Handling lsmw recording for multiple items
how to handle one header and multiple line items using lsmw recording. can anyone please send the code for that for iw31 transaction.
Regards,
Sridhar
Hi Sridhar,
You have to define two structures. One as header and the other as Its subordinate in Maintain Source Structures.
Then you can define what are all the fields at header level and what are the fields at Item level in maintain Source fields.
Then you can map the corresponding fields to the target structure in the Maintain fixed values, translations, user-defined routines step.
Regards,
Ravi
Similar Messages
-
LSMW Recording for multiple line items
Hello Gurus,
I just wanted to know if task list has more than one operation can be loaded thru LSMW recording ? If yes,
COuld anyone tell me the process of recording step by step as I am new to recording and not sure what is the flow.
I have created spreadsheet with some data to test and went into LSMW and assign the mode as recording and also had given the values in the respective tcode and save it..after that do I need to perform all the 14 steps ?
Pls advice
MaheeHi
Please go through the below document. It is difficult to explain you completely.
LSMW while creating first 6 steps need to be once. Later on same LSMW can be used directly from step 7.
The below explain is for some other tcode. but steps will remain same in LSMW for your tcode.
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc -
How do I update grouping or description for multiple items?
As the question implies, I would like to update information in the Grouping and Description fields for multiple items as a way to keep things organized. What I have discovered is that there are some quirks in the new Get Info window that were not in past implementations, which are completely inexplicable and nonsensical to me.
For instance, when you open the Get Info window for an item that has no information in, for instance, the Grouping field, you will not see a Grouping input field, as in this screenshot. The Grouping field should be where the bottom arrow is. Notice also that the Description field is available. I will get back to that in a minute.
If you manually double-click into the Grouping field on the main iTunes screen, you can enter the information there. Then, when you open the Get Info window, ta-dah! The field magically reappears, as in the screenshot below.
The trouble comes when you want to edit this field for multiple tracks. If you select multiple tracks, and they do not all have the Grouping field already populated, the field does not appear. What this means is that you are forced to manually enter the information for every track! This is completely unacceptable when you need to edit information for, as in my case, 122 tracks. The following image shows the Get Info window that appears after selecting two items, one with the Grouping field manually populated, and one with no info in the Grouping field.
Not only has the Grouping field disappeared, but the Description field, as well. Thanks, Apple, but I think I can decide for myself whether or not to populate these fields for multiple items. Let's get 'em back, huh?
SO… does anyone know of any valid method for accomplishing this task? Without manually entering the same information in hundreds of fields? This is the future; computers are supposed to do these monotonous tasks for us, aren't they?
Oh, please don't suggest Option-clicking to open the older, better, Get Info window, as Apple has decided that we should not have that option any longer. We apparently have to organize our music their way. Think different!The Add Field button was in the editors of 12.0.1 (where the new-style editors had a very "half-finished" feel) - it is not there in 12.1. Apple have determined which metadata fields should be available for each kind of media, with no option for the user to modify this. In Apple's own words: "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item."
The only options are:
temporarily change the media kind (Options tab) to one that includes the field you want to add values to, enter those values, and then change the media kind back again
make the relevant fields visible in an appropriate list view and edit values there - the big limitation being that you can only do this one item at a time
I can see - to a degree - why Apple may have made some limitations so that metadata elements are available based on their relevance to different media kinds. However, one of the issues mentioned above seems like a bug - if a single audiobook file can have a Description tab, I see no reason at all for that not to be available for multiple items of the same kind.
If not already done so, report these issues and dissatisfaction with the "new" metadata editors in 12.1 (and the absence of a "back door" for the old-style ones) using Apple's iTunes feedback page. -
How to create production order for multiple items having common raw materia
Dear all,
We are running a sheet metal fabrication company at Vadodara Gujrat.
Please guide us how to create single production order for multiple items using single raw material??
For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
Right now we have to create 5 production order to produce above 5 items of single sales order in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
Kindly guide us how to solve the problem.
Thanks.
RUPESH +91-9227744273
WEB : www.gorasia.co.inHi Rupesh Gorashiya,
This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
Thanks,
Srujal Patel -
MRP - Single Purchase requisition for multiple Items
Hi
We have recently introduced MRP module in SAP .In some specific scaeanrios , we want to create a single Purchase Requisition for multiple items .Standard SAP generate different Purchase requisition for each item
Is there any way outSandeep,
This topic has been covered numerous times in this forum and in the MM forum. You evidently have not used the search feature. There are thousands of posts in these forums, and the search function will be very helpful for you in future questions.
To answer your question, No, nothing is available to make standard SAP MRP create Purchase requisitions for multiple items.
Most companies address this issue during the conversion of Purchase Requisitions to Purchase orders. During this process, you can add many items to a single purchase order.
Rgds,
DB49 -
Get Info..for multiple items where's THaT preference ?
The 1st few times I'd try to Get Info for multiple items , I'd get one window opened, and could make , say , 12 .aiffs open w/ iTunes rather then QuickTime. [ and even THaT seemed to change at the point of the latest iTunes/QTime upgrades...now QTime Pro is in charge ! ]
My point is : I like to get that one window for multiples, which used to come randomly, and not 12 seperate windows. Where DoeS one control that ?
-=TIA=-
~~~=DaveActually it's a function not a bug.... If you do GetInfo on more than 10 items it opens a "group" pane, otherwise it opens individual windows. Unless you want to count items the reliable way is to use Show Inspector instead (add the option key). I find Inspector more useful anyway, so changed the Keyboard shortcut to make Inspector the default of Command-I.
Francine
Francine
Schwieder -
Is it possible to run single workflow instance for multiple item changed or created?
I have created a SharePoint Designer 2010 approval workflow and I am starting this workflow on item created and modified . Now when I am adding and updating multiple items it is starting workflow for each item but I want to start only one workflow for all items.
I think it is possible in workflow 2013 but i want to use in
workflow 2010.
Is this possible? if yes then how?Hi Resham,
From your description, my understanding is that you want to only start a workflow instance when multiple items are added or updated.
Per my knowledge, if we set workflow start on item created or modified, when we add or update multiple items, SharePoint will create a workflow instance for each item, it is unable to just create an instance for multiple items. It is same
between SharePoint 2010 workflow and SharePoint 2013 workflow.
You said it is possible in workflow 2013, do you have any references?
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
LSMW Recording for CLW1 - Multiple entries
Hi,
I am doing a recording in LSMW for Tcode CLW1. This I thought was relatively simple but I have an issue with the second screen after the first screen is processed. The second screen has multiple entries for this Hierarchy level. I am reading an excel spreadsheet that the users created for the Hierarchy level assignments. There are multiple records for the same Hierarchy level but with different Hierarchy level assignments that need to populate the second screen. Also, I don't know how many entries this second screen will take for the HL assignments. I know one of the business users told me one Hierarchy level has 98 different HL assignments! I have searched on the internet and in the forum to try and find the resolution to this problem, with no luck yet. I am hoping someone out there has had this same issue. I know I can add a loop to the LSMW code but I'm not sure how to handle it. I am new to LSMW (Also ABAP only a year) and am learning but need a little guidance if possible or maybe some code examples.
Thanks for you time and knowledge in advance!Hi,
The same problem we have faced. As it is having multiple entries in second level. It is easy to do with BDC Program than LSMW. U can use table control logic in BDC, So that You can easily upload the data.
Rewardpoint if useful.
Regards
(YUGANDHAR.P) -
LSMW recording for different numbers of materials
Dear all,
In the LSMW recording-trcode at VBO1- I enter material codes. But the number of material codes are changeble. For instance for a customer I can enter 5 material codes; for another customer I can enter 12 material codes. For this reason,
I created recording template for 15 materials.
When I run the LSMW it gives errror. because I entered 3 material for a spesific customer. It wants other 12 material codes.
As result;
How can I create a template for various numbers of materials?
For example
customer1 I want to run LSMW for 3 materials
customer2 I want to run LSMW for 5 materials.
ThanksHi
I am not exactly sure of the problem, but you have 15 material columns refering to the line items possible in ALL sales orders/contracts. Ensure that you have a ZERO in the colomns not being posted to. The zero in Excel has to set to text I think, but check the SDN for further on that matter. When you save as a text file, or CSV file, open it with wordpad. You should see the 0 there, if not search SDN.
Something else you can do is the have the field names that become you source field in the LSMW. See Maintain source fields in the LSMW. Use the field names that you have given there as the excel file's header line. i.e. line 'A'. When you select your file to be loaded under 'specify fields', tick the box : - Field names at start of file.
It will then only take the amounts that are there and not put the amount in the next place. I am not sure with recording in SD, but record the item numbers from a static 10,20,30,40,50 .....ETC TO 150. Then have source fields for all 15 line items.
You could have another material created as a non-valuated material and so it won't post anywhere. Add this material where necessary.
Hope this is of help
Kind regards
Dawn -
Does anyone know how to set up a drag and drop activity where
you can have 1 target that multiple items get dragged to? For
example, an activity where you would drag multiple images into a
trash can.
I've tried, and it seems like once one items goes into the
target, nothing else works because its going on top of the first
item.
TIA!!!OK, I'm having trouble again. I need multiple items to drag
to one target. I'm putting all my actionscript in the same frame,
and here's how it looks:
stop();
name_mc.onPress = function():Void {
this.startDrag(true);
name_mc.onRelease = function():Void {
this.stopDrag();
if (eval(this._droptarget) == safe_mc) {
this.swapDepths(this._parent.getNextHighestDepth());
this.removeMovieClip();
address_mc.onPress = function():Void {
this.startDrag(true);
address_mc.onRelease = function():Void {
this.stopDrag();
if (eval(this._droptarget) == safe_mc) {
this.swapDepths(this._parent.getNextHighestDepth());
this.removeMovieClip();
And I'm getting the following error message:
**Error** Scene=Recap, layer=actions, frame=1:Line 21:
Statement block must be terminated by '}'
address_mc.onRelease = function():Void {
**Error** Scene=Recap, layer=actions, frame=1:Line 27: Syntax
error.
Total ActionScript Errors: 2 Reported Errors: 2
Do you know what I'm doing wrong? -
Can't change the 'compilation status' for multiple items in iTunes 8.
Hi there,
I've got an issue regarding the disappearance of the compilation 'tick box' when changing multiple items. Its there when you click on 'get info' for the individual track but its no longer there (in iTunes 8) when I want to change the compilation 'status' for multiple tracks at a time.
In iTunes 7 I selected all the tracks and changed their compilation status by accident, but now, in iTunes 8 I can't change this without going through my library, track by track!.
Please help.
Thanks,
FredMultiple Get info now has tabs - look on the options tab.
-
Purchasing info records for Cost item
Hi Experts,
Is it possible to havea PIR created for a cost item where purchase order is to be created as a cost purchase order & gl & cost center to be entered.
As per my knowledge we need to have atleast material no. to get info records created.
What will happen in the case of material which are not having material code & consumed against cost center.
Are we able co create infor records for such materials.
Thanks,
KiranHi,
I am not sure about your requirement ...
But we can create info record for material group if,material code is not available
check following link
[http://help.sap.com/saphelp_470/helpdata/en/75/ee107055c811d189900000e8322d00/content.htm]
Regards
Kailas Ugale -
Purchasing info records for PO-items without material master
Hi gurus,
I would like to have the system automatically determine certain settings (e.g. reminder/urging data).
For PO-items with material master there is no problem, because all information can be stored in the purchasing info record, and are automatically found when I enter the material number.
For items without material number/master I tried to generate a info record for the material group. When I enter the no. of the info record, everything works fine. But the info record is not automatically found, if I only enter the material group no.
Is there any way to make the system find the info record by itself?
Thanks
AliciaThanks to both of you!
Priyanka:
How can you create a source list for a material group? I thought this was possible for materials only!?
Of course, you cannot have more than one info record at a time for a material group. But one would be enough for me...
Dhruba:
Thanks for the advice, but I know how to manually select a info record. The point is, I'd like to have the system determine it according to the material group I enter.
Any other ideas?
Alicia -
For multiple item selection in Table
Plz use this code and paste it in perticular event of button. when u excute the application ,To select multiple items plz catch shift in keyboard otherwise u can select only single item.
int n = wdContext.nodeProducts().size();
int leadSelected = wdContext.nodeProducts().getLeadSelection();
// loop backwards to avoid index troubles
for (int i = n - 1; i >= 0; --i) {
if (wdContext.nodeProducts().isMultiSelected(i) || leadSelected == i) {
wdContext.nodeProducts().removeElement(wdContext.nodeProducts().getElementAt(i));Hi Vishal
Thats the way the webdynpro table has been designed to work for multiple selection...on click of the Ctrl key or Shift key. There is no other alternative for this.
What would your question be?
Thanks
oj -
LSMW (recording) for Z - Tcode
Hi experts,
Is it possible to do LSMW(recording type) with Z T-code... or not...
Thanksin advance,
Anthyodaya.Hi,
Yes it is possible to do recording for ZTCODE,
In the first step of the LSMW when you select
the radio button - Batch Input Recording then by
giving a Zname for your recording then entering
it will again ask for the recording name and the
TCODE name there you can specify your ZTCODE name.
Hope it helps
Regards
Mansi
Maybe you are looking for
-
ICan you create and link Templates in DWCS4 after all the pages are built as HTML?
I used Dreamweaver CS4 to create a website(about 50 pages). Only after completing it did it occur to me that I should have made the pages using Templates . There are certain areas (footer, navbar, header) that will need to be globally updated occat
-
Full screen preview drops frames
Hi all, A continuation of the thread I opened here (with hardware specs for information): http://forums.adobe.com/thread/657008?tstart=0 Whilst I resolved the tearing issue secribed in the previous thread I still can't get smooth playback on the thir
-
After a system reboot, Firefox would not open. I opened the task manager, and saw that Firefox was using alot of memory, and was using 50% of the CPU. I ended the process, and restarted. The situation just repeated several time. I uninstalled Firefox
-
I want to create an iPad app with multiple issues of the same magazine inside it
I want to create a digital magazine for iPad. I know with Digital Publishing Suite I can create apps for iPad. But there is a problem. Is not clear in the website if with the Single Edition I can create an app that contains all issues of the magazine
-
Review Activity (RA) Approval Condition is Changing
Hello everyone, I am running SCSM 2012 R2 version 7.5.3079.0 (no CUs). I am having an odd issue where it seems as though the approval condition is changing on review activities. I can't seem to figure out if I've done something or if there is somet