing actual adapter will be used as Receiver JMS adapter).
    /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
    Regards,
    Sarvesh

    > note sure why you want to complicate things here
    Actually the idea was to explore the possibilities of "Proxy with attachment". And I also wanted to confirm with experts like you before going to other options. Anyway it seems it's only possible with mail adapter.
    Reason for exploring above possibility: Since ABAP team has to create one text file and encode it, so we thought to call the outbound proxy in the ABAP program to send the same file as an attachment and then simply send it to JMS. Which is quite obvious thinking when you don't want to manage a share directory between R3 & XI or don't want to manage FTP user and pwd.
    > i think the simplest thing is to go for a simple file to jms configuration unless you have any specific reasons for not doing so.
    This we already kept in our mind as a last option in case if above thing is not possible then we can easily do it by this way.
    Thanks a lot for suggestion.
    Regards,
    Sarvesh

  • Error handling in File - XI - SOAP scenario without BPM

    Hello!
    We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
    We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
    We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
    I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
    Regards, Tanja

    Hi Tanja,
    >>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
    I think, you should check that out. It is assumedly only 2 days work to build a scenario:
    IDoc -> BP
    BP <-> SOAP/HTTP
    BP -> IDoc (Acknowledgement)
    In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
    Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
    >>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
    Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
    Filling of ALEAUD fields:
    E1ADHDR/MESTYP: original message type
    E1ADHDR/E1STATE/DOCNUM: original IDoc number
    E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
    E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
    I ve done such a scenario several times. That works without any problems.
    Regards,
    Udo

  • How to handle a fixed length file without newline?

    Hi Experts,
    I'd like to handle a fixed length file without newline by sender file adapter.
    A file like following.
    It contains three recores."AAXBBBXCCCCX" is one record.
    AA1BBB1CCCC1AA2BBB2CCCC2AA3BBB3CCCC3
    I tried that following two parameters set. But only first recored was read.
    fieldFixedLengths
    fieldFixedLengthType
    Please tell me how to handle.
    Thanks
    Shinya Kawagoe.

    For this case we wrote a simple Adapter Module inserting an end of line character after an offset.
    This way it can be reused in many interfaces.
    And reading the whole file may not be an option in case of large source files. May cause performance / memory issues.
    eolbean.offset = <recordLlen>
    XMLPayload xmlpayload = msg.getDocument();
    byte[] content = xmlpayload.getContent();
    byte crlf = 0x0A;
    int current = 0;
    ByteArrayOutputStream baos = new ByteArrayOutputStream();
    int lines = content.length / recordLen;
    do
         lines--;
         baos.write(content, current, recordLen);
         if (lines > 0) // if other lines, eol required
              baos.write(crlf);
              current += recordLen;
    } while (lines > 0);
    xmlpayload.setContent(baos.toByteArray());
    baos.close();
    Audit.addAuditLogEntry(key, AuditLogStatus.SUCCESS,     MODULE + " Done EOLing.");

  • How to handle large data in file adapter

    We have a scenario Proxy -> PI -> File Sever using File adapter.
    File adapter is using FCC for conversion.
    recently we had wave 2 products live and suddenly for this interface we have increase in volume of messages, due to which File adapter is not performing well, PI goes slow or frequent disconnect from file server problem. Due to which either we will have duplicate records in file or file format created is wrong.
    File size is somewhere around 4.07 GB which I also think quite high for PI to handle.
    Can anybody suggest how we can handle such large data.
    Regards,
    Vikrant

    Check this Blog for Huge File Processing:
    Night Mare-Processing huge files in SAP XI
    However, you can take a look also to this Blog, about High Volume Messages:
    Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
    PI Performance Tuning Best Practice:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7?QuickLink=index&overridelayout=true&45896020746271

  • How can  I checkout an existing file from CVS without going through the wiz

    How can I checkout an existing file from CVS, that is not already in my local jdev, without going through the wizard and checkingout everything?

    You can't. AI doesn't produce .PLT files.

  • How to handle file on application server without coading?

    HI all,
    can anybody tell me How to handle file on application server without coading? Is there any solution?
    Thanks in advance.

    > can anybody tell me How to handle file on application server without coading? Is there any solution?
    what is that you want to handle. what you do if you don't code ...

Maybe you are looking for